Tuberous sclerosis complex with oral manifestations: A case report and literature review

Introduction: Tuberous sclerosis complex (TSC) is a neurocutaneous syndrome produced by a number of genetic mutations. The disease is characterized by the development of benign tumors affecting different body systems. The most common oral manifestations of TSC are fibromas, gingival hyperplasia and enamel hypoplasia. Clinical Case: A 35-year-old woman diagnosed with TSC presented with a reactive fibroma of considerable size and rapid growth in the region of the right lower third molar. Discussion: In the present case the association of TSC with dental malpositioning gave rise to a rapidly evolving reactive fibroma of considerable diameter. Few similar cases can be found in the literature. Patients with TSC present mutations of the TSC1 and TSC2 genes, which intervene in cell cycle regulation and are important for avoiding neoplastic processes. No studies have been found associating TSC with an increased risk of oral cancer, though it has been shown that the over-expression of TSC2 could exert an antitumor effect. Careful oral and dental hygiene, together with regular visits to the dentist, are needed for the prevention and early detection of any type of oral lesion. The renal, pulmonary and cardiac alterations often seen in TSC must be taken into account for the correct management of these patients.

La cascarilla cerámica y su uso innovador

The ceramic shell is a material mainly used for making foundry molds. This research demonstrates that ceramic shell can be used for making sculptures with exceptional definition in its finish. The research has identified a number of advantages of the material to meet the challenges of an artist during the making of a sculpture. The research has been developed in six stages: In the first stage data were collected from the chaff as the process material. This was the starting point for research. In the second stage, we have set the appropriate composition of the slurry, both in percentage and type of binder, and firing curve. To this end, we evaluated the application characteristics, thickness, drying, mechanical strength, the reduction coefficient and porosity. In the third stage it was observed that the husk is suitable for all types of materials acting as support. It was also found that the slurry can be used with various sculptural processes: modeling, molding using silicone or plaster mold, shuttering, with internal metal frame, and so on. In addition, we have established methods to repair and modify the husk by hand and power tools. In the fourth stage we have found ways to modify the surface of the husk with other minerals that affect the structure: introduction of filing of copper, bronze and iron in the slurry ceramics, different staining procedure in hot or cold, by enamel slip, and so on. In the fifth stage sculptures were made using the methods established in the previous stages, to verify this hypothesis. The sixth stage, which is annexed, contains a new method to process the ceramic shell as a mold in casting that emerged from the proven methods in the investigation.

Bond strength of orthodontic brackets using different light and self-curing cements

The purpose of the study was to evaluate the shear bond strength of stainless steel orthodontic brackets directly bonded to extracted human premolar teeth. Fifty teeth were randomly divided into ¿ve groups: (1) System One (chemically cured composite resin), (2) Light Bond (light-cured composite resin), (3) Vivaglass Cem (self-curing glass ionomer cement), (4) Fuji Ortho LC (light-cured glass ionomer cement) used after 37% orthophosphoric acid¿etching of enamel (5) Fuji Ortho LC without orthophosphoric acid¿etching. The brackets were placed on the buccal and lingual surfaces of each tooth, and the specimens were stored in distilled water (24 hours) at 378C and thermocycled. Teeth were mounted on acrylic block frames, and brackets were debonded using an Instron machine. Shear bond strength values at fracture (Nw)were recorded. ANOVA and Student-Newman-Keuls multiple comparison tests were performed (P , .05). Bonding failure site was recorded by stereomicroscope and analyzed by Chi-square test, selected specimens of each group were observed by scanning electron microscope. System One attained the highest bond strength. Light Bond and Fuji Ortho LC, when using an acid-etching technique, obtained bond strengths that were within the range of estimated bond strength values for successful clinical bonding. Fuji Ortho LC and Vivaglass Cem left an almost clean enamel surface after debracketing.

Amelogénesis imperfecta hipocalcificada tipo IIIB: a propósito de una familia afectada

Este trabajo presenta tres casos de amelogénesis imperfecta hipocalcificada tipo IIIB en una misma familia, los cuales manifiestan una herencia autosómica recesiva.

Effect of water contamination on the shear bond strength of five orthodontic adhesives

Objectives: To evaluate the shear bond strength and site of failure of brackets bonded to dry and wet enamel. Study design: 50 teeth were divided into ten groups of 5 teeth each (10 surfaces). In half the groups enamel was kept dry before bonding, and in the other half distilled water was applied to wet the surface after etching. The following groups were established: 1)Acid/Transbond-XT (dry/wet) XT; 2) Transbond Plus Self Etching Primer (TSEP)/Transbond-XT paste (dry/wet); 3) Concise (dry), Transbond MIP/Concise (wet), 4) FujiOrtho-LC (dry/wet); 5) SmartBond (dry/wet). Brackets were bonded to both buccal and lingual surfaces. Specimens were stored in distilled water (24 hours at 37ºC) and thermocycled. Brackets were debonded using a Universal testing machine (cross-head speed 1 mm/min). Failure sites were classified using a stereomicroscope. Results: No significant differences in bond strength were detected between the adhesives under wet and dry conditions except for Smart- Bond, whose bond strength was significantly lower under dry conditions. For all the adhesives most bond failures were of mixed site location except for Smartbond, which failed at the adhesive-bracket interface. Conclusions: Under wet conditions the bonding capacity of the adhesives tested was similar than under dry conditions, with the exception of SmartBond which improved under wet conditions

Erupted odontomas: a report of three cases and review of the literature

Introduction: Odontomas are benign odontogenic tumors composed of enamel, dentine, cement and pulp tissue. They are usually clinically asymptomatic, but often associated with tooth eruption disturbances. In exceptional cases the odontoma erupts into the mouth. The present study reports three cases of odontomas erupted into the oral cavity and reviews the literature. Clinical cases: The first case was an 11-year-old girl with impacted 4.6 associated to a radiopaque mass measuring about 2 cm in diameter. The histological diagnosis was complex odontoma. A clinical and radiological follow-up of 4.6 was carried out until its spontaneous eruption. The second case was a 26-year-old male presenting a hard, yellowish-brown mass located distal to the upper left second molar. Computed tomography confi rmed the presence of a radiopaque lesion, and the histopathological study confirmed a complex odontoma. The third patient was a 27-year-old male reporting tongue irritation due to tooth eruption in the inferior lingual region. A periapical radiograph revealed a mixed radiopaque lesion associated to impacted 3.2. The histological report in this case indicated a compound odontoma. Discussion: Odontomas erupting into the oral cavity are rare. The first case was published in 1980, and since then only 17 cases have been reported in the literature. Eight of the 17 cases were complex odontomas; the rest were compound odontomas. Pain, swelling and infection were the most common symptoms, and 13 cases presented an impacted tooth associated with the lesion

Periodontal health and esthetic results in impacted teeth exposed by apically positioned flap technique

Objectives: This study evaluates the periodontal health status and the esthetic results of teeth subjected to orthodontic traction, after their exposure by an apically positioned flap. Study design: Fifteen patients were included in the study, ages between 11 and 28 years old. The fenestrated teeth and their homologous contralateral normally erupted teeth, used as control, were evaluated. Results: Statistically significant differences were found in the position of the gingival margin (p = 0.005), with an average distance between cemento-enamel junction (CEJ) and gingival margin of 2.47 mm (SD 1.19) in control teeth and of 1 mm (SD 1.31) in the operated teeth, and in the depth of palatal probing (p = 0.031), with 2.1 mm (SD 0.9) for the experimental teeth and 1.7 mm (SD 0.8) for the control teeth. The gingival index, the bleeding during probing and the probing depth did not show statistically significant differences. The patient"s subjective esthetic evaluation was more favorable for the control teeth in most of the cases. Conclusions: The surgical approach for the impacted teeth by means of the apically positioned flap resulted to be a predictable technique allowing the maintenance of the periodontal health on a long-term basis.

Further insights in trichothiodistrophy: a clinical, microscopic, and ultrastructural study of 20 cases and literature review

Background: Trichothiodistrophy (TTD) is a rare autosomal recessive condition that is characterized by a specific congenital hair shaft dysplasia caused by deficiency of sulfur associated with a wide spectrum of multisystem abnormalities. In this article, we study clinical, microscopic, and ultrastructural findings of 20 patients with TTD with the aim to add further insights regarding to this rare condition. Additionally, analyses of our results are compared with those extracted from the literature in order to enhance its comprehensibility. Materials and Methods: Twenty cases of TTD were included: 7 from Mexico and 14 from Spain. Clinical, microscopic, scanning electron microscopy (SEM) studies and X-ray microanalysis (XrMa) were carried out in all of them. Genetic studies were performed in all seven Mexican cases. Patients with xeroderma pigmentosum and xeroderma pigmentosum/TTD-complex were excluded. Results: Cuticular changes and longitudinal crests of the hair shaft were demonstrated. These crests were irregular, disorganized, following the hair longest axis. Hair shaft sulfur deficiency was disposed discontinuously and intermittently rather than uniformly. This severe decrease of sulfur contents was located close to the trichoschisis areas. Only five patients did not show related disturbances. Micro-dolichocephaly was observed in five cases and represented the most frequent facial dysmorphism found. It is also remarkable that all patients with urologic malformations also combined diverse neurologic disorders. Moreover, three Mexican sisters demonstrated the coexistence of scarce pubic vellus hair, developmental delay, onychodystrophy, and maxillar/mandibullar hypoplasia. Conclusions: TTD phenotype has greatly varied from very subtle forms to severe alterations such as neurologic abnormalities, blindness, lamellar ichthyosis and gonadal malformations. Herein, a multisystem study should be performed mandatorily in patients diagnosed with TTD.

Further insights in trichothiodistrophy: a clinical, microscopic, and ultrastructural study of 20 cases and literature review

Background: Trichothiodistrophy (TTD) is a rare autosomal recessive condition that is characterized by a specific congenital hair shaft dysplasia caused by deficiency of sulfur associated with a wide spectrum of multisystem abnormalities. In this article, we study clinical, microscopic, and ultrastructural findings of 20 patients with TTD with the aim to add further insights regarding to this rare condition. Additionally, analyses of our results are compared with those extracted from the literature in order to enhance its comprehensibility. Materials and Methods: Twenty cases of TTD were included: 7 from Mexico and 14 from Spain. Clinical, microscopic, scanning electron microscopy (SEM) studies and X-ray microanalysis (XrMa) were carried out in all of them. Genetic studies were performed in all seven Mexican cases. Patients with xeroderma pigmentosum and xeroderma pigmentosum/TTD-complex were excluded. Results: Cuticular changes and longitudinal crests of the hair shaft were demonstrated. These crests were irregular, disorganized, following the hair longest axis. Hair shaft sulfur deficiency was disposed discontinuously and intermittently rather than uniformly. This severe decrease of sulfur contents was located close to the trichoschisis areas. Only five patients did not show related disturbances. Micro-dolichocephaly was observed in five cases and represented the most frequent facial dysmorphism found. It is also remarkable that all patients with urologic malformations also combined diverse neurologic disorders. Moreover, three Mexican sisters demonstrated the coexistence of scarce pubic vellus hair, developmental delay, onychodystrophy, and maxillar/mandibullar hypoplasia. Conclusions: TTD phenotype has greatly varied from very subtle forms to severe alterations such as neurologic abnormalities, blindness, lamellar ichthyosis and gonadal malformations. Herein, a multisystem study should be performed mandatorily in patients diagnosed with TTD.

En torno al cardenal Don Gil Álvarez de Albornoz y el platero sienés Andrea Petrucci: el relicario de la mano de Santa Lucía y el cáliz de San Segundo

Este artículo trata de la complicada y hasta ahora inédita historia de la llegada a España de dos obras cumbres de la orfebrería sienesa del s. XIV en plata con esmaltes translúcidos: el relicario de la mano de Santa Lucía en la catedral de Toledo y el cáliz de San Segundo en la catedral de Ávila. La importación de estos dos importantísimos objetos devocionales y litúrgicos, ambos firmados por el platero sienés Andrea Petrucci, está relacionada con la estancia en Italia del cardenal don Gil de Albornoz, arzobispo de Toledo y posteriormente cardenal de San Clemente y Santa Sabina y legado papal. El mecenazgo del cardenal castellano y de su círculo en Italia explica la comisión y adquisición de estas piezas, cuyos accidentados itinerarios desembocarían finalmente en Toledo y en Ávila.