¿Es el sexo femenino un factor de riesgo quirúrgico en la cirugía de valvular?

RESULTADOS: Se intervino un 60,7% de los pacientes de SV aórtica, un 25,7% de SV mitral , un 13,6% de doble SV. Además, en el 22,5% se realizó revascularización coronaria. Las mujeres presentaban más edad, SV mitral, reintervención, fibrilación auricular, anemia y peor clase funcional. Los varones presentaron más tabaquismo, SV aórtica, enfermedad coronaria, cirugía de revascularización coronaria, función sistólica deprimida y tiempo de clampaje aórtico. En el análisis bivariado relacionado con mortalidad hospitalaria (8,35%) fueron significativos la edad, el sexo, la clase funcional, la posición de la prótesis, la superficie corporal, la anemia, el número de concentrados de hematíes y el tiempo de clampaje aórtico. Se constató como factores de riesgo independientes el sexo (OR 2,92; 95% intervalo confianza 1,05-8,14) y la anemia (OR 4,23; 95% intervalo confianza 1,66-10,8) tras ajustarlos con los factores de riesgo, factores confusores y el año de intervención. CONCLUSIONES: El sexo femenino es un factor de riesgo independiente para la mortalidad hospitalaria en la cirugía de sustitución valvular.

The internal wave field in Sau reservoir : Observation and modeling of a third vertical mode

Water withdrawal from Mediterranean reservoirs in summer is usually very high. Because of this, stratification is often continuous and far from the typical two-layered structure, favoring the excitation of higher vertical modes. The analysis of wind, temperature, and current data from Sau reservoir (Spain) shows that the third vertical mode of the internal seiche (baroclinic mode) dominated the internal wave field at the beginning of September 2003. We used a continuous stratification two-dimensional model to calculate the period and velocity distribution of the various modes of the internal seiche, and we calculated that the period of the third vertical mode is ;24 h, which coincides with the period of the dominating winds. As a result of the resonance between the third mode and the wind, the other oscillation modes were not excited during this period

Human capital as a factor of growth and employment at the regional level. The case of Spain

We use statistical techniques to quantify the effects of school attainment on individual wages, participation rates and employment probabilities in Spain, and to measure the contribution of education to labour productivity at the regional level. These estimates are then combined with data on private and public expenditure on education and with information on taxes and social benefits to construct measures of the private and social returns to schooling, to explore the effects of public policies on private incentives to invest in human capital, and to analyse the long-term effects of schooling on public finances. The results are used, together with estimates of the returns to alternative assets, to draw some tentative conclusions regarding the adequacy of the aggregate investment patterns observed in the regions of Spain, and to identify changes in the design of national and EU cohesion and growth policies that may help enhance their effectiveness.

Mathematical modeling and analysis of the interaction of populations of bacteria and bacteriophages within chicken intestine

Vegeu el resum a l'inici del document de l'arxiu adjunt

Experimental Modeling and Control Strategies on an Open Mobile Robot Platform PRIM

This research work deals with the problem of modeling and design of low level speed controller for the mobile robot PRIM. The main objective is to develop an effective educational tool. On one hand, the interests in using the open mobile platform PRIM consist in integrating several highly related subjects to the automatic control theory in an educational context, by embracing the subjects of communications, signal processing, sensor fusion and hardware design, amongst others. On the other hand, the idea is to implement useful navigation strategies such that the robot can be served as a mobile multimedia information point. It is in this context, when navigation strategies are oriented to goal achievement, that a local model predictive control is attained. Hence, such studies are presented as a very interesting control strategy in order to develop the future capabilities of the system

Altered brain-derived neurotrophic factor blood levels and gene variability are associated with anorexia and bulimia

Murine models and association studies in eating disorder (ED) patients have shown a role for the brain-derived neurotrophic factor (BDNF) in eating behavior. Some studies have shown association of BDNF -270C/T single-nucleotide polymorphism (SNP) with bulimia nervosa (BN), while BDNF Val66Met variant has been shown to be associated with both BN and anorexia nervosa (AN). To further test the role of this neurotrophin in humans, we screened 36 SNPs in the BDNF gene and tested for their association with ED and plasma BDNF levels as a quantitative trait. We performed a family-based association study in 106 ED nuclear families and analyzed BDNF blood levels in 110 ED patients and in 50 sib pairs discordant for ED. The rs7124442T/rs11030102C/rs11030119G haplotype was found associated with high BDNF levels (mean BDNF TCG haplotype carriers = 43.6 ng/ml vs. mean others 23.0 ng/ml, P = 0.016) and BN (Z = 2.64; P recessive = 0.008), and the rs7934165A/270T haplotype was associated with AN (Z =-2.64; P additive = 0.008). The comparison of BDNF levels in 50 ED discordant sib pairs showed elevated plasma BDNF levels for the ED group (mean controls = 41.0 vs. mean ED = 52.7; P = 0.004). Our data strongly suggest that altered BDNF levels modulated by BDNF gene variability are associated with the susceptibility to ED, providing physiological evidence that BDNF plays a role in the development of AN and BN, and strongly arguing for its involvement in eating behavior and body weight regulation.

Projectes de modelatge i simulació avançada de sistemes mitjançant l'entorn ARENA

RESUM En l’exercici de les funcions típiques de qualsevol activitat humana, l’home ha de prendre decisions d’un o altre tipus permanentment i aquesta situació porta afegit, per lo general risc i incertesa, el que compromet la qualitat i l’èxit de la decisió. Per ajudar i contrarestar aquesta situació, l’home ha desenvolupat a través del temps una diversitat d’eines que li permeten minimitzar el risc i la incertesa en la presa de decisions. La simulació és una d’aquestes eines. Mitjançant la seva aplicació no només s’aconsegueix la comesa anterior, sinó que també es minimitzen els costos involucrats en la decisió mitjançant un millor ús dels recursos, la disminució del temps emprat per a la seva realització i la minimització de les probabilitats de risc. Aquest projecte representa la continuació d’un primer estudi introductori de la simulació anomenat: Estudi i guia docent per a modelatge i simulació de sistemes mitjançant l’entorn ARENA [9]. Realitzat per l’alumna d’Enginyeria en Organització Industrial de la Universitat de Vic, Montse Carbonell Crosas, l’any 2008 i sota la codirecció del director d’aquest segon projecte, el professor Juli Ordeix Rigo. Aquest nou projecte s’inicia amb una primera part teòrica, continguda dins del primer volum, la qual reforça els conceptes teòrics referents a la simulació amb ARENA, ja vistos en l’anterior projecte. Complementant aquells considerats bàsics i els de més utilitat i finalitza introduint nous conceptes avançats. Els nous capítols de temàtica avançada, junt als primers més bàsics de la primera part són exercitats dins de la segona, formant el segon volum d’aquest projecte. El mateix requereix la participació activa de l’alumne, per tal de realitzar cadascun dels 89 exercicis pràctics que es plantegen i poder onsolidar l’aprenentatge teòric d’aquesta eina avançada de simulació fent consultes als apartats teòrics recomanats dins de cada exercici. La complexitat dels exercicis anirà augmentant gradualment i s’insisteix en seguir la metodologia presentada en el projecte per a realitzar-los tots de forma ordenada i ascendent. L’ alumne quan acabi la part pràctica, haurà consolidat tota la part teòrica i serà capaç d’exercir com analista per tal de generar els seus propis projecte de simulació.

Thermal modeling and management in ultrathin chip stack technology

This paper presents a thermal modeling for power management of a new three-dimensional (3-D) thinned dies stacking process. Besides the high concentration of power dissipating sources, which is the direct consequence of the very interesting integration efficiency increase, this new ultra-compact packaging technology can suffer of the poor thermal conductivity (about 700 times smaller than silicon one) of the benzocyclobutene (BCB) used as both adhesive and planarization layers in each level of the stack. Thermal simulation was conducted using three-dimensional (3-D) FEM tool to analyze the specific behaviors in such stacked structure and to optimize the design rules. This study first describes the heat transfer limitation through the vertical path by examining particularly the case of the high dissipating sources under small area. First results of characterization in transient regime by means of dedicated test device mounted in single level structure are presented. For the design optimization, the thermal draining capabilities of a copper grid or full copper plate embedded in the intermediate layer of stacked structure are evaluated as a function of the technological parameters and the physical properties. It is shown an interest for the transverse heat extraction under the buffer devices dissipating most the power and generally localized in the peripheral zone, and for the temperature uniformization, by heat spreading mechanism, in the localized regions where the attachment of the thin die is altered. Finally, all conclusions of this analysis are used for the quantitative projections of the thermal performance of a first demonstrator based on a three-levels stacking structure for space application.

Self-dynamic structure factor of dense liquids: Theory and simulation

The self-intermediate dynamic structure factor Fs(k,t) of liquid lithium near the melting temperature is calculated by molecular dynamics. The results are compared with the predictions of several theoretical approaches, paying special attention to the Lovesey model and the Wahnstrm and Sjgren mode-coupling theory. To this end the results for the Fs(k,t) second memory function predicted by both models are compared with the ones calculated from the simulations.

Use of palm-oil by-products in chicken and rabbit feeds: effect on the fatty acid and tocol composition of meat, liver and plasma

This study was undertaken in the framework of a larger European project dealing with the characterization of fat co- and by-products from the food chain, available for feed uses. In this study, we compare the effects, on the fatty acid (FA) and tocol composition of chicken and rabbit tissues, of the addition to feeds of a palm fatty acid distillate, very low in trans fatty acids (TFA), and two levels of the corresponding hydrogenated by-product, containing intermediate and high levels of TFA. Thus, the experimental design included three treatments, formulated for each species, containing the three levels of TFA defined above. Obviously, due to the use of hydrogenated fats, the levels of saturated fatty acids (SFA) show clear differences between the three dietary treatments. The results show that diets high in TFA (76 g/kg fat) compared with those low in TFA (4.4 g/kg fat) led to a lower content of tocopherols and tocotrienols in tissues, although these differences were not always statistically significant, and show a different pattern for rabbit and chicken. The TFA content in meat, liver and plasma increased from low-to-high TFA feeds in both chicken and rabbit. However, the transfer ratios from feed were not proportional to the TFA levels in feeds, reflecting certain differences according to the animal species. Moreover, feeds containing fats higher in TFA induced significant changes in tissue SFA, monounsaturated fatty acids and polyunsaturated fatty acids composition, but different patterns can be described for chicken and rabbit and for each type of tissue.

Mobile robot experimental modeling and control strategies using sensor fusion

This research work deals with the problem of modeling and design of low level speed controller for the mobile robot PRIM. The main objective is to develop an effective educational, and research tool. On one hand, the interests in using the open mobile platform PRIM consist in integrating several highly related subjects to the automatic control theory in an educational context, by embracing the subjects of communications, signal processing, sensor fusion and hardware design, amongst others. On the other hand, the idea is to implement useful navigation strategies such that the robot can be served as a mobile multimedia information point. It is in this context, when navigation strategies are oriented to goal achievement, that a local model predictive control is attained. Hence, such studies are presented as a very interesting control strategy in order to develop the future capabilities of the system. In this context the research developed includes the visual information as a meaningful source that allows detecting the obstacle position coordinates as well as planning the free obstacle trajectory that should be reached by the robot

Modeling and control of electromechanical systems

The material presented in the these notes covers the sessions Modelling of electromechanical systems, Passive control theory I and Passive control theory II of the II EURON/GEOPLEX Summer School on Modelling and Control of Complex Dynamical Systems.We start with a general description of what an electromechanical system is from a network modelling point of view. Next, a general formulation in terms of PHDS is introduced, and some of the previous electromechanical systems are rewritten in this formalism. Power converters, which are variable structure systems (VSS), can also be given a PHDS form.We conclude the modelling part of these lectures with a rather complex example, showing the interconnection of subsystems from several domains, namely an arrangement to temporally store the surplus energy in a section of a metropolitan transportation system based on dc motor vehicles, using either arrays of supercapacitors or an electric poweredflywheel. The second part of the lectures addresses control of PHD systems. We first present the idea of control as power connection of a plant and a controller. Next we discuss how to circumvent this obstacle and present the basic ideas of Interconnection and Damping Assignment (IDA) passivity-based control of PHD systems.

Modeling and manufacturability assessment of bistable quantum-dot cells

We have investigated the behavior of bistable cells made up of four quantum dots and occupied by two electrons, in the presence of realistic confinement potentials produced by depletion gates on top of a GaAs/AlGaAs heterostructure. Such a cell represents the basic building block for logic architectures based on the concept of quantum cellular automata (QCA) and of ground state computation, which have been proposed as an alternative to traditional transistor-based logic circuits. We have focused on the robustness of the operation of such cells with respect to asymmetries derived from fabrication tolerances. We have developed a two-dimensional model for the calculation of the electron density in a driven cell in response to the polarization state of a driver cell. Our method is based on the one-shot configuration-interaction technique, adapted from molecular chemistry. From the results of our simulations, we conclude that an implementation of QCA logic based on simple ¿hole arrays¿ is not feasible, because of the extreme sensitivity to fabrication tolerances. As an alternative, we propose cells defined by multiple gates, where geometrical asymmetries can be compensated for by adjusting the bias voltages. Even though not immediately applicable to the implementation of logic gates and not suitable for large scale integration, the proposed cell layout should allow an experimental demonstration of a chain of QCA cells.

Modeling and Classifying Breast Tissue Density in Mammograms

We present a new approach to model and classify breast parenchymal tissue. Given a mammogram, first, we will discover the distribution of the different tissue densities in an unsupervised manner, and second, we will use this tissue distribution to perform the classification. We achieve this using a classifier based on local descriptors and probabilistic Latent Semantic Analysis (pLSA), a generative model from the statistical text literature. We studied the influence of different descriptors like texture and SIFT features at the classification stage showing that textons outperform SIFT in all cases. Moreover we demonstrate that pLSA automatically extracts meaningful latent aspects generating a compact tissue representation based on their densities, useful for discriminating on mammogram classification. We show the results of tissue classification over the MIAS and DDSM datasets. We compare our method with approaches that classified these same datasets showing a better performance of our proposal

Precursor nanoscale modulations in ferromagnets: Modeling and thermodynamic characterization

Using a Ginzburg-Landau model for the magnetic degrees of freedom with coupling to disorder, we demonstrate through simulations the existence of stripelike magnetic precursors recently observed in Co-Ni-Al alloys above the Curie temperature. We characterize these magnetic modulations by means of the temperature dependence of local magnetization distribution, magnetized volume fraction, and magnetic susceptibility. We also obtain a temperature-disorder strength phase diagram in which a magnetic tweed phase exists in a small region between the paramagnetic and dipolar phases.