Fear assessment in pigs exposed to a novel object test

The experiment aimed to study approach and locomotive behaviour as indicators of fear in a novel object test carried out in pigs. Thirty post-weaning (30 kg) and 30 finishing (90 kg) pigs were exposed to visual, auditory and olfactory novel stimuli during 2 different experiments. The facilities consisted of a test pen in which a trough was located. The trough contained chopped apples. Once the animals were trained to enter the test pen individually they were subjected to 3 different fear stimuli. These stimuli were applied in the test pen and next to the trough. The variables studied were feeding behaviour, approach behaviour (the distance and position of the animal with respect to the trough) and locomotive behaviour (general activity, reluctance to move, turning back and retreat attempts). Two groups were studied: saline and midazolam treated group. Twenty minutes before the start of the sessions, 15 post-weaning and finishing pigs received an intramuscular injection of 0.20 and 0.15 mg/kg, respectively, midazolam (Dormicum1). The saline pigs (15 animals per group) were injected with saline. The administration of midazolam increased the feeding behaviour and approaching behaviour, and reduced the locomotive behaviour. In front of the visual and olfactory stimuli post-weaning pigs showed a higher general activity than finishing pigs, but the contrary was found when the auditory stimulus was applied. The olfactory stimulus was more related to the turning back behaviour, whereas the visual stimulus was more related to retreat attempts. Although it could be concluded that reluctant to move was the most common response to the different fear stimuli applied in our study regardless of the age of animals, the combination of reluctant to move and turning back would be a good criterion to assess fear in domestic pigs. The use of midazolam as anxiolytic for studies of fear in commercial conditions in pigs is recommended.

Implantació d'un sistema de gestió integrada: ISO 9001:00, ISO 14001:04 i OHSAS 18001:07, en un centre d'estètica i perruqueria

En aquests últims anys, són moltes les empreses que han optat per la utilització de sistemes de gestió normalitzats, per a garantir la rendibilitat i fiabilitat dels resultats de la implantació del sistema de gestió en qüestió. A la dècada dels 90 va ser quan la implantació de sistemes de gestió va començar a ser important en la majoria de sectors econòmics. L’evolució en els sistemes de gestió a trets generals va iniciar-se primerament en l’àmbit de la qualitat, seguidament en la gestió ambiental i en última instància en la prevenció de riscos laborals. Aquests tres tipus de sistemes de gestió, en els últims anys s’han anat integrant, de manera que s’han reduït els recursos i els esforços emprats en la gestió, millorant significativament l’eficàcia i l’eficiència d’aquests sistemes. L’objectiu principal que persegueix aquest projecte, és definir un sistema de gestió que permeti a l’empresa conduir les seves activitats de forma simplificada i ordenada, i que alhora faciliti la informació necessària per a corregir i millorar les activitats. Un altre objectiu que pretén aconseguir aquest projecte, és el de dissenyar un SGI que aprofiti les sinèrgies generades en els diferents àmbits de la pròpia empresa i fomenti les interaccions entre els diferents nivells de l’organització. En conseqüència, millorarà de forma important els fluxos d’informació dins de l’empresa minimitzant els esforços i la pèrdua d’informació. El mètode escollit per a la implantació del SGI, ha estat la Gestió per Processos, la qual es basa en la definició i seguiment dels processos de l’empresa, partint de les necessitats del client i acabant quan aquestes estan satisfetes. En conclusió, a la finalització del present projecte s’obtindrà un SGI, amb tots els processos de l’empresa definits i implantats, que doni compliment a les normes UNEEN-ISO 9001:00, UNE-EN-ISO 14001:04 i OHSAS 18001:07. Aquest SGI, que s’ha realitzat des d’un punt de vista documental i teòric, suposarà una millora de l’eficàcia operativa dels processos i una important millora competitiva de l’empresa.

Implantació d'un sistema de gestió integrada: ISO 9001:00, ISO 14001:04 i OHSAS 18001:07, en un centre d'estètica i perruqueria

En aquests últims anys, són moltes les empreses que han optat per la utilització de sistemes de gestió normalitzats, per a garantir la rendibilitat i fiabilitat dels resultats de la implantació del sistema de gestió en qüestió. A la dècada dels 90 va ser quan la implantació de sistemes de gestió va començar a ser important en la majoria de sectors econòmics. L’evolució en els sistemes de gestió a trets generals va iniciar-se primerament en l’àmbit de la qualitat, seguidament en la gestió ambiental i en última instància en la prevenció de riscos laborals. Aquests tres tipus de sistemes de gestió, en els últims anys s’han anat integrant, de manera que s’han reduït els recursos i els esforços emprats en la gestió, millorant significativament l’eficàcia i l’eficiència d’aquests sistemes. L’objectiu principal que persegueix aquest projecte, és definir un sistema de gestió que permeti a l’empresa conduir les seves activitats de forma simplificada i ordenada, i que alhora faciliti la informació necessària per a corregir i millorar les activitats. Un altre objectiu que pretén aconseguir aquest projecte, és el de dissenyar un SGI que aprofiti les sinèrgies generades en els diferents àmbits de la pròpia empresa i fomenti les interaccions entre els diferents nivells de l’organització. En conseqüència, millorarà de forma important els fluxos d’informació dins de l’empresa minimitzant els esforços i la pèrdua d’informació. El mètode escollit per a la implantació del SGI, ha estat la Gestió per Processos, la qual es basa en la definició i seguiment dels processos de l’empresa, partint de les necessitats del client i acabant quan aquestes estan satisfetes. En conclusió, a la finalització del present projecte s’obtindrà un SGI, amb tots els processos de l’empresa definits i implantats, que doni compliment a les normes UNEEN-ISO 9001:00, UNE-EN-ISO 14001:04 i OHSAS 18001:07. Aquest SGI, que s’ha realitzat des d’un punt de vista documental i teòric, suposarà una millora de l’eficàcia operativa dels processos i una important millora competitiva de l’empresa.

Spermiogenesis and spermatozoon ultrastructure of the bothriocephalidean cestode Clestobothrium crassiceps (Rudolphi, 1819), a parasite of the teleost fish Merluccius merluccius (Gadiformes: Merlucciidae)

Spermiogenesis and the ultrastructure of the spermatozoon of the bothriocephalidean cestode Clestobothrium crassiceps (Rudolphi, 1819), a parasite of the teleost fish Merluccius merluccius (Linnaeus, 1758), have been studied by means of transmission electron microscopy. Spermiogenesis involves firstly the formation of a differentiation zone. It is characterized by the presence of two centrioles associated with striated rootlets, an intercentriolar body and an electron-dense material in the apical region of this zone. Later, two flagella develop from the centrioles, growing orthogonally in relation to the median cytoplasmic process. Flagella then undergo a rotation of 90° until they become parallel to the median cytoplasmic process, followed by the proximodistal fusion of the flagella with the median cytoplasmic process. The nucleus elongates and afterwards it migrates along the spermatid body. Spermiogenesis finishes with the appearance of the apical cone surrounded by the single helical crested body at the base of the spermatid. Finally, the narrowing of the ring of arched membranes detaches the fully formed spermatozoon. The mature spermatozoon of C. crassiceps is filiform and contains two axonemes of the 9 + '1' trepaxonematan pattern, a parallel nucleus, parallel cortical microtubules, and electron-dense granules of glycogen. The anterior extremity of the gamete exhibits a short electron-dense apical cone and one crested body, which turns once around the sperm cell. The first axoneme is surrounded by a ring of thick cortical microtubules that persist until the appearance of the second axoneme. Later, these thick cortical microtubules disappear and thus, the mature spermatozoon exhibits two bundles of thin cortical microtubules. The posterior extremity of the male gamete presents only the nucleus. Results are discussed and compared particularly with the available ultrastructural data on the former 'pseudophyllideans'. Two differences can be established between spermatozoa of Bothriocephalidea and Diphyllobothriidea, the type of spermatozoon (II vs I) and the presence/absence of the ring of cortical microtubules.

Spermiogenesis and spermatozoon ultrastructure of the bothriocephalidean cestode Clestobothrium crassiceps (Rudolphi, 1819), a parasite of the teleost fish Merluccius merluccius (Gadiformes: Merlucciidae)

Spermiogenesis and the ultrastructure of the spermatozoon of the bothriocephalidean cestode Clestobothrium crassiceps (Rudolphi, 1819), a parasite of the teleost fish Merluccius merluccius (Linnaeus, 1758), have been studied by means of transmission electron microscopy. Spermiogenesis involves firstly the formation of a differentiation zone. It is characterized by the presence of two centrioles associated with striated rootlets, an intercentriolar body and an electron-dense material in the apical region of this zone. Later, two flagella develop from the centrioles, growing orthogonally in relation to the median cytoplasmic process. Flagella then undergo a rotation of 90° until they become parallel to the median cytoplasmic process, followed by the proximodistal fusion of the flagella with the median cytoplasmic process. The nucleus elongates and afterwards it migrates along the spermatid body. Spermiogenesis finishes with the appearance of the apical cone surrounded by the single helical crested body at the base of the spermatid. Finally, the narrowing of the ring of arched membranes detaches the fully formed spermatozoon. The mature spermatozoon of C. crassiceps is filiform and contains two axonemes of the 9 + '1' trepaxonematan pattern, a parallel nucleus, parallel cortical microtubules, and electron-dense granules of glycogen. The anterior extremity of the gamete exhibits a short electron-dense apical cone and one crested body, which turns once around the sperm cell. The first axoneme is surrounded by a ring of thick cortical microtubules that persist until the appearance of the second axoneme. Later, these thick cortical microtubules disappear and thus, the mature spermatozoon exhibits two bundles of thin cortical microtubules. The posterior extremity of the male gamete presents only the nucleus. Results are discussed and compared particularly with the available ultrastructural data on the former 'pseudophyllideans'. Two differences can be established between spermatozoa of Bothriocephalidea and Diphyllobothriidea, the type of spermatozoon (II vs I) and the presence/absence of the ring of cortical microtubules.

Applying precision feeding techniques in growing-finishing pig operations

The high cost of feed ingredients, the use of non-renewable sources of phosphate and the dramatic increase in the environmental load resulting from the excessive land application of manure are major challenges for the livestock industry. Precision feeding is proposed as an essential approach to improve the utilization of dietary nitrogen, phosphorus and other nutrients and thus reduce feeding costs and nutrient excretion. Precision feeding requires accurate knowledge of the nutritional value of feedstuffs and animal nutrient requirements, the formulation of diets in accordance with environmental constraints, and the gradual adjustment of the dietary nutrient supply to match the requirements of the animals. After the nutritional potential of feed ingredients has been precisely determined and has been improved by the addition of enzymes (e.g. phytases) or feed treatments, the addition of environmental objectives to the traditional feed formulation algorithms can promote the sustainability of the swine industry by reducing nutrient excretion in swine operations with small increases in feeding costs. Increasing the number of feeding phases can also contribute to significant reductions in nutrient excretion and feeding costs. However, the use of precision feeding techniques in which pigs are fed individually with daily tailored diets can further improve the efficiency with which pigs utilize dietary nutrients. Precision feeding involves the use of feeding techniques that allow the provision of the right amount of feed with the right composition at the right time to each pig in the herd. Using this approach, it has been estimated that feeding costs can be reduced by more than 4.6%, and nitrogen and phosphorus excretion can both be reduced by more than 38%. Moreover, the integration of precision feeding techniques into large-group production systems can provide real-time off-farm monitoring of feed and animals for optimal slaughter and production strategies, thus improving the environmental sustainability of pork production, animal well-being and meat-product quality.

Spermiogenesis and spermatozoon ultrastructure of the dilepidid cestode Molluscotaenia crassiscolex (von Linstow, 1890), an intestinal parasite of the common shrew Sorex araneus

Spermiogenesis in Molluscotaenia crassiscolex begins with the formation of a differentiation zone containing two centrioles. One of the centrioles develops a flagellum directly into the cytoplasmic extension. The nucleus elongates and later migrates along the spermatid body. During advanced stages of spermiogenesis, a periaxonemal sheath appears in the spermatid. Spermiogenesis finishes with the appearance of a single helicoidal crested body at the base of the spermatid and, finally, the narrowing of the ring of arched membranes causes the detachment of the fully formed spermatozoon. The mature spermatozoon of M. crassiscolex exhibits a partially detached crested body in the anterior region of the spermatozoon, one axoneme, twisted cortical microtubules, a periaxonemal sheath, and a spiralled nucleus. The anterior spermatozoon extremity is characterized by the presence of an electron-dense apical cone and a single spiralled crested body, which is attached to the sperm cell in the anterior and posterior areas of region I, whereas in the middle area it is partially detached from the cell. This crested body is described for the first time in cestodes. The posterior extremity of the male gamete exhibits only the disorganizing axoneme. Results are discussed and compared particularly with the available ultrastructural data on dilepidids sensu lato.