Probabilistic models to assist maintenance of multiple instruments

The paper discusses maintenance challenges of organisations with a huge number of devices and proposes the use of probabilistic models to assist monitoring and maintenance planning. The proposal assumes connectivity of instruments to report relevant features for monitoring. Also, the existence of enough historical registers with diagnosed breakdowns is required to make probabilistic models reliable and useful for predictive maintenance strategies based on them. Regular Markov models based on estimated failure and repair rates are proposed to calculate the availability of the instruments and Dynamic Bayesian Networks are proposed to model cause-effect relationships to trigger predictive maintenance services based on the influence between observed features and previously documented diagnostics

Nanomotors: new strategies of (bio)sensing based on motion

Nanomotors are nanoscale devices capable of converting energy into movement and forces. Among them, self-propelled nanomotors offer considerable promise for developing new and novel bioanalytical and biosensing strategies based on the direct isolation of target biomolecules or changes in their movement in the presence of target analytes. The mainachievements of this project consists on the development of receptor-functionalized nanomotors that offer direct and rapid target detection, isolation and transport from raw biological samples without preparatory and washing steps. For example, microtube engines functionalized with aptamer, antibody, lectin and enzymes receptors were used for the direct isolation of analytes of biomedical interest, including proteins and whole cells, among others. A target protein was also isolated from a complex sample by using an antigen-functionalized microengine navigating into the reservoirs of a lab-on-a-chip device. The new nanomotorbased target biomarkers detection strategy not only offers highly sensitive, rapid, simple and low cost alternative for the isolation and transport of target molecules, but also represents a new dimension of analytical information based on motion. The recognition events can be easily visualized by optical microscope (without any sophisticated analytical instrument) to reveal the target presence and concentration. The use of artificial nanomachines has shown not only to be useful for (bio)recognition and (bio)transport but also for detection of environmental contamination and remediation. In this context, micromotors modified with superhydrophobic layer demonstrated that effectively interacted, captured, transported and removed oil droplets from oil contaminated samples. Finally, a unique micromotor-based strategy for water-quality testing, that mimics live-fish water-quality testing, based on changes in the propulsion behavior of artificial biocatalytic microswimmers in the presence of aquatic pollutants was also developed. The attractive features of the new micromachine-based target isolation and signal transduction protocols developed in this project offer numerous potential applications in biomedical diagnostics, environmental monitoring, and forensic analysis.

BIMS: Biomedical Information Management System

This final year project presents the design principles and prototype implementation of BIMS (Biomedical Information Management System), a flexible software system which provides an infrastructure to manage all information required by biomedical research projects.The BIMS project was initiated with the motivation to solve several limitations in medical data acquisition of some research projects, in which Universitat Pompeu Fabra takes part. These limitations,based on the lack of control mechanisms to constraint information submitted by clinicians, impact on the data quality, decreasing it.BIMS can easily be adapted to manage information of a wide variety of clinical studies, not being limited to a given clinical specialty. The software can manage both, textual information, like clinical data (measurements, demographics, diagnostics, etc ...), as well as several kinds of medical images (magnetic resonance imaging, computed tomography, etc ...). Moreover, BIMS provides a web - based graphical user interface and is designed to be deployed in a distributed andmultiuser environment. It is built on top of open source software products and frameworks.Specifically, BIMS has been used to represent all clinical data being currently used within the CardioLab platform (an ongoing project managed by Universitat Pompeu Fabra), demonstratingthat it is a solid software system, which could fulfill requirements of a real production environment.

Back to square one: Identification issues in DSGE models

We investigate identifiability issues in DSGE models and their consequences for parameter estimation and model evaluation when the objective function measures the distance between estimated and model impulse responses. We show that observational equivalence, partial and weak identification problems are widespread, that they lead to biased estimates, unreliable t-statistics and may induce investigators to select false models. We examine whether different objective functions affect identification and study how small samples interact with parameters and shock identification. We provide diagnostics and tests to detect identification failures and apply them to a state-of-the-art model.

How much structure in empirical models?

This chapter highlights the problems that structural methods and SVAR approaches have when estimating DSGE models and examining their ability to capture important features of the data. We show that structural methods are subject to severe identification problems due, in large part, to the nature of DSGE models. The problems can be patched up in a number of ways but solved only if DSGEs are completely reparametrized or respecified. The potential misspecification of the structural relationships give Bayesian methods an hedge over classical ones in structural estimation. SVAR approaches may face invertibility problems but simple diagnostics can help to detect and remedy these problems. A pragmatic empirical approach ought to use the flexibility of SVARs against potential misspecificationof the structural relationships but must firmly tie SVARs to the class of DSGE models which could have have generated the data.

Weighted metric multidimensional scaling

This paper establishes a general framework for metric scaling of any distance measure between individuals based on a rectangular individuals-by-variables data matrix. The method allows visualization of both individuals and variables as well as preserving all the good properties of principal axis methods such as principal components and correspondence analysis, based on the singular-value decomposition, including the decomposition of variance into components along principal axes which provide the numerical diagnostics known as contributions. The idea is inspired from the chi-square distance in correspondence analysis which weights each coordinate by an amount calculated from the margins of the data table. In weighted metric multidimensional scaling (WMDS) we allow these weights to be unknown parameters which are estimated from the data to maximize the fit to the original distances. Once this extra weight-estimation step is accomplished, the procedure follows the classical path in decomposing a matrix and displaying its rows and columns in biplots.

Weighted Euclidean biplots

We construct a weighted Euclidean distance that approximates any distance or dissimilarity measure between individuals that is based on a rectangular cases-by-variables data matrix. In contrast to regular multidimensional scaling methods for dissimilarity data, the method leads to biplots of individuals and variables while preserving all the good properties of dimension-reduction methods that are based on the singular-value decomposition. The main benefits are the decomposition of variance into components along principal axes, which provide the numerical diagnostics known as contributions, and the estimation of nonnegative weights for each variable. The idea is inspired by the distance functions used in correspondence analysis and in principal component analysis of standardized data, where the normalizations inherent in the distances can be considered as differential weighting of the variables. In weighted Euclidean biplots we allow these weights to be unknown parameters, which are estimated from the data to maximize the fit to the chosen distances or dissimilarities. These weights are estimated using a majorization algorithm. Once this extra weight-estimation step is accomplished, the procedure follows the classical path in decomposing the matrix and displaying its rows and columns in biplots.

Chagas Disease among the Latin American Adult population attending in a primary care center in Barcelona, Spain

Background/Aims: The epidemiology of Chagas disease, until recently confined to areas of continental Latin America, has undergone considerable changes in recent decades due to migration to other parts of the world, including Spain. We studied the prevalence of Chagas disease in Latin American patients treated at a health center in Barcelona and evaluated its clinical phase. We make some recommendations for screening for the disease. Methodology/Principal Findings: We performed an observational, cross-sectional prevalence study by means of an immunochromatographic test screening of all continental Latin American patients over the age of 14 years visiting the health centre from October 2007 to October 2009. The diagnosis was confirmed by serological methods: conventional in-house ELISA (cELISA), a commercial kit (rELISA) and ELISA using T cruzi lysate (Ortho-Clinical Diagnostics) (oELISA). Of 766 patients studied, 22 were diagnosed with T. cruzi infection, showing a prevalence of 2.87% (95% CI, 1.6-4.12%). Of the infected patients, 45.45% men and 54.55% women, 21 were from Bolivia, showing a prevalence in the Bolivian subgroup (n = 127) of 16.53% (95% CI, 9.6-23.39%). All the infected patients were in a chronic phase of Chagas disease: 81% with the indeterminate form, 9.5% with the cardiac form and 9.5% with the cardiodigestive form. All patients infected with T. cruzi had heard of Chagas disease in their country of origin, 82% knew someone affected, and 77% had a significant history of living in adobe houses in rural areas. Conclusions: We found a high prevalence of T. cruzi infection in immigrants from Bolivia. Detection of T. cruzi¿infected persons by screening programs in non-endemic countries would control non-vectorial transmission and would benefit the persons affected, public health and national health systems.

EURECCA colorectal: multidisciplinary mission statement on better care for patients with colon and rectal cancer in Europe

Background: Care for patients with colon and rectal cancer has improved in the last twenty years however still considerable variation exists in cancer management and outcome between European countries. Therefore, EURECCA, which is the acronym of European Registration of cancer care, is aiming at defining core treatment strategies and developing a European audit structure in order to improve the quality of care for all patients with colon and rectal cancer. In December 2012 the first multidisciplinary consensus conference about colon and rectum was held looking for multidisciplinary consensus. The expert panel consisted of representatives of European scientific organisations involved in cancer care of patients with colon and rectal cancer and representatives of national colorectal registries. Methods: The expert panel had delegates of the European Society of Surgical Oncology (ESSO), European Society for Radiotherapy & Oncology (ESTRO), European Society of Pathology (ESP), European Society for Medical Oncology (ESMO), European Society of Radiology (ESR), European Society of Coloproctology (ESCP), European CanCer Organisation (ECCO), European Oncology Nursing Society (EONS) and the European Colorectal Cancer Patient Organisation (EuropaColon), as well as delegates from national registries or audits. Experts commented and voted on the two web-based online voting rounds before the meeting (between 4th and 25th October and between the 20th November and 3rd December 2012) as well as one online round after the meeting (4th20th March 2013) and were invited to lecture on the subjects during the meeting (13th15th December 2012). The sentences in the consensus document were available during the meeting and a televoting round during the conference by all participants was performed. All sentences that were voted on are available on the EURECCA website www.canceraudit.eu. The consensus document was divided in sections describing evidence based algorithms of diagnostics, pathology, surgery, medical oncology, radiotherapy, and follow-up where applicable for treatment of colon cancer, rectal cancer and stage IV separately. Consensus was achieved using the Delphi method. Results: The total number of the voted sentences was 465. All chapters were voted on by at least 75% of the experts. Of the 465 sentences, 84% achieved large consensus, 6% achieved moderate consensus, and 7% resulted in minimum consensus. Only 3% was disagreed by more than 50% of the members. Conclusions: It is feasible to achieve European Consensus on key diagnostic and treatment issues using the Delphi method. This consensus embodies the expertise of professionals from all disciplines involved in the care for patients with colon and rectal cancer. Diagnostic and treatment algorithms were developed to implement the current evidence and to define core treatment guidance for multidisciplinary team management of colon and rectal cancer throughout Europe.

EURECCA colorectal: multidisciplinary mission statement on better care for patients with colon and rectal cancer in Europe

Background: Care for patients with colon and rectal cancer has improved in the last twenty years however still considerable variation exists in cancer management and outcome between European countries. Therefore, EURECCA, which is the acronym of European Registration of cancer care, is aiming at defining core treatment strategies and developing a European audit structure in order to improve the quality of care for all patients with colon and rectal cancer. In December 2012 the first multidisciplinary consensus conference about colon and rectum was held looking for multidisciplinary consensus. The expert panel consisted of representatives of European scientific organisations involved in cancer care of patients with colon and rectal cancer and representatives of national colorectal registries. Methods: The expert panel had delegates of the European Society of Surgical Oncology (ESSO), European Society for Radiotherapy & Oncology (ESTRO), European Society of Pathology (ESP), European Society for Medical Oncology (ESMO), European Society of Radiology (ESR), European Society of Coloproctology (ESCP), European CanCer Organisation (ECCO), European Oncology Nursing Society (EONS) and the European Colorectal Cancer Patient Organisation (EuropaColon), as well as delegates from national registries or audits. Experts commented and voted on the two web-based online voting rounds before the meeting (between 4th and 25th October and between the 20th November and 3rd December 2012) as well as one online round after the meeting (4th-20th March 2013) and were invited to lecture on the subjects during the meeting (13th-15th December 2012). The sentences in the consensus document were available during the meeting and a televoting round during the conference by all participants was performed. All sentences that were voted on are available on the EURECCA website www.canceraudit.eu. The consensus document was divided in sections describing evidence based algorithms of diagnostics, pathology, surgery, medical oncology, radiotherapy, and follow-up where applicable for treatment of colon cancer, rectal cancer and stage IV separately. Consensus was achieved using the Delphi method. Results: The total number of the voted sentences was 465. All chapters were voted on by at least 75% of the experts. Of the 465 sentences, 84% achieved large consensus, 6% achieved moderate consensus, and 7% resulted in minimum consensus. Only 3% was disagreed by more than 50% of the members. Conclusions: It is feasible to achieve European Consensus on key diagnostic and treatment issues using the Delphi method. This consensus embodies the expertise of professionals from all disciplines involved in the care for patients with colon and rectal cancer. Diagnostic and treatment algorithms were developed to implement the current evidence and to define core treatment guidance for multidisciplinary team management of colon and rectal cancer throughout Europe.

Mechanisms underlying cytotoxicity induced by engineered nanomaterials: a review of in vitro studies

Engineered nanomaterials are emerging functional materials with technologically interesting properties and a wide range of promising applications, such as drug delivery devices, medical imaging and diagnostics, and various other industrial products. However, concerns have been expressed about the risks of such materials and whether they can cause adverse effects. Studies of the potential hazards of nanomaterials have been widely performed using cell models and a range of in vitro approaches. In the present review, we provide a comprehensive and critical literature overview on current in vitro toxicity test methods that have been applied to determine the mechanisms underlying the cytotoxic effects induced by the nanostructures. The small size, surface charge, hydrophobicity and high adsorption capacity of nanomaterial allow for specific interactions within cell membrane and subcellular organelles, which in turn could lead to cytotoxicity through a range of different mechanisms. Finally, aggregating the given information on the relationships of nanomaterial cytotoxic responses with an understanding of its structure and physicochemical properties may promote the design of biologically safe nanostructures.

Assessment in CLIL

The aim of this talk is to explore assessment in higher education and support for learners during their academic education. It investigates the assessment methods that provide success for universities and learners. Universities which implement CLIL should assess learners who would like to attend a programme in English without taking account of their English language qualifications. This assessment should be done in writing, listening and comprehension, speaking and reading and comprehension. In the literature, formative and summative assessments are considered. Formative assessment is ongoing, 'more complex as its intention is to be directly diagnostics with a view to immediately impacting on learner's next steps' (Coyle et al, 2010). Summative assessment occurs at the end of the term or course. McKay, 2006 divides assessment into three phases: design, operationalization and administration phase. If these three phases can't be embedded in the classroom as they are, they can be introduced as a set of questions; why?, how? and what?