The internal wave field in Sau reservoir : Observation and modeling of a third vertical mode

Water withdrawal from Mediterranean reservoirs in summer is usually very high. Because of this, stratification is often continuous and far from the typical two-layered structure, favoring the excitation of higher vertical modes. The analysis of wind, temperature, and current data from Sau reservoir (Spain) shows that the third vertical mode of the internal seiche (baroclinic mode) dominated the internal wave field at the beginning of September 2003. We used a continuous stratification two-dimensional model to calculate the period and velocity distribution of the various modes of the internal seiche, and we calculated that the period of the third vertical mode is ;24 h, which coincides with the period of the dominating winds. As a result of the resonance between the third mode and the wind, the other oscillation modes were not excited during this period

Oil price shocks and labor market fluctuations

We examine the impact of real oil price shocks on labor market flows in the U.S. We first use smooth transition regression (STR) models to investigate to what extent oil prices can be considered as a driving force of labor market fluctuations. Then we develop and calibrate a modified version of Pissarides' (2000) model with energy costs, which we simulate in response to shocks mimicking the behavior of the actual oil price shocks. We find that (i) these shocks are an important driving force of job market flows; (ii) the job finding probability is the main transmission mechanism of such shocks; and (iii) they bring a new amplification mechanism for the volatility and should thus be seen as complementary of labor productivity shocks. Overall we conclude that shocks in oil prices cannot be neglected in explaining cyclical labor adjustments in the U.S.

Mathematical modeling and analysis of the interaction of populations of bacteria and bacteriophages within chicken intestine

Vegeu el resum a l'inici del document de l'arxiu adjunt

Projectes de modelatge i simulació avançada de sistemes mitjançant l'entorn ARENA

RESUM En l’exercici de les funcions típiques de qualsevol activitat humana, l’home ha de prendre decisions d’un o altre tipus permanentment i aquesta situació porta afegit, per lo general risc i incertesa, el que compromet la qualitat i l’èxit de la decisió. Per ajudar i contrarestar aquesta situació, l’home ha desenvolupat a través del temps una diversitat d’eines que li permeten minimitzar el risc i la incertesa en la presa de decisions. La simulació és una d’aquestes eines. Mitjançant la seva aplicació no només s’aconsegueix la comesa anterior, sinó que també es minimitzen els costos involucrats en la decisió mitjançant un millor ús dels recursos, la disminució del temps emprat per a la seva realització i la minimització de les probabilitats de risc. Aquest projecte representa la continuació d’un primer estudi introductori de la simulació anomenat: Estudi i guia docent per a modelatge i simulació de sistemes mitjançant l’entorn ARENA [9]. Realitzat per l’alumna d’Enginyeria en Organització Industrial de la Universitat de Vic, Montse Carbonell Crosas, l’any 2008 i sota la codirecció del director d’aquest segon projecte, el professor Juli Ordeix Rigo. Aquest nou projecte s’inicia amb una primera part teòrica, continguda dins del primer volum, la qual reforça els conceptes teòrics referents a la simulació amb ARENA, ja vistos en l’anterior projecte. Complementant aquells considerats bàsics i els de més utilitat i finalitza introduint nous conceptes avançats. Els nous capítols de temàtica avançada, junt als primers més bàsics de la primera part són exercitats dins de la segona, formant el segon volum d’aquest projecte. El mateix requereix la participació activa de l’alumne, per tal de realitzar cadascun dels 89 exercicis pràctics que es plantegen i poder onsolidar l’aprenentatge teòric d’aquesta eina avançada de simulació fent consultes als apartats teòrics recomanats dins de cada exercici. La complexitat dels exercicis anirà augmentant gradualment i s’insisteix en seguir la metodologia presentada en el projecte per a realitzar-los tots de forma ordenada i ascendent. L’ alumne quan acabi la part pràctica, haurà consolidat tota la part teòrica i serà capaç d’exercir com analista per tal de generar els seus propis projecte de simulació.

Projectes de modelatge i simulació avançada de sistemes mitjançant l'entorn ARENA

En l’exercici de les funcions típiques de qualsevol activitat humana, l’home ha de prendre decisions d’un o altre tipus permanentment i aquesta situació porta afegit, per lo general risc i incertesa, el que compromet la qualitat i l’èxit de la decisió. Per ajudar i contrarestar aquesta situació, l’home ha desenvolupat a través del temps una diversitat d’eines que li permeten minimitzar el risc i la incertesa en la presa de decisions. La simulació és una d’aquestes eines. Mitjançant la seva aplicació no només s’aconsegueix la comesa anterior, sinó que també es minimitzen els costos involucrats en la decisió mitjançant un millor ús dels recursos, la disminució del temps emprat per a la seva realització i la minimització de les probabilitats de risc. Aquest projecte representa la continuació d’un primer estudi introductori de la simulació anomenat: Estudi i guia docent per a modelatge i simulació de sistemes mitjançant l’entorn ARENA [9]. Realitzat per l’alumna d’Enginyeria en Organització Industrial de la Universitat de Vic, Montse Carbonell Crosas, l’any 2008 i sota la codirecció del director d’aquest segon projecte, el professor Juli Ordeix Rigo. Aquest nou projecte s’inicia amb una primera part teòrica, continguda dins del primer volum, la qual reforça els conceptes teòrics referents a la simulació amb ARENA, ja vistos en l’anterior projecte. Complementant aquells considerats bàsics i els de més utilitat i finalitza introduint nous conceptes avançats. Els nous capítols de temàtica avançada, junt als primers més bàsics de la primera part són exercitats dins de la segona, formant el segon volum d’aquest projecte. El mateix requereix la participació activa de l’alumne, per tal de realitzar cadascun dels 89 exercicis pràctics que es plantegen i poder onsolidar l’aprenentatge teòric d’aquesta eina avançada de simulació fent consultes als apartats teòrics recomanats dins de cada exercici. La complexitat dels exercicis anirà augmentant gradualment i s’insisteix en seguir la metodologia presentada en el projecte per a realitzar-los tots de forma ordenada i ascendent. L’ alumne quan acabi la part pràctica, haurà consolidat tota la part teòrica i serà capaç d’exercir com analista per tal de generar els seus propis projecte de simulació.

Experimental Modeling and Control Strategies on an Open Mobile Robot Platform PRIM

This research work deals with the problem of modeling and design of low level speed controller for the mobile robot PRIM. The main objective is to develop an effective educational tool. On one hand, the interests in using the open mobile platform PRIM consist in integrating several highly related subjects to the automatic control theory in an educational context, by embracing the subjects of communications, signal processing, sensor fusion and hardware design, amongst others. On the other hand, the idea is to implement useful navigation strategies such that the robot can be served as a mobile multimedia information point. It is in this context, when navigation strategies are oriented to goal achievement, that a local model predictive control is attained. Hence, such studies are presented as a very interesting control strategy in order to develop the future capabilities of the system

Thermal modeling and management in ultrathin chip stack technology

This paper presents a thermal modeling for power management of a new three-dimensional (3-D) thinned dies stacking process. Besides the high concentration of power dissipating sources, which is the direct consequence of the very interesting integration efficiency increase, this new ultra-compact packaging technology can suffer of the poor thermal conductivity (about 700 times smaller than silicon one) of the benzocyclobutene (BCB) used as both adhesive and planarization layers in each level of the stack. Thermal simulation was conducted using three-dimensional (3-D) FEM tool to analyze the specific behaviors in such stacked structure and to optimize the design rules. This study first describes the heat transfer limitation through the vertical path by examining particularly the case of the high dissipating sources under small area. First results of characterization in transient regime by means of dedicated test device mounted in single level structure are presented. For the design optimization, the thermal draining capabilities of a copper grid or full copper plate embedded in the intermediate layer of stacked structure are evaluated as a function of the technological parameters and the physical properties. It is shown an interest for the transverse heat extraction under the buffer devices dissipating most the power and generally localized in the peripheral zone, and for the temperature uniformization, by heat spreading mechanism, in the localized regions where the attachment of the thin die is altered. Finally, all conclusions of this analysis are used for the quantitative projections of the thermal performance of a first demonstrator based on a three-levels stacking structure for space application.

Properties of nitrogen doped silicon films deposited by low-pressure chemical vapor deposition from silane and ammonia

Nitrogen doped silicon (NIDOS) films have been deposited by low-pressure chemical vapor deposition from silane SiH4 and ammonia NH3 at high temperature (750°C) and the influences of the NH3/SiH4 gas ratio on the films deposition rate, refractive index, stoichiometry, microstructure, electrical conductivity, and thermomechanical stress are studied. The chemical species derived from silylene SiH2 into the gaseous phase are shown to be responsible for the deposition of NIDOS and/or (silicon rich) silicon nitride. The competition between these two deposition phenomena leads finally to very high deposition rates (100 nm/min) for low NH3/SiH4 gas ratio (R¿0.1). Moreover, complex variations of NIDOS film properties are evidenced and related to the dual behavior of the nitrogen atom into silicon, either n-type substitutional impurity or insulative intersticial impurity, according to the Si¿N atomic bound. Finally, the use of NIDOS deposition for the realization of microelectromechanical systems is investigated.

Effect of olive oil on early and late events of colon carcinogenesis in rats: modulation of arachidonic acid metabolism and local prostaglandin E2 synthesis.

BACKGROUND Animal model studies have shown that the colon tumour promoting effect of dietary fat depends not only on the amount but on its fatty acid composition. With respect to this, the effect of n9 fatty acids, present in olive oil, on colon carcinogenesis has been scarcely investigated. AIMS To assess the effect of an n9 fat diet on precancer events, carcinoma development, and changes in mucosal fatty acid composition and prostaglandin (PG)E2 formation in male Sprague-Dawley rats with azoxymethane induced colon cancer. METHODS Rats were divided into three groups to receive isocaloric diets (5% of the energy as fat) rich in n9, n3, or n6 fat, and were administered azoxymethane subcutaneously once a week for 11 weeks at a dose rate of 7.4 mg/kg body weight. Vehicle treated groups received an equal volume of normal saline. Groups of animals were colectomised at weeks 12 and 19 after the first dose of azoxymethane or saline. Mucosal fatty acids were assessed at 12 and 19 weeks. Aberrant crypt foci and the in vivo intracolonic release of PGE2 were assessed at week 12, and tumour formation at week 19. RESULTS Rats on the n6 diet were found to have colonic aberrant crypt foci and adenocarcinomas more often than those consuming either the n9 or n3 diet. There were no differences between the rats on the n9 and n3 diets. On the other hand, administration of both n9 and n3 diets was associated with a decrease in mucosal arachidonate concentrations as compared with the n6 diet. Carcinogen treatment induced an appreciable increase in PGE2 formation in rats fed the n6 diet, but not in those fed the n3 and n9 diets. CONCLUSIONS Dietary olive oil prevented the development of aberrant crypt foci and colon carcinomas in rats, suggesting that olive oil may have chemopreventive activity against colon carcinogenesis. These effects may be partly due to modulation of arachidonic acid metabolism and local PGE2synthesis.

Mobile robot experimental modeling and control strategies using sensor fusion

This research work deals with the problem of modeling and design of low level speed controller for the mobile robot PRIM. The main objective is to develop an effective educational, and research tool. On one hand, the interests in using the open mobile platform PRIM consist in integrating several highly related subjects to the automatic control theory in an educational context, by embracing the subjects of communications, signal processing, sensor fusion and hardware design, amongst others. On the other hand, the idea is to implement useful navigation strategies such that the robot can be served as a mobile multimedia information point. It is in this context, when navigation strategies are oriented to goal achievement, that a local model predictive control is attained. Hence, such studies are presented as a very interesting control strategy in order to develop the future capabilities of the system. In this context the research developed includes the visual information as a meaningful source that allows detecting the obstacle position coordinates as well as planning the free obstacle trajectory that should be reached by the robot

Modeling and control of electromechanical systems

The material presented in the these notes covers the sessions Modelling of electromechanical systems, Passive control theory I and Passive control theory II of the II EURON/GEOPLEX Summer School on Modelling and Control of Complex Dynamical Systems.We start with a general description of what an electromechanical system is from a network modelling point of view. Next, a general formulation in terms of PHDS is introduced, and some of the previous electromechanical systems are rewritten in this formalism. Power converters, which are variable structure systems (VSS), can also be given a PHDS form.We conclude the modelling part of these lectures with a rather complex example, showing the interconnection of subsystems from several domains, namely an arrangement to temporally store the surplus energy in a section of a metropolitan transportation system based on dc motor vehicles, using either arrays of supercapacitors or an electric poweredflywheel. The second part of the lectures addresses control of PHD systems. We first present the idea of control as power connection of a plant and a controller. Next we discuss how to circumvent this obstacle and present the basic ideas of Interconnection and Damping Assignment (IDA) passivity-based control of PHD systems.

Effect of feed fat by-products with trans fatty acids and heated oil on cholesterol and oxycholesterols in chicken

Chicken is the most widely consumed meat all over the world due to chickens being easy to rear, their fast growth rate and the meat having good nutritional characteristics. The main objective of this paper was to study the effects of dietary fatty by-products in low, medium and high levels of oxidized lipids and trans fatty acids (TFAs) on the contents of cholesterol and oxycholesterols in meat, liver, and plasma of chickens. A palm fatty acid distillate, before and after hydrogenation, and a sunflower-olive oil blend (70/30, v/v) before and after use in a commercial frying process were used in feeding trials after adding 6% of the fats to the feeds. Highly oxidized lipid and TFA feeds significantly increased the contents of cholesterol and oxycholesterols in all tissues of chicken (0.01 < p <= 0.05). The contents of oxycholesterols in chicken meat, liver and plasma obtained from TFA feeding trials varied between 17 and 48 μg/100 g in meat, 19-42 μg/100 g in liver and 105-126 μg/dL in plasma. In contrast, in the oxidized lipid feeding trials, oxycholesterols varied between 13 and 75 μg/100 g in meat, 30-58 μg/100 g in liver and 66-209 μg/dL in plasma. Meat from chickens fed with feeds containing high levels of TFAs or oxidized lipids may contribute to higher ingestion of cholesterol and oxycholesterols by humans.

Modeling and manufacturability assessment of bistable quantum-dot cells

We have investigated the behavior of bistable cells made up of four quantum dots and occupied by two electrons, in the presence of realistic confinement potentials produced by depletion gates on top of a GaAs/AlGaAs heterostructure. Such a cell represents the basic building block for logic architectures based on the concept of quantum cellular automata (QCA) and of ground state computation, which have been proposed as an alternative to traditional transistor-based logic circuits. We have focused on the robustness of the operation of such cells with respect to asymmetries derived from fabrication tolerances. We have developed a two-dimensional model for the calculation of the electron density in a driven cell in response to the polarization state of a driver cell. Our method is based on the one-shot configuration-interaction technique, adapted from molecular chemistry. From the results of our simulations, we conclude that an implementation of QCA logic based on simple ¿hole arrays¿ is not feasible, because of the extreme sensitivity to fabrication tolerances. As an alternative, we propose cells defined by multiple gates, where geometrical asymmetries can be compensated for by adjusting the bias voltages. Even though not immediately applicable to the implementation of logic gates and not suitable for large scale integration, the proposed cell layout should allow an experimental demonstration of a chain of QCA cells.

Modeling and Classifying Breast Tissue Density in Mammograms

We present a new approach to model and classify breast parenchymal tissue. Given a mammogram, first, we will discover the distribution of the different tissue densities in an unsupervised manner, and second, we will use this tissue distribution to perform the classification. We achieve this using a classifier based on local descriptors and probabilistic Latent Semantic Analysis (pLSA), a generative model from the statistical text literature. We studied the influence of different descriptors like texture and SIFT features at the classification stage showing that textons outperform SIFT in all cases. Moreover we demonstrate that pLSA automatically extracts meaningful latent aspects generating a compact tissue representation based on their densities, useful for discriminating on mammogram classification. We show the results of tissue classification over the MIAS and DDSM datasets. We compare our method with approaches that classified these same datasets showing a better performance of our proposal

Precursor nanoscale modulations in ferromagnets: Modeling and thermodynamic characterization

Using a Ginzburg-Landau model for the magnetic degrees of freedom with coupling to disorder, we demonstrate through simulations the existence of stripelike magnetic precursors recently observed in Co-Ni-Al alloys above the Curie temperature. We characterize these magnetic modulations by means of the temperature dependence of local magnetization distribution, magnetized volume fraction, and magnetic susceptibility. We also obtain a temperature-disorder strength phase diagram in which a magnetic tweed phase exists in a small region between the paramagnetic and dipolar phases.