207 resultados para Industrial location.
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
This paper assesses empirically the importance of size discrimination and disaggregate data for deciding where to locate a start-up concern. We compare three econometric specifications using Catalan data: a multinomial logit with 4 and 41 alternatives (provinces and comarques, respectively) in which firm size is the main covariate; a conditional logit with 4 and 41 alternatives including attributes of the sites as well as size-site interactions; and a Poisson model on the comarques and the full spatial choice set (942 municipalities) with site-specific variables. Our results suggest that if these two issues are ignored, conclusions may be misleading. We provide evidence that large and small firms behave differently and conclude that Catalan firms tend to choose between comarques rather than between municipalities. Moreover, labour-intensive firms seem more likely to be located in the city of Barcelona. Keywords: Catalonia, industrial location, multinomial response model. JEL: C250, E30, R00, R12
Resumo:
This paper contributes to the existing literature on industrial location by discussing some issues regarding the territorial levels that have been used in location analysis. We analyse which could be the advantages and disadvantages of performing locational analysis at a different local levels. We use data for new manufacturing firms located at municipality, county and travel to work areas level. We show that location determinants vary according to the territorial level used in the analysis, so we conclude that the level at which we perform the investigation should be carefully selected. Keywords: industrial location, cities, agglomeration economies, count data models.
Resumo:
This paper surveys recent evidence on the determinants of (national and/or foreign) industrial location. We find that the basic analytical framework has remained essentially unaltered since the early contributions of the early 1980's while, in contrast, there have been significant advances in the quality of the data and, to a lesser extent, the econometric modelling. We also identify certain determinants (neoclassical and institutional factors) that tend to provide largely consistent results across the reviewed studies. In light of this evidence, we finally suggest future lines of research.
Resumo:
Empirical studies on the determinants of industrial location typically use variables measured at the available administrative level (municipalities, counties, etc.). However, this amounts to assuming that the effects these determinants may have on the location process do not extent beyond the geographical limits of the selected site. We address the validity of this assumption by comparing results from standard count data models with those obtained by calculating the geographical scope of the spatially varying explanatory variables using a wide range of distances and alternative spatial autocorrelation measures. Our results reject the usual practice of using administrative records as covariates without making some kind of spatial correction. Keywords: industrial location, count data models, spatial statistics JEL classification: C25, C52, R11, R30
Resumo:
This paper tries to resolve some of the main shortcomings in the empirical literature of location decisions for new plants, i.e. spatial effects and overdispersion. Spatial effects are omnipresent, being a source of overdispersion in the data as well as a factor shaping the functional relationship between the variables that explain a firm’s location decisions. Using Count Data models, empirical researchers have dealt with overdispersion and excess zeros by developments of the Poisson regression model. This study aims to take this a step further, by adopting Bayesian methods and models in order to tackle the excess of zeros, spatial and non-spatial overdispersion and spatial dependence simultaneously. Data for Catalonia is used and location determinants are analysed to that end. The results show that spatial effects are determinant. Additionally, overdispersion is descomposed into an unstructured iid effect and a spatially structured effect. Keywords: Bayesian Analysis, Spatial Models, Firm Location. JEL Classification: C11, C21, R30.
Resumo:
This paper considers the estimation of the geographical scope of industrial location determinants. While previous studies impose strong assumptions on the weighting scheme of the spatial neighbour matrix, we propose a exible parametrisation that allows for di fferent (distance-based) de finitions of neighbourhood and di fferent weights to the neighbours. In particular, we estimate how far can reach indirect marginal e ffects and discuss how to report them. We also show that the use of smooth transition functions provides tools for policy analysis that are not available in the traditional threshold modelling. Keywords: count data models, industrial location, smooth transition functions, threshold models. JEL-Codes: C25, C52, R11, R30.
Resumo:
Durant el segle XIX, l'economia espanyola va transitar per les primeres etapes de la industrialització. Aquest procés es va donar en paral·lel a la integració del mercat domèstic de béns i factors, en un moment en què les reformes liberals i la construcció de la xarxa ferroviària, entre d'altres, van generar una important caiguda en els costos detransport. Al mateix temps que es donava aquesta progressiva integració del mercat domèstic espanyol, es van produir canvis significatius en la pauta de localització industrial. D'una banda, hi hagué un augment considerable de la concentració espacial de la indústria des de mitjans de segle XIX i fins a la Guerra Civil, i d¿altra, un increment de l'especialització regional. Ara bé, quines van ser les forces que van generar aquests canvis? Des d¿un punt de vista teòric, el model de Heckscher-Ohlin suggereix que la distribució a l'espai de l¿activitat econòmica ve determinada per l'avantatge comparativa dels territoris en funció de la dotació relativa de factors. Al seu torn, els models de Nova Geografia Econòmica (NEG) mostren l'existència d'una relació en forma de campana entre el procés d'integració econòmica i el grau de concentració geogràfica de l'activitat industrial. Aquest article examina empíricament els determinants de la localització industrial a Espanya entre 1856 i 1929, mitjançant l'estimació d¿un model que combina els elements de tipus Heckscher-Ohlin i els factors apuntats des de la NEG, amb l'objectiu de contrastar la força relativa dels arguments vinculats a aquestes dues interpretacions a l'hora de modular la localització de la indústria a Espanya. L'anàlisi dels resultats obtinguts mostra que tant la dotació de factors com els mecanismes de tipus NEG van ser elements determinants que expliquen la distribució geogràfica de la indústria des del segle XIX, tot i que la seva força relativa va anar variant amb el temps.
Resumo:
Durant el segle XIX, l'economia espanyola va transitar per les primeres etapes de la industrialització. Aquest procés es va donar en paral·lel a la integració del mercat domèstic de béns i factors, en un moment en què les reformes liberals i la construcció de la xarxa ferroviària, entre d'altres, van generar una important caiguda en els costos detransport. Al mateix temps que es donava aquesta progressiva integració del mercat domèstic espanyol, es van produir canvis significatius en la pauta de localització industrial. D'una banda, hi hagué un augment considerable de la concentració espacial de la indústria des de mitjans de segle XIX i fins a la Guerra Civil, i d¿altra, un increment de l'especialització regional. Ara bé, quines van ser les forces que van generar aquests canvis? Des d¿un punt de vista teòric, el model de Heckscher-Ohlin suggereix que la distribució a l'espai de l¿activitat econòmica ve determinada per l'avantatge comparativa dels territoris en funció de la dotació relativa de factors. Al seu torn, els models de Nova Geografia Econòmica (NEG) mostren l'existència d'una relació en forma de campana entre el procés d'integració econòmica i el grau de concentració geogràfica de l'activitat industrial. Aquest article examina empíricament els determinants de la localització industrial a Espanya entre 1856 i 1929, mitjançant l'estimació d¿un model que combina els elements de tipus Heckscher-Ohlin i els factors apuntats des de la NEG, amb l'objectiu de contrastar la força relativa dels arguments vinculats a aquestes dues interpretacions a l'hora de modular la localització de la indústria a Espanya. L'anàlisi dels resultats obtinguts mostra que tant la dotació de factors com els mecanismes de tipus NEG van ser elements determinants que expliquen la distribució geogràfica de la indústria des del segle XIX, tot i que la seva força relativa va anar variant amb el temps.
Resumo:
The aim of this article is to assess the effects of several territorial characteristics, specifically agglomeration economies, on industrial location processes in the Spanish region of Catalonia. Theoretically, the level of agglomeration causes economies which favour the location of new establishments, but an excessive level of agglomeration might cause diseconomies, since congestion effects arise. The empirical evidence on this matter is inconclusive, probably because the models used so far are not suitable enough. We use a more flexible semiparametric specification, which allows us to study the nonlinear relationship between the different types of agglomeration levels and location processes. Our main statistical source is the REIC (Catalan Manufacturing Establishments Register), which has plant-level microdata on location of new industrial establishments. Keywords: agglomeration economies, industrial location, Generalized Additive Models, nonparametric estimation, count data models.
Resumo:
This paper is about the role played by stock of human capital on location decisions of new manufacturing plants. We analyse the effect of several skill levels (from basic school to PhD) on decisions about the location of plants in various industries and, therefore, of different technological levels. We also test whether spatial aggregation level biases the results and determine the most appropriate areas to be considered in analyses of these phenomena. Our main statistical source is the Register of Manufacturing Establishments of Catalonia (REIC), which has plant-level microdata on the locations of new manufacturing plants. Keywords: agglomeration economies, industrial location, human capital, count-data models, spatial econometrics.
Resumo:
The objective of this paper is to analyze why firms in some industries locate in specialized economic environments (localization economies) while those in other industries prefer large city locations (urbanization economies). To this end, we examine the location decisions of new manufacturing firms in Spain at the city level and for narrowly defined industries (three-digit level). First, we estimate firm location models to obtain estimates that reflect the importance of localization and urbanization economies in each industry. In a second step, we regress these estimates on industry characteristics that are related to the potential importance of three agglomeration theories, namely, labor market pooling, input sharing and knowledge spillovers. Localization effects are low and urbanization effects are high in knowledge-intensive industries, suggesting that firms (partly) locate in large cities to reap the benefits of inter-industry knowledge spillovers. We also find that localization effects are high in industries that employ workers whose skills are more industry-specific, suggesting that industries (partly) locate in specialized economic environments to share a common pool of specialized workers.
Resumo:
This paper gives new evidence on the relationship between integration and industrial agglomeration in the presence of scale economies, by testing directly one of the predictions that can be derived from Krugman (1991), that is, the existence of regional nominal wage gradients and its transformation following changes in trade regimes. Our case study analyzes the effects of the substitution of an open economy by a closed economy regime, exactly the opposite process studied by Hanson (1996, 1997). In Spain, during the interwar period, protectionist policies would have favored the loss of centrality of the coastal location (Barcelona) and the relative rise of central locations (such as Madrid). Our results indicate the existence of a wage gradient centered in Barcelona during the interwar period (1914-1930) and its weakening after 1925.
Resumo:
En este artículo se analizan los determinantes de la localización de la actividad industrial en España durante la segunda mitad del siglo XIX. El objetivo es estudiar la existencia de cambios en los factores explicativos de la localización, con el fin de identificar los efectos de la integración económica sobre la geografía industrial española. Para hacerlo, en primer lugar se analiza la literatura histórica existente. En segundo lugar, se describen las teorías que explican la localización de l'actividad. En tercer lugar, se realiza un análisis empírico de la localización y la concentración de la industria española al siglo XIX. A continuación, se propone un estudio econométrico de los determinantes de la localización industrial en dos cortes temporales, 1856 y 1893. Los resultados son consistentes con las teorías del comercio. Durante el decurso de la segunda mitad del siglo XIX, España paso a ser una economía integrada, la movilidad del trabajo y del capital se vio favorecida y como resultado, las diferencias relativas en las dotaciones de factores perdieron importancia en la explicación de las pautas de especialización industrial. Por el contrario, la integración económica favoreció la significación relativa de las economías de escala o de la proximidad a los mercados como elementos explicativos de la localización de la industria, favoreciendo, de esta manera, la aglomeración de la actividad industrial
Resumo:
The objective of this paper is to explore the relative importance of each of Marshall's agglomeration mechanisms by examining the location of new manufacturing firms in Spain. In particular, we estimate the count of new firms by industry and location as a function of (pre-determined) local employment levels in industries that: 1) use similar workers (labor market pooling); 2) have a customer- supplier relationship (input sharing); and 3) use similar technologies (knowledge spillovers). We examine the variation in the creation of new firms across cities and across municipalities within large cities to shed light on the geographical scope of each of the three agglomeration mechanisms. We find evidence of all three agglomeration mechanisms, although their incidence differs depending on the geographical scale of the analysis.
Resumo:
This paper analyses empirically how differences in local taxes affect the intraregional location of new manufacturing plants. These effects are examined within the random profit maximization framework while accounting for the presence of different types of agglomeration economies (localization/ urbanization/ Jacobs¿ economies) at the municipal level. We look at the location decision of more than 10,000 establishments locating between 1996 and 2003 across more than 400 municipalities in Catalonia, a Spanish region. It is necessary to restrict the choice set to the local labor market and, above all, to control for agglomeration economies so as to identify the effects of taxes on the location of new establishments.