Discovering the campus together: a mobile and computer-based learning experience

One of the most relevant difficulties faced by first-year undergraduate students is to settle into the educational environment of universities. This paper presents a case study that proposes a computer-assisted collaborative experience designed to help students in their transition from high school to university. This is done by facilitating their first contact with the campus and its services, the university community, methodologies and activities. The experience combines individual and collaborative activities, conducted in and out of the classroom, structured following the Jigsaw Collaborative Learning Flow Pattern. A specific environment including portable technologies with network and computer applications has been developed to support and facilitate the orchestration of a flow of learning activities into a single integrated learning setting. The result is a Computer-Supported Collaborative Blended Learning scenario, which has been evaluated with first-year university students of the degrees of Software and Audiovisual Engineering within the subject Introduction to Information and Communications Technologies. The findings reveal that the scenario improves significantly students’ interest in their studies and their understanding about the campus and services provided. The environment is also an innovative approach to successfully support the heterogeneous activities conducted by both teachers and students during the scenario. This paper introduces the goals and context of the case study, describes how the technology was employed to conduct the learning scenario, the evaluation methods and the main results of the experience.

Securing dynamic itineraries for mobile agent applications

In this paper we present a novel mechanism for the protection of dynamic itineraries for mobile agent applications. Itineraries that are decided as the agent goes are essential in complex applications based on mobile agents, but no approach has been presented until now to protect them. We have conceived a cryptographic scheme for shielding dynamic itineraries from tampering, impersonation and disclosure. By using trust strategically, our scheme provides a balanced trade-off between flexibility and security. Our protection scheme has been thought always bearing in mind a feasible implementation, and thus facilitates the development of applications that make use of it. An example application based on a real healthcare scenario is also presented to show its operation.

Brain Computer Interface for Virtual Reality Control

A brain-computer interface (BCI) is a new communication channel between the human brain and a computer. Applications of BCI systems comprise the restoration of movements, communication and environmental control. In this study experiments were made that used the BCI system to control or to navigate in virtual environments (VE) just by thoughts. BCI experiments for navigation in VR were conducted so far with synchronous BCI and asynchronous BCI systems. The synchronous BCI analyzes the EEG patterns in a predefined time window and has 2 to 3 degrees of freedom.

Extracció de coneixement d'una base de dades d'explotació de màquines recreatives i d'atzar.

L'objectiu de treball ha estat mostrar les possibilitats de les aplicacions informàtiques de gestió sobre les dades amb les que treballen. Simplement mostren les dades guardades a les bases de dades d'explotació, de forma detallada o bé resumida i amb sumatoris. Sobre aquestes dades també es pot extreure coneixement.

Statistics in archaeology: New directions

Connections between Statistics and Archaeology have always appeared veryfruitful. The objective of this paper is to offer an outlook of somestatistical techniques that are being developed in the most recentyears and that can be of interest for archaeologists in the short run.

Xarxa digital multimèdia de pantalles i kioscs interactius

Internet s’ha alçat en poc temps com el mitjà més utilitzat pels turistes per a planificar, organitzar i comprar un viatge, és per això que es proposa donar les mateixes facilitats en el destí. La Publicitat Dinàmica o “Digital Signage” és un nou servei de comunicació que consisteix en un conjunt de tecnologies i aplicacions informàtiques que permeten emetre missatges multimèdia i comunicar-se així d’una manera innovadora amb el públic objectiu de cada empresa, si s’afegeix un sistema independent, multimèdia i interactiu que pot utilitzar-se per a proporcionar informació i/o permetre la realització de transaccions es potencia al màxim el servei. D’aquesta manera es proposa crear una Xarxa Digital Multimèdia de Kioscs Interactius recolzats amb una pantalla de plasma per a la tecnologia Digital Signage. La ubicació escollida estratègicament és en un dels punts de major afluència turística, tal com l’entrada dels hotels. Així es tracta de crear circuits tancats en àrees geogràfiques on es troben els principals nuclis turístics de Mallorca. La possibilitat d’accedir a segments de població altament interessants per al producte o servei es multiplica al ser una manera fàcil, eficaç i altament suggestiva de promocionar el què es pretén. Un avantatge és la simplicitat de la infraestructura tecnològica que es necessita, el dispositiu mitjançant el qual es visualitzaran els missatges serà una pantalla de plasma convencional, i un terminal de punt de venda instal.lat en un lloc de pas. Cada mòdul està connectat a la xarxa ADSL mitjançant un servidor local a Internet. La connexió a la xarxa és imprescindible per a que el manteniment i actualització dels continguts es puguin efectuar remotament. L’objectiu principal d’aquest treball és estudiar la viabilitat de la implantació de la xarxa, mitjançant la realització d’un estudi de mercat on s’analitzen els grups claus per a la implantació: els hotelers, la indústria turística i el Govern Balear. S’identifiquen els beneficis que aportarà al nou servei i les repercussions que tendrà la seva instal.lació. Entre els resultats més destacats d’aquest estudi cal remarcar l’acceptació que ha tengut la idea entre els hotelers entrevistats i la resposta positiva de la indústria turística. Es reconeix: una millora de la imatge del sector, l’ús com a eina de promoció turística pel Govern, i la contribució a la sostenibilitat econòmica pel fet que augmenta la competitivitat de les empreses i això millora la qualitat del servei.

Xarxa digital multimèdia de pantalles i kioscs interactius

Internet s’ha alçat en poc temps com el mitjà més utilitzat pels turistes per a planificar, organitzar i comprar un viatge, és per això que es proposa donar les mateixes facilitats en el destí. La Publicitat Dinàmica o “Digital Signage” és un nou servei de comunicació que consisteix en un conjunt de tecnologies i aplicacions informàtiques que permeten emetre missatges multimèdia i comunicar-se així d’una manera innovadora amb el públic objectiu de cada empresa, si s’afegeix un sistema independent, multimèdia i interactiu que pot utilitzar-se per a proporcionar informació i/o permetre la realització de transaccions es potencia al màxim el servei. D’aquesta manera es proposa crear una Xarxa Digital Multimèdia de Kioscs Interactius recolzats amb una pantalla de plasma per a la tecnologia Digital Signage. La ubicació escollida estratègicament és en un dels punts de major afluència turística, tal com l’entrada dels hotels. Així es tracta de crear circuits tancats en àrees geogràfiques on es troben els principals nuclis turístics de Mallorca. La possibilitat d’accedir a segments de població altament interessants per al producte o servei es multiplica al ser una manera fàcil, eficaç i altament suggestiva de promocionar el què es pretén. Un avantatge és la simplicitat de la infraestructura tecnològica que es necessita, el dispositiu mitjançant el qual es visualitzaran els missatges serà una pantalla de plasma convencional, i un terminal de punt de venda instal.lat en un lloc de pas. Cada mòdul està connectat a la xarxa ADSL mitjançant un servidor local a Internet. La connexió a la xarxa és imprescindible per a que el manteniment i actualització dels continguts es puguin efectuar remotament. L’objectiu principal d’aquest treball és estudiar la viabilitat de la implantació de la xarxa, mitjançant la realització d’un estudi de mercat on s’analitzen els grups claus per a la implantació: els hotelers, la indústria turística i el Govern Balear. S’identifiquen els beneficis que aportarà al nou servei i les repercussions que tendrà la seva instal.lació. Entre els resultats més destacats d’aquest estudi cal remarcar l’acceptació que ha tengut la idea entre els hotelers entrevistats i la resposta positiva de la indústria turística. Es reconeix: una millora de la imatge del sector, l’ús com a eina de promoció turística pel Govern, i la contribució a la sostenibilitat econòmica pel fet que augmenta la competitivitat de les empreses i això millora la qualitat del servei.

Sistema de Informació i Gestió Integral de la Producció Pesquera Internacional (SIGIPPI)

Des de la ciència geogràfica combinada amb el coneixement biològic i comercial, aquest projecte pretén crear una eina basada en la biogeografia i les últimes tecnologies de la Informació Geogràfica, que permetrà a l’usuari disposar de informació actualitzada per cada espècie amb interès comercial. El projecte es basa en el desenvolupament d’una aplicació web de consulta, entrada i actualització de dades referents a la producció pesquera internacional. Les eines utilitzades són les bases de dades MySQL i PostgreSQL i programació web amb html, php i javacript. Aquesta aplicació està pensada per ser accessible des de qualsevol ordinador amb connexió a internet i es subdivideix en tres sub-aplicacions. La primera sub-aplicació es basa en l’entrada d’espècies a partir de l’estructura taxonòmica. Partint de l’arbre taxonòmic, l’usuari té la possibilitat d’entrar, eliminar o modificar qualsevol tàxon o espècie. La segona subaplicació és una eina de digitalització cartogràfica on-line on l’usuari podrà marcar, eliminar o modificar sobre un mapa les localitzacions de les espècies que estiguin entrades en la sub-aplicació anterior. Finalment, la tercera sub-aplicació és una eina d’entrada de dades quinzenals referent als comportaments pel que fa tan a les dimensions com a les disponibilitats de pesca per cada espècie i localització.

Analyzing the effects of transient faults into applications

As computer chips implementation technologies evolve to obtain more performance, those computer chips are using smaller components, with bigger density of transistors and working with lower power voltages. All these factors turn the computer chips less robust and increase the probability of a transient fault. Transient faults may occur once and never more happen the same way in a computer system lifetime. There are distinct consequences when a transient fault occurs: the operating system might abort the execution if the change produced by the fault is detected by bad behavior of the application, but the biggest risk is that the fault produces an undetected data corruption that modifies the application final result without warnings (for example a bit flip in some crucial data). With the objective of researching transient faults in computer system’s processor registers and memory we have developed an extension of HP’s and AMD joint full system simulation environment, named COTSon. This extension allows the injection of faults that change a single bit in processor registers and memory of the simulated computer. The developed fault injection system makes it possible to: evaluate the effects of single bit flip transient faults in an application, analyze an application robustness against single bit flip transient faults and validate fault detection mechanism and strategies.

Exploring Cross-layer power management for PGAS applications on the SCC platform

Technological limitations and power constraints are resulting in high-performance parallel computing architectures that are based on large numbers of high-core-count processors. Commercially available processors are now at 8 and 16 cores and experimental platforms, such as the many-core Intel Single-chip Cloud Computer (SCC) platform, provide much higher core counts. These trends are presenting new sets of challenges to HPC applications including programming complexity and the need for extreme energy efficiency.In this work, we first investigate the power behavior of scientific PGAS application kernels on the SCC platform, and explore opportunities and challenges for power management within the PGAS framework. Results obtained via empirical evaluation of Unified Parallel C (UPC) applications on the SCC platform under different constraints, show that, for specific operations, the potential for energy savings in PGAS is large; and power/performance trade-offs can be effectively managed using a cross-layerapproach. We investigate cross-layer power management using PGAS language extensions and runtime mechanisms that manipulate power/performance tradeoffs. Specifically, we present the design, implementation and evaluation of such a middleware for application-aware cross-layer power management of UPC applications on the SCC platform. Finally, based on our observations, we provide a set of recommendations and insights that can be used to support similar power management for PGAS applications on other many-core platforms.

Electronic voting system for computer supported collaborative learning

The EVS4CSCL project starts in the context of a Computer Supported Collaborative Learning environment (CSCL). Previous UOC projects created a CSCL generic platform (CLPL) to facilitate the development of CSCL applications. A discussion forum (DF) was the first application developed over the framework. This discussion forum was different from other products on the marketplace because of its focus on the learning process. The DF carried out the specification and elaboration phases from the discussion learning process but there was a lack in the consensus phase. The consensus phase in a learning environment is not something to be achieved but tested. Common tests are done by Electronic Voting System (EVS) tools, but consensus test is not an assessment test. We are not evaluating our students by their answers but by their discussion activity. Our educational EVS would be used as a discussion catalyst proposing a discussion about the results after an initial query or it would be used after a discussion period in order to manifest how the discussion changed the students mind (consensus). It should be also used by the teacher as a quick way to know where the student needs some reinforcement. That is important in a distance-learning environment where there is no direct contact between the teacher and the student and it is difficult to detect the learning lacks. In an educational environment, assessment it is a must and the EVS will provide direct assessment by peer usefulness evaluation, teacher marks on every query created and indirect assessment from statistics regarding the user activity.

Route optimization and customization using real geographical data in Android mobile devices

Nowadays, there are several services and applications that allow users to locate and move to different tourist areas using a mobile device. These systems can be used either by internet or downloading an application in concrete places like a visitors centre. Although such applications are able to facilitate the location and the search for points of interest, in most cases, these services and applications do not meet the needs of each user. This paper aims to provide a solution by studying the main projects, services and applications, their routing algorithms and their treatment of the real geographical data in Android mobile devices, focusing on the data acquisition and treatment to improve the routing searches in off-line environments.

Human-Computer Interaction with older people through ethnographical lenses: everyday interactions with ICT

Report for the scientific sojourn carried out at the School of Computing of the University of Dundee, United Kingdom, from 2010 to 2012. This document is a scientific report of the work done, main results, publications and accomplishment of the objectives of the 2-year post-doctoral research project with reference number BP-A 00239. The project has addressed the topic of older people (60+) and Information and Communication Technologies (ICT), which is a topic of growing social and research interest, from a Human-Computer Interaction perspective. Over a 2-year period (June 2010-June 2012), we have conducted classical ethnography of ICT use in a computer clubhouse in Scotland, addressing interaction barriers and strategies, social sharing practices in Social Network Sites, and ICT learning, and carried out rapid ethnographical studies related to geo-enabled ICT and e-government services towards supporting independent living and active ageing. The main results have provided a much deeper understanding of (i) the everyday use of Computer-Mediated Communication tools, such as video-chats and blogs, and its evolution as older people’s experience with ICT increases over time, (ii) cross-cultural aspects of ICT use in the north and south of Europe, (iii) the relevance of cognition over vision in interacting with geographical information and a wide range of ICT tools, despite common stereotypes (e.g. make things bigger), (iv) the important relationship offline-online to provide older people with socially inclusive and meaningful eservices for independent living and active ageing, (v) how older people carry out social sharing practices in the popular YouTube, (vi) their user experiences and (vii) the challenges they face in ICT learning and the strategies they use to become successful ICT learners over time. The research conducted in this project has been published in 17 papers, 4 in journals – two of which in JCR, 5 in conferences, 4 in workshops and 4 in magazines. Other public output consists of 10 invited talks and seminars.

Traducción técnica del capítulo III del libro Advanced Data Warehouse design: from conventional to spatial and temporal applications

The proposal to work on this final project came after several discussions held with Dr. Elzbieta Malinowski Gadja, who in 2008 published the book entitled Advanced Data Warehouse Design: From Conventional to Spatial and Temporal Applications (Data-Centric Systems and Applications). The project was carried out under the technical supervision of Dr. Malinowski and the direct beneficiary was the University of Costa Rica (UCR) where Dr. Malinowski is a professor at the Department of Computer Science and Informatics. The purpose of this project was twofold: First, to translate chapter III of said book with the intention of generating educational material for the use of the UCR and, second, to venture in the field of technical translation related to data warehouse. For the first component, the goal was to generate a final product that would eventually serve as an educational tool for the post-graduate courses of the UCR. For the second component, this project allowed me to acquire new skills and put into practice techniques that have helped me not only to perfom better in my current job as an Assistant Translator of the Inter-American BAnk (IDB), but also to use them in similar projects. The process was lenggthy and required torough research and constant communication with the author. The investigation focused on the search of terms and definitions to prepare the glossary, which was the basis to start the translation project. The translation process itself was carried out by phases, so that comments and corrections by the author could be taken into account in subsequent stages. Later, based on the glossary and the translated text, illustrations had been created in the Visio software were translated. In addition to the technical revision by the author, professor Carme Mangiron was in charge of revising the non-technical text. The result was a high-quality document that is currently used as reference and study material by the Department of Computer Science and Informatics of Costa Rica.

Planar homography: accuracy analysis and applications

Projective homography sits at the heart of many problems in image registration. In addition to many methods for estimating the homography parameters (R.I. Hartley and A. Zisserman, 2000), analytical expressions to assess the accuracy of the transformation parameters have been proposed (A. Criminisi et al., 1999). We show that these expressions provide less accurate bounds than those based on the earlier results of Weng et al. (1989). The discrepancy becomes more critical in applications involving the integration of frame-to-frame homographies and their uncertainties, as in the reconstruction of terrain mosaics and the camera trajectory from flyover imagery. We demonstrate these issues through selected examples