La relació entre el valor N30 de L'SPT i la resistència a la compressió simple

The unconfined compression strength is a geotechnical parameter frequently used to determine the bearing capacity of foundations on clayey soils. Its value can be obtained from the unconfined compression test and, among several in situ tests, the standard penetration test (SPT). However, a comparison between the values of such a strength determined by both tests in CL, CL-ML and CH soils shows that it does not exist an approximate relationship. In any case it is remarkable that values of the test conducted in the laboratory fit between the lower and the higher ones calculated from the standard penetration number. This is very important for those geotechnical reports in which the unconfined compression strength is only based on the SPT. In this way, if the lower value is taken to evaluate the ultimate soilbearing capacity the result will not be very accurate but it will probably be by the side of safety

Leverage and beliefs: Personal experience and risk taking in margin lending

What determines risk-bearing capacity and the amount of leverage in financial markets? Thispaper uses unique micro-data on collateralized lending contracts during a period of financialdistress to address this question. An investor syndicate speculating in English stocks wentbankrupt in 1772. Using hand-collected information from Dutch notarial archives, we examinechanges in lenders' behavior following exposure to potential (but not actual) losses. Before thedistress episode, financiers that lent to the ill-fated syndicate were indistinguishable from therest. Afterwards, they behaved differently: they lent with much higher haircuts. Only lendersexposed to the failed syndicate altered their behavior. The differential change is remarkable sincethe distress was public knowledge, and because none of the lenders suffered actual losses ? allfinanciers were repaid in full. Interest rates were also unaffected; the market balanced solelythrough changes in collateral requirements. Our findings are consistent with a heterogeneousbeliefs-interpretation of leverage. They also suggest that individual experience can modify thelevel of leverage in a market quickly.

Anti-MPER antibodies with heterogeneous neutralization capacity are detectable in most untreated HIV-1 infected individuals

Background The MPER region of the HIV-1 envelope glycoprotein gp41 is targeted by broadly neutralizing antibodies. However, the localization of this epitope in a hydrophobic environment seems to hamper the elicitation of these antibodies in HIV infected individuals. We have quantified and characterized anti-MPER antibodies by ELISA and by flow cytometry using a collection of mini gp41-derived proteins expressed on the surface of 293T cells. Longitudinal plasma samples from 35 HIV-1 infected individuals were assayed for MPER recognition and MPER-dependent neutralizing capacity using HIV-2 viruses engrafted with HIV-1 MPER sequences. Results Miniproteins devoid of the cysteine loop of gp41 exposed the MPER on 293T cell membrane. Anti-MPER antibodies were identified in most individuals and were stable when analyzed in longitudinal samples. The magnitude of the responses was strongly correlated with the global response to the HIV-1 envelope glycoprotein, suggesting no specific limitation for anti-MPER antibodies. Peptide mapping showed poor recognition of the C-terminal MPER moiety and a wide presence of antibodies against the 2F5 epitope. However, antibody titers failed to correlate with 2F5-blocking activity and, more importantly, with the specific neutralization of HIV-2 chimeric viruses bearing the HIV-1 MPER sequence; suggesting a strong functional heterogeneity in anti-MPER humoral responses. Conclusions Anti-MPER antibodies can be detected in the vast majority of HIV-1 infected individuals and are generated in the context of the global anti-Env response. However, the neutralizing capacity is heterogeneous suggesting that eliciting neutralizing anti-MPER antibodies by immunization might require refinement of immunogens to skip nonneutralizing responses.

Tacit collusion and capacity withholding in repeated uniform price auctions

This paper contributes to the study of tacit collusion by analyzing infinitely repeated multiunit uniform price auctions in a symmetric oligopoly with capacity constrained firms. Under both the Market Clearing and Maximum Accepted Price rules of determining the uniform price, we show that when each firm sets a price-quantity pair specifying the firm's minimum acceptable price and the maximum quantity the firm is willing to sell at this price, there exists a range of discount factors for which the monopoly outcome with equal sharing is sustainable in the uniform price auction, but not in the corresponding discriminatory auction. Moreover, capacity withholding may be necessary to sustain this out-come. We extend these results to the case where firms may set bids that are arbitrary step functions of price-quantity pairs with any finite number of price steps. Surprisingly, under the Maximum Accepted Price rule, firms need employ no more than two price steps to minimize the value of the discount factor

Forward induction and the excess capacity puzzle: An experimental investigation.

While the theoretical industrial organization literature has long argued that excess capacity can be used to deter entry into markets, there is little empirical evidence that incumbent firms effectively behave in this way. Bagwell and Ramey (1996) propose a game with a specific sequence of moves and partially-recoverable capacity costs in which forward induction provides a theoretical rationalization for firm behavior in the field. We conduct an experiment with a game inspired by their work. In our data the incumbent tends to keep the market, in contrast to what the forward induction argument of Bagwell and Ramey would suggest. The results indicate that players perceive that the first mover has an advantage without having to pre-commit capacity. In our game, evolution and learning do not drive out this perception. We back these claims with data analysis, a theoretical framework for dynamics, and simulation results.

Asymmetries in the capacity-inflation trade-off

This paper analyzes the joint dynamics of two key macroeconomic variables for the conduct of monetary policy: inflation and the aggregate capacity utilization rate. An econometric procedure useful for estimating dynamic rational expectation models with unobserved components is developed and applied in this context. The method combines the flexibility of the unobserved components approach, based on the Kalman recursion, with the power of the general method of moments estimation procedure. A 'hyb id' Phillips curve relating inflation to the capacity utilization gap and incorporating forward and backward looking components is estimated. The results show that such a relationship in non-linear: the slope of the Phillips curve depends significantly on the magnitude of the capacity gap. These findings provide support for studying the implications of asymmetricmonetary policy rules.

Endogenous capacity utilization and the asymmetric effects of monetary policy

This paper investigates the role of variable capacity utilization as a source of asymmetries in the relationship between monetary policy and economic activity within a dynamic stochastic general equilibrium framework. The source of the asymmetry is directly linked to the bottlenecks and stock-outs that emerge from the existence of capacity constraints in the real side of the economy. Money has real effects due to the presence of rigidities in households' portfolio decisions in the form of a Luces-Fuerst 'limited participation' constraint. The model features variable capacity utilization rates across firms due to demand uncertainty. A monopolistic competitive structure provides additional effects through optimal mark-up changes. The overall message of this paper for monetary policy is that the same actions may have different effects depending on the capacity utilization rate of the economy.

Lipschitz harmonic capacity and Bilipschitz images of cantor sets

For bilipschitz images of Cantor sets in Rd we estimate the Lipschitz harmonic capacity and show this capacity is invariant under bilipschitz homeomorphisms.

Quasiconformal maps, analytic capacity, and non linear potentials

"Vegeu el resum a l'inici del document del fitxer adjunt."

Traffic forecasts under uncertainty and capacity constraints

Traffic forecasts provide essential input for the appraisal of transport investment projects. However, according to recent empirical evidence, long-term predictions are subject to high levels of uncertainty. This paper quantifies uncertainty in traffic forecasts for the tolled motorway network in Spain. Uncertainty is quantified in the form of a confidence interval for the traffic forecast that includes both model uncertainty and input uncertainty. We apply a stochastic simulation process based on bootstrapping techniques. Furthermore, the paper proposes a new methodology to account for capacity constraints in long-term traffic forecasts. Specifically, we suggest a dynamic model in which the speed of adjustment is related to the ratio between the actual traffic flow and the maximum capacity of the motorway. This methodology is applied to a specific public policy that consists of suppressing the toll on a certain motorway section before the concession expires.

The Innovation and Imitation Dichotomy in Spanish firms: do absorptive capacity and the technological frontier matter?

This paper analyses whether a firm’s absorptive capacity and its distance from the technological frontier affect the choice between innovation and imitation in innovative Spanish firms. From an extensive survey of 5,575 firms during the 2004-2009 period, we found two significant results. With regard to the role of absorptive capacity, the empirical evidence shows that when innovative firms have difficulties in accessing external information and hire skilled workers, their innovative capacity is reduced. Meanwhile, with regard to distance from the technological frontier, the firms that reduce this gap manage to increase their innovative capacity at the expense of imitation. To summarise, when we studied firms’ absorptive capacity and their relative position to the technological frontier in tandem, we found that the two factors directly affected firms' ability to innovate or imitate.

Innovation and absorptive capacity: What is the role of technological frontier?

This paper explores how absorptive capacity affects the innovative performance and productivity dynamics of Spanish firms. A firm’s efficiency levels are measured using two variables: the labour productivity and the Total Factor Productivity (TFP). The theoretical framework is based on the seminal contributions of Cohen and Levinthal (1989, 1990) regarding absorptive capacity; and the applied framework is based on the four-stage structural model proposed by Crépon, Duguet and Mairesse (1998) for setting the determinants of R&D, the effects of R&D activities on innovation outputs, and the impacts of innovation on firm productivity. The present study uses a twostage structural model. In the first stage, a probit estimation is used to investigate how the sources of R&D, the absorptive capacity and a vector of the firm’s individual features influence the firm’s likelihood of developing innovations in products or processes. In the second phase, a quantile regression is used to analyze the effect of R&D sources, absorptive capacity and firm characteristics on productivity. This method shows the elasticity of each exogenous variable on productivity according to the firms’ levels of efficiency, and thus allows us to distinguish between firms that are close to the technological frontier and those that are further away from it. We used extensive firm-level panel data from 5,575 firms for the 2004-2009 period. The results show that the internal absorptive capacity has a strong impact on the productivity of firms, whereas the role of external absorptive capacity differs according to nature of the each industry and according the distance of firms from the technological frontier. Key words: R&D sources, innovation strategies, absorptive capacity, technological distance, quantile regression.

The Innovation and Imitation Dichotomy in Spanish firms: do absorptive capacity and the technological frontier matter?

This paper analyses whether a firm’s absorptive capacity and its distance from the technological frontier affect the choice between innovation and imitation in innovative Spanish firms. From an extensive survey of 5,575 firms during the 2004-2009 period, we found two significant results. With regard to the role of absorptive capacity, the empirical evidence shows that when innovative firms have difficulties in accessing external information and hire skilled workers, their innovative capacity is reduced. Meanwhile, with regard to distance from the technological frontier, the firms that reduce this gap manage to increase their innovative capacity at the expense of imitation. To summarise, when we studied firms’ absorptive capacity and their relative position to the technological frontier in tandem, we found that the two factors directly affected firms' ability to innovate or imitate. Key words: R&D sources, innovation and imitation strategies, absorptive capacity, technological frontier, ordered probit.

Replacement therapy for iron deficiency improves exercise capacity and quality of life in patients with cyanotic congenital heart disease and/or the Eisenmenger syndrome

La teràpia suplementària de ferro millora la capacitat d’exercici i la qualitat de vida en malalts amb una cardiopatia congènita cianòtica i/ o síndrome d’Eisenmenger El dèficit de ferro és una troballa comú en la cardiopatia congènita cianòtica, i pot ser la causa d’una reducció en la capacitat d’exercici. Actualment, està indicada la reposició dels dipòsits de ferro en aquest grup de malalts, éssent les evidències científiques escasses. En el present treball investiguem la seguretat i eficàcia del tractament amb ferro en malalts amb una cardiopatia congènita cianòtica. Per tal motiu, vint-i-cinc malalts amb una cardiopatia congenita cianòtica i dèficit de ferro van ser inclosos de forma prospectiva entre Agost del 2008 i Gener del 2009. El tractament utilitzat fou fumarat ferròs oral, fins a una dosi màxima de 200 mg tres vegades al dia. En l’anàlisi basal i als tres mesos de seguiment es va utilitzar el test de qualitat de vida “CAMPHOR”, el test de la marxa dels 6 minuts i la prova d’esforç amb consum d’oxigen. L’edat mitja fou 39.9+/-10.9 anys, 80% dones. Catorze malalts tenien la síndrome d’Eisenmenger, sis una malaltia cianòtica complexa i cinc circulació de Fontan. Cap d’ells va haver d'interrompre el tractament degut a efectes adversos. Després de tres mesos de tractament, l’hemoglobina (19.0+/-2.9g/dL a 20.4+/-2.7g/dL, p&0.001), ferritina (13.3+/-4.7mug/L a 54.1+/-24.2mug/L, p&0.001) i saturació de transferrina (17.8+/-9.6% a 34.8+/-23.4%, p&0.001) van augmentar significativament. També hi va haver una millora significativa en la puntuació del test de qualitat de vida (20.7+/-10.9 a 16.2+/-10.4, p=0.001) i el test de la marxa (371.7+/-84.7m a 402.8.0+/-74.9m, p=0.001). No es van evidenciar canvis significatius en els valors de consum d’oxigen (40.7+/-9.2% a 43.8+/-12.4%, p=0.15). En definitiva, la teràpia suplementària amb ferro en els malats amb una cardiopatia congènita cianòtica i dèficit de ferro és segura i millora la qualitat de vida i la capacitat funcional. En aquest grup de malalts, per tant, és aconsellable identificar el dèficit de ferro i restaurar-ne els seus dipòsits.

Building Capacity in Developing Countries : OER for Food Safety

The Food Safety Knowledge Network (FSKN) was developed through the collaboration of Michigan State University and a professional network of international food industry retailers and manufacturers. The key objective of the FSKN project is to provide technical resources, in a cost effective way, in order to promote food safety in developing countries and for small and less developed companies. FSKN uses a competency based model including a framework, OERs, and assessments. These tools are being used to support face-to-face training, fully online training, and to gauge the learning outcomes of a series of pilot groups which were held in India, Egypt, and China.