Assessing the structural change of strategic mobility: determinants under hypercompetitive environments

The primary purpose of this exploratory empirical study is to examine the structural stability of a limited number of alternative explanatory factors of strategic change. On the basis of theoretical arguments and prior empirical evidence from two traditional perspectives, we propose an original empirical framework to analyse whether these potential explanatory factors have remained stable over time in a highly turbulent environment. This original question is explored in a particular setting: the population of Spanish private banks. The firms of this industry have experienced a high level of strategic mobility as a consequence of fundamental changes undergone in their environmental conditions over the last two decades (mainly changes related to the new banking and financial regulation process). Our results consistently support that the effect of most explanatory factors of strategic mobility considered did not remain stable over the whole period of analysis. From this point of view, the study sheds new light on major debates and dilemmas in the field of strategy regarding why firms change their competitive patterns over time and, hence, to what extent the "contextdependency" of alternative views of strategic change as their relative validation can vary over time for a given population. Methodologically, this research makes two major contributions to the study of potential determinants of strategic change. First, the definition and measurement of strategic change employing a new grouping method, the Model-based Cluster Method or MCLUST. Second, in order to asses the possible effect of determinants of strategic mobility we have controlled the non-observable heterogeneity using logistic regression models for panel data.

Creating and using a non-dedicated HPC cluster with ParallelKnoppix

This note describes ParallelKnoppix, a bootable CD that allows econometricians with average knowledge of computers to create and begin using a high performance computing cluster for parallel computing in very little time. The computers used may be heterogeneous machines, and clusters of up to 200 nodes are supported. When the cluster is shut down, all machines are in their original state, so their temporary use in the cluster does not interfere with their normal uses. An example shows how a Monte Carlo study of a bootstrap test procedure may be done in parallel. Using a cluster of 20 nodes, the example runs approximately 20 times faster than it does on a single computer.

ParallelKnoppix - Rapid deployment of a linux cluster for MPI parallel processing using non-dedicated computers

This note describes ParallelKnoppix, a bootable CD that allows creation of a Linux cluster in very little time. An experienced user can create a cluster ready to execute MPI programs in less than 10 minutes. The computers used may be heterogeneous machines, of the IA-32 architecture. When the cluster is shut down, all machines except one are in their original state, and the last can be returned to its original state by deleting a directory. The system thus provides a means of using non-dedicated computers to create a cluster. An example session is documented.

Regional decomposition of CO2 emissions in the world: a cluster analysis

The purpose of this paper is to study the possible differences among countries as CO2 emitters and to examine the underlying causes of these differences. The starting point of the analysis is the Kaya identity, which allows us to break down per capita emissions in four components: an index of carbon intensity, transformation efficiency, energy intensity and social wealth. Through a cluster analysis we have identified five groups of countries with different behavior according to these four factors. One significant finding is that these groups are stable for the period analyzed. This suggests that a study based on these components can characterize quite accurately the polluting behavior of individual countries, that is to say, the classification found in the analysis could be used in other studies which look to study the behavior of countries in terms of CO2 emissions in homogeneous groups. In this sense, it supposes an advance over the traditional regional or rich-poor countries classifications .

Sistema de secreción de tipo III en Aeromonas mesòfilas

Aeromonas hydrophila és un bacil gram-negatiu, patogen oportunista d’animal i humans. La patogènesi d’A. Hydrophila és multifactorial. A fi d'identificar gens implicats en la virulència de la soca PPD134/91 d’A. hydrophila, vam realitzar experiments de substracció gènica, que van dur a la detecció de 22 fragments d’ADN que codificaven 19 potencials factors de virulencia, incloent un gen que codificava una proteïna de sistema de secreció de tipus III (T3SS). La importància creixent del T3SS en la patogènesi de diversos bacteris, ens va dur a identificar i analitzar l'agrupació gènica del T3SS de les soques AH-1 i AH-3 d’A. hydrophila. La inactivació dels gens de T3SS aopB i aopD d’A. hydrophila AH-1, i ascV d’A. hydrophila AH-3, comporta una disminució de la citotoxicitat, un increment de la fagocitosi, i una reducció de la virulència en diferents models animals. Aquests resultats demostren que el T3SS és necessari per a la patogenicitat. També vam clonar i seqüenciar una ADP-ribosiltransferasa (AexT) a la soca AH-3 d’A. hydrophila, i vam demostrar que aquesta toxina és translocada via el T3SS, sistema que al seu torn sembla ser induïble in vitro en condicions de depleció de calci. El mutant en el gen aexT de la soca AH-3 d’A. hydrophila va mostrar una lleugera reducció de la virulència, assajada amb diferents mètodes. Mitjançant l'ús de diferents sondes d’ADN, vam determinar la presència del T3SS en soques tant clíniques com ambientals de diferents espècies del gènere Aeromonas: A. hydrophila, A. veronii, i A. caviae, i la codistribució d'aquesta agrupació gènica i el gen aexT. Finalment, amb la finalitat d'estudiar la regulació transcripcional de l'agrupació gènica de T3SS i de l’efector AexT A. hydrophila AH-3, vam aïllar els promotors predits per l’operó aopN-aopD i el gen aexT, i els vam fusionar amb el gen reporter gfp (Green Fluorescence Protein). A més, vam demostrar que l'expressió d'ambdós promotors depèn de diferents components bacterians, com per exemple el sistema de dos components PhoP/PhoQ, el sistema de quorum sensing AhyI/AhyR, o el complex piruvat deshidrogenasa.

Do creative industries cluster? mapping creative local production systems in Italy

An important debate on the role of creativity and culture as factors of local economic development is distinctly emerging. Despite the emphasis put on the theoretical definition of these concepts, it is necessary to strengthen comparative research for the identification and analysis of the kind of creativity embedded in the territory as well as its determinants. Creative local production systems are identified in Italy and Spain departing from local labour markets as territorial units, and focusing on two different kinds of creative

Cluster algebras, quiver representations and triangulated categories

This is an introduction to some aspects of Fomin-Zelevinsky’s cluster algebras and their links with the representation theory of quivers and with Calabi-Yau triangulated categories. It is based on lectures given by the author at summer schools held in 2006 (Bavaria)and 2008 (Jerusalem). In addition to by now classical material, we present the outline of a proof of the periodicity conjecture for pairs of Dynkin diagrams (details will appear elsewhere) and recent results on the interpretation of mutations as derived equivalences.

Why do creative industries cluster? An analysis of the determinants of clustering of creative industries

Creative industries tend to concentrate mainly around large- and medium-sized cities, forming creative local production systems. The text analyses the forces behind clustering of creative industries to provide the first empirical explanation of the determinants of creative employment clustering following a multidisciplinary approach based on cultural and creative economics, evolutionary geography and urban economics. A comparative analysis has been performed for Italy and Spain. The results show different patterns of creative employment clustering in both countries. The small role of historical and cultural endowments, the size of the place, the average size of creative industries, the productive diversity and the concentration of human capital and creative class have been found as common factors of clustering in both countries.

Industrial district effects and innovation in the Tuscan shipbuilding industry

The aim of the present work is to investigate innovative processes within a geographical cluster, and thus contribute to the debate on the effects of industrial clusters on innovation capacity. In particular, we would like to ascertain whether the advantages of industrial districts in promoting innovation, as already revealed by literature (diffusion of knowledge, social capital and trust, efficient networking), are also keys to success in the Tuscan shipbuilding industry of pleasure and sporting boats. First, we verify the existence of clusters of shipbuilding in Tuscany, using a specific methodology. Next, in the identified clusters, we analyse three innovative networks financed in a policy to support innovation, and examine whether the typical features of a cluster for promoting innovation are at work, using a questionnaire administered to 71 actors. Finally, we develop a performance analysis of the cluster firms and ascertain whether their different behaviours also lead to different performances. The analysis results show that our case records effects of industrial clustering on innovation capacity, such as the important role given to trust and social capital, the significant worth put in interfirm relations and in each partner’s specific competencies, or even the distinctive performance of firms belonging to a cluster.

The Role of the European Union in the Processes to Ban Cluster Munitions

At the end of 2008 the Convention on Cluster Munitions (CCM) that outlawed almost all types of cluster munitions was signed. It was the product of the so-called Oslo process, which had been set up two years earlier as a reaction to the failure to add a new protocol banning cluster munitions to the Convention on Certain Conventional Weapons (CCW). The position of the EU in these two processes was ambivalent: on the one hand it belonged to the strongest proponents for a new protocol within the CCW, but on the other hand the member states were in general not able to act jointly in the Oslo Process. According to this working paper especially the aspect of national security and the related relationship to the United States influenced the stances of many member states and complicated the formation of a common European position. There were common normative values of the EU detected, which played a role in the CCW, but they were only secondary to other interests of the member states.

Assessing the Precision of Compositional Data in a Stratified Double Stage Cluster Sample: Application to the Swiss Earnings Structure Survey

Precision of released figures is not only an important quality feature of official statistics,it is also essential for a good understanding of the data. In this paper we show a casestudy of how precision could be conveyed if the multivariate nature of data has to betaken into account. In the official release of the Swiss earnings structure survey, the totalsalary is broken down into several wage components. We follow Aitchison's approachfor the analysis of compositional data, which is based on logratios of components. Wefirst present diferent multivariate analyses of the compositional data whereby the wagecomponents are broken down by economic activity classes. Then we propose a numberof ways to assess precision

Identificació de paisatges funcionals mitjançant anàlisi cluster

El terme paisatge i les seves aplicacions són cada dia més utilitzats per les administracions i altres entitats com a eina de gestió del territori. Aprofitant la gran quantitat de dades en bases compatibles amb SIG (Sistemes d’Informació Geogràfica) existents a Catalunya s’ha desenvolupat una síntesi cartogràfica on s’identifiquen els Paisatges Funcionals (PF) de Catalunya, concepte que fa referència al comportament fisico-ecològic del terreny a partir de variables topogràfiques i climàtiques convenientment transformades i agregades. S’ha utilitzat un mètode semiautomàtic i iteratiu de classificació no supervisada (clustering) que permet la creació d’una llegenda jeràrquica o nivells de generalització. S’ha obtingut com a resultat el Mapa de Paisatges Funcionals de Catalunya (MPFC) amb una llegenda de 26 categories de paisatges i 5 nivells de generalització amb una resolució espacial de 180 m. Paral·lelament, s’han realitzat validacions indirectes sobre el mapa obtingut a partir dels coneixements naturalistes i la cartografia existent, així com també d’un mapa d’incertesa (aplicant lògica difusa) que aporten informació de la fiabilitat de la classificació realitzada. Els Paisatges Funcionals obtinguts permeten relacionar zones de condicions topo-climàtiques homogènies i dividir el territori en zones caracteritzades ambientalment i no políticament amb la intenció que sigui d’utilitat a l’hora de millorar la gestió dels recursos naturals i la planificació d’actuacions humanes.

Ab initio absorption spectrum of NiO combining molecular dynamics with the embedded cluster approach in a discrete reaction field

We developed a procedure that combines three complementary computational methodologies to improve the theoretical description of the electronic structure of nickel oxide. The starting point is a Car-Parrinello molecular dynamics simulation to incorporate vibrorotational degrees of freedom into the material model. By means ofcomplete active space self-consistent field second-order perturbation theory (CASPT2) calculations on embedded clusters extracted from the resulting trajectory, we describe localized spectroscopic phenomena on NiO with an efficient treatment of electron correlation. The inclusion of thermal motion into the theoretical description allowsus to study electronic transitions that, otherwise, would be dipole forbidden in the ideal structure and results in a natural reproduction of the band broadening. Moreover, we improved the embedded cluster model by incorporating self-consistently at the complete active space self-consistent field (CASSCF) level a discrete (or direct) reaction field (DRF) in the cluster surroundings. The DRF approach offers an efficient treatment ofelectric response effects of the crystalline embedding to the electronic transitions localized in the cluster. We offer accurate theoretical estimates of the absorption spectrum and the density of states around the Fermi level of NiO, and a comprehensive explanation of the source of the broadening and the relaxation of the charge transferstates due to the adaptation of the environment

Full Exploration of the Diels–Alder Cycloaddition on Metallofullerenes M3N@C80 (M=Sc, Lu, Gd): The D5h versus Ih Isomer and the Influence of the Metal Cluster

In this work a detailed investigation of the exohedral reactivity of the most important and abundant endohedral metallofullerene (EMF) is provided, that is, Sc3N@Ih-C80 and its D5h counterpart Sc3N@D5h-C80, and the (bio)chemically relevant lutetium- and gadolinium-based M3N@Ih/D5h-C80 EMFs (M=Sc, Lu, Gd). In particular, we analyze the thermodynamics and kinetics of the Diels–Alder cycloaddition of s-cis-1,3-butadiene on all the different bonds of the Ih-C80 and D5h-C80 cages and their endohedral derivatives. First, we discuss the thermodynamic and kinetic aspects of the cycloaddition reaction on the hollow fullerenes and the two isomers of Sc3N@C80. Afterwards, the effect of the nature of the metal nitride is analyzed in detail. In general, our BP86/TZP//BP86/DZP calculations indicate that [5,6] bonds are more reactive than [6,6] bonds for the two isomers. The [5,6] bond D5h-b, which is the most similar to the unique [5,6] bond type in the icosahedral cage, Ih-a, is the most reactive bond in M3N@D5h-C80 regardless of M. Sc3N@C80 and Lu3N@C80 give similar results; the regioselectivity is, however, significantly reduced for the larger and more electropositive M=Gd, as previously found in similar metallofullerenes. Calculations also show that the D5h isomer is more reactive from the kinetic point of view than the Ih one in all cases which is in good agreement with experiments