Effect of heating oxyhemoglobin and methemoglobin on microsomes oxidation.

Hemoglobin (Hb) has been proposed to be a major pro-oxidant in raw and cooked meats. To understand the mechanisms and differentiate between the pro-oxidant and antioxidant potential of oxyhemoglobin (OxyHb) and methemoglobin (MetHb), their pro-oxidant activity, protein solubility, radical scavenging capacity, iron content and contribution of non-chelatable iron on lipid oxidation were determined as a function of thermal treatments. The ability of native OxyHb and MetHb to promote lipid oxidation was similar and higher than their corresponding OxyHb or MetHb heated at 68 and 90 degrees C but not different from those at 45 degrees C. The pro-oxidant activity of MetHb heated at 68 and 90 degrees C were similar whereas the pro-oxidant activity of OxyHb heated at 68 degrees C was higher than that heated at 90 degrees C. The decreased pro-oxidant activity of heat-denatured Hb was associated with a decrease in the solubility of heme iron while free iron showed little impact on the lipid oxidation.

Cooling and heating by adiabatic magnetization in Ni50Mn34In16 magnetic shape-memory alloy

We report on measurements of the adiabatic temperature change in the inverse magnetocaloric Ni50Mn34In16 alloy. It is shown that this alloy heats up with the application of a magnetic field around the Curie point due to the conventional magnetocaloric effect. In contrast, the inverse magnetocaloric effect associated with the martensitic transition results in the unusual decrease of temperature by adiabatic magnetization. We also provide magnetization and specific heat data which enable to compare the measured temperature changes to the values indirectly computed from thermodynamic relationships. Good agreement is obtained for the conventional effect at the second-order paramagnetic-ferromagnetic phase transition. However, at the first-order structural transition the measured values at high fields are lower than the computed ones. Irreversible thermodynamics arguments are given to show that such a discrepancy is due to the irreversibility of the first-order martensitic transition.

Anomalous crystallization of hydrogenated amorphous silicon during fast heating ramps

Thermal crystallization experiments carried out using calorimetry on several a-Si:H materials with different microstructures are reported. The samples were crystallized during heating ramps at constant heating rates up to 100 K/min. Under these conditions, crystallization takes place above 700 C and progressively deviates from the standard kinetics. In particular, two crystallization processes were detected in conventional a-Si:H, which reveal an enhancement of the crystallization rate. At100 K/min, such enhancement is consistent with a diminution of the crystallization time by a factor of 7. In contrast, no systematic variation of the resulting grain size was observed. Similar behavior was also detected in polymorphous silicon and silicon nanoparticles, thus showing that it is characteristic of a variety of hydrogenated amorphous silicon materials.

Influence of ohmic heating on the flow field in thin-layer electrodeposition

In thin-layer electrodeposition the dissipated electrical energy leads to a substantial heating of the ion solution. We measured the resulting temperature field by means of an infrared camera. The properties of the temperature field correspond closely with the development of the concentration field. In particular, we find that the thermal gradients at the electrodes act similar to a weak additional driving force to the convection rolls driven by concentration gradients.

Dewaterability of sewage sludge by ultrasonic, thermal and chemical treatments

Sludges resulting from wastewater treatment processes have a characteristically high water content, which complicates handling operations such as pumping, transport and disposal. To enhance the dewatering of secondary sludge, the effect of ultrasound waves, thermal treatment and chemical conditioning with NaOH have been studied. Two features of treated sludges were examined: their rheological behavior and their dewaterability. The rheological tests consisted of recording shear stress when the shear rate increases and decreases continuously and linearly with time, and when it increases and decreases in steps. Steady-state viscosity and thixotropy were obtained from the rheological tests, and both decreased significantly in all cases with increased treatment intensity. Centrifugation of ultrasonicated and thermally treated sludges allowed the total solid content to be increased by approximately 16.2% and 17.6%, respectively. These dewatered sludges had a lower viscosity and thixotropy than the untreated sludge. In contrast, alkali conditioning barely allowed the sludge to be dewatered by centrifugation, despite decreasing its viscosity and thixotropy.

Anomalous crystallization of hydrogenated amorphous silicon during fast heating ramps

Thermal crystallization experiments carried out using calorimetry on several a-Si:H materials with different microstructures are reported. The samples were crystallized during heating ramps at constant heating rates up to 100 K/min. Under these conditions, crystallization takes place above 700 C and progressively deviates from the standard kinetics. In particular, two crystallization processes were detected in conventional a-Si:H, which reveal an enhancement of the crystallization rate. At100 K/min, such enhancement is consistent with a diminution of the crystallization time by a factor of 7. In contrast, no systematic variation of the resulting grain size was observed. Similar behavior was also detected in polymorphous silicon and silicon nanoparticles, thus showing that it is characteristic of a variety of hydrogenated amorphous silicon materials

Solid phase crystallization under continuous heating: kinetic and microstructure scaling laws

The kinetics and microstructure of solid-phase crystallization under continuous heating conditions and random distribution of nuclei are analyzed. An Arrhenius temperature dependence is assumed for both nucleation and growth rates. Under these circumstances, the system has a scaling law such that the behavior of the scaled system is independent of the heating rate. Hence, the kinetics and microstructure obtained at different heating rates differ only in time and length scaling factors. Concerning the kinetics, it is shown that the extended volume evolves with time according to αex = [exp(κCt′)]m+1, where t′ is the dimensionless time. This scaled solution not only represents a significant simplification of the system description, it also provides new tools for its analysis. For instance, it has been possible to find an analytical dependence of the final average grain size on kinetic parameters. Concerning the microstructure, the existence of a length scaling factor has allowed the grain-size distribution to be numerically calculated as a function of the kinetic parameters

Active packaging containing nisin and high pressure processing as post-processing listericidal treatments for convenience fermented sausages

Listeria monocytogenes was inoculated on the surface of sliced fermented sausages with no added sodium salt. The pathogen was progressively inactivated during the product shelf life (90 days). Antimicrobial packaging of fermented sausages with PVOH films containing nisin induced a more pronounced reduction of L. monocytogenes counts during refrigerated storage. HPP alone (600 MPa, 5 min, 12 °C) had no antimicrobial effect against L. monocytogenes at the studied conditions. Combination of HPP with antimicrobial packaging did not produce any extra protection against L. monocytogenes compared to antimicrobial packaging alone. The lack of effect of HPP on L. monocytogenes was attributed to a protective effect exerted by the low water activity of the product and its lactate content. These results reflect that antimicrobial packaging with the inclusion of nisin as a natural antimicrobial could be considered as an effective method to reduce the levels of L. monocytogenes in sliced fermented sausages with no added sodium salt

Avaluació de la futura gestió i utilització de la biomassa forestal mitjançant un district heating a Bellver de Cerdanya

En aquest article es pretén explicar breument la viabilitat de la futura gestió i utilització de la biomassa forestal de Bellver de Cerdanya mitjançant un district heating al futur barri del Pla de Tomet. Les particularitats per les quals aquest poble és ideal per a aquest projecte són que l'ajuntament és propietari de gairebé un 90% dels boscos situats en aquest municipi; i que alhora ja ha realitzat diverses instal·lacions que utilitzen la biomassa forestal per a calefacció i ACS. La situació econòmica de la comarca és bastant complicada, ja que s'ha basat en el sector turístic i la construcció, però ambdós no passen pel millor moment. El projecte serviria per donar un valor a la biomassa forestal que fins ara no s'ha donat, i alhora s'intenta buscar nous inputs econòmics per a la Cerdanya. En aquest treball també s'analitza quins haurien de ser els futurs tractaments que s'haurien d'aplicar a la forest, tenint en compte les activitats que es realitzen actualment, i evitant en tot moment possibles efectes negatius, com podria ser la sobreexplotació. També es dedica una part del projecte a explicar els sistemes per obtenir i gestionar de forma correcta la biomassa. A continuació es tracta la part més tècnica, realitzant una estimació del possible futur consum energètic del barri del Pla de Tomet, encara no construït; i decidint quins sistema de calderes seria el més adequat, el tipus d’emmagatzematge més apropiat i els passos a seguir per millorar el rendiment del procés de la gestió i extracció de la biomassa. Seguint tots aquests passos s'arriba a la conclusió que aprofitar la biomassa forestal és millor solució que utilitzar combustibles fòssils. A part dels obvis beneficis medi ambientals, també és millor a nivell econòmic, tant pels futurs veïns com per l'ajuntament.

Contribution of early detection and adjuvant treatments to breast cancer mortality reduction in Catalonia, Spain

Background: Reductions in breast cancer (BC) mortality in Western countries have been attributed to the use of screening mammography and adjuvant treatments. The goal of this work was to analyze the contributions of both interventions to the decrease in BC mortality between 1975 and 2008 in Catalonia. Methodology/Principal Findings: A stochastic model was used to quantify the contribution of each intervention. Age standardized BC mortality rates for calendar years 1975-2008 were estimated in four hypothetical scenarios: 1) Only screening, 2) Only adjuvant treatment, 3) Both interventions, and 4) No intervention. For the 30-69 age group, observed Catalan BC mortality rates per 100,000 women-year rose from 29.4 in 1975 to 38.3 in 1993, and afterwards continuously decreased to 23.2 in 2008. If neither of the two interventions had been used, in 2008 the estimated BC mortality would have been 43.5, which, compared to the observed BC mortality rate, indicates a 46.7% reduction. In 2008 the reduction attributable to screening was 20.4%, to adjuvant treatments was 15.8% and to both interventions 34.1%. Conclusions/Significance: Screening and adjuvant treatments similarly contributed to reducing BC mortality in Catalonia. Mathematical models have been useful to assess the impact of interventions addressed to reduce BC mortality that occurred over nearly the same periods.

No Major Differences Found between the Effects of Microwave-Based and Conventional Heat Treatment Methods on Two Different Liquid Foods

Extension of shelf life and preservation of products are both very important for the food industry. However, just as with other processes, speed and higher manufacturing performance are also beneficial. Although microwave heating is utilized in a number of industrial processes, there are many unanswered questions about its effects on foods. Here we analyze whether the effects of microwave heating with continuous flow are equivalent to those of traditional heat transfer methods. In our study, the effects of heating of liquid foods by conventional and continuous flow microwave heating were studied. Among other properties, we compared the stability of the liquid foods between the two heat treatments. Our goal was to determine whether the continuous flow microwave heating and the conventional heating methods have the same effects on the liquid foods, and, therefore, whether microwave heat treatment can effectively replace conventional heat treatments. We have compared the colour, separation phenomena of the samples treated by different methods. For milk, we also monitored the total viable cell count, for orange juice, vitamin C contents in addition to the taste of the product by sensory analysis. The majority of the results indicate that the circulating coil microwave method used here is equivalent to the conventional heating method based on thermal conduction and convection. However, some results in the analysis of the milk samples show clear differences between heat transfer methods. According to our results, the colour parameters (lightness, red-green and blue-yellow values) of the microwave treated samples differed not only from the untreated control, but also from the traditional heat treated samples. The differences are visually undetectable, however, they become evident through analytical measurement with spectrophotometer. This finding suggests that besides thermal effects, microwave-based food treatment can alter product properties in other ways as well.