Towards reusability and tailorability in collaborative learning systems using IMS-LD and grid services

CSCL applications are complex distributed systems that posespecial requirements towards achieving success in educationalsettings. Flexible and efficient design of collaborative activitiesby educators is a key precondition in order to provide CSCL tailorable systems, capable of adapting to the needs of eachparticular learning environment. Furthermore, some parts ofthose CSCL systems should be reused as often as possible inorder to reduce development costs. In addition, it may be necessary to employ special hardware devices, computational resources that reside in other organizations, or even exceed thepossibilities of one specific organization. Therefore, theproposal of this paper is twofold: collecting collaborativelearning designs (scripting) provided by educators, based onwell-known best practices (collaborative learning flow patterns) in a standard way (IMS-LD) in order to guide the tailoring of CSCL systems by selecting and integrating reusable CSCL software units; and, implementing those units in the form of grid services offered by third party providers. More specifically, this paper outlines a grid-based CSCL system having these features and illustrates its potential scope and applicability by means of a sample collaborative learning scenario.

Decentralized model reference control of flexible cable-stayed beam structures

A decentralized model reference controller is designed to reduce the magnitude of the transversal vibration of a flexible cable-stayed beam structure induced by a seismic excitation. The controller design is made based on the principle of sliding mode such that a priori knowledge

A mixed H2/H∞-based semiactive control for vibration mitigation in flexible structures

In this paper, we address this problem through the design of a semiactive controller based on the mixed H2/H∞ control theory. The vibrations caused by the seismic motions are mitigated by a semiactive damper installed in the bottom of the structure. It is meant by semiactive damper, a device that absorbs but cannot inject energy into the system. Sufficient conditions for the design of a desired control are given in terms of linear matrix inequalities (LMIs). A controller that guarantees asymptotic stability and a mixed H2/H∞ performance is then developed. An algorithm is proposed to handle the semiactive nature of the actuator. The performance of the controller is experimentally evaluated in a real-time hybrid testing facility that consists of a physical specimen (a small-scale magnetorheological damper) and a numerical model (a large-scale three-story building)

Let's talk: how communication affects contract design

We study experimentally how the ability to communicate affects the frequency and effectiveness of flexible and inflexible contracts in a bilateral trade context where sellers can adjust trade quality after observing a post-contractual cost shock and a discretionary buyer transfer. In the absence of communication, we find that rigid contracts are more frequent and lead to higher earnings for both buyer and seller. By contrast, in the presence of communication, flexible contracts are much more frequent and considerably more productive, both for buyers and sellers. Also, both buyer and seller earn considerably more from flexible with communication than rigid without communication. Our results show quite strongly that communication, a normal feature in contracting, can remove the potential cost of flexibility (disagreements caused by conflicting perceptions). We offer an explanation based on social norms.

Geometría flexible para las estructuras de barras

This article brings a geometric proposal which can be applied to the bar structures. The starting point is the substitution of the usual knots in a structural web by a system of combining the bars tivo by two, which is achieved by twisting the bars in each knot. The tensile forces that appear and the introduction of joints in each of these knots allow the transition from a rigid or undeformablegeometiy to a neiv flexible" one leading to the possibility of one and the same structural web adopting different sizes while preserving its original geometric form

Implantació d'un sistema SCADA en una cèl·lula flexible de fabricació

La Universitat de Vic disposa, entre altres equips, d’una cèl·lula flexible de fabricació, del fabricant Festo, que simula un procés de formació de palets amb els productes que es disposen en un magatzem intermedi. Aquesta cèl·lula està composta de quatre estacions de muntatge diferenciades (càrrega de palets, càrrega de plaques, magatzem intermedi i transport). Cada una disposa d'un PLC SIEMENS S7-300 per la seva automatització, i tots aquests es troben interconnectats amb una xarxa industrial Profibus. L'objectiu d'aquest projecte és implantar el sistema SCADA Vijeo Citect pel control i supervisió de l'estació magatzem d'aquesta cèl·lula flexible de fabricació, establint també un intercanvi de dades entre l'SCADA i el Microsoft Access, per poder ser utilitzat per la docència. Aquest projecte s'ha desenvolupat en cinc fases diferents: 1. La primera fase s'ha dedicat a l'automatització pròpiament de l'estació magatzem a partir de l'autòmat programable Siemens S7-300 i complint amb les necessitats plantejades. 2. En la segona fase s'ha programat i establert la comunicació per l'intercanvi de dades (lectura i escriptura) entre el sistema SCADA Vijeo Citect i la base de dades de Microsoft Access. 3. En la tercera fase s'ha elaborat i programat l'entorn gràfic de supervisió i control del procés a partir del sistema SCADA Vijeo Citect. 4. En la quarta fase s'ha instal·lat un OPC Server en el PC i s'ha establert la comunicació entre el PLC i el sistema SCADA. 5. Finalment s'ha anat revisant i depurant les diferents programacions i comunicacions per tal de que el sistema funcioni com a un conjunt.

Implementació d’un sistema SCADA a la cèl·lula de fabricació flexible MPS+2000C

L’Escola Politècnica Superior de la Universitat de Vic disposa d’una cèl·lula de fabricació flexible del fabricant Festo, que simula un procés d’emmagatzematge automàtic, aquesta cèl·lula esta composta per quatre estacions de muntatge diferenciades i independents, l’estació palets, l’estació plaques, l’estació magatzem intermedi i l’estació transport. Cada una d’aquestes estacions està formada per sensors i actuadors elèctrics i pneumàtics del fabricant Festo que van connectats a un PLC SIEMENS S7-300.Els quatre PLC’s (un per cada estació) estan connectats entre ells mitjançant el bus de comunicacions industrials Profibus. L’objectiu d’aquest treball consisteix en l’adaptació de la programació dels PLC’s i la realització d’un SCADA per tal de controlar el funcionament del conjunt de la cèl·lula de fabricació a través del software Vijeo Citect, d’aquesta manera es coneixerà el funcionament de la cèl·lula i permetrà treure’n rendiment per la docència. Aquest projecte ha estat realitzat en quatre fases principals. 1. Estudi i coneixement de les estacions, en aquesta fase s’han estudiat els manuals de funcionament de les estacions i s’han interpretat els codis de programació dels seus PLCs, amb l’objectiu de conèixer bé el programa per tal de interaccionar-hi més endavant amb el sistema SCADA 2. Disseny i programació del sistema SCADA, en aquesta fase s’ha realitzat tot el disseny gràfic de les pantalles de la interfície SCADA així com la programació dels objectes, la connexió amb els PLCs i la base de dades. 3. Posada en marxa del sistema complert, quan es coneixia abastament el funcionament de les estacions i el sistema SCADA estava completat s’ha fet la posada en marxa del conjunt i s’ha comprovat el correcte funcionament i interacció dels sistemes. 4. Realització de la memòria del projecte, en aquesta ultima fase s’ha realitzat la memòria del projecte on s’expliquen les característiques i funcionament de totes les estacions i del sistema SCADA. La conclusió més rellevant obtinguda en aquest treball, és la clara visualització de la potència i simplicitat que han aportat els sistemes SCADA al món de l’automatització, anys enrere per la supervisió de l’estat d’un sistema automatitzat era necessari disposar d’un gran espai amb grans panells de control formats per una gran quantitat de pilots lluminosos, potenciòmetres, interruptors, polsadors, displays i sobretot un voluminós i complexa cablejat, gràcies als sistemes SCADA avui en dia tot això pot quedar reduït a un PC o terminal tàctil, amb pantalles gràfiques clares i una gran quantitat d’opcions de supervisió control i configuració del sistema automatitzat.

On the design of peer punishment experiments

We discuss how technologies of peer punishment might bias the results that are observed in experiments. A crucial parameter is the “fine-to-fee” ratio, which describes by how much the punished subjects income is reduced relatively to the fee the punishing subject has to pay to inflict punishment. We show that a punishment technology commonly used in experiments embeds a variable fine-to-fee ratio and show that it confounds the empirical findings about why, whom, and how much subjects punish.

Competition with forward contracts: a laboratory analysis motivated by electricity market design

We use experiments to study the efficiency effects for a market as a whole of adding the possibility of forward contracting to a pre-existing spot market. We deal separately with the cases where spot market competition is in quantities and where it is in supply functions. In both cases we compare the effect of adding a contract market with the introduction of an additional competitor, changing the market structure from a triopoly to a quadropoly. We find that, as theory suggests, for both types of competition the introduction of a forward market significantly lowers prices. The combination of supply function competition with a forward market leads to high efficiency levels.

1st National Accessiblity Plan 2004-2012: achieving equal opportunities and full participation through design for all

According to official statistics, disabled people in Spain number 3.5 million and make up 8.8% of the Spanish population. This group of people are increasingly being recognised as members of society with equal rights, and many of their demands are gradually being transformed into solutions that benefit society as a whole. One example is improved accessibility. Accessible built environments are more human and inclusive places, as well as being easier to get around. Improved accessibility is now recognised as a requirement shared by all members of society, although it is achieved thanks to the demands of disabled people and their representatives. The 1st National Accessibility Plan is a strategic framework for action aimed at ensuring that new products, services and built environments are designed to be accessible for as many people as possible (Design for All) and that existing ones are gradually duly adapted.

Equity and CO2 emissions distribution in climate change integrated assessment

Emissions distribution is a focus variable for the design of future international agreements to tackle global warming. This paper specifically analyses the future path of emissions distribution and its determinants in different scenarios. Whereas our analysis is driven by tools which are typically applied in the income distribution literature and which have recently been applied to the analysis of CO2 emissions distribution, a new methodological approach is that our study is driven by simulations run with a popular regionalised optimal growth climate change model over the 1995-2105 period. We find that the architecture of environmental policies, the implementation of flexible mechanisms and income concentration are key determinants of emissions distribution over time. In particular we find a robust positive relationship between measures of inequalities.

Lectura de máquinas recreativas con terminal portátil

Servimatic S.L. utiliza un terminal electrónico, prácticamente obsoleto hoy en día, el cual lleva incorporado un lector de infrarrojos y una impresora integrada parcialmente. El problema se plantea cuando la empresa encargada de los componentes de infrarrojos y de las impresoras prevé, en un futuro próximo, el cierre del ciclo de vida de estos productos, dejando de dar soporte de mantenimiento y reparación de los mismos. Nuestra intención es realizar un sistema que nos permita automatizar el proceso de recaudación de máquinas recreativas, capaz de adaptarse a la gran variedad de fabricantes que conviven en el mercado y de sustituir el actual sistema.

RADIC II: a fault tolerant architecture with flexible dynamic redundancy

The demand for computational power has been leading the improvement of the High Performance Computing (HPC) area, generally represented by the use of distributed systems like clusters of computers running parallel applications. In this area, fault tolerance plays an important role in order to provide high availability isolating the application from the faults effects. Performance and availability form an undissociable binomial for some kind of applications. Therefore, the fault tolerant solutions must take into consideration these two constraints when it has been designed. In this dissertation, we present a few side-effects that some fault tolerant solutions may presents when recovering a failed process. These effects may causes degradation of the system, affecting mainly the overall performance and availability. We introduce RADIC-II, a fault tolerant architecture for message passing based on RADIC (Redundant Array of Distributed Independent Fault Tolerance Controllers) architecture. RADIC-II keeps as maximum as possible the RADIC features of transparency, decentralization, flexibility and scalability, incorporating a flexible dynamic redundancy feature, allowing to mitigate or to avoid some recovery side-effects.

From creative ideas to new emerging ventures: the process of identification and exploitation among finnish design entrepreneurs

This study focuses on identification and exploitation processes among Finnish design entrepreneurs (i.e. selfemployed industrial designers). More specifically, this study strives to find out what design entrepreneurs do when they create new ventures, how venture ideas are identified and how entrepreneurial processes are organized to identify and exploit such venture ideas in the given industrial context. Indeed, what does educated and creative individuals do when they decide to create new ventures, where do the venture ideas originally come from, and moreover, how are venture ideas identified and developed into viable business concepts that are introduced on the markets? From an academic perspective: there is a need to increase our understanding of the interaction between the identification and exploitation of emerging ventures, in this and other empirical contexts. Rather than assuming that venture ideas are constant in time, this study examines how emerging ideas are adjusted to enable exploitation in dynamic market settings. It builds on the insights from previous entrepreneurship process research. The interpretations from the theoretical discussion build on the assumption that the subprocesses of identification and exploitation interact, and moreover, they are closely entwined with each other (e.g. McKelvie & Wiklund, 2004, Davidsson, 2005). This explanation challenges the common assumption that entrepreneurs would first identify venture ideas and then exploit them (e.g. Shane, 2003). The assumption is that exploitation influences identification, just as identification influences exploitation. Based on interviews with design entrepreneurs and external actors (e.g. potential customers, suppliers and collaborators), it appears as identification and exploitation of venture ideas are carried out in close interaction between a number of actors, rather than alone by entrepreneurs. Due to their available resources, design entrepreneurs have a desire to focus on identification related activities and to find external actors that take care of exploitation related activities. The involvement of external actors may have a direct impact on decisionmaking and various activities along the processes of identification and exploitation, which is something that previous research does not particularly emphasize. For instance, Bhave (1994) suggests both operative and strategic feedback from the market, but does not explain how external parties are actually involved in the decisionmaking, and in carrying out various activities along the entrepreneurial process.