An energy efficient vertical handover decision algorithm

As wireless communications evolve towards heterogeneousnetworks, mobile terminals have been enabled tohandover seamlessly from one network to another. At the sametime, the continuous increase in the terminal power consumptionhas resulted in an ever-decreasing battery lifetime. To that end,the network selection is expected to play a key role on howto minimize the energy consumption, and thus to extend theterminal lifetime. Hitherto, terminals select the network thatprovides the highest received power. However, it has been provedthat this solution does not provide the highest energy efficiency.Thus, this paper proposes an energy efficient vertical handoveralgorithm that selects the most energy efficient network thatminimizes the uplink power consumption. The performance of theproposed algorithm is evaluated through extensive simulationsand it is shown to achieve high energy efficiency gains comparedto the conventional approach.

Consumer valuation of energy-saving features of residential air conditioners with hedonic and choice models

The promotion of energy-efficient appliances is necessary to reduce the energetic and environmental burden of the household sector. However, many studies have reported that a typical consumer underestimates the benefits of energy-saving investment on the purchase of household electric appliances. To analyze this energy-efficiency gap problem, many scholars have estimated implicit discount rates that consumers use for energy-consuming durables. Although both hedonic and choice models have been used in previous studies, a comparison between two models has not yet been done. This study uses point of sale data about Japanese residential air conditioners and estimates implicit discounts rates with both hedonic and choice models. Both models demonstrate that a typical consumer underinvests in energy efficiency. Although choice models estimate a lower implicit discount rate than hedonic models, the latter models estimate the values of other product characteristics more consistently than choice models.

Metal-Nitride-oxide-semiconductor light-emitting devices for general lighting.

The potential for application of silicon nitride-based light sources to general lighting is reported. The mechanism of current injection and transport in silicon nitride layers and silicon oxide tunnel layers is determined by electro-optical characterization of both bi- and tri-layers. It is shown that red luminescence is due to bipolar injection by direct tunneling, whereas Poole-Frenkel ionization is responsible for blue-green emission. The emission appears warm white to the eye, and the technology has potential for large-area lighting devices. A photometric study, including color rendering, color quality and luminous efficacy of radiation, measured under various AC excitation conditions, is given for a spectrum deemed promising for lighting. A correlated color temperature of 4800K was obtained using a 35% duty cycle of the AC excitation signal. Under these conditions, values for general color rendering index of 93 and luminous efficacy of radiation of 112 lm/W are demonstrated. This proof of concept demonstrates that mature silicon technology, which is extendable to lowcost, large-area lamps, can be used for general lighting purposes. Once the external quantum efficiency is improved to exceed 10%, this technique could be competitive with other energy-efficient solid-state lighting options. ©2011 Optical Society of America OCIS codes: (230.2090) Electro-optical devices; (150.2950) Illumination.

Efficient energy transfer from Si clusters to Er3+ in complex silicate glasses

We present an extensive study of the structural and optical emission properties in aluminum silicates and soda-lime silicates codoped with Si nanoclusters (Si-nc) and Er. Si excess of 5 and 15¿at.¿% and Er concentrations ranging from 2×1019 up to 6×1020¿cm¿3 were introduced by ion implantation. Thermal treatments at different temperatures were carried out before and after Er implantation. Structural characterization of the resulting structures was performed to obtain the layer composition and the size distribution of Si clusters. A comprehensive study has been carried out of the light emission as a function of the matrix characteristics, Si and Er contents, excitation wavelength, and power. Er emission at 1540¿nm has been detected in all coimplanted glasses, with similar intensities. We estimated lifetimes ranging from 2.5¿to¿12¿ms (depending on the Er dose and Si excess) and an effective excitation cross section of about 1×10¿17¿cm2 at low fluxes that decreases at high pump power. By quantifying the amount of Er ions excited through Si-nc we find a fraction of 10% of the total Er concentration. Upconversion coefficients of about 3×10¿18¿cm¿3¿s¿1 have been found for soda-lime glasses and one order of magnitude lower in aluminum silicates.

Selected configuration interaction with truncation energy error and application to the Ne atom

Selected configuration interaction (SCI) for atomic and molecular electronic structure calculations is reformulated in a general framework encompassing all CI methods. The linked cluster expansion is used as an intermediate device to approximate CI coefficients BK of disconnected configurations (those that can be expressed as products of combinations of singly and doubly excited ones) in terms of CI coefficients of lower-excited configurations where each K is a linear combination of configuration-state-functions (CSFs) over all degenerate elements of K. Disconnected configurations up to sextuply excited ones are selected by Brown's energy formula, ΔEK=(E-HKK)BK2/(1-BK2), with BK determined from coefficients of singly and doubly excited configurations. The truncation energy error from disconnected configurations, Δdis, is approximated by the sum of ΔEKS of all discarded Ks. The remaining (connected) configurations are selected by thresholds based on natural orbital concepts. Given a model CI space M, a usual upper bound ES is computed by CI in a selected space S, and EM=E S+ΔEdis+δE, where δE is a residual error which can be calculated by well-defined sensitivity analyses. An SCI calculation on Ne ground state featuring 1077 orbitals is presented. Convergence to within near spectroscopic accuracy (0.5 cm-1) is achieved in a model space M of 1.4× 109 CSFs (1.1 × 1012 determinants) containing up to quadruply excited CSFs. Accurate energy contributions of quintuples and sextuples in a model space of 6.5 × 1012 CSFs are obtained. The impact of SCI on various orbital methods is discussed. Since ΔEdis can readily be calculated for very large basis sets without the need of a CI calculation, it can be used to estimate the orbital basis incompleteness error. A method for precise and efficient evaluation of ES is taken up in a companion paper

The reform of the European Energy Tax Directive reform : effect on prices

[spa] Para hacer frente a los riesgos relacionados con la contaminación atmosférica, es ampliamente aceptada la necesidad de instrumentos de política encaminados a reducir las emisiones. La intervención tiene por objeto reducir las conductas contaminantes y incentivar una conducta más respetuosa y el uso de tecnologías más eficientes. La Unión Europea cuenta con dos importantes mecanismos económicos para el control de emisiones a escala europea: la directiva sobre los impuestos energéticos, un instrumento de fiscalidad ambiental aprobado en 2003 que afecta el precio de los productos energéticos, y el sistema de comercio de los derechos de emisiones, introducido en 2005, que afecta directamente a la cantidad de emisiones de CO2. En 2011, la Comisión Europea propuso una nueva versión de la directiva sobre los impuestos energéticos. El objetivo principal de la propuesta es aumentar la eficacia del instrumento a través de una mayor presión fiscal sobre los productos energéticos y de coordinar este instrumento de fiscalidad medioambiental con el sistema de comercio de los derechos de emisiones, para establecer una señal de precio de CO2 coherente para todos los sectores. Sin embargo, en mayo de 2012 el Parlamento Europeo bloqueó la propuesta de la nueva versión del impuesto, y el proceso de actualización se detuvo. La preocupación principal parecía ser el efecto de dicha propuesta en la competitividad, en particular para los sectores que serían los más afectados dado el uso intensivo de los productos energéticos, como el sector del transporte. El objetivo de este estudio es analizar el efecto que la reforma de la directiva sobre los impuestos energéticos podría tener sobre el nivel de precios, en particular en los países de la Unión Europea donde esta reforma implicaría un aumento de los impuestos energéticos. Utilizando datos del proyecto “World Input-Output Database”, la principal conclusión es que el nuevo sistema de impuestos energéticos tendría un impacto muy bajo sobre los precios. Por lo tanto, dado que los precios no serían fuertemente afectados por la reforma, no habrá inconvenientes para la competitividad y implicaciones en términos de distribución, pero, por otro lado, este resultado también implica una baja capacidad de esta reforma para provocar cambios en el consumo y la producción hacia menos presiones ambientales.

The reform of the European Energy Tax Directive reform : effect on prices

[spa] Para hacer frente a los riesgos relacionados con la contaminación atmosférica, es ampliamente aceptada la necesidad de instrumentos de política encaminados a reducir las emisiones. La intervención tiene por objeto reducir las conductas contaminantes y incentivar una conducta más respetuosa y el uso de tecnologías más eficientes. La Unión Europea cuenta con dos importantes mecanismos económicos para el control de emisiones a escala europea: la directiva sobre los impuestos energéticos, un instrumento de fiscalidad ambiental aprobado en 2003 que afecta el precio de los productos energéticos, y el sistema de comercio de los derechos de emisiones, introducido en 2005, que afecta directamente a la cantidad de emisiones de CO2. En 2011, la Comisión Europea propuso una nueva versión de la directiva sobre los impuestos energéticos. El objetivo principal de la propuesta es aumentar la eficacia del instrumento a través de una mayor presión fiscal sobre los productos energéticos y de coordinar este instrumento de fiscalidad medioambiental con el sistema de comercio de los derechos de emisiones, para establecer una señal de precio de CO2 coherente para todos los sectores. Sin embargo, en mayo de 2012 el Parlamento Europeo bloqueó la propuesta de la nueva versión del impuesto, y el proceso de actualización se detuvo. La preocupación principal parecía ser el efecto de dicha propuesta en la competitividad, en particular para los sectores que serían los más afectados dado el uso intensivo de los productos energéticos, como el sector del transporte. El objetivo de este estudio es analizar el efecto que la reforma de la directiva sobre los impuestos energéticos podría tener sobre el nivel de precios, en particular en los países de la Unión Europea donde esta reforma implicaría un aumento de los impuestos energéticos. Utilizando datos del proyecto “World Input-Output Database”, la principal conclusión es que el nuevo sistema de impuestos energéticos tendría un impacto muy bajo sobre los precios. Por lo tanto, dado que los precios no serían fuertemente afectados por la reforma, no habrá inconvenientes para la competitividad y implicaciones en términos de distribución, pero, por otro lado, este resultado también implica una baja capacidad de esta reforma para provocar cambios en el consumo y la producción hacia menos presiones ambientales.

Energy efficiency determinants: An empirical analysis of Spanish innovative firms

This paper examines the extent to which innovative Spanish firms pursue improvements in energy efficiency (EE) as an objective of innovation. The increase in energy consumption and its impact on greenhouse gas emissions justifies the greater attention being paid to energy efficiency and especially to industrial EE. The ability of manufacturing companies to innovate and improve their EE has a substantial influence on attaining objectives regarding climate change mitigation. Despite the effort to design more efficient energy policies, the EE determinants in manufacturing firms have been little studied in the empirical literature. From an exhaustive sample of Spanish manufacturing firms and using a logit model, we examine the energy efficiency determinants for those firms that have innovated. To carry out the econometric analysis, we use panel data from the Community Innovation Survey for the period 2008‐2011. Our empirical results underline the role of size among the characteristics of firms that facilitate energy efficiency innovation. Regarding company behaviour, firms that consider the reduction of environmental impacts to be an important objective of innovation and that have introduced organisational innovations are more likely to innovate with the objective of increasing energy efficiency. Keywords: energy efficiency, corporate targets, innovation, Community Innovation Survey. JEL Classification: Q40, Q55, O31