Anàlisi, disseny i implementació d'una eina de simulació per a l'estudi de la interoperabilitat mitjançant conversió d'atributs en entorns multi-domini

El present projecte part d’un estudi sobre el tractament de situacions d’emergència, on es considera que una infraestructura de comunicació, sobre aquest tipus d’escenaris, ha d’implementar la interoperabilitat i el control d’accés, entre els diferents elements que hi participen, utilitzant la conversió d’atributs. Per tal de materialitzar aquest estudi s’ha realitzat un anàlisi de les necessitats de l’aplicació i un disseny detallat dels mòduls que el formen. S’ha implementat d’aquesta manera una eina de simulació per entorns multi-domini. Finalment s’han realitzat un conjunt de proves per comprovar la seva fiabilitat respecte l’estudi original.

Analysis and Design of a secure WLAN solution for Cobre Las Cruces

Cobre Las Cruces is a renowned copper mining company located in Sevilla, with unexpected problems in wireless communications that have a direct affectation in production. Therefore, the main goals are to improve the WiFi infrastructure, to secure it and to detect and prevent from attacks and from the installation of rogue (and non-authorized) APs. All of that integrated with the current ICT infrastructure.This project has been divided into four phases, although only two of them have been included into the TFC; they are the analysis of the current situation and the design of a WLAN solution.Once the analysis part was finished, some weaknesses were detected. Subjects such as lack of connectivity and control, ignorance about installed WiFi devices and their localization and state and, by and large, the use of weak security mechanisms were some of the problems found. Additionally, due to the fact that the working area became larger and new WiFi infrastructures were added, the first phase took more time than expected.As a result of the detailed analysis, some goals were defined to solve and it was designed a centralized approach able to cope with them. A solution based on 802.11i and 802.1x protocols, digital certificates, a probe system running as IDS/IPS and ligthweight APs in conjunction with a Wireless LAN Controller are the main features.

On the design of peer punishment experiments

We discuss how technologies of peer punishment might bias the results that are observed in experiments. A crucial parameter is the “fine-to-fee” ratio, which describes by how much the punished subjects income is reduced relatively to the fee the punishing subject has to pay to inflict punishment. We show that a punishment technology commonly used in experiments embeds a variable fine-to-fee ratio and show that it confounds the empirical findings about why, whom, and how much subjects punish.

Competition with forward contracts: a laboratory analysis motivated by electricity market design

We use experiments to study the efficiency effects for a market as a whole of adding the possibility of forward contracting to a pre-existing spot market. We deal separately with the cases where spot market competition is in quantities and where it is in supply functions. In both cases we compare the effect of adding a contract market with the introduction of an additional competitor, changing the market structure from a triopoly to a quadropoly. We find that, as theory suggests, for both types of competition the introduction of a forward market significantly lowers prices. The combination of supply function competition with a forward market leads to high efficiency levels.

1st National Accessiblity Plan 2004-2012: achieving equal opportunities and full participation through design for all

According to official statistics, disabled people in Spain number 3.5 million and make up 8.8% of the Spanish population. This group of people are increasingly being recognised as members of society with equal rights, and many of their demands are gradually being transformed into solutions that benefit society as a whole. One example is improved accessibility. Accessible built environments are more human and inclusive places, as well as being easier to get around. Improved accessibility is now recognised as a requirement shared by all members of society, although it is achieved thanks to the demands of disabled people and their representatives. The 1st National Accessibility Plan is a strategic framework for action aimed at ensuring that new products, services and built environments are designed to be accessible for as many people as possible (Design for All) and that existing ones are gradually duly adapted.

From creative ideas to new emerging ventures: the process of identification and exploitation among finnish design entrepreneurs

This study focuses on identification and exploitation processes among Finnish design entrepreneurs (i.e. selfemployed industrial designers). More specifically, this study strives to find out what design entrepreneurs do when they create new ventures, how venture ideas are identified and how entrepreneurial processes are organized to identify and exploit such venture ideas in the given industrial context. Indeed, what does educated and creative individuals do when they decide to create new ventures, where do the venture ideas originally come from, and moreover, how are venture ideas identified and developed into viable business concepts that are introduced on the markets? From an academic perspective: there is a need to increase our understanding of the interaction between the identification and exploitation of emerging ventures, in this and other empirical contexts. Rather than assuming that venture ideas are constant in time, this study examines how emerging ideas are adjusted to enable exploitation in dynamic market settings. It builds on the insights from previous entrepreneurship process research. The interpretations from the theoretical discussion build on the assumption that the subprocesses of identification and exploitation interact, and moreover, they are closely entwined with each other (e.g. McKelvie & Wiklund, 2004, Davidsson, 2005). This explanation challenges the common assumption that entrepreneurs would first identify venture ideas and then exploit them (e.g. Shane, 2003). The assumption is that exploitation influences identification, just as identification influences exploitation. Based on interviews with design entrepreneurs and external actors (e.g. potential customers, suppliers and collaborators), it appears as identification and exploitation of venture ideas are carried out in close interaction between a number of actors, rather than alone by entrepreneurs. Due to their available resources, design entrepreneurs have a desire to focus on identification related activities and to find external actors that take care of exploitation related activities. The involvement of external actors may have a direct impact on decisionmaking and various activities along the processes of identification and exploitation, which is something that previous research does not particularly emphasize. For instance, Bhave (1994) suggests both operative and strategic feedback from the market, but does not explain how external parties are actually involved in the decisionmaking, and in carrying out various activities along the entrepreneurial process.

Limited liability and mechanism design in procurement

In the presence of cost uncertainty, limited liability introduces the possibility of default in procurement with its associated bank-ruptcy costs. When financial soundness is not perfectly observable, we show that incentive compatibility implies that financially less sound contractors are selected with higher probability in any feasible mechanism. Informational rents are associated with unsound financial situations. By selecting the financially weakest contractor, stronger price competition (auctions) may not only increase the probability of default but also expected rents. Thus, weak conditions are suffcient for auctions to be suboptimal. In particular, we show that pooling firms with higher assets may reduce the cost of procurement even when default is costless for the sponsor.

La paletina: un pinzell pla i prim

Treball de recerca realitzat per una alumna d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. L’origen de l’autora és la Sénia, un poble d'uns 6000 habitants de la província de Tarragona, on, tot i el predomini actual de la fabricació de mobles, les primeres mostres d'industrialització foren el paper i els pinzells. L’arrelament de la indústria pinzellera de la seva família, ha estat el motiu que l’ha portat a desenvolupar aquest treball sobre la paletina, un tipus de pinzell. L'objectiu del treball ha estat dissenyar un model de paletina, a partir de proves pràctiques i d'estudis estadístics sobre quins són els components més adients. En primer lloc, es fa una descripció detallada dels components de la paletina. A continuació, s’estudia el seu procés de fabricació, primer des del punt de vista manual i després d'acord amb els procediments moderns. Finalment, a partir d'un experiment i amb el corresponent estudi estadístic, s’arriba a una nova proposta de paletina amb unes condicions òptimes de qualitat i rendiment. A més també es descriu el procés de fabricació de la paletina que es duia a terme uns cinquanta anys enrere i es pot valorar, així, tant el mèrit del procés en aquella època com també l'evolució tecnològica que s'ha dut a terme fins al moment.

Creació d'una ràdio musical participativa amb difusió online i FM

Aquest projecte té com a propòsit crear una ràdio musical participativa amb difusió online i FM on a partir d’una interfície web l’usuari pugui participar-hi activament votant les cançons que hi sonaran. A més a més els usuaris registrats gaudiran d’una xarxa social on podran fer amistats i deixa’ls-hi comentaris. Primer de tot faig una ràpida introducció a l’estat de l’art de les ràdios actuals, a continuació analitzo els requeriments, especifico el comportament desitjat del sistema, explico detalladament el disseny i l’ implementació i, per últim, faig un seguit de proves de les quals n’extrec les conclusions.

Anàlisi, disseny i construcció d'un robot educatiu basat en microcontrolador AVR-ATMEGA

Aquest projecte presenta el disseny, construcció i programació d’un robot autònom, com a base per una proposta educativa. Per aconseguir aquest objectiu s’ha dotat el robot d’una unitat de procés, un sistema de locomoció i un seguit de sensors que proporcionaran a la unitat informació respecte l’entorn. Per gestionar totes aquestes funcionalitats, s’ha fet servir un sistema operatiu en temps real capaç de gestionar amb efectivitat les tasques que puguin ser executades pel robot. Finalment, s’ha exposat una detallada descripció dels costos per una producció de volum mig i de caire merament educatiu.

The Design and efficiency of loyalty rewards

The goal of this paper is to reexamine the optimal design and efficiency of loyalty rewards in markets for final consumption goods. While the literature has emphasized the role of loyalty rewards as endogenous switching costs (which distort the efficient allocation of consumers), in this paper I analyze the ability of alternative designs to foster consumer participation and increase total surplus. First, the efficiency of loyalty rewards depend on their specific design. A commitment to the price of repeat purchases can involve substantial efficiency gains by reducing price-cost margins. However, discount policies imply higher future regular prices and are likely to reduce total surplus. Second, firms may prefer to set up inefficient rewards (discounts), especially in those circumstances where a commitment to the price of repeat purchases triggers Coasian dynamics.

Explanatory factors of CO2 per capita emission inequality in the European Union

The design of European mitigation policies requires a detailed examination of the factors explaining the unequal emissions in the different countries. This research analyzes the evolution of inequality in CO2 per capita emissions in the European Union (EU-27) in the 1990-2006 period and its explanatory factors. For this purpose, we decompose the Theil index of inequality into the contributions of the different Kaya factors. The decomposition is also applied to the inequality between and within groups of countries (North Europe, South Europe, and East Europe). The analysis shows an important reduction in inequality, to a large extent due to the smaller differences between groups and because of the lower contribution of the energy intensity factor. The importance of the GDP per capita factor increases and becomes the main explanatory factor. However, within the different groups of countries the carbonization index appears to be the most relevant factor in explaining inequalities.

Design of Novel Frequency Generation Circuit with Application to Ultra-Wideband Distributed Oscillators

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.

Aplicació per a la sol·licitud de recursos informàtics

L'objectiu d'aquest treball és l'exposició detallada de les etapes d'anàlisi, disseny i prototip del projecte de Sol·licituds de Recursos Informàtics. La finalitat d'aquest projecte és la creació d'una eina colaborativa de workflow (circuit de treball) que permeti gestionar de manera eficaç les peticions de serveis o productes rebudes pel departament de tecnologies d'una empresa mitjana/gran, informant en cada moment del seu cicle de vida les persones involucrades en la mateixa.