Justifying Institutional Investment in OER Development : OERs as Marketing Vehicle

The higher education sector has become increasingly competitive and prospective students are adopting a consumerist approach to institution and programme choice. In response, higher education marketing has become more complex, market-oriented and business-like. Financial sustainability of open education resource (OER) projects is a widespread concern. This paper explores the extent to which a classical product placement framework can be applied to OERs to justify institutional funding in OER projects as a marketing investment. It is argued that OERs designed on this premise can increase cognitive, affective and conative brand outcomes while providing the traditional educational and societal benefits associated with OERs. A series of propositions are presented that may form the basis of a future research agenda.

Simulating fuel consumption and vehicle emissions in an Australian context

Road transport is a major source of air pollution and greenhouse gas emissions around the world. There is an increasing interest in accurate information on local vehicle emission levels for policy development and sustainable traffic management. Previous studies have shown that emission predictions for the Australian situation need to reflect both the Australian fleet and driving behaviour to avoid unreliable outcomes. This paper discusses a new Australian vehicle emission software (PΔP) and a case-study where traffic simulation software (Aimsun) is combined with PΔP to demonstrate how consistent results can be achieved for the Australian situation. The case-study is an Australian city modelled using the microscopic simulator to generate the required trajectory data of each individual vehicle for the emission model. The simulation results are used in a number of ways: to assess the impacts of urban driving behaviour on fuel consumption, to create maps showing where and when elevated emission levels occur and to compare results with another program (COPERT Australia). The paper will also discuss where further research is required.

Productive efficiency and regulatory reform: The case of vehicle inspection services

Measuring productive efficiency provides information on the likely effects of regulatory reform. We present a Data Envelopment Analysis (DEA) of a sample of 38 vehicle inspection units under a concession regime, between the years 2000 and 2004. The differences in efficiency scores show the potential technical efficiency benefit of introducing some form of incentive regulation or of progressing towards liberalization. We also compute scale efficiency scores, showing that only units in territories with very low population density operate at a sub-optimal scale. Among those that operate at an optimal scale, there are significant differences in size; the largest ones operate in territories with the highest population density. This suggests that the introduction of new units in the most densely populated territories (a likely effect of some form of liberalization) would not be detrimental in terms of scale efficiency. We also find that inspection units belonging to a large, diversified firm show higher technical efficiency, reflecting economies of scale or scope at the firm level. Finally, we show that between 2002 and 2004, a period of high regulatory uncertainty in the sample’s region, technical change was almost zero. Regulatory reform should take due account of scale and diversification effects, while at the same time avoiding regulatory uncertainty.

Ampliació i millora d'un vehicle teledirigit

En el projecte Ampliació i millora d’un vehicle teledirigit s’ha dut a terme l’ampliació d’un prototip de vehicle ràdio controlat fent servir dues plaques Arduino Duemilanove. Una es situa en el comandament i l’altra en el vehicle i controlen el comportament dels dos dispositius. Es transmet la informació necessària entre elles a través de dos mòduls XBee que posteriorment se’ls hi incorpora. Les plaques fetes servir en el prototip inicial eren unes SARD-13192 de Freescale i el primer que es fa en aquest sentit és una revisió del codi font utilitzat i l’adaptació a les plaques Arduino. Un acceleròmetre ADXL335 que s’incorpora a una de les plaques permet que el prototip es pugui controlar segons la posició del comandament. A més, un cop finalitzat el nou prototip és capaç de desplaçar-se endavant i endarrere, girar aturat i en moviment, i a diferents velocitats que es representen en tot moment en uns LEDs. També guarda l’últim circuit efectuat que es pot reproduir a voluntat de l’usuari, i emmagatzema les dades del recorregut de tota una sessió per exportar a l’ordinador. Per últim s’han dut a terme les proves necessàries per constatar que totes les millores s’han implementat amb èxit.

Implementació de les físiques d'un vehicle en un videojoc 3D

En la carrera del mundo de los videojuegos por alcanzar insospechables cotas de realismo con las que seguir sorprendiendo y enganchando al público, los motores de física se han convertido en la herramienta de presente y futuro. Atraídos por el auge de esta nueva tecnología, hemos lidiado con los motores referencia hoy día en el mercado, seleccionando luego uno de ellos e implementando un humilde videojuego de carreras como muestra de su potencial y de los conocimientos adquiridos.

Vision-based localization of an underwater robot in a structured environment

This paper presents a vision-based localization approach for an underwater robot in a structured environment. The system is based on a coded pattern placed on the bottom of a water tank and an onboard down looking camera. Main features are, absolute and map-based localization, landmark detection and tracking, and real-time computation (12.5 Hz). The proposed system provides three-dimensional position and orientation of the vehicle along with its velocity. Accuracy of the drift-free estimates is very high, allowing them to be used as feedback measures of a velocity-based low-level controller. The paper details the localization algorithm, by showing some graphical results, and the accuracy of the system

Autonomous underwater vehicle control using reinforcement learning policy search methods

Autonomous underwater vehicles (AUV) represent a challenging control problem with complex, noisy, dynamics. Nowadays, not only the continuous scientific advances in underwater robotics but the increasing number of subsea missions and its complexity ask for an automatization of submarine processes. This paper proposes a high-level control system for solving the action selection problem of an autonomous robot. The system is characterized by the use of reinforcement learning direct policy search methods (RLDPS) for learning the internal state/action mapping of some behaviors. We demonstrate its feasibility with simulated experiments using the model of our underwater robot URIS in a target following task

Perspectives of auto-correcting lens distortions in mosaic-based underwater navigation

When unmanned underwater vehicles (UUVs) perform missions near the ocean floor, optical sensors can be used to improve local navigation. Video mosaics allow to efficiently process the images acquired by the vehicle, and also to obtain position estimates. We discuss in this paper the role of lens distortions in this context, proving that degenerate mosaics have their origin not only in the selected motion model or in registration errors, but also in the cumulative effect of radial distortion residuals. Additionally, we present results on the accuracy of different feature-based approaches for self-correction of lens distortions that may guide the choice of appropriate techniques for correcting distortions

Correction of shading effects in vision-based UUV localization

This paper describes the improvements achieved in our mosaicking system to assist unmanned underwater vehicle navigation. A major advance has been attained in the processing of images of the ocean floor when light absorption effects are evident. Due to the absorption of natural light, underwater vehicles often require artificial light sources attached to them to provide the adequate illumination for processing underwater images. Unfortunately, these flashlights tend to illuminate the scene in a nonuniform fashion. In this paper a technique to correct non-uniform lighting is proposed. The acquired frames are compensated through a point-by-point division of the image by an estimation of the illumination field. Then, the gray-levels of the obtained image remapped to enhance image contrast. Experiments with real images are presented

On the way to solve lighting problems in underwater imaging

A major obstacle to processing images of the ocean floor comes from the absorption and scattering effects of the light in the aquatic environment. Due to the absorption of the natural light, underwater vehicles often require artificial light sources attached to them to provide the adequate illumination. Unfortunately, these flashlights tend to illuminate the scene in a nonuniform fashion, and, as the vehicle moves, induce shadows in the scene. For this reason, the first step towards application of standard computer vision techniques to underwater imaging requires dealing first with these lighting problems. This paper analyses and compares existing methodologies to deal with low-contrast, nonuniform illumination in underwater image sequences. The reviewed techniques include: (i) study of the illumination-reflectance model, (ii) local histogram equalization, (iii) homomorphic filtering, and, (iv) subtraction of the illumination field. Several experiments on real data have been conducted to compare the different approaches

A review of sensor fusion techniques for underwater vehicle navigation

This work provides a general description of the multi sensor data fusion concept, along with a new classification of currently used sensor fusion techniques for unmanned underwater vehicles (UUV). Unlike previous proposals that focus the classification on the sensors involved in the fusion, we propose a synthetic approach that is focused on the techniques involved in the fusion and their applications in UUV navigation. We believe that our approach is better oriented towards the development of sensor fusion systems, since a sensor fusion architecture should be first of all focused on its goals and then on the fused sensors

The interactional space in CLIL (Content and Language Integrated Learning) and EFL (English as a Foreign Language) classrooms

Aquest estudi pretén investigar els intercanvis verbals mestre/a – aprenent(s) en dos contextos d'instrucció diferents: classes amb un enfocament AICLE (Aprenentatge Integrat de Continguts Curriculars i Llengua Estrangera) on s’aprenen continguts no lingüístics a través de l’anglès, per una banda, i classes 'tradicionals' d'anglès com a llengua estrangera, on l’anglès és alhora objecte d’estudi i vehicle de comunicació, per una altra banda. Més concretament, les preguntes que formula el/la mestre/a, la producció oral dels aprenents i el 'feedback' del/de la mestre/a en els episodis d’atenció a la forma s’han estudiat a la llum de les principals teories provinents del camp de l’Adquisició de Segones Llengües (SLA) per tal de demostrar el seu paper en l’aprenentatge de l’anglès. El corpus de dades prové de l’enregistrament de 7 sessions AICLE i d'11 sessions EFL enregistrades en format àudio i vídeo en dos centres públics d’Educació Primària (EP) de Catalunya. A cadascuna de les escoles, el/la mateix/a mestre/a és l’encarregat/da dels dos tipus d’instrucció amb el mateix grup d’aprenents (10-11 anys d’edat), fet que permet eliminar variables individuals com l'aptitud dels aprenents o l'estil del/de la mestre/a.Els resultats mostren un cert nombre de similituds discursives entre AICLE i EFL donat que ambdós enfocaments tenen lloc en el context-classe amb unes característiques ben definides. Tal com apunta la recerca realitzada en aquest camp, la instrucció AICLE reuneix un seguit de condicions idònies per un major desenvolupament dels nivells de llengua anglesa més enllà de les classes ‘tradicionals’ d’anglès. Malgrat això, aquest estudi sembla indicar que el potencial d'AICLE pel que fa a facilitar una exposició rica a l’anglès i una producció oral significativa no s’explota degudament. En aquest sentit, els resultats d’aquest estudi poden contribuir a la formació dels futurs professors d'AICLE si es busca l’assoliment d’una complementarietat d’ambdós contextos amb l’objectiu últim de millorar els nivells de domini de la llengua anglesa.

Monitoring switch-type sensors and powering autonomous sensors via inductive coupling: application to removable seats in vehicles

Aquesta tesi explora la possibilitat de fer servir enllaços inductius per a una aplicació de l’automòbil on el cablejat entre la centraleta (ECU) i els sensors o detectors és difícil o impossible. S’han proposat dos mètodes: 1) el monitoratge de sensors commutats (dos possibles estats) via acoblament inductiu i 2) la transmissió mitjançant el mateix principi físic de la potència necessària per alimentar els sensors autònoms remots. La detecció d'ocupació i del cinturó de seguretat per a seients desmuntables pot ser implementada amb sistemes sense fils passius basats en circuits ressonants de tipus LC on l'estat dels sensors determina el valor del condensador i, per tant, la freqüència de ressonància. Els canvis en la freqüència són detectats per una bobina situada en el terra del vehicle. S’ha conseguit provar el sistema en un marge entre 0.5 cm i 3 cm. Els experiments s’han dut a terme fent servir un analitzador d’impedàncies connectat a una bobina primària i sensors comercials connectats a un circuit remot. La segona proposta consisteix en transmetre remotament la potència des d’una bobina situada en el terra del vehicle cap a un dispositiu autònom situat en el seient. Aquest dispositiu monitorarà l'estat dels detectors (d'ocupació i de cinturó) i transmetrà les dades mitjançant un transceptor comercial de radiofreqüència o pel mateix enllaç inductiu. S’han avaluat les bobines necessàries per a una freqüència de treball inferior a 150 kHz i s’ha estudiat quin és el regulador de tensió més apropiat per tal d’aconseguir una eficiència global màxima. Quatre tipus de reguladors de tensió s’han analitzat i comparat des del punt de vista de l’eficiència de potència. Els reguladors de tensió de tipus lineal shunt proporcionen una eficiència de potència millor que les altres alternatives, els lineals sèrie i els commutats buck o boost. Les eficiències aconseguides han estat al voltant del 40%, 25% i 10% per les bobines a distàncies 1cm, 1.5cm, i 2cm. Les proves experimentals han mostrat que els sensors autònoms han estat correctament alimentats fins a distàncies de 2.5cm.

Underwater SLAM in a marina environment

This paper describes a navigation system for autonomous underwater vehicles (AUVs) in partially structured environments, such as dams, harbors, marinas or marine platforms. A mechanical scanning imaging sonar is used to obtain information about the location of planar structures present in such environments. A modified version of the Hough transform has been developed to extract line features, together with their uncertainty, from the continuous sonar dataflow. The information obtained is incorporated into a feature-based SLAM algorithm running an Extended Kalman Filter (EKF). Simultaneously, the AUV's position estimate is provided to the feature extraction algorithm to correct the distortions that the vehicle motion produces in the acoustic images. Experiments carried out in a marina located in the Costa Brava (Spain) with the Ictineu AUV show the viability of the proposed approach

Positioning an underwater vehicle through image mosaicking

Mosaics have been commonly used as visual maps for undersea exploration and navigation. The position and orientation of an underwater vehicle can be calculated by integrating the apparent motion of the images which form the mosaic. A feature-based mosaicking method is proposed in this paper. The creation of the mosaic is accomplished in four stages: feature selection and matching, detection of points describing the dominant motion, homography computation and mosaic construction. In this work we demonstrate that the use of color and textures as discriminative properties of the image can improve, to a large extent, the accuracy of the constructed mosaic. The system is able to provide 3D metric information concerning the vehicle motion using the knowledge of the intrinsic parameters of the camera while integrating the measurements of an ultrasonic sensor. The experimental results of real images have been tested on the GARBI underwater vehicle