Development of advanced silicon radiation detectors for high energy physics and medical imaging

The 1st chapter of this work presents the different experiments and collaborations in which I am involved during my PhD studies of Physics. Following those descriptions, the 2nd chapter is dedicated to how the radiation affects the silicon sensors, as well as some experimental measurements carried out at CERN (Geneve, Schwitzerland) and IFIC (Valencia, Spain) laboratories. Besides the previous investigation results, this chapter includes the most recent scientific papers appeared in the latest RD50 (Research & Development #50) Status Report, published in January 2007, as well as some others published this year. The 3rd and 4th are dedicated to the simulation of the electrical behavior of solid state detectors. In chapter 3 are reported the results obtained for the illumination of edgeless detectors irradiated at different fluences, in the framework of the TOSTER Collaboration. The 4th chapter reports about simulation design, simulation and fabrication of a novel 3D detector developed at CNM for ions detection in the future ITER fusion reactor. This chapter will be extended with irradiation simulations and experimental measurements in my PhD Thesis.

A new hybrid summarizer based on vector Space model, statistical physics and linguistics

In this article we present a hybrid approach for automatic summarization of Spanish medical texts. There are a lot of systems for automatic summarization using statistics or linguistics, but only a few of them combining both techniques. Our idea is that to reach a good summary we need to use linguistic aspects of texts, but as well we should benefit of the advantages of statistical techniques. We have integrated the Cortex (Vector Space Model) and Enertex (statistical physics) systems coupled with the Yate term extractor, and the Disicosum system (linguistics). We have compared these systems and afterwards we have integrated them in a hybrid approach. Finally, we have applied this hybrid system over a corpora of medical articles and we have evaluated their performances obtaining good results.

New Radicals and new applications of Dynamic Nuclear Polarization of biological systems

Dynamic Nuclear Polarization (DNP) is an emerging technique that could revolutionize the NMR study of small molecules at very low concentrations by the increase in sensitivity that results from transfer of polarization between electronic and nuclear spins. Although the underlying physics has been known for a long time, in the last few years there has been a lot of excitement on the chemistry and biology NMR community caused by the demonstration that the highly polarized nuclei that are prepared in solid state at very low temperatures (1-2 K) could be rapidly transferred to liquid samples at room temperature and studied in solution by conventional NMR techniques. In favorable cases several order of magnitude increases in sensitivity have been achieved. The technique is now mature enough that a commercial instrument is available. The efficiency of DNP depends on two crucial aspects: i) the efficiency of the nuclear polarization process and ii) the efficiency of the transfer from the initial solid state to the fluid state in which NMR is measured. The preferred areas of application (iii) will be dictated by situations in which the low concentration of the sample or its intrinsic low receptivity are the limiting factors .

Anisotropic dispersion, space competition, and the slowdown of the Neolithic transition

The front speed of the Neolithic (farmer) spread in Europe decreased as it reached Northern latitudes, where the Mesolithic (huntergatherer) population density was higher. Here, we describe a reaction diffusion model with (i) an anisotropic dispersion kernel depending on the Mesolithicpopulation density gradient and (ii) a modified population growth equation. Both effects are related to the space available for the Neolithic population. The model is able to explain the slowdown of the Neolithic front as observed from archaeological data

Liquid and solid scintillation: principles and applications

Scintillation counting is one of the most important developments in the application of radioisotopes to procedures needed by scientists, physicians, engineers, and technicians from many diverse discipline for the detection and quantitative measurement of radioactivity. In fact, Scintillation is the most sensitive and versatile technique for the detection and quantification ofradioactivity. Particularly, Solid and Liquid scintillation measurement are,nowadays, standard laboratory methods in the life-sciences for measuringradiation from gamma- and beta-emitting nuclides, respectively. Thismethodology is used routinely in the vast majority of diagnostic and/or researchlaboratories from those of biochemistry and biology to clinical departments.

Integro-difference equations for interacting species and the Neolithic transition

We introduce a set of sequential integro-difference equations to analyze the dynamics of two interacting species. Firstly, we derive the speed of the fronts when a species invades a space previously occupied by a second species, and check its validity by means of numerical random-walk simulations. As an example, we consider the Neolithic transition: the predictions of the model are consistent with the archaeological data for the front speed, provided that the interaction parameter is low enough. Secondly, an equation for the coexistence time between the invasive and the invaded populations is obtained for the first time. It agrees well with the simulations, is consistent with observations of the Neolithic transition, and makes it possible to estimate the value of the interaction parameter between the incoming and the indigenous populations

Materials developed by mechanical alloying and melt spinning

Materials science is a multidisciplinary research topic related to the development of physics and technology. Mechanical alloying of ribbon flakes is a two steps route to develop advanced materials. In this work, a Fe based alloy was obtained using three pathways: mechanical alloying, melt-spinning and mechanical alloying of previously melt-spun samples. Processing conditions allow us to obtain amorphous or nanocrystalline structures. Furthermore, a bibliographic revision of mechanical alloying is here presented

Mecanismes de reacció de sistemes catalítics amb èmfasi en carbens de Fischer i quantificació de l'aromaticitat en petites molècules inorgàniques cícliques i planes.

El tema principal del treball és sobre l'estudi teòric de l'estructura i reactivitat en carbens de Fischer de la forma (CO)5Cr=C(X)R (X= OH, NH2, OMe, NMe2 i R= CHCH2 i Ph). Particularment, el nostre interès va sorgir del tipus de reaccions de cicloadicció que donen lloc a la síntesi de productes naturals i fàrmacs de gran valor afegit. Hem estudiat els mecanismes de reacció dels casos més comuns de cicloanul•lació: la reacció de benzanul•lació de Dötz i ciclopentanulacions que es troben en competència amb el primer cas, derivats de l'inserció de acetilè i fenilacetilè. En l'últim pas de les reaccions que comporten la formació d'un sistema de més d'un anell, hi tenim una migració del complex metàl•lic de crom d'un extrem a un altre anomenat com rearranjament haptotròpic. Aleshores, hem investigat sobre els mecanismes de migració haptotròpica de Cr(CO)3 sobre hidrocarburs aromàtics policíclics analitzant l'efecte de la mida i la curvatura del sistema així com la complexació d'un segon fragment metàl•lic a la manera de coordinació als anells. D'una altre banda, vam estudiar l'aromaticitat en 54 cúmuls cíclics de molecules inorgàniques mitjançant metodologia desenvolupada al nostre grup de recerca i altres. Vam proposar la tècnica del scan-NICS com nova mesura quantitativa d'aromaticitat i reportar l'escassa correlació entre els distints índexs d'aromaticitat a la literatura. Finalment, com resultat de col•laboracions en estades de recerca, he desenvolupat propostes de mecanismes de reacció en sistemes catalítics de isonitrils i fosfinetà-amides i en dímers de gassos nobles.

Experimentació a distància de la física per a enginyers (EDFE)

El laboratori de física és el lloc que permet apropar la Física i la seva realitat quotidiana, tant la tecnològica com la científica, a l'estudiantat mitjançant experiències i demostracions motivadores. En general, les pràctiques de laboratori se solen realitzar per parelles, encara que no necessàriament, propiciant un treball en equip. Ara bé, pensant en aquelles estudiantes i aquells estudiants que no poden seguir el calendari de sessions presencials establert, per raons justificables, s’ha generat un material docent innovador consistent en la filmació de vídeos d’algunes de les pràctiques que actualment s'estan duent a terme en el laboratori de Física de l'EPSEM. Les filmacions van acompanyades per uns tutorials que permeten introduir la pràctica i il·lustrar tots els conceptes teòrics que hi intervenen i algunes simulacions. A més, també hi ha disponible uns tests d'autoavaluació i d'avaluació que acreditin l'aprenentatge de l'estudiant. L’objectiu és procurar, a partir d’una experimentació virtual, minimitzar la manca d’adquisició d’algunes habilitats pròpies de l’experimentació real al laboratori. Els productes creats han estat inclosos en el web del Departament de Física Aplicada de la UPC a l'EPSEM, on es proporciona tot un conjunt d’eines i informacions pensades per facilitar una millor forma de treballar en un laboratori. En aquest web es poden trobar, les normes generals per a la realització de les pràctiques i per a l’elaboració dels informes preceptius, el guió i l’esquema del muntatge de cada experimentació, així com enllaços a webs relacionats amb la física, que poden resultar molt útils per a l’alumnat. El pas endavant que suposa el material desenvolupat, ampliable en un futur, és sens dubte una alternativa educativa complementaria per garantir una formació més integral de les nostres estudiantes i dels nostres estudiants, en correspondència amb l’esperit de fomentar l'autoaprenentatge que traspua el procés d'integració a l'EEES. Veure: http://www.epsem.upc.edu/~practiquesfisica/

Producció de material docent per a ciència de materials mitjançant microscòpia electrònica de rastreig i làser confocal

Aquest projecte s'ha realitzat al Servei de Microscòpia de la Universitat Autònoma de Barcelona, i ha tingut una durada de dos anys (2006-2008). La finalitat d’aquest projecte ha estat l’elaboració de material didàctic basat en la captació d’imatges i l’edició de recursos pedagògics de suport digital aplicats a la ciència de materials. Es pretén millorar així la qualitat docent de les pràctiques de diverses assignatures dels ensenyaments de Física i d’Enginyeria de Materials utilitzant tècniques d’anàlisi actuals com són la Microscòpia Electrònica de Rastreig (MER) i la Microscòpia Optica (MO). Amb aquest projecte es vol fomentar també el treball interdisciplinari en equip entre professionals (docents i tècnics superiors de recerca) i acostar la teoria de les assignatures a la realització pràctica, facilitant el suport digital necessari per aconseguir un màxim aprofitament a les aules. Les imatges de MER i MO ajudaran als alumnes a familiaritzar-se amb el món de la recerca i la indústria.

Memòria metodològica de treball plantejada per a l'elaboració del projecte Alfabetització informacional : disseny d'estratègies, de serveis i recursos per a la fidelització d'usuaris de la biblioteca universitària

El treball se centra en l'anàlisi de les causes de la baixa participació en les sessions de formació d'usuaris per part dels estudiants, professors i investigadors universitaris de la Biblioteca de Física i Química de la Universitat de Barcelona. Es remarca la importància d'aquesta formació en la cerca, selecció i difusió de la informació així com la inclusió d'un programa d'alfabetització informacional. Es presenten possibles solucions i propostes per tal d'augmentar aquesta assistència (major difusió, publicitat...), amortitzar els recursos i serveis que preparen els bibliotecaris i en definitiva fidelitzar aquests usuaris.

Universal complex structures in written language

Quantitative linguistics has provided us with a number of empirical laws that characterise the evolution of languages and competition amongst them. In terms of language usage, one of the most influential results is Zipf’s law of word frequencies. Zipf’s law appears to be universal, and may not even be unique to human language. However, there is ongoing controversy over whether Zipf’s law is a good indicator of complexity. Here we present an alternative approach that puts Zipf’s law in the context of critical phenomena (the cornerstone of complexity in physics) and establishes the presence of a large-scale “attraction” between successive repetitions of words. Moreover, this phenomenon is scale-invariant and universal – the pattern is independent of word frequency and is observed in texts by different authors and written in different languages. There is evidence, however, that the shape of the scaling relation changes for words that play a key role in the text, implying the existence of different “universality classes” in the repetition of words. These behaviours exhibit striking parallels with complex catastrophic phenomena.

Simulation methods with extended stability for stiff biochemical kinetics

Background: With increasing computer power, simulating the dynamics of complex systems in chemistry and biology is becoming increasingly routine. The modelling of individual reactions in (bio)chemical systems involves a large number of random events that can be simulated by the stochastic simulation algorithm (SSA). The key quantity is the step size, or waiting time, τ, whose value inversely depends on the size of the propensities of the different channel reactions and which needs to be re-evaluated after every firing event. Such a discrete event simulation may be extremely expensive, in particular for stiff systems where τ can be very short due to the fast kinetics of some of the channel reactions. Several alternative methods have been put forward to increase the integration step size. The so-called τ-leap approach takes a larger step size by allowing all the reactions to fire, from a Poisson or Binomial distribution, within that step. Although the expected value for the different species in the reactive system is maintained with respect to more precise methods, the variance at steady state can suffer from large errors as τ grows. Results: In this paper we extend Poisson τ-leap methods to a general class of Runge-Kutta (RK) τ-leap methods. We show that with the proper selection of the coefficients, the variance of the extended τ-leap can be well-behaved, leading to significantly larger step sizes.Conclusions: The benefit of adapting the extended method to the use of RK frameworks is clear in terms of speed of calculation, as the number of evaluations of the Poisson distribution is still one set per time step, as in the original τ-leap method. The approach paves the way to explore new multiscale methods to simulate (bio)chemical systems.

Organisational Values as "Attractors of Chaos": An Emerging Cultural Change to Manage Organisational Complexity

Business organisations are excellent representations of what in physics and mathematics are designated "chaotic" systems. Because a culture of innovation will be vital for organisational survival in the 21st century, the present paper proposes that viewing organisations in terms of "complexity theory" may assist leaders in fine-tuning managerial philosophies that provide orderly management emphasizing stability within a culture of organised chaos, for it is on the "boundary of chaos" that the greatest creativity occurs. It is argued that 21st century companies, as chaotic social systems, will no longer be effectively managed by rigid objectives (MBO) nor by instructions (MBI). Their capacity for self-organisation will be derived essentially from how their members accept a shared set of values or principles for action (MBV). Complexity theory deals with systems that show complex structures in time or space, often hiding simple deterministic rules. This theory holds that once these rules are found, it is possible to make effective predictions and even to control the apparent complexity. The state of chaos that self-organises, thanks to the appearance of the "strange attractor", is the ideal basis for creativity and innovation in the company. In this self-organised state of chaos, members are not confined to narrow roles, and gradually develop their capacity for differentiation and relationships, growing continuously toward their maximum potential contribution to the efficiency of the organisation. In this way, values act as organisers or "attractors" of disorder, which in the theory of chaos are equations represented by unusually regular geometric configurations that predict the long-term behaviour of complex systems. In business organisations (as in all kinds of social systems) the starting principles end up as the final principles in the long term. An attractor is a model representation of the behavioral results of a system. The attractor is not a force of attraction or a goal-oriented presence in the system; it simply depicts where the system is headed based on its rules of motion. Thus, in a culture that cultivates or shares values of autonomy, responsibility, independence, innovation, creativity, and proaction, the risk of short-term chaos is mitigated by an overall long-term sense of direction. A more suitable approach to manage the internal and external complexities that organisations are currently confronting is to alter their dominant culture under the principles of MBV.

Organisational values as "attractors of chaos": An emerging cultural change to manage organisational complexity

Business organisations are excellent representations of what in physics and mathematics are designated "chaotic" systems. Because a culture of innovation will be vital for organisational survival in the 21st century, the present paper proposes that viewing organisations in terms of "complexity theory" may assist leaders in fine-tuning managerial philosophies that provide orderly management emphasizing stability within a culture of organised chaos, for it is on the "boundary of chaos" that the greatest creativity occurs. It is argued that 21st century companies, as chaotic social systems, will no longer be effectively managed by rigid objectives (MBO) nor by instructions (MBI). Their capacity for self-organisation will be derived essentially from how their members accept a shared set of values or principles for action (MBV). Complexity theory deals with systems that show complex structures in time or space, often hiding simple deterministic rules. This theory holds that once these rules are found, it is possible to make effective predictions and even to control the apparent complexity. The state of chaos that self-organises, thanks to the appearance of the "strange attractor", is the ideal basis for creativity and innovation in the company. In this self-organised state of chaos, members are not confined to narrow roles, and gradually develop their capacity for differentiation and relationships, growing continuously toward their maximum potential contribution to the efficiency of the organisation. In this way, values act as organisers or "attractors" of disorder, which in the theory of chaos are equations represented by unusually regular geometric configurations that predict the long-term behaviour of complex systems. In business organisations (as in all kinds of social systems) the starting principles end up as the final principles in the long term. An attractor is a model representation of the behavioral results of a system. The attractor is not a force of attraction or a goal-oriented presence in the system; it simply depicts where the system is headed based on its rules of motion. Thus, in a culture that cultivates or shares values of autonomy, responsibility, independence, innovation, creativity, and proaction, the risk of short-term chaos is mitigated by an overall long-term sense of direction. A more suitable approach to manage the internal and external complexities that organisations are currently confronting is to alter their dominant culture under the principles of MBV.