The measurement of ice velocity, mass balance and thinning-rate on Johnsons Glacier, Livingston Island, South Shetland Islands, Antarctica

A network of twenty stakes was set up on Johnsons Glacier in order to determine its dynamics. During the austral summers from 1994-95 to 1997-98, we estimated surface velocities, mass balances and ice thickness variations. Horizontal velocity increased dow nstream from 1 m a- 1 near the ice divides to 40 m a- 1 near the ice terminus. The accumulation zone showed low accumulation rates (maximum of 0,6 m a- 1 (ice)), whereas in the lower part of the glacier, ablation rates were 4,3 m a- 1 (ice). Over the 3-year study period, both in the accumulation and ablation zones, we detected a reduction in the ice surface level ranging from 2 to 10 m from the annual ve rt ical velocities and ice-thinning data, the mass balance was obtained and compared with the mass balance field values, resulting in similar estimates. Flux values were calculated using cross-section data and horizontal velocities, and compared with the results obtained by means of mass balance and ice thinning data using the continuity equation. The two methods gave similar results.

La Industrialización en Cataluña: un balance historiográfico

Este trabajo constituye una breve presentación del caso de la industrialización de Cataluña en los siglos XIX y XX y, asimismo, una primera valoración crítica de las aportaciones de las dos últimas décadas al estudio histórico de la industria catalana, a partir de un anterior balance historiográfico realizado por el autor veinte años atrás. Esta revisión no se plantea desde una perspectiva pluridisciplinar, sino a partir de un enfoque especializado de Historia Económica. El hecho industrial ha mantenido una gran influencia durante los dos últimos siglos en todos esos ángulos de la vida social de Cataluña y en muchos más, desde el arte a la literatura o al deporte. La historia contemporánea catalana ha sido modelada en gran parte por la fuerte presencia de la industria. Pero en las secciones que siguen se ensaya, exclusivamente, una medida aproximada de la obra realizada, y de algunas tareas por hacer, con la caja de instrumentos propia de la ciencia económica desde una perspectiva histórica.

Information-sharing implications of horizontal mergers

We analyze the effects of uncertainty and private information on horizontal mergers. Firms face uncertain demands or costs and receive private signals. They may decide to merge sharing their private information. If the uncertainty parameters are independent and the signals are perfect, uncertainty generates an informational advantage only to the merging firms, increasing merger incentives and decreasing free-riding effects. Thus, mergers become more profitable and stable. These results generalize to the case of correlated parameters if the correlation is not very severe, and for perfect correlation if the firms receive noisy signals. From the normative point of view, mergers are socially less harmful compared to deterministic markets and may even be welfare enhancing. If the signals are, instead, publicly observed, uncertainty does not necessarily give more incentives to merge, and mergers are not always less socially harmful.

Classical horizontal inequity and reranking: an integrated approach

The last 20 years have seen a significant evolution in the literature on horizontal inequity (HI) and have generated two major and "rival" methodological strands, namely, classical HI and reranking. We propose in this paper a class of ethically flexible tools that integrate these two strands. This is achieved using a measure of inequality that merges the well-known Gini coefficient and Atkinson indices, and that allows a decomposition of the total redistributive effect of taxes and transfers in a vertical equity effect and a loss of redistribution due to either classical HI or reranking. An inequality-change approach and a money-metric cost-of-inequality approach are developed. The latter approach makes aggregate classical HI decomposable across groups. As in recent work, equals are identified through a nonparametric estimation of the joint density of gross and net incomes. An illustration using Canadian data from 1981 to 1994 shows a substantial, and increasing, robust erosion of redistribution attributable both to classical HI and to reranking, but does not reveal which of reranking or classical HI is more important since this requires a judgement that is fundamentally normative in nature.

Optimal exponent heat balance and refined integral methods applied to Stefan problems

When using a polynomial approximating function the most contentious aspect of the Heat Balance Integral Method is the choice of power of the highest order term. In this paper we employ a method recently developed for thermal problems, where the exponent is determined during the solution process, to analyse Stefan problems. This is achieved by minimising an error function. The solution requires no knowledge of an exact solution and generally produces significantly better results than all previous HBI models. The method is illustrated by first applying it to standard thermal problems. A Stefan problem with an analytical solution is then discussed and results compared to the approximate solution. An ablation problem is also analysed and results compared against a numerical solution. In both examples the agreement is excellent. A Stefan problem where the boundary temperature increases exponentially is analysed. This highlights the difficulties that can be encountered with a time dependent boundary condition. Finally, melting with a time-dependent flux is briefly analysed without applying analytical or numerical results to assess the accuracy.

Application of standard and refined heat balance integral methods to one-dimensional Stefan problems

The work in this paper concerns the study of conventional and refined heat balance integral methods for a number of phase change problems. These include standard test problems, both with one and two phase changes, which have exact solutions to enable us to test the accuracy of the approximate solutions. We also consider situations where no analytical solution is available and compare these to numerical solutions. It is popular to use a quadratic profile as an approximation of the temperature, but we show that a cubic profile, seldom considered in the literature, is far more accurate in most circumstances. In addition, the refined integral method can give greater improvement still and we develop a variation on this method which turns out to be optimal in some cases. We assess which integral method is better for various problems, showing that it is largely dependent on the specified boundary conditions.

Plataforma cerámica para la accesibilidad horizontal

Desenvolupament d'innovacions en elements vinculats amb l'accessibilitat física, en concret de sistemes de paviments. Es tracta de sistemes de paviments que permetin el desplaçament segur i accessible en el patrimoni arquitectònic, on és habitual que les irregularitats del sòl impedeixin la mobilitat de persones amb discapacitat.

Fiscal policy, foresight and the trade balance in the U.S.

This paper investigates the effects of fiscal policy on the trade balance using a structural factor model. A fiscal policy shock worsens the trade balance and produces an appreciation of the domestic currency but the effects are quantitatively small. The findings match the theoretical predictions of the standard Mundell-Fleming model, although fiscal policy should not be considered one of the main causes of the large US external deficit. My conclusions differ from those reached using VAR models since the fiscal shock, possibly due to fiscal foresight, is nonfundamental for the variables typically used in open economy VARs.

Improving the accuracy of heat balance integral methods applied to thermal problems with time dependent boundary conditions

In this paper the two main drawbacks of the heat balance integral methods are examined. Firstly we investigate the choice of approximating function. For a standard polynomial form it is shown that combining the Heat Balance and Refined Integral methods to determine the power of the highest order term will either lead to the same, or more often, greatly improved accuracy on standard methods. Secondly we examine thermal problems with a time-dependent boundary condition. In doing so we develop a logarithmic approximating function. This new function allows us to model moving peaks in the temperature profile, a feature that previous heat balance methods cannot capture. If the boundary temperature varies so that at some time t & 0 it equals the far-field temperature, then standard methods predict that the temperature is everywhere at this constant value. The new method predicts the correct behaviour. It is also shown that this function provides even more accurate results, when coupled with the new CIM, than the polynomial profile. Analysis primarily focuses on a specified constant boundary temperature and is then extended to constant flux, Newton cooling and time dependent boundary conditions.

Institutional Balance in the EU. The Prodi Administration as a Reforming Commission

The essay looks at the Prodi Commission (1999-2004) in the context of the institutional balance in the European Union. Not only did Prodi come into office at a time of unprecedented weakness of the Executive, but the Commission operates within a changing institutional equilibrium, one made more precarious by the shifting political disposition of the Member States

Efectos en el balance de ácidos grasos y el metabolismo lipídico

En edades prematuras el cerdo tiene unos niveles de engrasamiento muy bajos y durante su crecimiento aumenta su contenido en proteína, hueso y masa grasa. Mientras que la deposición proteica viene determinada en gran medida por la capacidad genética, la deposición grasa depende de la ingesta energética.

Construcción de un modelo Multi- Regional Input-Output (MRIO) medioambiental para Cataluña y el resto de España: Estudio del balance en CO2 incorporado en el comercio

El objetivo de este estudio es analizar el impacto, en emisiones de CO2, de la demanda final de Cataluña en relación a los vínculos comerciales interregionales con el resto de España y el resto del mundo. Este proceso implica el análisis del balance en CO2 incorporado para Cataluña, lo que permitirá evaluar la responsabilidad de la economía catalana respecto a estas emisiones. Para este propósito se construye, para esta determinada desagregación regional, un modelo Multi-Regional Input-Output (MRIO) extendido al medioambiente con sectores verticalmente integrados. La incorporación de la técnica de la integración vertical nos permite un enfoque alternativo para el Balance Neto y un análisis más detallado de los vínculos interregionales entre los diversos sectores productivos, centrado en la responsabilidad última de la demanda final de cada sector en cada región. Hasta el momento, los estudios previos sobre los impactos medioambientales incorporados al comercio español se han centrado principalmente en el ámbito nacional. No obstante, por un lado el comercio interregional con el resto de España en términos monetarios representa cerca de la mitad del comercio exterior catalán. Por otro lado, los distintos metabolismos energéticos de ambas economías tienen como consecuencia una importante diferencia en la intensidad de emisión en la producción de bienes y servicios. Esta situación genera para Cataluña un déficit en el Balance Neto estimado con el resto de España, aún teniendo un importante superávit monetario. De esto se desprende la importancia de integrar el nivel interregional en los estudios de los impactos medioambientales incorporados en el comercio y, en consecuencia, en la planificación y formalización de políticas económicas y ambientales a nivel nacional.