Irregular to regular sampling, denoising and deconvolution

We propose a restoration algorithm for band limited images that considers irregular(perturbed) sampling, denoising, and deconvolution. We explore the application of a family ofregularizers that allow to control the spectral behavior of the solution combined with the irregular toregular sampling algorithms proposed by H.G. Feichtinger, K. Gr¨ochenig, M. Rauth and T. Strohmer.Moreover, the constraints given by the image acquisition model are incorporated as a set of localconstraints. And the analysis of such constraints leads to an early stopping rule meant to improvethe speed of the algorithm. Finally we present experiments focused on the restoration of satellite images, where the micro-vibrations are responsible of the type of distortions we are considering here. We will compare results of the proposed method with previous methods and show an extension tozoom.

Polarimetric 3D integral imaging in photon-starved conditions

We develop a method for obtaining 3D polarimetric integral images from elemental images recorded in low light illumination conditions. Since photon-counting images are very sparse, calculation of the Stokes parameters and the degree of polarization should be handled carefully. In our approach, polarimetric 3D integral images are generated using the Maximum Likelihood Estimation and subsequently reconstructed by means of a Total Variation Denoising filter. In this way, polarimetric results are comparable to those obtained in conventional illumination conditions. We also show that polarimetric information retrieved from photon starved images can be used in 3D object recognition problems. To the best of our knowledge, this is the first report on 3D polarimetric photon counting integral imaging.

Stabilized Petrov-Galerkin methods for the convection-diffusion-reaction and the Helmholtz equations

We present two new stabilized high-resolution numerical methods for the convection–diffusion–reaction (CDR) and the Helmholtz equations respectively. The work embarks upon a priori analysis of some consistency recovery procedures for some stabilization methods belonging to the Petrov–Galerkin framework. It was found that the use of some standard practices (e.g. M-Matrices theory) for the design of essentially non-oscillatory numerical methods is not feasible when consistency recovery methods are employed. Hence, with respect to convective stabilization, such recovery methods are not preferred. Next, we present the design of a high-resolution Petrov–Galerkin (HRPG) method for the 1D CDR problem. The problem is studied from a fresh point of view, including practical implications on the formulation of the maximum principle, M-Matrices theory, monotonicity and total variation diminishing (TVD) finite volume schemes. The current method is next in line to earlier methods that may be viewed as an upwinding plus a discontinuity-capturing operator. Finally, some remarks are made on the extension of the HRPG method to multidimensions. Next, we present a new numerical scheme for the Helmholtz equation resulting in quasi-exact solutions. The focus is on the approximation of the solution to the Helmholtz equation in the interior of the domain using compact stencils. Piecewise linear/bilinear polynomial interpolation are considered on a structured mesh/grid. The only a priori requirement is to provide a mesh/grid resolution of at least eight elements per wavelength. No stabilization parameters are involved in the definition of the scheme. The scheme consists of taking the average of the equation stencils obtained by the standard Galerkin finite element method and the classical finite difference method. Dispersion analysis in 1D and 2D illustrate the quasi-exact properties of this scheme. Finally, some remarks are made on the extension of the scheme to unstructured meshes by designing a method within the Petrov–Galerkin framework.

A note on robust detection

We introduce a simple new hypothesis testing procedure, which,based on an independent sample drawn from a certain density, detects which of $k$ nominal densities is the true density is closest to, under the total variation (L_{1}) distance. Weobtain a density-free uniform exponential bound for the probability of false detection.

The persistence of return on assets: differences between industries and differences between firms

This study offers a statistical analysis of the persistence of annual profits across a sample of firms from different European Union (EU) countries. To this end, a Bayesian dynamic model has been used which enables the annual behaviour of those profits to be broken down into a permanent structural component on the one hand and a transitory component on the other, while also distinguishing between general effects affecting the industry as a whole to which each firm belongs and specific effects affecting each firm in particular. This break down enables the relative importance of those fundamental components to be evaluated. The data analysed come from a sample of 23,293 firms in EU countries selected from the AMADEUS data-base. The period analysed ran from 1999 to 2007 and 21 sectors were analysed, chosen in such a way that there was a sufficiently large number of firms in each country*sector combination for the industry effects to be estimated accurately enough for meaningful comparisons to be made by sector and country. The analysis has been conducted by sector and by country from a Bayesian perspective, thus making the study more flexible and realistic since the estimates obtained do not depend on asymptotic results. In general terms, the study finds that, although the industry effects are significant, more important are the specific effects. That importance varies depending on the sector or the country in which the firm carries out its activity. The influence of firm effects accounts for more than 90% of total variation and display a significantly lower degree of persistence, with adjustment speeds oscillating around 51.1%. However, this pattern is not homogeneous but depends on the sector and country analysed. Industry effects have a more marginal importance, being significantly more persistent, with adjustment speeds oscillating around 10% with this degree of persistence being more homogeneous at both country and sector levels.

Distribution Patterns of Soil Properties in a Rural Mediterranean Area in Northeastern Spain

Soil properties on the Cap de Creus Peninsula, NE Spain depend primarily on scarce agricultural practices and early abandonment. In the study area, 90% of which is mainly covered by Cistus shrubs, 8 environments representing variations in land use/land cover and soil properties at different depths were identified. In each environment variously vegetated areas were selected and sampled. The soils, collected at different depths, were classified as Lithic Xerorthents according to the United States Department of Agriculture system of soil classification (USDA-NRCS 1975). Differences in soil properties were largely found according to the evolution of the plant canopy and the land use history. To identify underlying patterns in soil properties related to environmental evolution, factor analysis was performed and factor scores were used to determine how the factor patterns varied between soil variables, soil depths and selected environments. The three-factor model always accounted for 80% of the total variation in the data at the different soil depths. Organic matter was the more relevant soil property at 0–2 cm depth, whereas active minerals (silt and clay) were found to be the most relevant soil parameters controlling soil dynamics at the other depths investigated. Results showed that vineyards and olive tree soils are poorly developed and present worse conditions for mineral and organic compounds. Analysis of factor scores allowed independent assessment of soils, depth and plant cover and demonstrated that soils present the best physico-chemical characteristics under Erica arborea and meadows. In contrast, soils under Cistus monspeliensis were less nutrient rich and less well structured

Weighted approval voting

To allow society to treat unequal alternatives distinctly we propose a natural extension of Approval Voting by relaxing the assumption of neutrality. According to this extension, every alternative receives ex-ante a non-negative and finite weight. These weights may differ across alternatives. Given the voting decisions of every individual (individuals are allowed to vote for, or approve of, as many alternatives as they wish to), society elects all alternatives for which the product of total number of votes times exogenous weight is maximal. Our main result is an axiomatic characterization of this voting procedure.

An analysis of strategic paths through the decomposition of total factor productivity: the case of Spanish savings banks

The Spanish savings banks attracted quite a considerable amount of interest within the scientific arena, especially subsequent to the disappearance of the regulatory constraints during the second decade of the 1980s. Nonetheless, a lack of research identified with respect to mainstream paths given by strategic groups, and the analysis of the total factor productivity. Therefore, on the basis of the resource-based view of the firm and cluster analysis, we make use of changes in structure and performance ratios in order to identify the strategic groups extant in the sector. We attain a threeways division, which we link with different input-output specifications defining strategic paths. Consequently, on the basis of these three dissimilar approaches we compute and decompose a Hicks-Moorsteen total factor productivity index. Obtained results put forward an interesting interpretation under a multi-strategic approach, together with the setbacks of employing cluster analysis within a complex strategic environment. Moreover, we also propose an ex-post method of analysing the outcomes of the decomposed total factor productivity index that could be merged with non-traditional techniques of forming strategic groups, such as cognitive approaches.

The Total fiscal cost of indirect taxation: an approximation using Catalonia's recent input-output table

In this note we quantify to what extent indirect taxation influences and distorts prices. To do so we use the networked accounting structure of the most recent input-output table of Catalonia, an autonomous region of Spain, to model price formation. The role of indirect taxation is considered both from a classical value perspective and a more neoclassical flavoured one. We show that they would yield equivalent results under some basic premises. The neoclassical perspective, however, offers a bit more flexibility to distinguish among different tax figures and hence provide a clearer disaggregate picture of how an indirect tax ends up affecting, and by how much, the cost structure.

Decomposing differences in total factor productivity across firm size

This paper investigates the extent to which the gap in total factor productivity between small and large firms is due to differences in the endowment of factors determining productivity and to the returns associated with these factors. We place particular emphasis on the contribution of differences in the propensity to innovate and in the use of skilled labor across firms of different size. Empirical evidence from a representative sample of Spanish manufacturing firms corroborates that both differences in endowments and returns to innovation and skilled labor significantly contribute to the productivity gap between small and large firms. In addition, it is observed that the contribution of innovation to this gap is caused only by differences in quantity, while differences in returns have no effect; in the case of human capital, however, most of the effect can be attributed to increasing differences in returns between small and large firms.

Influencia del diseño de alta flexión, con conservación del LCP, en el rango de movimiento tras la implantación de una prótesis total de rodilla

Els nous implants de genoll pretenen millorar la flexió màxima aconseguida amb els implants convencionals. El nostre estudi pretén demostrar que els pacients intervinguts quirúrgicament, per a la implantació d’una artroplàstia total de genoll d’alta flexió, són capaços d’aconseguir un balanç articular i una flexió màxima superior a l’aconseguida pels pacients tractats amb el model convencional. La flexió màxima post-operatòria, a l’any de la intervenció, va ser 13º major en el grup de pacients portadors d’un implant d’alta flexió, respecte al grup de pacients portadors d’un implant convencional. (P & 0,05).

Paratirina intacta a las 24 horas de la tiroidectomía total.Valor predictivo de hipoparatiroidismo definitivo

Estudio clínico prospectivo de 70 pacientes sometidos a tiroidectomía total (TT) El objetivo del estudio es analizar el valor de la determinación de paratirina (PTHi) a las 24 horas de la TT como indicador de riesgo de hipoparatiroidismo definitivo. Cuarenta y cuatro pacientes (62,9%) presentaron hipocalcemia y 27 (38,6%) una deficiencia de PTHi a las 24 h de la TT. Una concentración de PTHi a las 24 h postTT 5,8 pg/mL predice con una sensibilidad del 100% y una especificidad del 81,5% la evolución a hipoparatiroidismo definitivo, con un valor predictivo negativo del 100%. Estudi clínic prospectiu de 70 pacients sotmesos a tiroïdectomia total (TT). L’objectiu de l’estudi és analitzar el valor de la determinació de paratirina (PTHi) a les 24 hores de la TT com a indicador de risc d’hipoparatiroïdisme definitiu. Quaranta-quatre pacients (62,9%) presentaren hipocalcèmia i 27 (38,6%) una deficiència de PTHi a les 24 hores de la TT. Una concentración de PTHi a les 24 h postTT 5,8 pg/mL prediu amb una sensibilitat del 100% i una especificitat del 81,5% l’evolució a hipoparatiroïdisme definitiu, amb un valor predictiu negatiu del 100%.

Relació de l’aspecte de la ferida quirúrgica en el postoperatori immediat d’una artroplàstia total de genoll amb l’evolució funcional posterior

Mitjançant un estudi observacional prospectiu, hem descrit i classificat la ferida quirúrgica en el postoperatori immediat de 159 pacients que se’ls hi va implantar una artroplàstia total de genoll, mitjançant una escala descriptiva fiable i reproduïble creada pels autors (estudi de validesa). Es va observar que l’aspecte de la ferida quirúrgica en el postoperatori immediat no tenia relació amb la funcionalitat de la pròtesis als 6 mesos de seguiment ni amb el dolor que patia el pacient en l’estància hospitalària. Si que vam observar correlació estadísticament significativa entre el pitjor aspecte de la ferida i l’aparició d’infeccions protèsiques profundes.

Cuantificación de las partículas de polietileno en líquido sinovial tras artroplastia total de rodilla, utilizando un polietileno convencional o uno altamente entrecruzado: estudio preliminar y protocolo de estudio

La formació de partícules de polietilè és la principal causa de osteòlisi i per tant de fracàs a l’artroplàstia total de genoll. El nostre objectiu és comparar, in vivo, el nombre de partícules que es formen amb un polietilè convencional amb un altament entrecreuat, esperant que el segon cas el nombre sigui més petit. Utilitzem una tècnica de aïllament de partícules en líquid sinovial ja descrita, que reproduïm a l’estudi preliminar. Presentem un protocol d’estudi prospectiu a doble cec, on s’estudiaran pacients amb artroplàstia de genoll d’un any d’evolució.