Forecasting the Earth"s radiation belts and modeling solar energetic particle events: Recent results from SPACECAST

High-energy charged particles in the van Allen radiation belts and in solar energetic particle events can damage satellites on orbit leading to malfunctions and loss of satellite service. Here we describe some recent results from the SPACECAST project on modelling and forecasting the radiation belts, and modelling solar energetic particle events. We describe the SPACECAST forecasting system that uses physical models that include wave-particle interactions to forecast the electron radiation belts up to 3 h ahead. We show that the forecasts were able to reproduce the >2 MeV electron flux at GOES 13 during the moderate storm of 7-8 October 2012, and the period following a fast solar wind stream on 25-26 October 2012 to within a factor of 5 or so. At lower energies of 10- a few 100 keV we show that the electron flux at geostationary orbit depends sensitively on the high-energy tail of the source distribution near 10 RE on the nightside of the Earth, and that the source is best represented by a kappa distribution. We present a new model of whistler mode chorus determined from multiple satellite measurements which shows that the effects of wave-particle interactions beyond geostationary orbit are likely to be very significant. We also present radial diffusion coefficients calculated from satellite data at geostationary orbit which vary with Kp by over four orders of magnitude. We describe a new automated method to determine the position at the shock that is magnetically connected to the Earth for modelling solar energetic particle events and which takes into account entropy, and predict the form of the mean free path in the foreshock, and particle injection efficiency at the shock from analytical theory which can be tested in simulations.

Forecasting the Earth"s radiation belts and modeling solar energetic particle events: Recent results from SPACECAST

High-energy charged particles in the van Allen radiation belts and in solar energetic particle events can damage satellites on orbit leading to malfunctions and loss of satellite service. Here we describe some recent results from the SPACECAST project on modelling and forecasting the radiation belts, and modelling solar energetic particle events. We describe the SPACECAST forecasting system that uses physical models that include wave-particle interactions to forecast the electron radiation belts up to 3 h ahead. We show that the forecasts were able to reproduce the >2 MeV electron flux at GOES 13 during the moderate storm of 7-8 October 2012, and the period following a fast solar wind stream on 25-26 October 2012 to within a factor of 5 or so. At lower energies of 10- a few 100 keV we show that the electron flux at geostationary orbit depends sensitively on the high-energy tail of the source distribution near 10 RE on the nightside of the Earth, and that the source is best represented by a kappa distribution. We present a new model of whistler mode chorus determined from multiple satellite measurements which shows that the effects of wave-particle interactions beyond geostationary orbit are likely to be very significant. We also present radial diffusion coefficients calculated from satellite data at geostationary orbit which vary with Kp by over four orders of magnitude. We describe a new automated method to determine the position at the shock that is magnetically connected to the Earth for modelling solar energetic particle events and which takes into account entropy, and predict the form of the mean free path in the foreshock, and particle injection efficiency at the shock from analytical theory which can be tested in simulations.

Interfaz de usuario de un sistema multi-robot de reconocimiento de superficies con Google Earth

Els sistemes multi-robot de reconeixement de superfícies es poden utilitzar tant per a l'exploració de llocs remots, de difícil accés o perillosos. Normalment, els robots no són autònoms, depenen d'operadors humans per dirigir-los. La informació que capten ha de ser processada i mostrada a l'usuari o usuària del sistema de forma intel·ligible. Un exemple d'aplicació seria el d'un sistema multirobot format per diversos helicòpters no tripulats que proporciona informació d'una àrea que ha patit algun desastre. El sistema informàtic recolliria la informació i la transmetria al coordinador de l'operatiu d'assistència de l'emergència. La idea del projecte és la de combinar la informació proporcionada pel sistema multi-robot amb la de la zona disponible a Google Earth i fer d'aquesta eina l'interfície d'usuari de l'aplicació.

Sistema de navegació geogràfica de tipus Google Earth per a entorns dinàmics

L’objectiu principal és avaluar un sistema que hagués de mostrar les imatges captades per una càmera que està filmant un entorn canviant sobre l’aplicació Google Earth. Es tractaria d’estudiar com es podria aprofitar aquesta aplicació i analitzar el rendiment que obtenim utilitzant-la per a navegar per un entorn dinàmic. S’hauria d’avaluar si és possible arribar a visualitzar l’entorn a una freqüència de 25 frames per segon.

Implementació en Geomedia PRO d'un exportador a KML per visualitzar dades 4D en Google Earth

Treball consistent en la construcció d'un exportador a format KML de mapes temàtics pel producte Geomedia PRO 6.1 possibilitant l'observació del component del temps sobre un globus virtual com és Google Earth. Mitjançant les dades de la xarxa XEMEC, es mostrarà un mapa temàtic d'exemple amb les dades d'intensitat i direcció del vent recollides en un període d'un any.

Porting and performance analysis of EC-Earth System on the BSC-MareNostrum Supercomputer

Earth System Models (ESM) have been successfuly developed over past few years, and are currently beeing used for simulating present day-climate, seasonal to interanual predictions of climate change. The supercomputer performance plays an important role in climate modeling since one of the challenging issues for climate modellers is to efficiently and accurately couple earth System components on present day computers architectures. At the Barcelona Supercomputing Center (BSC), we work with the EC- Earth System Model. The EC- Earth is an ESM, which currently consists of an atmosphere (IFS) and an ocean (NEMO) model that communicate with each other through the OASIS coupler. Additional modules (e.g. for chemistry and vegetation ) are under development. The EC-Earth ESM has been ported successfully over diferent high performance computin platforms (e.g, IBM P6 AIX, CRAY XT-5, Intelbased Linux Clusters, SGI Altix) at diferent sites in Europ (e.g., KNMI, ICHEC, ECMWF). The objective of the first phase of the project was to identify and document the issues related with the portability and performance of EC-Earth on the MareNostrum supercomputer, a System based on IBM PowerPC 970MP processors and run under a Linux Suse Distribution. EC-Earth was successfully ported to MareNostrum, and a compilation incompatibilty was solved by a two step compilation approach using XLF version 10.1 and 12.1 compilers. In addition, the EC-Earth performance was analyzed with respect to escalability and trace analysis with the Paravear software. This analysis showed that EC-Earth with a larger number of IFS CPUs (<128) is not feasible at the moment since some issues exists with the IFS-NEMO balance and MPI Communications.

Resistance to reform: Reconsidering the role of individual-specific uncertainty

Individual-specific uncertainty may increase the chances of reform beingenacted and sustained. Reform may be more likely to be enacted because amajority of agents might end up losing little from reform and a minoritygaining a lot. Under certainty, reform would therefore be rejected, butit may be enacted with uncertainty because those who end up losing believethat they might be among the winners. Reform may be more likely to besustained because, in a realistic setting, reform will increase theincentives of agents to move into those economic activities that benefit.Agents who respond to these incentives will vote to sustain reform infuture elections, even if they would have rejected reform under certainty.These points are made using the trade-model of Fernandez and Rodrik (AER,1991).

Earth's Changing Land

Entre el 14 i el 18 de març de 1998 es va celebrar a Barcelona la conferència Earth’s Changing Land sota la tutela dels programes internacionals Global Change in Terrestrial Ecosystems (GCTE) i Land Use and Land Cover Change (LUCC). L’objectiu principal de la trobada era presentar les darreres aportacions científiques sobre els efectes presents i previsibles del canvi global sobre els ecosistemes terrestres i la societat. Al mateix temps, es volia afavorir l’establiment de ponts de diàleg entre els professionals implicats en el canvi global

Morfogènesi de pilars de terra (earth Pillars, hoodoos). Exemples de la Riera de Gaià (Vallès Occidental, Barcelona) i del Bernal de Yátor (Las Alpujarras, Granada)

The origin and the primary features of the erosive earth pillar-like formations that develop in the Riera de Gaià (Barcelona) and in the Bernal de Yátor (Granada) are described. They are dynamic formations typical of areas subjected to strong water erosion

Aprovechamiento educativo y turístico de formas erosivas tipo pilares de tierra (earth pillars, hoodoos) : ejemplos de la riera de Gaià (Vallès occidental, Barcelona) y del Bernal de Yátor (la Alpujarra, Granada)

Se describen los principales rasgos geomorfológicos de las formas erosivas de tipo pilares de tierra que se desarrollan en la Riera de Gaià (Barcelona) y en el Bernal de Yátor (Granada) Se trata de formas dinámicas, propias de zonas sometidas a una fuerte erosión hídrica, con un elevado interés científico, estético y didáctico

Optimum Redundant Array Configurations for Earth Observation Aperture Synthesis Microwave Radiometers

Two-dimensional aperture synthesis radiometry is the technologyselected for ESA's SMOS mission to provide high resolution L-bandradiometric imagery. The array topology is a Y-shaped structure. Theposition and number of redundant elements to minimise instrumentdegradation in case of element failure(s) are studied.

Niobium and rare earth minerals from the Virulundo carbonatite, Namibe, Angola

The Virulundo carbonatite in Angola, one of the biggest in the world, contains pyrochlore as an accessory mineral in all of the carbonatite units (calciocarbonatites, ferrocarbonatites, carbonatite breccias, trachytoids). The composition of the primary pyrochlore crystals is very close to fluornatrocalciopyrochlore in all these units. High-temperature hydrothermal processes caused the pseudomorphic replacement of the above crystals by a second generation of pyrochlore, characterized by lower F and Na contents. Low-temperature hydrothermal replacement of the above pyrochlores, associated with production of quartz-carbonates-fluorite veins, controled the development of a third generation of pyrochlore, characterized by high Sr contents. Finally, supergene processes produced the development of a secondary paragenesis in the carbonatite, consisting in late carbonates, goethite, hollandite and REE minerals (mainly synchysite-(Ce), britholite-(Ce), britholite-(La), cerite-(Ce)). Separation of Ce from the other REE was allowed by oxidizing conditions. Therefore, Ce4+ was also incorporated into a late generation of pyrochlore, which is also strongly enriched in Ba and strongly depleted in Ca and Na

A reusable smart interface for gas sensor resistance measurement

The advances of the semiconductor industry enable microelectromechanical systems sensors, signal conditioning logic and network access to be integrated into a smart sensor node. In this framework, a mixed-mode interface circuit for monolithically integrated gas sensor arrays was developed with high-level design techniques. This interface system includes analog electronics for inspection of up to four sensor arrays and digital logic for smart control and data communication. Although different design methodologies were used in the conception of the complete circuit, high-level synthesis tools and methodologies were crucial in speeding up the whole design cycle, enhancing reusability for future applications and producing a flexible and robust component.