Adverse Selection, Credit, and Efficiency: the Case of the Missing Market

We analyze a standard environment of adverse selection in credit markets. In our envi- ronment, entrepreneurs who are privately informed about the quality of their projects need to borrow from banks. As is generally the case in economies with adverse selection, the competitive equilibrium of our economy is shown to be ine¢ cient. Under adverse selection, the choices made by one type of agents limit what can be o¤ered to other types in an incentive-compatible manner. This gives rise to an externality, which cannot be internalized in a competitive equilibrium. We show that, in this type of environment, the ine¢ ciency associated to adverse selection is the consequence of one implicit assumption: entrepreneurs can only borrow from banks. If an additional market is added (say, a .security market.), in which entrepreneurs can obtain funds beyond those o¤ered by banks, we show that the e¢ cient allocation is an equilibrium of the economy. In such an equilibrium, all entrepreneurs borrow at a pooling rate in the security market. When they apply to bank loans, though, only entrepreneurs with good projects pledge these additional funds as collateral. This equilibrium thus simultaneously entails cross- subsidization and separation between di¤erent types of entrepreneurs.

Nanosized Nb-TiO2 gas sensors derived from alkoxides hydrolization

Nanocrystalline TiO2 modified with Nb has been produced through the sol-gel technique. Nanopowders have been obtained by means of the hydrolysis of pure alkoxides with deionized water and peptization of the resulting hydrolysate with diluted acid nitric at 100 C. The addition of Nb stabilizes the anatase phase to higher temperatures. XRD spectra of the undoped and the Nb-doped samples show that the undoped sample has been almost totally converted to rutile at 600 C, meanwhile the doped samples present still a low percentage of rutile phase. Nanocrystalline powders stabilized at 600 C with grain sizes of about 17 nm have successfully been synthesized by the addition of Nb with a concentration of 2% at., which appears to be an adequate additive concentration to improve the gas sensor performances, such as it is suggested by the catalytic conversion efficiency experiments performed from FTIR measurements. FTIR absorbance spectra show that catalytic conversion of CO occurs at lower temperatures when niobium is introduced. The electrical response of the films to different concentrations of CO and ethanol has been monitored in dry and wet environments in order to test the influence of humidity in the sensor response. The addition of Nb decreases the working temperature and increases the stability of the layers. Also, large enhancement of the response time is obtained even with lower working temperatures. Moreover, humidity effects on the gas sensor response toward CO and ethanol are less important in Nb-doped samples than in the undoped ones.

Nanosized Nb-TiO2 gas sensors derived from alkoxides hydrolization

Nanocrystalline TiO2 modified with Nb has been produced through the sol-gel technique. Nanopowders have been obtained by means of the hydrolysis of pure alkoxides with deionized water and peptization of the resulting hydrolysate with diluted acid nitric at 100 C. The addition of Nb stabilizes the anatase phase to higher temperatures. XRD spectra of the undoped and the Nb-doped samples show that the undoped sample has been almost totally converted to rutile at 600 C, meanwhile the doped samples present still a low percentage of rutile phase. Nanocrystalline powders stabilized at 600 C with grain sizes of about 17 nm have successfully been synthesized by the addition of Nb with a concentration of 2% at., which appears to be an adequate additive concentration to improve the gas sensor performances, such as it is suggested by the catalytic conversion efficiency experiments performed from FTIR measurements. FTIR absorbance spectra show that catalytic conversion of CO occurs at lower temperatures when niobium is introduced. The electrical response of the films to different concentrations of CO and ethanol has been monitored in dry and wet environments in order to test the influence of humidity in the sensor response. The addition of Nb decreases the working temperature and increases the stability of the layers. Also, large enhancement of the response time is obtained even with lower working temperatures. Moreover, humidity effects on the gas sensor response toward CO and ethanol are less important in Nb-doped samples than in the undoped ones.

On-line event detection by recursive dynamic principal component analysis and gas sensor arrays under drift conditions

Leakage detection is an important issue in many chemical sensing applications. Leakage detection hy thresholds suffers from important drawbacks when sensors have serious drifts or they are affected by cross-sensitivities. Here we present an adaptive method based in a Dynamic Principal Component Analysis that models the relationships between the sensors in the may. In normal conditions a certain variance distribution characterizes sensor signals. However, in the presence of a new source of variance the PCA decomposition changes drastically. In order to prevent the influence of sensor drifts the model is adaptive and it is calculated in a recursive manner with minimum computational effort. The behavior of this technique is studied with synthetic signals and with real signals arising by oil vapor leakages in an air compressor. Results clearly demonstrate the efficiency of the proposed method.

From lattice-gas models to nonlinear diffusion models: A derivation of macroscopic equations and fluctuations

We derive nonlinear diffusion equations and equations containing corrections due to fluctuations for a coarse-grained concentration field. To deal with diffusion coefficients with an explicit dependence on the concentration values, we generalize the Van Kampen method of expansion of the master equation to field variables. We apply these results to the derivation of equations of phase-separation dynamics and interfacial growth instabilities.

Energy efficiency determinants: An empirical analysis of Spanish innovative firms

This paper examines the extent to which innovative Spanish firms pursue improvements in energy efficiency (EE) as an objective of innovation. The increase in energy consumption and its impact on greenhouse gas emissions justifies the greater attention being paid to energy efficiency and especially to industrial EE. The ability of manufacturing companies to innovate and improve their EE has a substantial influence on attaining objectives regarding climate change mitigation. Despite the effort to design more efficient energy policies, the EE determinants in manufacturing firms have been little studied in the empirical literature. From an exhaustive sample of Spanish manufacturing firms and using a logit model, we examine the energy efficiency determinants for those firms that have innovated. To carry out the econometric analysis, we use panel data from the Community Innovation Survey for the period 2008‐2011. Our empirical results underline the role of size among the characteristics of firms that facilitate energy efficiency innovation. Regarding company behaviour, firms that consider the reduction of environmental impacts to be an important objective of innovation and that have introduced organisational innovations are more likely to innovate with the objective of increasing energy efficiency. Keywords: energy efficiency, corporate targets, innovation, Community Innovation Survey. JEL Classification: Q40, Q55, O31

Balancing effluent quality, economic cost and greenhouse gas emissions during the evaluation of (plant-wide) control/operational strategies in WWTPs

The objective of this paper was to show the potential additional insight that result from adding greenhouse gas (GHG) emissions to plant performance evaluation criteria, such as effluent quality (EQI) and operational cost (OCI) indices, when evaluating (plant-wide) control/operational strategies in wastewater treatment plants (WWTPs). The proposed GHG evaluation is based on a set of comprehensive dynamic models that estimate the most significant potential on-site and off-site sources of CO2, CH4 and N2O. The study calculates and discusses the changes in EQI, OCI and the emission of GHGs as a consequence of varying the following four process variables: (i) the set point of aeration control in the activated sludge section; (ii) the removal efficiency of total suspended solids (TSS) in the primary clarifier; (iii) the temperature in the anaerobic digester; and (iv) the control of the flow of anaerobic digester supernatants coming from sludge treatment. Based upon the assumptions built into the model structures, simulation results highlight the potential undesirable effects of increased GHG production when carrying out local energy optimization of the aeration system in the activated sludge section and energy recovery from the AD. Although off-site CO2 emissions may decrease, the effect is counterbalanced by increased N2O emissions, especially since N2O has a 300-fold stronger greenhouse effect than CO2. The reported results emphasize the importance and usefulness of using multiple evaluation criteria to compare and evaluate (plant-wide) control strategies in a WWTP for more informed operational decision making

Efficiency and environmental regulation: a 'complex situation'

Production of desirable outputs is often accompanied by undesirable by products that have damaging effects on the environment, and whose disposal is frequently regulated by public authorities. In this paper, we compute directional technology distance functions under particular assumptions concerning disposability of bads in order to test for the existence of what we call ‘complex situations’, where the biggest producer is not the greatest polluter. Furthermore, we show that how in such situations, environmental regulation could achieve an effective reduction in the aggregate level of bad outputs without reducing the production of good outputs. Finally, we illustrate our methodology with an empirical application to a sample of Spanish tile ceramic producers.

Efficiency and quality in local government management: the case of Spanish local authorities

This study analyses efficiency levels in Spanish local governments and their determining factors through the application of DEA (Data Envelopment Analysis) methodology. It aims to find out to what extent inefficiency arises from external factors beyond the control of the entity, or on the other hand, how much it is due to inadequate management of productive resources. The results show that on the whole, there is still a wide margin within which managers could increase local government efficiency levels, although it is revealed that a great deal of inefficiency is due to exogenous factors. It is specifically found that the size of the entity, per capita tax revenue, the per capita grants or the amount of commercial activity are some of the factors determining local government inefficiency.

Composition of Greenhouse Gas Emissions in Spain: an Input-Output Analysis

Extending the traditional input-output model to account for the environmental impacts of production processes reveals the channels by which environmental burdens are transmitted throughout the economy. In particular, the environmental input-output approach is a useful technique for quantifying the changes in the levels of greenhouse emissions caused by changes in the final demand for production activities. The inputoutput model can also be used to determine the changes in the relative composition of greenhouse gas emissions due to exogenous inflows. In this paper we describe a method for evaluating how the exogenous changes in sectorial demand, such as changes in private consumption, public consumption, investment and exports, affect the relative contribution of the six major greenhouse gases regulated by the Kyoto Protocol to total greenhouse emissions. The empirical application is for Spain, and the economic and environmental data are for the year 2000. Our results show that there are significant differences in the effects of different sectors on the composition of greenhouse emissions. Therefore, the final impact on the relative contribution of pollutants will basically depend on the activity that receives the exogenous shock in final demand, because there are considerable differences in the way, and the extent to which, individual activities affect the relative composition of greenhouse gas emissions. Keywords: Greenhouse emissions, composition of emissions, sectorial demand, exogenous shock.

Consumption externalities, habit formation, and equilibrium efficiency

We analyze the welfare properties of the competitive equilibrium in a capital accumulation model where individual preferences are subjected to both habit formation and consumption spillovers. We also discuss how consumption externalities and habits interact to generate an inefficient dynamic equilibrium. Finally, we characterize optimal tax policies aimed to restore efficient decentralized paths.

A dual characterization of incentive efficiency

We show that incentive efficient allocations in economies with adverse selection and moral hazard can be determined as optimal solutions to a linear programming problem and we use duality theory to obtain a complete characterization of the optima. Our dual analysis identifies welfare effects associated with the incentives of the agents to truthfully reveal their private information. Because these welfare effects may generate non-convexities, incentive efficient allocations may involve randomization. Other properties of incentive efficient allocations are also derived.

Allocative and productive efficiency in REE with asymetric information

We characterize the divergence between informational and economic efficiency in a rational expectations competitive market with asymmetric information about the costs of production. We find that prices may contain too much or too little information with respect to incentive efficient allocations depending on whether the main role of the price is, respectively, the traditional as index of scarcity or informational. Only when REE degenerate to Cournot equilibria the market solution does not show llocative inefficiency. With multidimensional uncertainty we find that the REE price does not have in general the incentive efficient information mix: It pays to sacrifice allocative efficiency at the REE to improve productive efficiency.

Public enterprise reforms and efficiency in regulated environments: the case of the postal sector

Purpose - This paper focuses on analyzing the effect that public reforms have on the efficiency of state-owned enterprises in regulated environments. Design/methodology/approach - The research is focused in the postal sector where public and private companies must obey a legal framework related to provide a universal service. The analysis is carried out using a panel of 7 European postal operators for the period 1997-2003. The activity analyzed was the letter mail division; we take as key variable the unit cost of a letter and use a translog cost function where as independent variables we include traffic levels, labor cost per employee, quality and availability of the service as well as the type of ownership (public or private). Additionally, in a second stage the geographical differences among countries are considered. Findings - Results indicate that postal operators that experienced organizational changes without being privatized, such as the Spanish and Greek operators, do not have higher unit costs than privatized postal operators like the one of Germany and the Netherlands. Moreover, we find that in all cases the operator of Ireland appear to be the most efficient. In this case restructuring process has been carried out giving an important leadership role to workers. This suggests us that labor culture could be a key variable to study when analyzing reform processes in public enterprises. Originality/value - Our findings show that in a regulated environment like in the postal sector, public and private companies can obtain similar efficiency levels in term of unit costs.

Cooperative production and efficiency

We characterize the sharing rule for which a contribution mechanism achieves efficiency in a cooperative production setting when agents are heterogeneous. The sharing rule bears no resemblance to those considered by the previous literature. We also show for a large class of sharing rules that if Nash equilibrium yields efficient allocations, the production function displays constant returns to scale, a case in which cooperation in production is useless.