21 resultados para Diffusion and lntermittency in Chaotic Maps
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
What explains the spatial distribution of wages across US counties? I find that two of the most important factors are spatial technology diffusion and externalities due to the aggregate scale of production. One empirical finding supporting the importance of spatial technology diffusion is that average wages in a county decrease with the average level of schooling in neighboring counties when employment in the county and average wages in neighboring counties are held constant. All empirical results are obtained using anovel instrument for (endogenous) employment at the county-leveland take into account other factors (e.g. productivity-differencesacross states, climate) that may determine wages.
Resumo:
Domain growth in a two-dimensional binary alloy is studied by means of Monte Carlo simulation of an ABV model. The dynamics consists of exchanges of particles with a small concentration of vacancies. The influence of changing the vacancy concentration and finite-size effects has been analyzed. Features of the vacancy diffusion during domain growth are also studied. The anomalous character of the diffusion due to its correlation with local order is responsible for the obtained fast-growth behavior.
Resumo:
We prove that Brownian market models with random diffusion coefficients provide an exact measure of the leverage effect [J-P. Bouchaud et al., Phys. Rev. Lett. 87, 228701 (2001)]. This empirical fact asserts that past returns are anticorrelated with future diffusion coefficient. Several models with random diffusion have been suggested but without a quantitative study of the leverage effect. Our analysis lets us to fully estimate all parameters involved and allows a deeper study of correlated random diffusion models that may have practical implications for many aspects of financial markets.
Resumo:
A diffusion-limited-aggregation (DLA) model with two components (A and B species) is presented to investigate the structure of the composite deposits. The sticking probability PAB (=PBA) between the different species is introduced into the original DLA model. By using computer simulation it is shown that various patterns are produced with varying the sticking probabilities PAB (=PBA) and PAA (= PBB), where PAA (=PBB) is the sticking probability between the same species. Segregated patterns can be analyzed under the condition PAB < PAA, assumed throughout the paper. With decreasing sticking probability PAB, a clustering of the same species occurs. With sufficiently small values of both sticking probabilities PAB and PAA, the deposit becomes dense and the segregated patterns of the composite deposit show a striped structure. The effect of the concentration on the pattern morphology is also shown.
Resumo:
The aim of the present work is to investigate innovative processes within a geographical cluster, and thus contribute to the debate on the effects of industrial clusters on innovation capacity. In particular, we would like to ascertain whether the advantages of industrial districts in promoting innovation, as already revealed by literature (diffusion of knowledge, social capital and trust, efficient networking), are also keys to success in the Tuscan shipbuilding industry of pleasure and sporting boats. First, we verify the existence of clusters of shipbuilding in Tuscany, using a specific methodology. Next, in the identified clusters, we analyse three innovative networks financed in a policy to support innovation, and examine whether the typical features of a cluster for promoting innovation are at work, using a questionnaire administered to 71 actors. Finally, we develop a performance analysis of the cluster firms and ascertain whether their different behaviours also lead to different performances. The analysis results show that our case records effects of industrial clustering on innovation capacity, such as the important role given to trust and social capital, the significant worth put in interfirm relations and in each partner’s specific competencies, or even the distinctive performance of firms belonging to a cluster.
Resumo:
In this paper we consider a representative a priori unstable Hamiltonian system with 2+1/2 degrees of freedom, to which we apply the geometric mechanism for diffusion introduced in the paper Delshams et al., Mem.Amer.Math. Soc. 2006, and generalized in Delshams and Huguet, Nonlinearity 2009, and provide explicit, concrete and easily verifiable conditions for the existence of diffusing orbits. The simplification of the hypotheses allows us to perform explicitly the computations along the proof, which contribute to present in an easily understandable way the geometric mechanism of diffusion. In particular, we fully describe the construction of the scattering map and the combination of two types of dynamics on a normally hyperbolic invariant manifold.
Resumo:
BackgroundDespite the intrinsic value of scientific disciplines, such as Economics, it is appropriate to gauge the impact of its applications on social welfare, or at least Health Economics (HE) case- its influence on health policy and management.MethodsThe three relevant features of knowledge (production, diffusion and application) are analyzed, more from an emic perspective the one used in Anthropology relying on the experience of the members of a culture- than from an etic approach seated on material descriptions and dubious statistics.ResultsThe soundness of the principles and results of HE depends on its disciplinary foundations,whereas its relevance than does not imply translation into practice- is more linked with the problems studied. Important contributions from Economics to the health sphere are recorded.HE in Spain ranks seventh in the world despite the relatively minor HE contents of its clinical and health services research journals.HE has in Spain more presence than influence, having failed to impregnate sufficiently thedaily events.ConclusionsHE knowledge required by a politician, a health manager or a clinician is rather limited; the main impact of HE could be to develop their intuition and awareness.
Resumo:
Convective flows of a small Prandtl number fluid contained in a two-dimensional cavity subject to a lateral thermal gradient are numerically studied by using different techniques. The aspect ratio (length to height) is kept at around 2. This value is found optimal to make the flow most unstable while keeping the basic single-roll structure. Two cases of thermal boundary conditions on the horizontal plates are considered: perfectly conducting and adiabatic. For increasing Rayleigh numbers we find a transition from steady flow to periodic oscillations through a supercritical Hopf bifurcation that maintains the centrosymmetry of the basic circulation. For a Rayleigh number of about ten times that of the Hopf bifurcation the system initiates a complex scenario of bifurcations. In the conductive case these include a quasiperiodic route to chaos. In the adiabatic one the dynamics is dominated by the interaction of two Neimark-Sacker bifurcations of the basic periodic solutions, leading to the stable coexistence of three incommensurate frequencies, and finally to chaos. In all cases, the complex time-dependent behavior does not break the basic, single-roll structure.
Resumo:
We study the motion of an unbound particle under the influence of a random force modeled as Gaussian colored noise with an arbitrary correlation function. We derive exact equations for the joint and marginal probability density functions and find the associated solutions. We analyze in detail anomalous diffusion behaviors along with the fractal structure of the trajectories of the particle and explore possible connections between dynamical exponents of the variance and the fractal dimension of the trajectories.
Resumo:
We study the existence of strange nonchaotic attractors (SNA) in the family of Harper maps. We prove that for a set of parameters of positive measure, the map possesses a SNA. However, the set is nowhere dense. By changing the parameter arbitrarily small amounts, the attractor is a smooth curve and not a SNA.
Resumo:
[eng] Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.
Resumo:
[eng] Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.
Resumo:
[eng] Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.
Resumo:
Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.
Resumo:
Catalonia was the only Mediterranean region among the early followers of the British Industrial Revolution in the second third of the nineteenth century. The roots of this industrialisation process can be traced back to the seventeenth and eighteenth centuries when the Catalan economy became successfully integrated in international trade and the region enjoyed an intensification of its agrarian and proto-industrial activities. These capitalist developments were subsequently reinforced by a successful printed calico manufacturing business concentrated in the city of Barcelona. Although the factory system was largely adopted by the cotton industry in the 1840s, the diffusion of the spinning jenny had occurred earlier in the 1790s. In this paper, in line with Allen (2009a, 2009b), we explore whether relative factor prices played a role in the widespread adoption of the spinning jenny in Catalonia.