Testing a new multigroup inference approach to reconstructing past environmental conditions

A new, quantitative, inference model for environmental reconstruction (transfer function), based for the first time on the simultaneous analysis of multigroup species, has been developed. Quantitative reconstructions based on palaeoecological transfer functions provide a powerful tool for addressing questions of environmental change in a wide range of environments, from oceans to mountain lakes, and over a range of timescales, from decades to millions of years. Much progress has been made in the development of inferences based on multiple proxies but usually these have been considered separately, and the different numeric reconstructions compared and reconciled post-hoc. This paper presents a new method to combine information from multiple biological groups at the reconstruction stage. The aim of the multigroup work was to test the potential of the new approach to making improved inferences of past environmental change by improving upon current reconstruction methodologies. The taxonomic groups analysed include diatoms, chironomids and chrysophyte cysts. We test the new methodology using two cold-environment training-sets, namely mountain lakes from the Pyrenees and the Alps. The use of multiple groups, as opposed to single groupings, was only found to increase the reconstruction skill slightly, as measured by the root mean square error of prediction (leave-one-out cross-validation), in the case of alkalinity, dissolved inorganic carbon and altitude (a surrogate for air-temperature), but not for pH or dissolved CO2. Reasons why the improvement was less than might have been anticipated are discussed. These can include the different life-forms, environmental responses and reaction times of the groups under study.

Testing Cayley graph densities

We present a computer-assisted analysis of combinatorial properties of the Cayley graphs of certain finitely generated groups: Given a group with a finite set of generators, we study the density of the corresponding Cayley graph, that is, the least upper bound for the average vertex degree (= number of adjacent edges) of any finite subgraph. It is known that an m-generated group is amenable if and only if the density of the corresponding Cayley graph equals to 2m. We test amenable and non-amenable groups, and also groups for which amenability is unknown. In the latter class we focus on Richard Thompson’s group F.

Current Account imbalances, thriftiness and the real exchange rate in a growing economy

This paper analyses the theoretical relevance of the dynamical aspects of growth on the discussion about the observed positive correlation between per capita real income and real exchange rates. With this purpose, we develop a simple exogenous growth model where the internal, external and intertemporal equilibrium conditions of a typical macroeconomic model are imposed; this last one through the inclusion of a balanced growth path for the foreign assets accumulation. The main result under this consideration is that the relationship defended by the Balassa-Samuelson hypothesis is no more so straightforward. In our particular approach, the mentioned bilateral relationship depends on a parameter measuring thriftiness in the economy. Therefore, the probability of ending up with a positive relationship between growth and real exchange rates -as the classical economic theory predicts- will be higher when the economy is able to maintain a minimum saving ratio. Moreover, given that our model considers a simple Keynesian consumption function, some explosive paths can also be possible.

Testing the entrepreneurial intention model on a two-country sample

This paper tests the Entrepreneurial Intention Model -which is adapted from the Theory of Planned Behavior- on a sample of 533 individuals from two quite different countries: one of them European (Spain) and the other South Asian (Taiwan). A newly developed Entrepreneurial Intention Questionnaire (EIQ) has being used which tries to overcome some of the limitations of previous instruments. Structural equations techniques were used in the empirical analysis. Results are generally satisfactory, indicating that the model is probably adequate for studying entrepreneurship. Support for the model was found not only in the combined sample, but also in each of the national ones. However, some differences arose that may indicate demographic variables contribute differently to the formation of perceptions in each culture.

Testing of stair climbing point-of-choice prompts in Barcelona at an outdoor set of stairs and scalators on the Montjuïc site

Regular stair climbing has well-documented health dividends, such as increased fitness and strength, weight loss and reduced body fat, improved lipid profiles and reduced risk of osteoporosis. The general absence of barriers to participation makes stair climbing an ideal physical activity (PA) for health promotion. Studies in the US and the UK have consistently shown that interventions to increase the accumulation of lifestyle PA by climbing stairs rather than using the escalators are effective. However, there are no previous in Catalonia. This project tested one message for their ability to prompt travelers on the Montjuïc site to choose the stairs rather than the escalator when climbing up the Monjuïc hill. One standard message, " Take the stairs! 7 minutes of stair climbing a day protects your heart" provided a comparison with previous research done in the UK. Translated into Catalan and Spanish, it was presented on a poster positioned at the point of choice between the stairs and the escalator. The study used a quasi-experimental, interrupted time series design. Travelers, during several and specific hours on two days of the week, were coded for stair or escalator use, gender, age, ethnic status, presence of accompanying children or bags by one observer. Overall, the intervention resulted in a 81% increase in stair climbing. In the follow-up period without messages, stair climbing dropped out to baseline levels. This preliminary study showed a significant effect on stair use. However, caution is needed since results are based on a small sample and, only a low percentage of the sample took the stairs at baseline or the intervention phase . Future research on stair use in Catalonia should focus on using bigger samples, different sites (metro stations, airports, shopping centers, etc) , different messages and techniques to promote stair climbing.

Clean Development Mechanism and Sustainable Development: a discussion on the link between the CDM and Sustainable Development, an analysis of the current status of the CDM portfolio, and an multicriteria evaluation of the effects of additional incentives in order to foster broad local Sustainable Development dividends from the CDM projects

vegeu resum en el fitxer adjunt a l'inici del treball de recerca

Assessment of current anglo-saxon proposals about criminal justice and the justification of legal punishment: Moore, Duff and Finnis on retribution, and the challenging compatibility with the up-and-coming Restorative Justice

Pendent

MedIGS, un sistema segur basat en agents per al descobriment i obtenció de dades mèdiques distribuïdes: estudi i desenvolupament

En aquest projecte es desenvolupa en totes les seves fases(estudi, anàlisi, disseny, implementació i proves) l'aplicació MedIGS. MedIGS és una aplicació destinada a satisfer algunes de les necesitats actuals del sistema sanitari, la compartició d’informació i la màxima coordinació possible, utilitzant una tecnologia novedosa: els agents, i més concretament, els agents mòbils. Gràcies a aquesta tecnologia aconseguirem una integració segura de dades mèdiques distribuïdes. Està previst fer una prova pilot a Portugal, a partir dels resultats d’aquest projecte.

Testing for poverty dominance: an application to Canada

The paper proposes and applies statistical tests for poverty dominance that check for whether poverty comparisons can be made robustly over ranges of poverty lines and classes of poverty indices. This helps provide both normative and statistical confidence in establishing poverty rankings across distributions. The tests, which can take into account the complex sampling procedures that are typically used by statistical agencies to generate household-level surveys, are implemented using the Canadian Survey of Labour and Income Dynamics (SLID) for 1996, 1999 and 2002. Although the yearly cumulative distribution functions cross at the lower tails of the distributions, the more recent years tend to dominate earlier years for a relatively wide range of poverty lines. Failing to take into account SLID's sampling variability (as is sometimes done) can inflate significantly one's confidence in ranking poverty. Taking into account SLID's complex sampling design (as has not been done before) can also decrease substantially the range of poverty lines over which a poverty ranking can be inferred.

Testing low-altitude infrared digital photography from a mini-UAV to retrieve information for biological conservation

Satellite remote sensing imagery is used for forestry, conservation and environmental applications, but insufficient spatial resolution, and, in particular, unavailability of images at the precise timing required for a given application, often prevent achieving a fully operational stage. Airborne remote sensing has the advantage of custom-tuned sensors, resolution and timing, but its price prevents using it as a routine technique for the mentioned fields. Some Unmanned Aerial Vehicles might provide a “third way” solution as low-cost techniques for acquiring remotely sensed information, under close control of the end-user, albeit at the expense of lower quality instrumentation and instability. This report evaluates a light remote sensing system based on a remotely-controlled mini-UAV (ATMOS-3) equipped with a color infra-red camera (VEGCAM-1) designed and operated by CATUAV. We conducted a testing mission over a Mediterranean landscape dominated by an evergreen woodland of Aleppo pine (Pinus halepensis) and (Holm) oak (Quercus ilex) in the Montseny National Park (Catalonia, NE Spain). We took advantage of state-of-the-art ortho-rectified digital aerial imagery (acquired by the Institut Cartogràfic de Catalunya over the area during the previous year) and used it as quality reference. In particular, we paid attention to: 1) Operationality of flight and image acquisition according to a previously defined plan; 2) Radiometric and geometric quality of the images; and 3) Operational use of the images in the context of applications. We conclude that the system has achieved an operational stage regarding flight activities, although with meteorological limits set by wind speed and turbulence. Appropriate landing areas can be sometimes limiting also, but the system is able to land on small and relatively rough terrains such as patches of grassland or short matorral, and we have operated the UAV as far as 7 km from the control unit. Radiometric quality is sufficient for interactive analysis, but probably insufficient for automated processing. A forthcoming camera is supposed to greatly improve radiometric quality and consistency. Conventional GPS positioning through time synchronization provides coarse orientation of the images, with no roll information.

Automatització de tests per a una aplicació J2EE

Aquest projecte consisteix en la creació d’una eina que permeti automatitzar els tests que s’han de fer a una aplicació comercial j2ee, amb el propòsit de facilitar i estalviar feina a les persones encarregades de testejar aquesta aplicació, ajudant-les així en la seva tasca de cerca d’errors. Concretament, s’ha creat una aplicació construïda per capes, modulable i fàcilment ampliable, la qual arriba més enllà de l’automatització dels tests més habituals, permetent executar un conjunt de tests per tal de validar si la versió de l’aplicació a testejar és vàlida o no.

Aplicación para la gestión de un sistema de incidencias de un almacén robotizado

Aquest projecte té com objectiu fer un sistema d’incidències pel control d’un magatzem robotitzat i del cost que comporta la resolució d’aquestes. D’aquesta manera es pretén canviar un mètode de treball rudimentari, passant a un altre totalment estructurat que serveixi per millorar el actual. Per això s’ha creat una aplicació basada en la tecnologia JSF, què permet aconseguir els nostres objectius. L’aplicació inclou una base de dades feta en PostGres SQL on es guardarà tota la informació que s’utilitza en la nostra aplicació. En aquesta memòria s’ha volgut explicar quins han estat els diferents passos que es van donar per poder assolir tots els nostres objectius. En la primera part realitzem una introducció a la situació del problema que es vol solucionar i descriurem els objectius que en hem marcat. Seguidament s’analitzen els requeriments i es detalla com s’implementen les diferents parts de l’aplicació. Per acabar parlem sobre el procés de testing realitzat que ens assegura el correcte funcionament del programa. Resumint, el objectiu principal d’aquest projecte consisteix en crear una eina que a la vegada que facilita la feina dels treballadors del magatzem, serveixi per al control de tot el sistema de treball als directius de l’empresa.

Development of an optimized methodology for tensile testing of carbon steels in hydrogen environment

The study was performed at OCAS, the Steel Research Centre of ArcelorMittal for the Industry market. The major aim of this research was to obtain an optimized tensile testing methodology with in-situ H-charging to reveal the hydrogen embrittlement in various high strength steels. The second aim of this study has been the mechanical characterization of the hydrogen effect on hight strength carbon steels with varying microstructure, i.e. ferrite-martensite and ferrite-bainite grades. The optimal parameters for H-charging - which influence the tensile test results (sample geometry type of electrolyte, charging methods effect of steel type, etc.) - were defined and applied to Slow Strain Rate testing, Incremental Step Loading and Constant Load Testing. To better understand the initiation and propagation of cracks during tensile testing with in-situ H-charging, and to make the correlation with crystallographic orientation, some materials have been analyzed in the SEM in combination with the EBSD technique. The introduction of a notch on the tensile samples permits to reach a significantly improved reproducibility of the results. Comparing the various steel grades reveals that Dual Phase (ferrite-martensite) steels are more sensitive to hydrogen induced cracking than the FB (ferritic-bainitic) ones. This higher sensitivity to hydrogen was found back in the reduced failure times, increased creep rates and enhanced crack initiation (SEM) for the Dual Phase steels in comparison with the FB steels.

Testing, not modelling, the impact of cohesion support: a theoretical framework and some preliminary results for the Spanish regions

This paper develops a simple model that can be used to estimate the effectiveness of Cohesion expenditure relative to similar but unsubsidized projects, thereby making it possible to explicitly test an important assumption that is often implicit in estimates of the impact of Cohesion policies. Some preliminary results are reported for the case of infrastructure investment in the Spanish regions.