Expert supervision based on cases

The paper focuses on taking advantage of large amounts of data that are systematically stored in plants (by means of SCADA systems), but not exploited enough in order to achieve supervisory goals (fault detection, diagnosis and reconfiguration). The methodology of case base reasoning (CBR) is proposed to perform supervisory tasks in industrial processes by re-using the stored data. The goal is to take advantage of experiences, registered in a suitable structure as cam, avoiding the tedious task of knowledge acquisition and representation needed by other reasoning techniques as expert systems. An outlook of CBR terminology and basic concepts are presented. The adaptation of CBR in performing expert supervisory tasks, taking into account the particularities and difficulties derived from dynamic systems, is discussed. A special interest is focused in proposing a general case definition suitable for supervisory tasks. Finally, this structure and the whole methodology is tested in a application example for monitoring a real drier chamber

A Novel Breast Tissue Density Classification Methodology

It has been shown that the accuracy of mammographic abnormality detection methods is strongly dependent on the breast tissue characteristics, where a dense breast drastically reduces detection sensitivity. In addition, breast tissue density is widely accepted to be an important risk indicator for the development of breast cancer. Here, we describe the development of an automatic breast tissue classification methodology, which can be summarized in a number of distinct steps: 1) the segmentation of the breast area into fatty versus dense mammographic tissue; 2) the extraction of morphological and texture features from the segmented breast areas; and 3) the use of a Bayesian combination of a number of classifiers. The evaluation, based on a large number of cases from two different mammographic data sets, shows a strong correlation ( and 0.67 for the two data sets) between automatic and expert-based Breast Imaging Reporting and Data System mammographic density assessment

Programa pacient expert en obesitat

Objectiu general: desenvolupament del Programa Pacient Expert en obesitat. Objectius específics: es basaran amb el compliment de la dieta i l’activitat física, les mesures fisiològiques, la capacitat d’autogestió i el grau de satisfacció. Metodologia: - Àmbit d’estudi: Atenció Primària en Salut. - Disseny: estudi quantitatiu de tipus assaig clínic aleatoritzat. - Participants: adults amb obesitat. - Obtenció de dades: per l’anàlisi de variància per mesures repetides, l’anàlisi del discurs i l’observació estructurada. Limitacions de l’estudi: possible buit de dades per la pèrdua de participants o per la falta de continuïtat d’aquests.

The use of the SeDeM diagram expert system for the formulation of Captopril SR matrix tablets by direct compression

The SeDeM Diagram Expert System has been used to study excipients, Captopril and designed formulations for their galenic characterization and to ascertain the critical points of the formula affecting product quality to obtain suitable formulations of Captopril Direct Compression SR Matrix Tablets. The application of the Sedem Diagram Expert System enables selecting excipients with in order to optimize the formula in the preformulation and formulation studies. The methodology is based on the implementation of ICH Q8, establishing the design space of the formula with the use of experiment design, using the parameters of the SeDeM Diagram Expert System as system responses.

A Methodology to measure shareholder value orientation and shareholder value creation aimed at providing a research basis to investigate the link between both magnitudes

Does shareholder value orientation lead to shareholder value creation? This article proposes methods to quantify both, shareholder value orientation and shareholder value creation. Through the application of these models it is possible to quantify both dimensions and examine statistically in how far shareholder value orientation explains shareholder value creation. The scoring model developed in this paper allows quantifying the orientation of managers towards the objective to maximize wealth of shareholders. The method evaluates information that comes from the companies and scores the value orientation in a scale from 0 to 10 points. Analytically the variable value orientation is operationalized expressing it as the general attitude of managers toward the objective of value creation, investment policy and behavior, flexibility and further eight value drivers. The value creation model works with market data such as stock prices and dividend payments. Both methods where applied to a sample of 38 blue chip companies: 32 firms belonged to the share index IBEX 35 on July 1st, 1999, one company represents the “new economy” listed in the Spanish New Market as per July 1st, 2001, and 5 European multinational groups formed part of the EuroStoxx 50 index also on July 1st, 2001. The research period comprised the financial years 1998, 1999, and 2000. A regression analysis showed that between 15.9% and 23.4% of shareholder value creation can be explained by shareholder value orientation.

Applying RADIC in Open MPI: the methodology used to implement RADIC over a Message Passing Library

Fault tolerance has become a major issue for computer and software engineers because the occurrence of faults increases the cost of using a parallel computer. RADIC is the fault tolerance architecture for message passing systems which is transparent, decentralized, flexible and scalable. This master thesis presents the methodology used to implement the RADIC architecture over Open MPI, a well-know large-used message passing library. This implementation kept the RADIC architecture characteristics. In order to validate the implementation we have executed a synthetic ping program, besides, to evaluate the implementation performance we have used the NAS Parallel Benchmarks. The results prove that the RADIC architecture performance depends on the communication pattern of the parallel application which is running. Furthermore, our implementation proves that the RADIC architecture could be implemented over an existent message passing library.

Development of an optimized methodology for tensile testing of carbon steels in hydrogen environment

The study was performed at OCAS, the Steel Research Centre of ArcelorMittal for the Industry market. The major aim of this research was to obtain an optimized tensile testing methodology with in-situ H-charging to reveal the hydrogen embrittlement in various high strength steels. The second aim of this study has been the mechanical characterization of the hydrogen effect on hight strength carbon steels with varying microstructure, i.e. ferrite-martensite and ferrite-bainite grades. The optimal parameters for H-charging - which influence the tensile test results (sample geometry type of electrolyte, charging methods effect of steel type, etc.) - were defined and applied to Slow Strain Rate testing, Incremental Step Loading and Constant Load Testing. To better understand the initiation and propagation of cracks during tensile testing with in-situ H-charging, and to make the correlation with crystallographic orientation, some materials have been analyzed in the SEM in combination with the EBSD technique. The introduction of a notch on the tensile samples permits to reach a significantly improved reproducibility of the results. Comparing the various steel grades reveals that Dual Phase (ferrite-martensite) steels are more sensitive to hydrogen induced cracking than the FB (ferritic-bainitic) ones. This higher sensitivity to hydrogen was found back in the reduced failure times, increased creep rates and enhanced crack initiation (SEM) for the Dual Phase steels in comparison with the FB steels.

Grup de treball en el portafoli de l'estudiant (GTPoE)

El projecte del grup de treball en el portafoli d’aprenentatge de l'estudiant de la UPC (GtPoE) ha tingut una durada d'un any i s'ha realitzat a la Universitat Politècnica de Catalunya. Els objectius del projecte, que majoritàriament s’han assolit, han estat essencialment: (1) formació d'un grup d’interès per impulsar el portafoli i portafoli electrònic com a eines d'avaluació vàlides en el context nou de l'EEES, format per professors de la UPC i d’altres universitats que s’han volgut incorporar; (2) posta a punt i ús d’una plataforma intranet i web per a la coordinació del grup i exposició de materials; (3) realització de seminaris específics amb ponents expert en aquesta matèria per assolir les bases de la metodologia; (4) assaig per part de professors del grup de treball, d’experiències del portafoli de l’estudiant en assignatures tant obligatories com optatives en diversos centres de la UPC, i la introducció del portafoli de la carrera (o carpeta de competències) en l’EPSC; (5) adquirir documentació i referències bibliogràfiques sobre aquesta eina del portafoli i altres tècniques d’innovació docent; i (6), participar en congressos i jornades per explicar els resultats del projecte. Actualment, al final d’aquest projecte, el grup té 26 membres i la voluntat de continuar desenvolupant la tasca d’inserció del portafoli en els nous plans d’estudis. Així com també es treballa coordinadament amb els altres grups d’interès que s’han format al voltant de l’ICE de la UPC a l'entorn de la innovació docent, al mateix temps que es participa en les activitats que desenvolupa la RED E-Portfolio a nivell estatal amb objectius similars coordinada per professors de la UOC.

Reconsideration of dimensions and curve fitting practice in economics ellaborating on Georgescu-Roegen’s economic methodology

This paper is to examine the proper use of dimensions and curve fitting practices elaborating on Georgescu-Roegen’s economic methodology in relation to the three main concerns of his epistemological orientation. Section 2 introduces two critical issues in relation to dimensions and curve fitting practices in economics in view of Georgescu-Roegen’s economic methodology. Section 3 deals with the logarithmic function (ln z) and shows that z must be a dimensionless pure number, otherwise it is nonsensical. Several unfortunate examples of this analytical error are presented including macroeconomic data analysis conducted by a representative figure in this field. Section 4 deals with the standard Cobb-Douglas function. It is shown that the operational meaning cannot be obtained for capital or labor within the Cobb-Douglas function. Section 4 also deals with economists "curve fitting fetishism". Section 5 concludes thispaper with several epistemological issues in relation to dimensions and curve fitting practices in economics.

Consumer populations and nutritional transition in Spain in the 20th century: a methodology for their reconstruction

One feature of the modern nutrition transition is the growing consumption of animal proteins. The most common approach in the quantitative analysis of this change used to be the study of averages of food consumption. But this kind of analysis seems to be incomplete without the knowledge of the number of consumers. Data about consumers are not usually published in historical statistics. This article introduces a methodological approach for reconstructing consumer populations. This methodology is based on some assumptions about the diffusion process of foodstuffs and the modeling of consumption patterns with a log-normal distribution. This estimating process is illustrated with the specific case of milk consumption in Spain between 1925 and 1981. These results fit quite well with other data and indirect sources available showing that this dietary change was a slow and late process. The reconstruction of consumer population could shed a new light in the study of nutritional transitions.

An hybrid methodology for RL-based behavior coordination in a target following mission with an AUV

Proposes a behavior-based scheme for high-level control of autonomous underwater vehicles (AUVs). Two main characteristics can be highlighted in the control scheme. Behavior coordination is done through a hybrid methodology, which takes in advantages of the robustness and modularity in competitive approaches, as well as optimized trajectories

A system to evaluate the accuracy of a visual mosaicking methodology

When underwater vehicles navigate close to the ocean floor, computer vision techniques can be applied to obtain motion estimates. A complete system to create visual mosaics of the seabed is described in this paper. Unfortunately, the accuracy of the constructed mosaic is difficult to evaluate. The use of a laboratory setup to obtain an accurate error measurement is proposed. The system consists on a robot arm carrying a downward looking camera. A pattern formed by a white background and a matrix of black dots uniformly distributed along the surveyed scene is used to find the exact image registration parameters. When the robot executes a trajectory (simulating the motion of a submersible), an image sequence is acquired by the camera. The estimated motion computed from the encoders of the robot is refined by detecting, to subpixel accuracy, the black dots of the image sequence, and computing the 2D projective transform which relates two consecutive images. The pattern is then substituted by a poster of the sea floor and the trajectory is executed again, acquiring the image sequence used to test the accuracy of the mosaicking system

Comparison studies of tin deposits (Priamurye, Russia) using the Aitchison’s methodology

A study of tin deposits from Priamurye (Russia) is performed to analyze the differencesbetween them based on their origin and also on commercial criteria. A particularanalysis based on their vertical zonality is also given for samples from Solnechnoedeposit. All the statistical analysis are made on the subcomposition formed by seventrace elements in cassiterite (In, Sc, Be, W, Nb, Ti and V) using the Aitchison’methodology of analysis of compositional data

Interacting software-agents to support a kind of expert supervision systems

Expert supervision systems are software applications specially designed to automate process monitoring. The goal is to reduce the dependency on human operators to assure the correct operation of a process including faulty situations. Construction of this kind of application involves an important task of design and development in order to represent and to manipulate process data and behaviour at different degrees of abstraction for interfacing with data acquisition systems connected to the process. This is an open problem that becomes more complex with the number of variables, parameters and relations to account for the complexity of the process. Multiple specialised modules tuned to solve simpler tasks that operate under a co-ordination provide a solution. A modular architecture based on concepts of software agents, taking advantage of the integration of diverse knowledge-based techniques, is proposed for this purpose. The components (software agents, communication mechanisms and perception/action mechanisms) are based on ICa (Intelligent Control architecture), software middleware supporting the build-up of applications with software agent features

Modelling the Human Values Scale from Consumers Transactional Data Bases

The main objective of this paper aims at developing a methodology that takes into account the human factor extracted from the data base used by the recommender systems, and which allow to resolve the specific problems of prediction and recommendation. In this work, we propose to extract the user's human values scale from the data base of the users, to improve their suitability in open environments, such as the recommender systems. For this purpose, the methodology is applied with the data of the user after interacting with the system. The methodology is exemplified with a case study