Galois extension of CP-Graded ring extensions

In this paper, we investigate galois theory of CP-graded ring extensions. In particular, we generalize some galois results given in [1, 2] and, without restriction to nor graded fields nor torsion free of the grade groups, we show that some results of graded field extensions given in [3] hold.

Study of the influence of grain size and precipitates on the electromagnetic losses in different grades of non-oriented fully processed electrical steel

The study was performed in the installations of OCAS, a Steel Research Centre of ArcelorMittal. Taking M32 steel (3.25%Si+0.9%Al) as the basis chemical composition and three different thicknesses (0.35, 0.5 and 0.65mm), different annealing conditions (temperature and time) have been applied in the laboratory simulator at St. Chély, France. The aim was to link annealing parameters, grain size and energy loss. It was determined the optimum annealing parameters to reach the lowest power losses for three different grades of non-oriented fully processed electrical steel. In addition, M250-50 samples having different magnetic behaviour (high and low losses) but the same grain size and texture, have been analyzed in terms of TEM observations of their precipitates, in the University of Marseille. The results reveal that a high amount of medium and big precipitates (&10 nm) worsen the magnetic properties of the material. The small precipitates (&10nm) do not have a strong influence on the magnetic properties. The presence of precipitates can have a great influence on the power losses and further work is clearly necessary.

Link between microstructure and properties in new metallurgical concepts for very low loss non-oriented electrical steel

The influence of chemistry and soaking temperature (maximal temperature of the continuous annealing) on the final properties of non-oriented electrical steels has been studied. With this objective two different studies have been performed. First the Mn, Ni and Cr content of a low loss electrical steel composition has been modified. An intermediate content and a high content of each element has been added in order to study the influence of this components on the magnetic looses, grain size and texture. Secondly the influence of the soaking temperature on magnetic properties, grain size and oxidation in four grades of non-oriented electrical steels (Steel A, B, C and D) was studied.

Integración de plantillas para la creación de soluciones de aprendizaje siguiendo los estándares IMS LD e IMS CP en LdShake

Des de fa alguns anys les tecnologies educatives han anat evolucionant y revolucionant el món pedagògic. En aquest sentit, son molts els grups de treball que participen en la investigació i producció de nous estàndards educatius. Alguns d’aquests estàndards son IMS Learning Designi IMS Content Packaging. L’adopció d’aquests estàndards per part de la comunitat educativa depèn en gran mesura de l’accessibilitat a les eines de producció per part dels membres d’aquesta comunitat. En aquest projecte es fa patent la necessitat d’una aplicació que permeti la generació d’unitats d’aprenentatge de forma assistida mitjançant plantilles.D’altre banda, ELGG és un sistema gestor de continguts open-source que permet crear xarxes socials de forma senzilla i amb la possibilitat d’afegir nous mòduls per augmentar així la seva funcionalitat. Per aquest motiu, aquest projecte es basa en la plataforma col·laborativa de recolzament als professors LdShake, utilitzada per la Universitat Pompeu Fabra (UPF), quetreballa sobre el Framework de ELGG.Sobre aquests dos conceptes descansa la idea general del projecte – a saber, el disseny iposterior desenvolupament d’un sistema de generació d’unitats d’aprenentatge basat enplantilles seguint els estàndards IMS LD i IMS CP sobre LdShake.Per tant, en aquest projecte ens hem centrat en el desenvolupament i avaluació preliminar d’un mòdul integrat en LdShake, centrat en el subconjunt necessari de característiques bàsiques dels estàndards de la IMS Global Consortium, que ens permet la generació d’unitats d’aprenentatge, així com la seva distribució i reproducció en sistemes de gestió d’aprenentatge o LMS, gràcies al’ús de plantilles que son en si mateixes una solució coneguda, provada i exitosa.

Networks of people in specialty production: family firms in the iron and steel Wire industries in Spain (1870-2000)

Capital intensive industries in specialized niches of production have constituted solid ground for family firms in Spain , as evidenced by the experience of the iron and steel wire industries between 1870 and 2000. The embeddedness of these firms in their local and regional environments have allowed the creation of networks that, together with favourable institutional conditions, significantly explain the dominance of family entrepreneurship in iron and steel wire manufacturing in Spain, until the end of the 20 th century. Dominance of family firms at the regional level has not been not an obstacle for innovation in wire manufacturing in Spain, which has taken place even when institutional conditions blocked innovation and traditional networking. Therefore, economic theories about the difficulties dynastic family firms may have to perform appropriately in science-based industries must be questioned

Signatures of CP violation in the presence of multiple b-pair production at hadron colliders

We calculate the production of two b-quark pairs in hadron collisions. Sources of multiple pairs are multiple interactions and higher order perturbative QCD mechanisms. We subsequently investigate the competing effects of multiple b-pair production on measurements of CP violation: (i) the increase in event rate with multiple b-pair cross sections which may reach values of the order of 1 b in the presence of multiple interactions and (ii) the dilution of b versus b tagging efficiency because of the presence of events with four B mesons. The impact of multiple B-meson production is small unless the cross section for producing a single pair exceeds 1 mb. We show that even for larger values of the cross section the competing effects (i) and (ii) roughly compensate so that there is no loss in the precision with which CP-violating CKM angles can be determined.

New CP violation in neutrino oscillations

Measurements of CP-violating observables in neutrino oscillation experiments have been studied in the literature as a way to determine the CP-violating phase in the mixing matrix for leptons. Here we show that such observables also probe new neutrino interactions in the production or detection processes. Genuine CP violation and fake CP violation due to matter effects are sensitive to the imaginary and real parts of new couplings. The dependence of the CP asymmetry on the source-detector distance is different from the standard one and, in particular, enhanced at short distances. We estimate that future neutrino factories will be able to probe in this way new interactions that are up to four orders of magnitude weaker than the weak interactions. We discuss the possible implications for models of new physics.

Noether's theorem and gauge transformations. Application to the bosonic string and CP(2,n-1) model

New results on the theory of constrained systems are applied to characterize the generators of Noethers symmetry transformations. As a byproduct, an algorithm to construct gauge transformations in Hamiltonian formalism is derived. This is illustrated with two relevant examples.

Networks of people in specialty production: family firms in the iron and steel Wire industries in Spain (1870-2000)

Capital intensive industries in specialized niches of production have constituted solid ground for family firms in Spain , as evidenced by the experience of the iron and steel wire industries between 1870 and 2000. The embeddedness of these firms in their local and regional environments have allowed the creation of networks that, together with favourable institutional conditions, significantly explain the dominance of family entrepreneurship in iron and steel wire manufacturing in Spain, until the end of the 20 th century. Dominance of family firms at the regional level has not been not an obstacle for innovation in wire manufacturing in Spain, which has taken place even when institutional conditions blocked innovation and traditional networking. Therefore, economic theories about the difficulties dynastic family firms may have to perform appropriately in science-based industries must be questioned

El delito de trata de personas: análisis del nuevo artículo 177 bis CP desde la óptica del cumplimiento de compromisos internacionales de incriminación

El artículo analiza los elementos esenciales del nuevo delito de trata de personas que incorporado al CP mediante la reforma de 2010. Asimismo explora la tipificación de la trata de personas en Derecho comparado, los compromisos internacionales adquiridos por el Estado español acerca de la incriminación de esta conducta y su nivel de cumplimiento con el nuevo delito.