Assessing the environmental impact of water consumption by energy crops grown in Spain

The environmental impact of the water consumption of four typical crop rotations grown in Spain, including energy crops, was analyzed and compared against Spanish agricultural and natural reference situations. The life cycle assessment (LCA) methodology was used for the assessment of the potential environmental impact of blue water (withdrawal from water bodies) and green water (uptake of soil moisture) consumption. The latter has so far been disregarded in LCA. To account for green water, two approaches have been applied: the first accounts for the difference in green water demand of the crops and a reference situation. The second is a green water scarcity index, which measures the fraction of the soil-water plant consumption to the available green water. Our results show that, if the aim is to minimize the environmental impacts of water consumption, the energy crop rotations assessed in this study were most suitable in basins in the northeast of Spain. In contrast, the energy crops grown in basins in the southeast of Spain were associated with the greatest environmental impacts. Further research into the integration of quantitative green water assessment in LCA is crucial in studies of systems with a high dependence on green water resources.

Life cycle analysis and life cyle impact assessment methodologies: a state of the art

Life cycle analysis (LCA) is a comprehensive method for assessing the environmental impact of a product or an activity over its entire life cycle. The purpose of conducting LCA studies varies from one application to another. Different applications use LCA for different purposes. In general, the main aim of using LCA is to reduce the environmental impact of products through guiding the decision making process towards more sustainable solutions. The most critical phase in an LCA study is the Life Cycle Impact Assessment (LCIA) where the life cycle inventory (LCI) results of the considered substances related to the study of a certain system are transformed into understandable impact categories that represent the impact on the environment. In this research work, a general structure clarifying the steps that shall be followed ir order to conduct an LCA study effectively is presented. These steps are based on the ISO 14040 standard framework. In addition, a survey is done on the most widely used LCIA methodologies. Recommendations about possible developments and suggetions for further research work regarding the use of LCA and LCIA methodologies are discussed as well.

A Comparison of the Environmental Impact of Different AOPs: Risk Indexes

Today, environmental impact associated with pollution treatment is a matter of great concern. A method is proposed for evaluating environmental risk associated with Advanced Oxidation Processes (AOPs) applied to wastewater treatment. The method is based on the type of pollution (wastewater, solids, air or soil) and on materials and energy consumption. An Environmental Risk Index (E), constructed from numerical criteria provided, is presented for environmental comparison of processes and/or operations. The Operation Environmental Risk Index (EOi) for each of the unit operations involved in the process and the Aspects Environmental Risk Index (EAj) for process conditions were also estimated. Relative indexes were calculated to evaluate the risk of each operation (E/NOP) or aspect (E/NAS) involved in the process, and the percentage of the maximum achievable for each operation and aspect was found. A practical application of the method is presented for two AOPs: photo-Fenton and heterogeneous photocatalysis with suspended TiO2 in Solarbox. The results report the environmental risks associated with each process, so that AOPs tested and the operations involved with them can be compared.

Low environmental impact bleaching sequences for attaining high brightness level with eucalyptus SPP pulp

The alternatives used for minimizing the usage of chlorine dioxide in bleaching sequences included a hot acid hydrolysis (Ahot) stage, the use of hot chlorine dioxide (Dhot) and ozone stages at medium consistency and high consistency (Zmc and Zhc), in addition to stages with atmospheric hydrogen peroxide (P) and pressurized hydrogen peroxide (PO). The results were interpreted based on the cost of the chemical products, bleaching process yields and on minimizing the environmental impact of the bleaching process. In spite of some process restrictions, high ISO brightness levels were kept around 90 % brightness. Additionally, the inclusion of stages like acid hydrolysis, pressurized peroxide and ozone in the bleaching sequences provided an increase in operating flexibility, aimed at reducing environmental impact (ECF Light). The Dhot(EOP)D(PO) sequence presented lower operating cost for ISO brightness above 92 %. However, this kind of sequence was not allowed for closing the wastewater circuit, even partially. For ISO brightness level around 91%, the AhotZhcDP sequence presented a lower operating cost than the others

Assessment of the water chemistry and the macroinvertebrate community changes produced during the creation of the new Llobregat river mouth (Barcelona, NE Spain)

In 1999, a set of coordinated projects and investments whose principal objective was to transform Barcelona into one of the main distribution points of southern Europe resulted in the relocation of the Llobregat River mouth. The mouth was relocated by draining the old river mouth and constructing a new one. The aim of this study was to characterise the physico-chemical properties and the aquatic macroinvertebrate communities of the new river mouth and to monitor the changes experienced by the estuarine environment during its creation. A sampling point was established in the river 1.8 km upstream from its connection with the new mouth, and two sampling points were established in the new mouth. Samples of water and macroinvertebrates were collected every two months from May 2004 to June 2005, covering the periods before (from May to September 2004) and after (from September 2004 to June 2005) the new mouth was connected to the river and the sea. During the period before its connection to the river and the sea, the new mouth was functionally similar to a lagoon, with clear waters, charophytes and a rich invertebrate community. After the connection was completed, seawater penetrated the river mouth and extended to the connection point with the river (approximately 3.9 km upstream). An increase in conductivity from 4-6 mS cm 1 to 24-30 mS cm 1 caused important changes in the macroinvertebrate community of the new mouth. An initial defaunation was followed by a colonisation of the new mouth by brackish-water and marine invertebrate species. Due to its design (which allows the penetration of the sea) and the decreased discharge from the lower part of the Llobregat River, the new mouth has become an arm of the sea

Avaluació del risc ambiental de productes farmacèutics en l'àmbit català

S’ha dut a terme una Avaluació del Risc Ambiental dels productes farmacèutics més consumits en l’àmbit català treballant sobre un model de planta de tractament d’aigües residuals determinat. La Concentració ambiental estimada (PEC) pel medi aquàtic s’ha calculat a partir de dades fisicoquímiques dels fàrmacs tenint en compte una sèrie d’hipòtesis i suposicions prèvies. La Concentració estimada de no-efecte (PNEC) s’ha estimat mitjançant dades d’ecotoxicitat extretes de l’ECOSAR. Es considera que hi ha afecció al medi quan la relació PEC/PNEC excedeix d’1; en aquest estudi s’ha obtingut que l’Ibuprofèn, el Diclofenac i l’Atorvastatina superen aquest valor suposant, per tant, un risc per al medi ambient. D’aquesta manera es mostra que l’eliminació dels fàrmacs durant el procés de la depuració de les aigües residuals no resulta totalment eficient.

Estudi preliminar per la creació d'una nova categoria d'impacte ambiental dins el marc de l'ACV: la dimensió natural del paisatge

L’Anàlisi de Cicle de Vida (ACV) és una eina emprada per gestionar els impactes ambientals i els recursos usats al llarg del cicle de vida d’un bé o servei. Existeixen reptes de futur en el desenvolupament de l’ACV, tals com la introducció de noves categories d’impacte ambiental, que permetin una anàlisi més específica dels impactes sobre determinats elements del medi, com ara el paisatge. En el present estudi s’analitza la dimensió natural del paisatge per tal de proposar la creació d’un índex de paisatge. Així doncs, s’han revisat les noves propostes de categories d’impacte en ACV que inclouen directament o indirecta el paisatge i s’ha analitzat una mostra de 33 estudis d’indicadors de paisatge. Aquesta cerca deriva en l’elecció de 6 indicadors: els usos del sòl, la diversitat paisatgística, la fragmentació, la connectivitat, la riquesa d’espècies i la densitat de carreteres. En la determinació dels seus respectius mètodes de càlcul s’ha detectat la importància de l’ús dels SIG, l’elecció d’una base de dades d’usos del sòl comuna (CORINE) i les interrelacions que existeixen entre indicadors. La proposta de l’índex hauria de poder ésser un punt de partida per a futurs estudis en aquest àmbit i derivar en una nova categoria d’impacte de paisatge, donat que caldrà estudiar alguns elements, com la interrelació entre indicadors.

Avaluació de l’ estat ambiental de la Riera d’Aubi i propostes de millora

Aquest projecte pretén desenvolupar una proposta d’índexs ambientals per a l’avaluació de l’estat ecològic de la riera de l’Aubi; avaluar l’estat ambiental, classificar els diferents trams, identificar els punts crítics i definir les propostes de millora ambiental per a la riera d’Aubi. La riera de l’ Aubi es troba entre els termes municipals de Mont-ras, Palafrugell i Palamós, a les comarques del Baix Empordà i Gironès