Anàlisi de radiació en vaixells i disseny d'una antena en la banda d'HF

El projecte està dividit en dues parts, per una banda l’anàlisi de radiació en vaixells i per altra banda el disseny d’una antena en la banda d’ HF. La primera part s’inicia amb un estudi de l’escenari marítim a nivell de comunicacions, vaixells i antenes i, a continuació, s’estudia el camp proper sobre les superfícies del vaixell per al posicionament d’antenes amb el màxim aïllament. La segona part tracta el disseny d’una antena en HF a 6 MHz partint d’una antena tipus ranura, de baix perfil. Per validar el seu funcionament es construeix i mesura un prototipus en la banda d’UHF (2 GHz).

Isotermes d'adsorpció d'alquilfenols en sediments i altres materials

Projecte de recerca elaborat a partir d’una estada al Center of Applied Geosciences de la Eberhard Karls Universität entre abril i octubre del 2007. Durant l'estada es va adquirir la tècnica per a la realització d'isotermes d'adsorció aplicant-la posteriorment a l'estudi de dos compostos del grup dels alquilfenols (nonilfenol i octilfenol). Aquestes isotermes es van realitzar en diversos sediments provinents de la conca hidrogràfica del riu Ebre i en altres dos materials (lignit i torba), tots ells amb diferent contingut de carboni orgànic total (que varia entre 0,4% per a un dels sediments i 47,8% per a la torba), per a estudiar la influència d'aquest paràmetre en els comportament del nonilfenol pel que fa a l'adsorció. Per altra banda es va afegir l’octilfenol a l’estudi, tant per separat com en combinació amb el nonilfenol, i es va extendre la isoterma per al nonilfenol a concentracions més baixes, properes a les concentracions que es poden trobar d’aquest compost al medi. Aquestes últimes isotermes es van realitzar utilitzant en tots els casos un dels sediments del riu Ebre, amb un contingut de carboni orgànic del 5,8 %, per a poder comparar els resultats sense la influència d’aquest paràmetre. Totes les mostres es van analitzar utilitzant un cromatogràf de gasos acoblat a un espectròmetre de masses.

Disseny, modelat i fabricació d'una antena "trap" per aplicacions WLAN

En aquest treball s’ha dissenyat i fabricat una antena monopol en estructura planar capaç de treballar correctament a les freqüències WLAN de 2,45-2,5 GHz (802.11b/g) i 4,9-5,875 GHz (802.11a/h/j). Per arribar a aquest objectiu primer s’ha presentat el model de línia de transmissió acabada en circuit obert per simular el comportament d’una antena. S’han comparat i verificat els resultats amb el model d’antena de fil. Seguidament, s’ha estudiat el comportament que introdueix el fet de carregar l’antena amb un ressonador LC. Finalment, s’ha passat del model d’antena de fil a una estructura planar. Aquesta geometria ha permès la realització del trap LC de forma distribuïda a través d’un ressonador CLL. El principi de disseny de l’antena està basat en la introducció d’aquest ressonador CLL amb freqüència de ressonància situada entre les dos bandes de treball i que junt amb l’ajust dels diversos paràmetres que defineixen l’antena han permès obtenir més 1 GHz d’ample de banda a la freqüència de 5 GHz.

El impacto espacial de las economías de aglomeración y su efecto sobre la estructura urbana.El caso de la industria en Barcelona, 1986-1996

Este trabajo trata sobre el papel de la accesibilidad espacial a las economías de aglomeración en el cambio de la estructura espacial del empleo industrial para el caso de la Región Metropolitana de Barcelona (RMB). Utilizando como indicador de cambios en la estructura espacial del empleo el crecimiento de la densidad bruta del empleo municipal entre 1986 y 1996 para siete subsectores industriales, se explora el impacto espacial de las economías de aglomeración que operan a escala local –el municipio y tres áreas de 5, 8 y 12 kilómetros que rodean al propio municipio-, aquellas que emergen del CBD y de los principales subcentros especializados de la región, y las economías de red asociadas al total de puestos de trabajo de la región cuyo acceso depende de la distancia respecto a las principales infraestructuras de transporte.

The spatial effect of intra-metropolitan agglomeration economies

This study deals with the role of spatial accessibility to agglomeration economies in the change in spatial structure of industrial employment for the case of the Barcelona Metropolitan Region of Barcelona (BMR). Using the growth in gross density of municipal employment between 1986 and 1996 for seven manufacturing industries as an indicator of changes in the spatial structure of employment, an exploration is made of the spatial impact of agglomeration economies operating on a local scale the municipality and three areas 5, 8 and 12 kilometres away surrounding the municipality itself - , agglomeration economies emerging from CBD and the main specialised subcentres in the region, and the network economies associated with the total jobs in the region, access to which depends on the distance from the main transport infrastructures

Paratirina intacta a las 24 horas de la tiroidectomía total.Valor predictivo de hipoparatiroidismo definitivo

Estudio clínico prospectivo de 70 pacientes sometidos a tiroidectomía total (TT) El objetivo del estudio es analizar el valor de la determinación de paratirina (PTHi) a las 24 horas de la TT como indicador de riesgo de hipoparatiroidismo definitivo. Cuarenta y cuatro pacientes (62,9%) presentaron hipocalcemia y 27 (38,6%) una deficiencia de PTHi a las 24 h de la TT. Una concentración de PTHi a las 24 h postTT 5,8 pg/mL predice con una sensibilidad del 100% y una especificidad del 81,5% la evolución a hipoparatiroidismo definitivo, con un valor predictivo negativo del 100%. Estudi clínic prospectiu de 70 pacients sotmesos a tiroïdectomia total (TT). L’objectiu de l’estudi és analitzar el valor de la determinació de paratirina (PTHi) a les 24 hores de la TT com a indicador de risc d’hipoparatiroïdisme definitiu. Quaranta-quatre pacients (62,9%) presentaren hipocalcèmia i 27 (38,6%) una deficiència de PTHi a les 24 hores de la TT. Una concentración de PTHi a les 24 h postTT 5,8 pg/mL prediu amb una sensibilitat del 100% i una especificitat del 81,5% l’evolució a hipoparatiroïdisme definitiu, amb un valor predictiu negatiu del 100%.

Development and growth of the early juveniles of the spider crab Maja squinado (Brachyura: Majoidea) in an individual culture system

The spider crab Maja squinado is an endangered Mediterranean species; therefore, culturing it successfully is essential for developing restocking programs. The survival, growth and development of post-larval stages (juvenile crabs, C1-C8) were studied using larvae obtained from adult individuals collected in the Catalan Sea. The juvenile crab stages were cultured individually from a megalopal stage using a semi-open recirculation system to obtain the precise growth data of each juvenile crab stage until C8. Development up to C8 at 20ºC lasted 154±10 days. Survival from C1 to C8 was 5.8 %. Moult increment values in cephothoracic length were similar in all the crab stages (21-35 %). Intermoult duration (9±1 in C1-C2 to 51±8 days in C7-C8) increased sharply from juvenile stage 5. Males and females can be distinguished from C4 based on sexual dimorphism in the pleopods and the presence of gonopores. The allometric growth of the pleon is sex-dependent from C4, with females showing positive allometry and males isometric growth. The juvenile growth rate was lower compared with that of the previously studied Atlantic species Maja brachydactyla.

Ab initio benchmark study for the oxidative addition of CH4 to Pd: importance of basis-set flexibility and polarization

To obtain a state-of-the-art benchmark potential energy surface (PES) for the archetypal oxidative addition of the methane C-H bond to the palladium atom, we have explored this PES using a hierarchical series of ab initio methods (Hartree-Fock, second-order Møller-Plesset perturbation theory, fourth-order Møller-Plesset perturbation theory with single, double and quadruple excitations, coupled cluster theory with single and double excitations (CCSD), and with triple excitations treated perturbatively [CCSD(T)]) and hybrid density functional theory using the B3LYP functional, in combination with a hierarchical series of ten Gaussian-type basis sets, up to g polarization. Relativistic effects are taken into account either through a relativistic effective core potential for palladium or through a full four-component all-electron approach. Counterpoise corrected relative energies of stationary points are converged to within 0.1-0.2 kcal/mol as a function of the basis-set size. Our best estimate of kinetic and thermodynamic parameters is -8.1 (-8.3) kcal/mol for the formation of the reactant complex, 5.8 (3.1) kcal/mol for the activation energy relative to the separate reactants, and 0.8 (-1.2) kcal/mol for the reaction energy (zero-point vibrational energy-corrected values in parentheses). This agrees well with available experimental data. Our work highlights the importance of sufficient higher angular momentum polarization functions, f and g, for correctly describing metal-d-electron correlation and, thus, for obtaining reliable relative energies. We show that standard basis sets, such as LANL2DZ+ 1f for palladium, are not sufficiently polarized for this purpose and lead to erroneous CCSD(T) results. B3LYP is associated with smaller basis set superposition errors and shows faster convergence with basis-set size but yields relative energies (in particular, a reaction barrier) that are ca. 3.5 kcal/mol higher than the corresponding CCSD(T) values

Secondary UBVRI-CCD standard stars in the neighbourhood of Landolt standard stars

A list of 681 UBVRI secondary standard stars for CCD photometry is presented. Visual magnitude ranges from 9.7 to 19.4, and the B-V colour index varies from 1.15 to 1.97. The stars are grouped into 11 different fields, each of them is generally observable in a single CCD frame. The stars are located near Landolt UBVRI equatorial standards, accessible to telescopes in both hemispheres, and mainly within the 5 - 8 hours range of right ascension. Photometry, equatorial coordinates and finding charts are provided.

Resultados preliminares obtenidos a partir de una trampa Malaise situada en una zona mediterránea pirenaica

En este estudio se da cuenta de los distintos órdenes de artrópodos capturados mediante una trampa Malaise en Santa Coloma (Andorra) después de un año de muestreo. Han sido colectados 141.522 ejemplares pertenecientes a 20 órdenes distintos. El 99,5% corresponden a insectos, entre los cuales los dípteros (con el 74,1%), juntamente con los himenópteros (15,2%) y los homópteros (5,8%) constituyen más del 95% de las capturas realizadas. Se discute la fenología anual de los distintos grupos en el área de estudio y su relación con las circunstancias meteorológicas del año 1993. En general, las mayores abundancias de los principales grupos se registran entre la segunda mitad de la primavera y la primera mitad del verano debido a las condiciones xerotérmicas de dicha localidad.

Reduced microwave losses of YBa2Cu3O7_thin films on electro-optic LiNbO3 crystals

We report on the growth of epitaxial YBa2Cu3O7 thin films on X-cut LiNbO3 single crystals. The use of double CeO2/YSZ buffer layers allows a single in-plane orientation of YBa2Cu3O7, and results in superior superconducting properties. In particular, surface resistance Rs values of 1.4 m¿ have been measured at 8 GHz and 65 K. The attainment of such low values of Rs constitutes a key step toward the incorporation of high Tc materials as electrodes in photonic and acoustic devices.

Compsopogon coeruleus (Blabis) Montagne, (Rhodophyta). Ampliacion de su area de distribucion en la Peninsula Iberica

Compsopogon coeruleus es un alga filamentosa de amplia distribución en aguas tropicales y subtropicales (KRISHNAMURTHY,/. Lian. Soc. (Bot.) 5 8 : 2 0 7 - 2 2 2 , 1962). En el curso del estudio sobre las fuentes de la zona de Banyoles (Gerona) la hemos recolectado en la Font de la Carpa, UTM: 31 TDG 7 6 ...

Reduced microwave losses of YBa2Cu3O7_thin films on electro-optic LiNbO3 crystals

We report on the growth of epitaxial YBa2Cu3O7 thin films on X-cut LiNbO3 single crystals. The use of double CeO2/YSZ buffer layers allows a single in-plane orientation of YBa2Cu3O7, and results in superior superconducting properties. In particular, surface resistance Rs values of 1.4 m¿ have been measured at 8 GHz and 65 K. The attainment of such low values of Rs constitutes a key step toward the incorporation of high Tc materials as electrodes in photonic and acoustic devices.

Microwave spectrometry for the Evaluation of the structural integrity of metallic stents

Purpose: To assess the feasibility of a method based on microwave spectrometry to detect structural distortions of metallic stents in open air conditions and envisage the prospects of this approach toward possible medical applicability for the evaluation of implanted stents. Methods: Microwave absorbance spectra between 2.0 and 18.0 GHz were acquired in open air for the characterization of a set of commercial stents using a specifically design setup. Rotating each sample over 360º, 2D absorbance diagrams were generated as a function of frequency and rotation angle. To check our approach for detecting changes in stent length (fracture) and diameter (recoil), two specific tests were performed in open air. Finally, with a few adjustments, this same system provides 2D absorbance diagrams of stents immersed in a water-based phantom, this time over a bandwidth ranging from 0.2 to 1.8 GHz. Results: The authors show that metallic stents exhibit characteristic resonant frequencies in their microwave absorbance spectra in open air which depend on their length and, as a result, may reflect the occurrence of structural distortions. These resonances can be understood considering that such devices behave like dipole antennas in terms of microwave scattering. From fracture tests, the authors infer that microwave spectrometry provides signs of presence of Type I to Type IV stent fractures and allows in particular a quantitative evaluation of Type III and Type IV fractures. Recoil tests show that microwave spectrometry seems able to provide some quantitative assessment of diametrical shrinkage, but only if it involves longitudinal shortening. Finally, the authors observe that the resonant frequencies of stents placed inside the phantom shift down with respect to the corresponding open air frequencies, as it should be expected considering the increase of dielectric permittivity from air to water. Conclusions: The evaluation of stent resonant frequencies provided by microwave spectrometry allows detection and some quantitative assessment of stent fracture and recoil in open air conditions. Resonances of stents immersed in water can be also detected and their characteristic frequencies are in good agreement with theoretical estimates. Although these are promising results, further verifica tion in a more relevant phantom is required in order to foresee the real potential of this approach.

Id Gene regulation and function in the prosensory domains of the chicken inner ear: a link between Bmp Signaling and Atoh1

Bone morphogenetic proteins (Bmps) regulate the expression of the proneural gene Atoh1 and the generation of hair cells in the developing inner ear. The present work explored the role of Inhibitor of Differentiation genes (Id1-3) in this process. The results show that Id genes are expressed in the prosensory domains of the otic vesicle, along with Bmp4 and Bmp7. Those domains exhibit high levels of the phosphorylated form of Bmp-responding R-Smads (P-Smad1,5,8), and of Bmp-dependent Smad transcriptional activity as shown by the BRE-tk-EGFP reporter. Increased Bmp signaling induces the expression of Id1-3 along with the inhibition of Atoh1. Conversely, the Bmp antagonist Noggin or the Bmp-receptor inhibitor Dorsomorphin elicit opposite effects, indicating that Bmp signaling is necessary for Id expression and Atoh1 regulation in the otocyst. The forced expression of Id3 is sufficient to reduce Atoh1 expression and to prevent the expression of hair cell differentiation markers. Together, these results suggest that Ids are part of the machinery that mediates the regulation of hair cell differentiation exerted by Bmps. In agreement with that, during hair cell differentiation Bmp4 expression, P-Smad1,5,8 levels and Id expression are downregulated from hair cells. However, Ids are also downregulated from the supporting cells which contrarily to hair cells exhibit high levels of Bmp4 expression, P-Smad1,5,8, and BRE-tk-EGFP activity, suggesting that in these cells Ids escape from Bmp/Smad signaling. The differential regulation of Ids in time and space may underlie the multiple functions of Bmp signaling during sensory organ development.