Ra isotopes and Rn as a tool for the water management resources: the Alberquillas aquifer (Málaga-Granada)

The aim of this project is to evaluate the importance of submarine groundwater discharge sector in order to improve the water balance in Málaga-Granada region. The approach of this study arose from the the geology and the aquifers that indicate that there could be some discharge to the sea between Maro (Málaga) and Almuñécar (Granada) and the Andalusian’s Government and its Water Agence were really interested in evaluating it because there is a lot of population and few water available and the magnitude of groundwater discharge has generated controversy. Is well known that water is a scarce resource in this area and it’s very important for the society and for the environment. The legislation, the water policies, the knowledge of the aquifer and the geology, the water dynamics, the land use and the water perception in the society might help the management of this resource not just in Andalusia but in all the Mediterranean basin. The main objective is to evaluate the submarine groundwater discharge from the Alberquillas Aqufier to the sea by measuring 222Rn and Ra isotopes. Specific objectives have been established to achieve the main objective: A) Reveal the importance of water resources in the Mediterranean basin; B) Learn radiometric techniques for the study of groundwater discharge to the sea; C) Learn of sampling techniques of water samples for the measurement of Ra and Rn; D) Learn the techniques for measuring Ra (RaDeCC) and Rn (RAD7); E) Interpretation and discussion of results. During this semester, and in addition of the present study in Málaga- Granada region, the author has participated in the initial phase (sampling, analysis and interpretation of preliminary results) of other research projects focused on the study of submarine groundwater discharges through the use of Ra isotopes and 222Rn. These studies have been developed in different areas, including Alt Empordà (Roses and Sant Pere Pescador), Maresme with CMIMA’s group (Mediterranean Center for Marine and Environmental Research), Delta de l’Ebre, Peñíscola and Mallorca with the IMEDEA’s group (Mediterranean Institute for Advanced Studies).

Ellipsometric study of a-Si:H thin films deposited by square wave modulated rf glow discharge

Thin films of hydrogenated amorphous silicon (a‐Si:H), deposited by square wave modulated (SQWM) rf silane discharges, have been studied through spectroscopic and real time phase modulated ellipsometry. The SQMW films obtained at low mean rf power density (19 mW/cm2) have shown smaller surface roughness than those obtained in standard continuous wave (cw) rf discharges. At higher rf powers (≥56 mW/cm2), different behaviors depending on the modulating frequency have been observed. On the one hand, at low modulating frequencies (<40 Hz), the SQWM films have shown a significant increase of porosity and surface roughness as compared to cw samples. On the other, at higher modulating frequencies, the material density and roughness have been found to be similar in SQWM and cw films. Furthermore, the deposition rate of the films show more pronounced increases with the modulating frequency as the rf power is increased. Experimental results are discussed in terms of plasma negative charged species which can be relatively abundant in high rf power discharges and cause significant effects on the deposited layers through polymers, clusters, and powder formation.

Effect of the nanoparticles on the structure and crystallization of amorphous silicon thin films produced by rf glow discharge

Thin films of nanostructured silicon (ns-Si:H) were deposited by plasma-enhanced chemical vapor deposition in the presence of silicon nanoparticles at 100 C substrate temperature using silane and hydrogen gas mixture under continuous wave (cw) plasma conditions. The nanostructure of the films has been demonstrated by diverse ways: transmission electron microscopy, Raman spectroscopy and x-ray diffraction, which have shown the presence of ordered silicon clusters (1!=2 nm) embedded in an amorphous silicon matrix. Due to the presence of these ordered domains, the films crystallize faster than standard hydrogenated amorphous silicon samples, as evidenced by electrical measurements during the thermal annealing.

Bioelectrochemical Treatment of Contaminated Groundwater

To remove these pollutants from groundwater, different technologies can be used. Currently, the Environmental Protection Agency (EPA) considers ion exchange, reverse osmosis and reverse electrodialysis to be effective methods for the decrease of their concentrations, below their limit in drinking water. These technologies have some drawbacks, such as low selectivity towards the target pollutant, high energy or chemicals requirements, and the generation of waste brine (pollutants are separated from water, not treated), which require an additional treatment. Bio Electro Chemical Systems (BES) could fill this niche

Morphological and Magnetic Properties of Superparamagnetic Carbon-Coated Fe Nanoparticles Produced by Arc Discharge.

Spherical carbon coated iron particles of nanometric diameter in the 510 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 58·10 4 Pa of He). The particles exhibit a crystalline dense iron core with an average diameter 7.4 ± 2.0 nm surrounded by a sealed carbon shell, shown by transmission electron microscopy (TEM), selected-area diffrac- tion (SAED), energy-dispersive X-ray analysis (STEM-EDX) and electron energy loss spectroscopy (EELS). The SAED, EDX and EELS results indicate a lack of traces of core oxidized phases showing an efficient protection role of the carbon shell. The magnetic properties of the nanoparticles have been investigated in the 5300 K temperature range using a superconducting quantum interference device (SQUID). The results reveal a superparamagnetic behaviour with an average monodomain diameter of 7.6 nm of the nanoparticles. The zero field cooled and field cooled (ZFC-FC)magnetization curves show a blocking temperature (TB)at room temperature very suitable for biomedical applications (drug delivery, magnetic resonance imaging MRI, hyperthermia).

Standardizing admission and discharge processes to improve patient flow: A cross sectional study

Background: The aim of this study was to evaluate how hospital capacity was managed focusing on standardizing the admission and discharge processes. Methods: This study was set in a 900-bed university affiliated hospital of the National Health Service, near Barcelona (Spain). This is a cross-sectional study of a set of interventions which were gradually implemented between April and December 2008. Mainly, they were focused on standardizing the admission and discharge processes to improve patient flow. Primary administrative data was obtained from the 2007 and 2009 Hospital Database. Main outcome measures were median length of stay, percentage of planned discharges, number of surgery cancellations and median number of delayed emergency admissions at 8:00 am. For statistical bivariate analysis, we used a Chi-squared for linear trend for qualitative variables and a Wilcoxon signed ranks test and a Mann–Whitney test for non-normal continuous variables. Results: The median patients’ global length of stay was 8.56 days in 2007 and 7.93 days in 2009 (p<0.051). The percentage of patients admitted the same day as surgery increased from 64.87% in 2007 to 86.01% in 2009 (p<0.05). The number of cancelled interventions due to lack of beds was 216 patients in 2007 and 42 patients in 2009. The median number of planned discharges went from 43.05% in 2007 to 86.01% in 2009 (p<0.01). The median number of emergency patients waiting for an in-hospital bed at 8:00 am was 5 patients in 2007 and 3 patients in 2009 (p<0.01). Conclusions: In conclusion, standardization of admission and discharge processes are largely in our control. There is a significant opportunity to create important benefits for increasing bed capacity and hospital throughput.

Standardizing admission and discharge processes to improve patient flow: A cross sectional study

Background: The aim of this study was to evaluate how hospital capacity was managed focusing on standardizing the admission and discharge processes. Methods: This study was set in a 900-bed university affiliated hospital of the National Health Service, near Barcelona (Spain). This is a cross-sectional study of a set of interventions which were gradually implemented between April and December 2008. Mainly, they were focused on standardizing the admission and discharge processes to improve patient flow. Primary administrative data was obtained from the 2007 and 2009 Hospital Database. Main outcome measures were median length of stay, percentage of planned discharges, number of surgery cancellations and median number of delayed emergency admissions at 8:00¿am. For statistical bivariate analysis, we used a Chi-squared for linear trend for qualitative variables and a Wilcoxon signed ranks test and a Mann¿Whitney test for non-normal continuous variables. Results:The median patients' global length of stay was 8.56 days in 2007 and 7.93 days in 2009 (p<0.051). The percentage of patients admitted the same day as surgery increased from 64.87% in 2007 to 86.01% in 2009 (p<0.05). The number of cancelled interventions due to lack of beds was 216 patients in 2007 and 42 patients in 2009. The median number of planned discharges went from 43.05% in 2007 to 86.01% in 2009 (p<0.01). The median number of emergency patients waiting for an in-hospital bed at 8:00¿am was 5 patients in 2007 and 3 patients in 2009 (p<0.01). Conclusions: In conclusion, standardization of admission and discharge processes are largely in our control. There is a significant opportunity to create important benefits for increasing bed capacity and hospital throughput.

Cross-validation of methods used for analysis of MTBE and other gasoline components in groundwater.

Head space gas chromatography with flame-ionization detection (HS-GC-FID), ancl purge and trap gas chromatography-mass spectrometry (P&T-GC-MS) have been used to determine methyl-tert-butyl ether (MTBE) and benzene, toluene, and the ylenes (BTEX) in groundwater. In the work discussed in this paper measures of quality, e.g. recovery (94-111%), precision (4.6 - 12.2%), limits of detection (0.3 - 5.7 I~g L 1 for HS and 0.001 I~g L 1 for PT), and robust-ness, for both methods were compared. In addition, for purposes of comparison, groundwater samples from areas suffering from odor problems because of fuel spillage and tank leakage were analyzed by use of both techniques. For high concentration levels there was good correlation between results from both methods.

Cross-validation of methods used for analysis of MTBE and other gasoline components in groundwater.

Head space gas chromatography with flame-ionization detection (HS-GC-FID), ancl purge and trap gas chromatography-mass spectrometry (P&T-GC-MS) have been used to determine methyl-tert-butyl ether (MTBE) and benzene, toluene, and the ylenes (BTEX) in groundwater. In the work discussed in this paper measures of quality, e.g. recovery (94-111%), precision (4.6 - 12.2%), limits of detection (0.3 - 5.7 I~g L 1 for HS and 0.001 I~g L 1 for PT), and robust-ness, for both methods were compared. In addition, for purposes of comparison, groundwater samples from areas suffering from odor problems because of fuel spillage and tank leakage were analyzed by use of both techniques. For high concentration levels there was good correlation between results from both methods.

A prospective cohort study of healthcare visits and rehospitalizations after hospital discharge in community-acquired pneumonia

Background and objective: We aimed to identify the frequency of, reasons for and risk factors associated with additional healthcare visits and rehospitalizations (healthcare interactions) by patients with community-acquired pneumonia (CAP) within 30 days of hospital discharge. Methods: Observational analysis of a prospective cohort of adults hospitalized with CAP at a tertiary hospital (2007-2009). Additional healthcare interactions were defined as the visits to a primary care centre or emergency department and hospital readmissions within 30 days of discharge. Results: Of the 934 hospitalized patients with CAP, 282 (34.1%) had additional healthcare interactions within 30 days of hospital discharge: 149 (52.8%) needed an additional visit to their primary care centre and 177 (62.8%) attended the emergency department. Seventy-two (25.5%) patients were readmitted to hospital. The main reasons for additional healthcare interactions were worsening of signs or symptoms of CAP and new or worsening comorbid conditions independent of pneumonia, mainly cardiovascular and pulmonary diseases. The only independent factor associated with visits to primary care centre or emergency department was alcohol abuse (odds ratio [OR] = 1.65; 95% confidence interval [CI]: 1.03-2.64). Prior hospitalization (≤ 90 days) (OR = 2.47; 95% CI: 1.11-5.52) and comorbidities (OR = 3.99; 95% CI: 1.12-14.23) were independently associated with rehospitalization. Conclusions: Additional healthcare visits and rehospitalizations within 30 days of hospital discharge are common in patients with CAP. This is mainly due to a worsening of signs or symptoms of CAP and/or comorbid conditions. These findings may have implications for discharge planning and follow-up of patients with CAP.

A prospective cohort study of healthcare visits and rehospitalizations after hospital discharge in community-acquired pneumonia

Background and objective: We aimed to identify the frequency of, reasons for and risk factors associated with additional healthcare visits and rehospitalizations (healthcare interactions) by patients with community-acquired pneumonia (CAP) within 30 days of hospital discharge. Methods: Observational analysis of a prospective cohort of adults hospitalized with CAP at a tertiary hospital (2007-2009). Additional healthcare interactions were defined as the visits to a primary care centre or emergency department and hospital readmissions within 30 days of discharge. Results: Of the 934 hospitalized patients with CAP, 282 (34.1%) had additional healthcare interactions within 30 days of hospital discharge: 149 (52.8%) needed an additional visit to their primary care centre and 177 (62.8%) attended the emergency department. Seventy-two (25.5%) patients were readmitted to hospital. The main reasons for additional healthcare interactions were worsening of signs or symptoms of CAP and new or worsening comorbid conditions independent of pneumonia, mainly cardiovascular and pulmonary diseases. The only independent factor associated with visits to primary care centre or emergency department was alcohol abuse (odds ratio [OR] = 1.65; 95% confidence interval [CI]: 1.03-2.64). Prior hospitalization (≤ 90 days) (OR = 2.47; 95% CI: 1.11-5.52) and comorbidities (OR = 3.99; 95% CI: 1.12-14.23) were independently associated with rehospitalization. Conclusions: Additional healthcare visits and rehospitalizations within 30 days of hospital discharge are common in patients with CAP. This is mainly due to a worsening of signs or symptoms of CAP and/or comorbid conditions. These findings may have implications for discharge planning and follow-up of patients with CAP.

A prospective cohort study of healthcare visits and rehospitalizations after hospital discharge in community-acquired pneumonia

Background and objective: We aimed to identify the frequency of, reasons for and risk factors associated with additional healthcare visits and rehospitalizations (healthcare interactions) by patients with community-acquired pneumonia (CAP) within 30 days of hospital discharge. Methods: Observational analysis of a prospective cohort of adults hospitalized with CAP at a tertiary hospital (2007-2009). Additional healthcare interactions were defined as the visits to a primary care centre or emergency department and hospital readmissions within 30 days of discharge. Results: Of the 934 hospitalized patients with CAP, 282 (34.1%) had additional healthcare interactions within 30 days of hospital discharge: 149 (52.8%) needed an additional visit to their primary care centre and 177 (62.8%) attended the emergency department. Seventy-two (25.5%) patients were readmitted to hospital. The main reasons for additional healthcare interactions were worsening of signs or symptoms of CAP and new or worsening comorbid conditions independent of pneumonia, mainly cardiovascular and pulmonary diseases. The only independent factor associated with visits to primary care centre or emergency department was alcohol abuse (odds ratio [OR] = 1.65; 95% confidence interval [CI]: 1.03-2.64). Prior hospitalization (≤ 90 days) (OR = 2.47; 95% CI: 1.11-5.52) and comorbidities (OR = 3.99; 95% CI: 1.12-14.23) were independently associated with rehospitalization. Conclusions: Additional healthcare visits and rehospitalizations within 30 days of hospital discharge are common in patients with CAP. This is mainly due to a worsening of signs or symptoms of CAP and/or comorbid conditions. These findings may have implications for discharge planning and follow-up of patients with CAP.

Morphological and Magnetic Properties of Superparamagnetic Carbon-Coated Fe Nanoparticles Produced by Arc Discharge.

Spherical carbon coated iron particles of nanometric diameter in the 5-10 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 5-8·10 4 Pa of He). The particles exhibit a crystalline dense iron core with an average diameter 7.4 ± 2.0 nm surrounded by a sealed carbon shell, shown by transmission electron microscopy (TEM), selected-area diffrac- tion (SAED), energy-dispersive X-ray analysis (STEM-EDX) and electron energy loss spectroscopy (EELS). The SAED, EDX and EELS results indicate a lack of traces of core oxidized phases showing an efficient protection role of the carbon shell. The magnetic properties of the nanoparticles have been investigated in the 5-300 K temperature range using a superconducting quantum interference device (SQUID). The results reveal a superparamagnetic behaviour with an average monodomain diameter of 7.6 nm of the nanoparticles. The zero field cooled and field cooled (ZFC-FC)magnetization curves show a blocking temperature (TB)at room temperature very suitable for biomedical applications (drug delivery, magnetic resonance imaging-MRI-, hyperthermia).