Five years of sleep apnea treatment with a mandibular advancement device. Side effects and technical complications

Objective: To determine the variation in prevalence of temporomandibular disorders (TMD), other side effects, and technical complications during 5 years of sleep apnea treatment with a mandibular advancement device. Materials and Methods: Forty patients diagnosed with obstructive sleep apnea received an adjustable appliance at 70% of the maximum protrusion. The protrusion was then progressively increased. TMD (diagnosed according to the Research Diagnostic Criteria for TMD), overjet, overbite, occlusal contacts, subjective side effects, and technical complications were recorded before and a mean of 14, 21, and 58 months after treatment and analyzed by the Wilcoxon test (P Less-than .05). Results: Fifteen patients still used the oral appliance at the 5-year follow-up, and no significant variation in TMD prevalence was observed. Subjective side effects were common, and a significant reduction was found in overjet, overbite, and in the number of occlusal contacts. Furthermore, the patients made a mean of 2.5 unscheduled dental visits per year and a mean of 0.8 appliance repairs/relines per year by a dental technician. The most frequent unscheduled visits were needed during the first year and were a result of acrylic breakage on the lateral telescopic attachment, poor retention, and other adjustments to improve comfort. Conclusions: Five-year oral appliance treatment does not affect TMD prevalence but is associated with permanent occlusal changes in most sleep apnea patients during the first 2 years. Patients seek several unscheduled visits, mainly because of technical complications.

Oral pathogens in duwl's: risk of infection and strategies for their control

Water lines are an important source of potentíal contamination. Every dental unit is equipped with small-bore flexible plastic tubing to bring water to different hand pieces, such as the air/water syringe, the ultrasonic scaler or the high-speed hand piece. Most dental units are connected directly to municipal distribution systems for potable water and chlorinated or not, this water contains diverse...

Reflexiones a la técnica de instrumentación rotatoria y aplicación clínica del HERO 642

El auge de las técnicas mecánicas, mediante rotación continua, en la preparación del sistema de conductos radiculares obliga a realizar una serie de reflexiones respecto a las ventajas e inconvenientes de las mismas según los diferentes objetivos que se persiguen en esta fase de la terapéutica. Se describe el sistema de instrumentación HERO 642 comparado con otras marcas y se expone la técnica propugnada por los diseñadores, Vulcain JM y Calas P, junto con las modificaciones propuestas por los autores del artículo. Finalmente, se establecen unas premisas fundamentales para el correcto empleo de la instrumentación rotatoria como técnica habitual en el tratamiento de conductos radiculares, en comparación con otros sistemas.

Enrichment cultures should be performed in the detection of bacterial oral human pathogens in DUWLs

Water delivered by dental units during routine dental practice is densely contaminated by bacteria. The aim of this study was to determine actual isolation of the microorganisms sprayed from Dental Unit Water Lines (DUWLs) when enrichment cultures are performed and to compare frequencies with those obtained without enrichment cultures. Moreover, the antimicrobial susceptibilities of the microorganisms isolated were also studied. Water samples were collected from one hundred dental equipments in use at Dental Hospital of our University in order to evaluate the presence/absence of microorganisms and to perform their presumptive identification. Aliquots from all of the samples were inoculated in eight different media including both enrichment and selective media. Minimal inhibitory concentrations (MIC) were determined by the broth dilution method. The results herein reported demonstrate that most of the DUWLs were colonized by bacteria from human oral cavity; when enrichment procedures were applied the percentage of DUWLs with detectable human bacteria was one hundred percent. The results showed that in order to evaluate the actual risk of infections spread by DUWLs the inclusion of a step of pre-enrichment should be performed. The need for devices preventing bacterial contamination of DUWLs is a goal to be achieved in the near future that would contribute to maintain safety in dental medical assistance

Probabilistic models to assist maintenance of multiple instruments

The paper discusses maintenance challenges of organisations with a huge number of devices and proposes the use of probabilistic models to assist monitoring and maintenance planning. The proposal assumes connectivity of instruments to report relevant features for monitoring. Also, the existence of enough historical registers with diagnosed breakdowns is required to make probabilistic models reliable and useful for predictive maintenance strategies based on them. Regular Markov models based on estimated failure and repair rates are proposed to calculate the availability of the instruments and Dynamic Bayesian Networks are proposed to model cause-effect relationships to trigger predictive maintenance services based on the influence between observed features and previously documented diagnostics

A comparison of the dental status and treatment needs of older adults with and without chronic mental illness in Sevilla, Spain

Objectives: To study the dental status and treatment needs of institutionalized older adults with chronic mental illness compared to a non-psychiatric control sample. Study Design: The sample size was 100, in which 50 were psychogeriatric patients (study group; SG) classified according to DSM-IV, with a mean age of 69.6 ± 6.7 years, and 50 non-psychiatric patients (control group; CG), with a mean age of 68.3 ± 6.9 years. Clinical oral health examinations were conducted and caries were recorded clinically using the Decayed, Missing and Filled Teeth Index (DMFT). Results were analyzed statistically using the Student"s t-test or analysis of variance. Results: Caries prevalence was 58% and 62% in SG and CG, respectively. DMFT index was 28.3 ± 6.6 in SG and 21.4 ± 6.07 in CG (p < 0.01). Mean number of decayed teeth was higher in SG (3.1) compared to CG (1.8) (p=0.047). Mean number of missing teeth were 25.2 and 16.4 in SG and CG respectively (p<0.05). DMFT scores were higher in SG in all the age groups (p < 0.01). Mean number of teeth per person needing treatment was 3.4 in SG and 1.9 in CG (p= 0.037). The need for restorative dental care was significantly lower in the SG (0.8 teeth per person) than in the CG (1.7 teeth per person) (p = 0.043). Conclusions: Institutionalized psychiatric patients have significantly worse dental status and more dental treatment needs than non-psychiatric patients.

Buccal dental microwear and stable isotopes of El Collado: A mesolithic site from Spain,

This study examines the correlation between buccal dental microwear and stable isotopes. The buccal surface of post-canine teeth casts from El Collado, the largest Mesolithic site in Spain, were examined under Scanning Electron Microscope; photomicrographs were taken from the middle third of the buccal surface with magnification 100X. Only six individuals passed the criteria for buccal dental microwear analysis. The photomicrographs were treated by adobe Photoshop 8.01 to cover an area 0.56 mm² of middle third of buccal surface, the output photomicrographs were digitized using Sigmascan Pro 5 by SPSS. Then the correlation between buccal microwear pattern and stable isotopes of the same individuals, of the previous study of Guixe et al., 2006, was examined using a Pearson test. Statistical analysis revealed that there is no significant correlation between stable isotopes and buccal dental microwear of the people of the Mesolithic site of El Collado. The historical and archaeological documentation suggest that the Mesolithic people tended to consume marine food. Fish-drying techniques were used during the Mesolithic period which allowed the introduction of dust and sand to the fish. These abrasive particles affected the buccal dental microwear pattern, so that no correlation between the isotopes and microwear may be expected. This also suggests that the buccal dental microwear pattern exceeds dietary reconstruction to reconstruct food processing techniques.

Buccal dental microwear and stable isotopes of El Collado: A mesolithic site from Spain,

This study examines the correlation between buccal dental microwear and stable isotopes. The buccal surface of post-canine teeth casts from El Collado, the largest Mesolithic site in Spain, were examined under Scanning Electron Microscope; photomicrographs were taken from the middle third of the buccal surface with magnification 100X. Only six individuals passed the criteria for buccal dental microwear analysis. The photomicrographs were treated by adobe Photoshop 8.01 to cover an area 0.56 mm² of middle third of buccal surface, the output photomicrographs were digitized using Sigmascan Pro 5 by SPSS. Then the correlation between buccal microwear pattern and stable isotopes of the same individuals, of the previous study of Guixe et al., 2006, was examined using a Pearson test. Statistical analysis revealed that there is no significant correlation between stable isotopes and buccal dental microwear of the people of the Mesolithic site of El Collado. The historical and archaeological documentation suggest that the Mesolithic people tended to consume marine food. Fish-drying techniques were used during the Mesolithic period which allowed the introduction of dust and sand to the fish. These abrasive particles affected the buccal dental microwear pattern, so that no correlation between the isotopes and microwear may be expected. This also suggests that the buccal dental microwear pattern exceeds dietary reconstruction to reconstruct food processing techniques.

Swarm Intelligent Selection and Optimization of Machining System Parameters for Microchannel Fabrication in Medical Devices

Current technology trends in medical device industry calls for fabrication of massive arrays of microfeatures such as microchannels on to nonsilicon material substrates with high accuracy, superior precision, and high throughput. Microchannels are typical features used in medical devices for medication dosing into the human body, analyzing DNA arrays or cell cultures. In this study, the capabilities of machining systems for micro-end milling have been evaluated by conducting experiments, regression modeling, and response surface methodology. In machining experiments by using micromilling, arrays of microchannels are fabricated on aluminium and titanium plates, and the feature size and accuracy (width and depth) and surface roughness are measured. Multicriteria decision making for material and process parameters selection for desired accuracy is investigated by using particle swarm optimization (PSO) method, which is an evolutionary computation method inspired by genetic algorithms (GA). Appropriate regression models are utilized within the PSO and optimum selection of micromilling parameters; microchannel feature accuracy and surface roughness are performed. An analysis for optimal micromachining parameters in decision variable space is also conducted. This study demonstrates the advantages of evolutionary computing algorithms in micromilling decision making and process optimization investigations and can be expanded to other applications

An epidemiological study of dental agenesis in a primary health area in Spain: estimated prevalence and associated factors

Objectives: To evaluate the prevalence of dental agenesis and its possible association with other developmental dental anomalies and systemic entities. Setting and Sample Population: Descriptive transversal study, for which 1518 clinical records, of patients visited by the Odontological Service of the Primary Health Centre of Cassà de la Selva (Girona-Spain) between December 2002 and February 2006 were reviewed. The data were recorded in relation to the oral and dental anomalies and the associated systemic entities, between the ones referred as concomitant in literature. Results: Values of 9.48% (7.25% excluding the third molars) for dental agenesis and 0.39% for oligodontia were obtained. The presence of dental agenesis concomitant with some other forms of oral and dental anomalies was observed. Attention must be drawn to the fact that a greater number of concomitant systemic entities were observed in those patients that presented a severe phenotypical pattern of dental agenesis. Conclusions: The results of the present study do not differ from the ones reported in studies of similar characteristics among Occidental and Spanish populations. The relationship observed between certain systemic entities and developmental dental anomalies suggest a possible common genetic etiology

EU “actorness” in International Relations: The Non-Proliferation Policy of the EU in the Southern Mediterranean

El punt de partida d'aquesta investigació és una retòrica molt utilitzada que la UE és un actor global. En vista d'això, la no proliferació de la política comunitària al sud de la Mediterrània s'examina. L'estudi es realitza sobre la base de la conceptualització de la UE "actorness" ia través d'alguns criteris (context extern, l'evolució de l'aparell de política exterior de la UE, la Unió Europea l'auto-presentació i la percepció de tercers, la consistència i la disponibilitat d'instruments de política i accions concretes) que involucren tant factors ideacionals i materials, d'acord amb el "pluralisme metodològic". Aquest marc conceptual va ajudar a avaluar la no proliferació de la política comunitària en aquesta regió en particular on la UE té interessos i bones raons per actuar. Cada un dels criteris de manifest els avantatges i desavantatges de la UE "actorness" en aquest camp seleccionat i la caixa. Aquest document sosté que la no proliferació "actorness" de la UE a la regió del sud de la Mediterrània ha estat limitat a causa d'una varietat de raons.

Protocol of the COSMIN study: consensus-based standards for the selection of health measurement instruments

Background: Choosing an adequate measurement instrument depends on the proposed use of the instrument, the concept to be measured, the measurement properties (e.g. internal consistency, reproducibility, content and construct validity, responsiveness, and interpretability), the requirements, the burden for subjects, and costs of the available instruments. As far as measurement properties are concerned, there are no sufficiently specific standards for the evaluation of measurement properties of instruments to measure health status, and also no explicit criteria for what constitutes good measurement properties. In this paper we describe the protocol for the COSMIN study, the objective of which is to develop a checklist that contains COnsensus-based Standards for the selection of health Measurement INstruments, including explicit criteria for satisfying these standards. We will focus on evaluative health related patient-reported outcomes (HR-PROs), i.e. patient-reported health measurement instruments used in a longitudinal design as an outcome measure, excluding health care related PROs, such as satisfaction with care or adherence. The COSMIN standards will be made available in the form of an easily applicable checklist.Method: An international Delphi study will be performed to reach consensus on which and how measurement properties should be assessed, and on criteria for good measurement properties. Two sources of input will be used for the Delphi study: (1) a systematic review of properties, standards and criteria of measurement properties found in systematic reviews of measurement instruments, and (2) an additional literature search of methodological articles presenting a comprehensive checklist of standards and criteria. The Delphi study will consist of four (written) Delphi rounds, with approximately 30 expert panel members with different backgrounds in clinical medicine, biostatistics, psychology, and epidemiology. The final checklist will subsequently be field-tested by assessing the inter-rater reproducibility of the checklist.Discussion: Since the study will mainly be anonymous, problems that are commonly encountered in face-to-face group meetings, such as the dominance of certain persons in the communication process, will be avoided. By performing a Delphi study and involving many experts, the likelihood that the checklist will have sufficient credibility to be accepted and implemented will increase.

Surface characterization techniques for determining the root-mean-square roughness and power spectral densities of optical components

Surface topography and light scattering were measured on 15 samples ranging from those having smooth surfaces to others with ground surfaces. The measurement techniques included an atomic force microscope, mechanical and optical profilers, confocal laser scanning microscope, angle-resolved scattering, and total scattering. The samples included polished and ground fused silica, silicon carbide, sapphire, electroplated gold, and diamond-turned brass. The measurement instruments and techniques had different surface spatial wavelength band limits, so the measured roughnesses were not directly comparable. Two-dimensional power spectral density (PSD) functions were calculated from the digitized measurement data, and we obtained rms roughnesses by integrating areas under the PSD curves between fixed upper and lower band limits. In this way, roughnesses measured with different instruments and techniques could be directly compared. Although smaller differences between measurement techniques remained in the calculated roughnesses, these could be explained mostly by surface topographical features such as isolated particles that affected the instruments in different ways.

Buccodental health and oral mucositis. Clinical study in patients with hematological diseases

Objectives: The objective of the present study is to assess whether a good buccodental status (evaluated by means of dentogingival indices), is associated with a lower incidence and severity of oral mucositis in patients with hematological diseases who receive treatment with chemotherapy or bone marrow transplant. Study design: The study was carried out on 97 patients admitted to the Hematology Service of the Hospital Duran y Reynals in Barcelona during 2002-2003. These patients received treatment with chemotherapy or conditioning prior to bone marrow transplant. A descriptive study was made, analyzing oral hygiene, one dental index, and two gingivales indices, and evaluating their relationship with the appearance of mucositis. Results: The patients with high plaque (PI) and gingival (GI) indices during chemotherapy presented a higher percentage of mucositis (77.4% and 65.7% respectively) against those who had little or no visible plaque. In the case of the PI, the differences were statistically significant (p=0.015). Likewise, patients who brushed their teeth 3 times/day presented mucositis in only 26.7% of cases, against those who did not brush, or brushed only once a day (65.9% and 68.4%), these differences also being statistically significant (p=0.013). The CAO showed similar results in patients with or without mucositis (7.59 and 7.03 respectively). Conclusions: In our study, a good gingival status as well as good oral hygiene during chemoradiotherapy is associated with a lower incidence and severity of mucositis.

Identificació de components inclusius en alguns centres escolars d'educació infantil i primària de la comarca d'Osona

The present essay –which is a pilot study conceived to continue the research in depth in the future- is based in a comparative analysis of educational practice between five different primary and pre-school teaching centres in Osona and the educational practice in inclusive educational centres. The essay introduces the objectives of the research and the theoretical and conceptual framework in which it is based (chapter 1) in relation with the main themes and expressions which are the purpose of the study: comprensivity, inclusive school and inclusive practice. The theoretical framework is linked to the principal regulations applied in our context. The study describes the instruments and procedure analysis describes the instruments and procedure analysis which have been designed and used for a qualitative methodological approach, together with the data obtained from the analysis of five teaching centres (chapter 2). The results from the research show that the practice done in the analised schools are not totally comparable to the ones in the inclusive environment. Notwithsanding, there are some similar points, although not totally coincident, like the fact that either the analysed schools or the ones with an inclusive approach show availability and interest in improving integration of all the pupils in the school, also the teachers work together in some aspects like, evaluation of pupils with special needs, objectives and contents and activities fort he specific kind of pupils with special needs parents and the majority of the analyzed schools, like those fallowing inclusive educational approaches, try the pupils with special needs to develop their acquisition within the ordinary class with adapted material. I think, these verifications, some of them close to inclusive educational practice, could constitute a starting point to analyse our model, in order to offer a common curriculum that could respect the different styles and rhythms of acquisition of all the pupils, so that promoting a more flexible and open schooling. In conclusion, the results of this analysis, although dues to its limits, they can not be generalized, they can help to find the necessary changes to bet for a qualitative education in a school for everyone.