Bandwidth allocation based on real time calculations using the convolution approach

This paper focuses on one of the methods for bandwidth allocation in an ATM network: the convolution approach. The convolution approach permits an accurate study of the system load in statistical terms by accumulated calculations, since probabilistic results of the bandwidth allocation can be obtained. Nevertheless, the convolution approach has a high cost in terms of calculation and storage requirements. This aspect makes real-time calculations difficult, so many authors do not consider this approach. With the aim of reducing the cost we propose to use the multinomial distribution function: the enhanced convolution approach (ECA). This permits direct computation of the associated probabilities of the instantaneous bandwidth requirements and makes a simple deconvolution process possible. The ECA is used in connection acceptance control, and some results are presented

Fast calculation of the CAC convolution algorithm using the multinomial distribution function

The authors focus on one of the methods for connection acceptance control (CAC) in an ATM network: the convolution approach. With the aim of reducing the cost in terms of calculation and storage requirements, they propose the use of the multinomial distribution function. This permits direct computation of the associated probabilities of the instantaneous bandwidth requirements. This in turn makes possible a simple deconvolution process. Moreover, under certain conditions additional improvements may be achieved

The underestimation of compliance to direct help requests explained by adaptive sampling

Helping behavior is any intentional behavior that benefits another living being or group (Hogg & Vaughan, 2010). People tend to underestimate the probability that others will comply with their direct requests for help (Flynn & Lake, 2008). This implies that when they need help, they will assess the probability of getting it (De Paulo, 1982, cited in Flynn & Lake, 2008) and then they will tend to estimate one that is actually lower than the real chance, so they may not even consider worth asking for it. Existing explanations for this phenomenon attribute it to a mistaken cost computation by the help seeker, who will emphasize the instrumental cost of “saying yes”, ignoring that the potential helper also needs to take into account the social cost of saying “no”. And the truth is that, especially in face-to-face interactions, the discomfort caused by refusing to help can be very high. In short, help seekers tend to fail to realize that it might be more costly to refuse to comply with a help request rather than accepting. A similar effect has been observed when estimating trustworthiness of people. Fetchenhauer and Dunning (2010) showed that people also tend to underestimate it. This bias is reduced when, instead of asymmetric feedback (getting feedback only when deciding to trust the other person), symmetric feedback (always given) was provided. This cause could as well be applicable to help seeking as people only receive feedback when they actually make their request but not otherwise. Fazio, Shook, and Eiser (2004) studied something that could be reinforcing these outcomes: Learning asymmetries. By means of a computer game called BeanFest, they showed that people learn better about negatively valenced objects (beans in this case) than about positively valenced ones. This learning asymmetry esteemed from “information gain being contingent on approach behavior” (p. 293), which could be identified with what Fetchenhauer and Dunning mention as ‘asymmetric feedback’, and hence also with help requests. Fazio et al. also found a generalization asymmetry in favor of negative attitudes versus positive ones. They attributed it to a negativity bias that “weights resemblance to a known negative more heavily than resemblance to a positive” (p. 300). Applied to help seeking scenarios, this would mean that when facing an unknown situation, people would tend to generalize and infer that is more likely that they get a negative rather than a positive outcome from it, so, along with what it was said before, people will be more inclined to think that they will get a “no” when requesting help. Denrell and Le Mens (2011) present a different perspective when trying to explain judgment biases in general. They deviate from the classical inappropriate information processing (depicted among other by Fiske & Taylor, 2007, and Tversky & Kahneman, 1974) and explain this in terms of ‘adaptive sampling’. Adaptive sampling is a sampling mechanism in which the selection of sample items is conditioned by the values of the variable of interest previously observed (Thompson, 2011). Sampling adaptively allows individuals to safeguard themselves from experiences they went through once and turned out to lay negative outcomes. However, it also prevents them from giving a second chance to those experiences to get an updated outcome that could maybe turn into a positive one, a more positive one, or just one that regresses to the mean, whatever direction that implies. That, as Denrell and Le Mens (2011) explained, makes sense: If you go to a restaurant, and you did not like the food, you do not choose that restaurant again. This is what we think could be happening when asking for help: When we get a “no”, we stop asking. And here, we want to provide a complementary explanation for the underestimation of the probability that others comply with our direct help requests based on adaptive sampling. First, we will develop and explain a model that represents the theory. Later on, we will test it empirically by means of experiments, and will elaborate on the analysis of its results.

Evidence on the determinants of foreign direct investment: the case of three european regions

This study aims at analyzing the determinants of FDI (foreign direct investment) inflows for a group of European regions. The originality of this approach lies in the use of disaggregated regional data. First, we develop a qualitative description of our database and discuss the importance of the macroeconomic determinants in attracting FDI. Then, we provide an econometric exercise to identify the potential determinants of FDI. In spite of choosing regions presenting economic similarities, we show that regional FDI inflows rely on a combination of factors that differs from one region to another.

Computation of an integral basis of a quartic number field

"Vegeu el resum a l'inici del document del fitxer adjunt."

Computation of an integral basis of quartic number field

"Vegeu el resum a l'inici del document del fitxer ajunt."

Fast numerical algorithms for the computation of invariant tori in Hamiltonian systems

In this paper, we develop numerical algorithms that use small requirements of storage and operations for the computation of invariant tori in Hamiltonian systems (exact symplectic maps and Hamiltonian vector fields). The algorithms are based on the parameterization method and follow closely the proof of the KAM theorem given in [LGJV05] and [FLS07]. They essentially consist in solving a functional equation satisfied by the invariant tori by using a Newton method. Using some geometric identities, it is possible to perform a Newton step using little storage and few operations. In this paper we focus on the numerical issues of the algorithms (speed, storage and stability) and we refer to the mentioned papers for the rigorous results. We show how to compute efficiently both maximal invariant tori and whiskered tori, together with the associated invariant stable and unstable manifolds of whiskered tori. Moreover, we present fast algorithms for the iteration of the quasi-periodic cocycles and the computation of the invariant bundles, which is a preliminary step for the computation of invariant whiskered tori. Since quasi-periodic cocycles appear in other contexts, this section may be of independent interest. The numerical methods presented here allow to compute in a unified way primary and secondary invariant KAM tori. Secondary tori are invariant tori which can be contracted to a periodic orbit. We present some preliminary results that ensure that the methods are indeed implementable and fast. We postpone to a future paper optimized implementations and results on the breakdown of invariant tori.

Optimització i implementació en Simulink de l'adquisició d'un senyal GPS amb blocs FFT

Aquest projecte es tracta de la optimització i la implementació de l’etapa d’adquisició d’un receptor GPS. També inclou una revisió breu del sistema GPS i els seus principis de funcionament. El procés d’adquisició s’ha estudiat amb detall i programat en els entorns de treball Matlab i Simulink. El fet d’implementar aquesta etapa en dos entorns diferents ha estat molt útil tant de cara a l’aprenentatge com també per la comprovació dels resultats obtinguts. El principal objectiu del treball és el disseny d’un model Simulink que es capaç d’adquirir una senyal capturada amb hardware real. En realitat, s’han fet dues implementacions: una que utilitza blocs propis de Simulink i l’altra que utilitza blocs de la llibreria Xilinx. D’aquesta manera, posteriorment, es facilitaria la transició del model a la FPGA utilitzant l’entorn ISE de Xilinx. La implementació de l’etapa d’adquisició es basa en el mètode de cerca de fase de codi en paral·lel, el qual empra la operació correlació creuada mitjançant la transformada ràpida de Fourier (FFT). Per aquest procés es necessari realitzar dues transformades (per a la senyal entrant i el codi de referència) i una antitransformada de Fourier (per al resultat de la correlació). Per tal d’optimitzar el disseny s’utilitza un bloc FFT, ja que tres blocs consumeixen gran part dels recursos d’una FPGA. En lloc de replicar el bloc FFT, en el model el bloc és compartit en el temps gràcies a l’ús de buffers i commutadors, com a resultat la quantitat de recursos requerits per una implementació en una FPGA es podria reduir considerablement.

The nature of the Cr-C bond: direct estimation of aromaticity in Fischer carbenes

Report for the scientific sojourn at the the Philipps-Universität Marburg, Germany, from september to december 2007. For the first, we employed the Energy-Decomposition Analysis (EDA) to investigate aromaticity on Fischer carbenes as it is related through all the reaction mechanisms studied in my PhD thesis. This powerful tool, compared with other well-known aromaticity indices in the literature like NICS, is useful not only for quantitative results but also to measure the degree of conjugation or hyperconjugation in molecules. Our results showed for the annelated benzenoid systems studied here, that electron density is more concentrated on the outer rings than in the central one. The strain-induced bond localization plays a major role as a driven force to keep the more substituted ring as the less aromatic. The discussion presented in this work was contrasted at different levels of theory to calibrate the method and ensure the consistency of our results. We think these conclusions can also be extended to arene chemistry for explaining aromaticity and regioselectivity reactions found in those systems.In the second work, we have employed the Turbomole program package and density-functionals of the best performance in the state of art, to explore reaction mechanisms in the noble gas chemistry. Particularly, we were interested in compounds of the form H--Ng--Ng--F (where Ng (Noble Gas) = Ar, Kr and Xe) and we investigated the relative stability of these species. Our quantum chemical calculations predict that the dixenon compound HXeXeF has an activation barrier for decomposition of 11 kcal/mol which should be large enough to identify the molecule in a low-temperature matrix. The other noble gases present lower activation barriers and therefore are more labile and difficult to be observable systems experimentally.

Straightening out the concept of direct and indirect input requirements

Gim & Kim (1998) proposed a generalization of Jeong (1982, 1984) reinterpretation of the Hawkins-Simon condition for macroeconomic stability to off-diagonal matrix elements. This generalization is conceptually relevant for it offers a complementary view of interindustry linkages beyond final or net output influence. The extension is completely similar to the 'total flow' idea introduced by Szyrmer (1992) or the 'output-to-output' multiplier of Miller & Blair (2009). However the practical implementation of Gim & Kim is actually faulty since it confuses the appropriate order of output normalization. We provide a new and elementary solution for the correct formalization using standard interindustry accounting concepts.

A compositional data analysis package for R providing multiple approaches

”compositions” is a new R-package for the analysis of compositional and positive data.It contains four classes corresponding to the four different types of compositional andpositive geometry (including the Aitchison geometry). It provides means for computation,plotting and high-level multivariate statistical analysis in all four geometries.These geometries are treated in an fully analogous way, based on the principle of workingin coordinates, and the object-oriented programming paradigm of R. In this way,called functions automatically select the most appropriate type of analysis as a functionof the geometry. The graphical capabilities include ternary diagrams and tetrahedrons,various compositional plots (boxplots, barplots, piecharts) and extensive graphical toolsfor principal components. Afterwards, ortion and proportion lines, straight lines andellipses in all geometries can be added to plots. The package is accompanied by ahands-on-introduction, documentation for every function, demos of the graphical capabilitiesand plenty of usage examples. It allows direct and parallel computation inall four vector spaces and provides the beginner with a copy-and-paste style of dataanalysis, while letting advanced users keep the functionality and customizability theydemand of R, as well as all necessary tools to add own analysis routines. A completeexample is included in the appendix

Towards Direct Policy Search Reinforcement Learning for Robot Control

This paper proposes a high-level reinforcement learning (RL) control system for solving the action selection problem of an autonomous robot. Although the dominant approach, when using RL, has been to apply value function based algorithms, the system here detailed is characterized by the use of direct policy search methods. Rather than approximating a value function, these methodologies approximate a policy using an independent function approximator with its own parameters, trying to maximize the future expected reward. The policy based algorithm presented in this paper is used for learning the internal state/action mapping of a behavior. In this preliminary work, we demonstrate its feasibility with simulated experiments using the underwater robot GARBI in a target reaching task

Omnidirectional Depth Computation from a Single Image

Omnidirectional cameras offer a much wider field of view than the perspective ones and alleviate the problems due to occlusions. However, both types of cameras suffer from the lack of depth perception. A practical method for obtaining depth in computer vision is to project a known structured light pattern on the scene avoiding the problems and costs involved by stereo vision. This paper is focused on the idea of combining omnidirectional vision and structured light with the aim to provide 3D information about the scene. The resulting sensor is formed by a single catadioptric camera and an omnidirectional light projector. It is also discussed how this sensor can be used in robot navigation applications