Development of an optimized methodology for tensile testing of carbon steels in hydrogen environment

The study was performed at OCAS, the Steel Research Centre of ArcelorMittal for the Industry market. The major aim of this research was to obtain an optimized tensile testing methodology with in-situ H-charging to reveal the hydrogen embrittlement in various high strength steels. The second aim of this study has been the mechanical characterization of the hydrogen effect on hight strength carbon steels with varying microstructure, i.e. ferrite-martensite and ferrite-bainite grades. The optimal parameters for H-charging - which influence the tensile test results (sample geometry type of electrolyte, charging methods effect of steel type, etc.) - were defined and applied to Slow Strain Rate testing, Incremental Step Loading and Constant Load Testing. To better understand the initiation and propagation of cracks during tensile testing with in-situ H-charging, and to make the correlation with crystallographic orientation, some materials have been analyzed in the SEM in combination with the EBSD technique. The introduction of a notch on the tensile samples permits to reach a significantly improved reproducibility of the results. Comparing the various steel grades reveals that Dual Phase (ferrite-martensite) steels are more sensitive to hydrogen induced cracking than the FB (ferritic-bainitic) ones. This higher sensitivity to hydrogen was found back in the reduced failure times, increased creep rates and enhanced crack initiation (SEM) for the Dual Phase steels in comparison with the FB steels.

Estudi del procés de tall per a la millora dels esbocats en materials AHSS

En aquest projecte es presenta un estudi sobre punxonats i esbocats per a materials d’Alt límit elàstic (Acers AHSS; Advanced High Strength Steels), amb l’objectiu d’aconseguir saber quin és el millor procés de tall per aconseguir esbocats correctes. Utilitzant la premsa hidràulica de la Fundació Centre Tecnològic de Manresa (CTM) es realitza el punxonat i els esbocats a tots els materials per tal d’avaluar el seu comportament alhora de ser esbocats. A partir d’aquests resultats obtindrem les gràfiques de ràtio d’esbocat per a cadascun dels materials en els diferents sentits de esbocat. Com a mètode alternatiu del procés de tall, es realitzen unes mostres amb tall per aigua. S’observarà si els esbocats trenquen o no trenquen i en quines condicions ho fan. Una vegada realitzats aquests assajos, es procedirà a realitzar l’estudi de microdureses amb un indentador Vickers per tal de comprovar l’afectació de l’operació de tall en la microestructura del material. Es realitzarà també algun perfil de dureses utilitzant el Nanoindentador. Per finalitzar el projecte, s’inclourà un apartat de conclusions i un estudi mediambiental produït com a conseqüència de l’elaboració del projecte, així com un pressupost total d’aquest.

Perpendicular magnetic anisotropy in chemically disordered FePd-FeV(100) alloy thin films

We find that the use of V(100) buffer layers on MgO(001) substrates for the epitaxy of FePd binary alloys yields to the formation at intermediate and high deposition temperatures of a FePd¿FeV mixed phase due to strong V diffusion accompanied by a loss of layer continuity and strong increase of its mosaic spread. Contrary to what is usually found in this kind of systems, these mixed phase structures exhibit perpendicular magnetic anisotropy (PMA) which is not correlated with the presence of chemical order, almost totally absent in all the fabricated structures, even at deposition temperatures where it is usually obtained with other buffer layers. Thus the observed PMA can be ascribed to the V interdiffusion and the formation of a FeV alloy, being the global sample saturation magnetization also reduced.

Cooling and heating by adiabatic magnetization in Ni50Mn34In16 magnetic shape-memory alloy

We report on measurements of the adiabatic temperature change in the inverse magnetocaloric Ni50Mn34In16 alloy. It is shown that this alloy heats up with the application of a magnetic field around the Curie point due to the conventional magnetocaloric effect. In contrast, the inverse magnetocaloric effect associated with the martensitic transition results in the unusual decrease of temperature by adiabatic magnetization. We also provide magnetization and specific heat data which enable to compare the measured temperature changes to the values indirectly computed from thermodynamic relationships. Good agreement is obtained for the conventional effect at the second-order paramagnetic-ferromagnetic phase transition. However, at the first-order structural transition the measured values at high fields are lower than the computed ones. Irreversible thermodynamics arguments are given to show that such a discrepancy is due to the irreversibility of the first-order martensitic transition.