Movement evaluation of overerupted upper molars with absolute anchorage: An in-vitro study

Introduction: The overeruption of upper molars due to the premature loss of antagonist teeth can be treated with the help of miniscrews. The aim of this study was to evaluate the movement of a typodont molar according to the biomechanical approach used with miniscrews. Study design: The study was conducted with four plaster models filled with typodont wax. In each model we used one absolute anchorage on the palatal side and another on the buccal side in different positions, thus generating four different biomechanical systems. A force of 150 g was applied to each side of the resin tooth. Periapical radiographs were taken preintrusion and immediately after completion of the intrusion. Photographs were taken in both the sagittal and occlusal planes every 3 min. The radiographic films and photographs were measured and compared. Results: A vertical movement of the molar was observed in all the models, with system 4 showing the greatest movement. Rotation in the occlusal plane only occurred in system 2, while in system 1 there was a change in the axial axis of 37 degrees. Conclusions: The anchorage site and the combination of forces applied may determine the resulting tooth movement

Supernumerary molars. A review of 53 cases

Supernumerary molars are not uncommon and may be found nearly anywhere in the dental alveolar arches. A series of 36 patients that presented with 53 supernumerary molars are reviewed. They occurred more frequently in the maxilla (86.8%), had little or no clinical significance, tended to be impacted, and were not associated with the impactation of the third molar. Four cases of maxillary fifth molars are described

Evaluation of the indication for surgical extraction of third molars according to the oral surgeon and the primary care dentist. Experience in the Master of Oral Surgery and Implantology at Barcelona University Dental School

Introduction: Third molar extraction is the most frequent procedure in oral surgery. The present study evaluates the indication of third molar extraction as established by the primary care dentist (PCD) and the oral surgeon, and compares the justification for extraction with the principal reason for patient consultation. Patients and method: A descriptive study was made of 319 patients subjected to surgical removal of a third molar in the context of the Master of Oral Surgery and Implantology (Barcelona University Dental School, Barcelona, Spain) between July 2004 and March 2005. The following parameters were evaluated: sex, age, molar, type of impaction, position according to the classifications of Pell and Gregory and of Winter, and the reasons justifying extraction. Results: The lower third molars were the most commonly extracted molars (73.7%). A total of 69.6% of the teeth were covered by soft tissues only. Fifty-six percent of the lower molars corresponded to Pell and Gregory Class IIB, while 42.1% were in the vertical position. The most common reason for patient reference to our Service of Oral Surgery on the part of the PCD was prophylactic removal (51.0% versus 46.1% in the case of the oral surgeon). Discussion and conclusions. Our results show prophylaxis to be the principal indication of third molar extraction, followed by orthodontic reasons. Regarding third molars with associated clinical symptoms or signs, infectious disease-including pericoronitis- was the pathology most often observed by the oral surgeon, followed by caries. This order of frequency was seen to invert in the case of third molars referred for extraction by the PCD. A vertical position predominated among the third molars with associated pathology

Bupivacaine 0.5 % versus articaine 4 % for the removal of lower third molars. A crossover randomized controlled trial

Objective: To compare the anesthetic action of 0.5% bupivacaine in relation to 4% articaine, both with 1:200,000 epinephrine, in the surgical removal of lower third molars. As a secondary objective hemodynamic changes using both anesthetics were analyzed. Study Design: Triple-blind crossover randomized clinical trial. Eighteen patients underwent bilateral removal of impacted lower third molars using 0.5% bupivacaine or 4% articaine in two different appointments. Preoperative, intraoperative and postoperative variables were recorded. Differences were assessed with McNemar tests and repeated measures ANOVA tests. Results: Both solutions exhibited similar latency times and intraoperative efficacy. Statistical significant lower pain levels were observed with bupivacaine between the fifth (p=0.011) and the ninth (p=0.007) postoperative hours. Bupivacaine provided significantly longer lasting soft tissue anesthesia (p<0.05). Systolic blood pressure and heart rate values were significantly higher with articaine. Conclusions: Bupivacaine could be a valid alternative to articaine especially due to its early postoperative pain prevention ability.

Validation of a computer-assisted system on classifying lower third molars

Objectives: The present study evaluates the reliability of the Radio Memory® software (Radio Memory; Belo Horizonte,Brasil.) on classifying lower third molars, analyzing intra- and interexaminer agreement of the results. Study Design: An observational, descriptive study of 280 lower third molars was made. The corresponding orthopantomographs were analyzed by two examiners using the Radio Memory® software. The exam was repeated 30 days after the first observation by each examiner. Both intra- and interexaminer agreement were determined using the SPSS v 12.0 software package for Windows (SPSS; Chicago, USA). Results: Intra- and interexaminer agreement was shown for both the Pell & Gregory and the Winter classifications, p<0.01, with 99% significant correlation between variables in all the cases. Conclusions: The use of Radio Memory® software for the classification of lower third molars is shown to be a valid alternative to the conventional method (direct evaluation on the orthopantomograph), for both clinical and investigational applications.

Development of advanced silicon radiation detectors for high energy physics and medical imaging

The 1st chapter of this work presents the different experiments and collaborations in which I am involved during my PhD studies of Physics. Following those descriptions, the 2nd chapter is dedicated to how the radiation affects the silicon sensors, as well as some experimental measurements carried out at CERN (Geneve, Schwitzerland) and IFIC (Valencia, Spain) laboratories. Besides the previous investigation results, this chapter includes the most recent scientific papers appeared in the latest RD50 (Research & Development #50) Status Report, published in January 2007, as well as some others published this year. The 3rd and 4th are dedicated to the simulation of the electrical behavior of solid state detectors. In chapter 3 are reported the results obtained for the illumination of edgeless detectors irradiated at different fluences, in the framework of the TOSTER Collaboration. The 4th chapter reports about simulation design, simulation and fabrication of a novel 3D detector developed at CNM for ions detection in the future ITER fusion reactor. This chapter will be extended with irradiation simulations and experimental measurements in my PhD Thesis.

Algunes observacions sobre pintures gironines d’època barroca de temàtica santnarcisiana

Descripció de les pintures que hi ha a la capella de Sant Narcís de l’església de Sant Feliu de Girona, què són d’època barroca. L’article s’escriu després d’una restauració de la capella, què dóna més lluminositat a les pintures. En el context de monogràfic dedicat a Sant Narcís

The concentration of foreigners in French schools: interaction effects in place?

This paper explores the existence of negative peer-group pressures derived from the concentration of foreigners in French lower secondary schools. Using different dependent variables (number of years spent in lower secondary education, grades in 4th ‘and 3rd year and track election in upper secondary schooling) the analyses indicate that the much disputed existence of significant and negative effects of the concentration of foreign students in schools depends on the method used for the estimation. If we assume that the concentration of foreigners is a random and exogenous process, then the multivariate analyses confirm negative interactions. If, on the contrary, we question the assumption that this contextual information is not end the result of prior sorting mechanisms of individuals across social spaces, the concentration of foreigners has no statistical impact on attainment.

III Congreso ibérico sobre gestión y planificación del agua. La directiva marco del agua: realidades y futuros. Sevilla, del 13 al 17 de noviembre de 2002

Entre els dies 13 i 17 de novembre de 2002 va tenir lloc a la ciutat de Sevilla el III Congrés Ibèric sobre Gestió i Planificació de l’Aigua, que, en aquesta ocasió, portava per títol «La Directiva Marc de l’Aigua: realitats i futurs». El congrés fou organitzat per la Fundación Nueva Cultura del Agua, amb la col•laboració de la Universidad de Sevilla i d’una àmplia sèrie d’institucions relacionades amb la investigació o gestió d’aquest recurs. Considerant l’anàlisi i la diagnosi de la situació actual contingudes a les edicions anteriors (Saragossa 1998 i Porto 2000) i l’ampli debat dels últims anys, el III Congrés Ibèric es caracteritza per un plantejament d’avenç i propostes i per incloure alguns dels aspectes de la política de l’aigua menys atesos fins aleshores

Plan de seguridad y salud para el suministro y montaje del Parque Eólico Rancho Viejo en el T.M. de Medina-Sidonia (Cádiz)

No hace más de 3 años se podía leer en las revistas especializadas que España había pasado a ocupar el tercer puesto en el ranking mundial por potencia eólica instalada. La industria eólica española a su vez ha pasado a ocupar el tercer puesto en la fabricación e instalación de aerogeneradores, con una cuota de mercado del 13%, siendo así un sector con gran capacidad de exportación. Por otra parte, tras diez años de promulgación de la Ley 31/95, de 8 de noviembre, de Prevención de Riesgos Laborales, y después su desarrollo reglamentario, es un hecho incontestable que, pese a todo, y a los ingentes esfuerzos realizados por los distintos actores implicados en la prevención de riesgos laborales (Estado, Comunidades Autónomas, Agentes Sociales, Entidades especializadas, etcetera), existe un sector como el de la construcción que, constituyendo uno de los ejes del crecimiento económico de nuestro país, está sometido a unos riesgos especiales y continúa registrando una siniestralidad laboral muy notoria por sus cifras y gravedad. La legislación de prevención, los manuales sobre las distintas disciplinas preventivas, los libros especializados, los expertos... han abordado ya, con mayor o menor acierto, muchas de las cuestiones generales y específicas que afectan a la seguridad y salud: la evaluación de riesgos, las medidas higiénicas, los equipos de trabajo y equipos de protección individual, la planificación, la formación, los servicios de prevención , los sistemas de gestión de la prevención, las auditorías ... forman parte de los contenidos que se han ido creando en torno a este tema. No obstante, resulta de gran interés la elaboración de un estudio de Seguridad y Salud, en el que partiendo de un desarrollo técnico concreto, pero sobre todo integral, es decir, que comprenda todas las fases para el suministrp e instalación de aerogeneradores para un parque eólico, vayamos desgranando cada uno de los puntos desarrollados en su construcción. Entre las conclusiones más destacadas de este trabajo, se encuentra la definición de las condiciones relativas a la prevención de accidentes y enfermedades laborales durante la ejecución de los trabajos de suministro e instalación de un parque eólico y la gestión de su prevención, las características de las instalaciones preceptivas para higiene y bienestar de los trabajadores, así como directrices básicas mínimas, que deben reflejarse y desarrollarse en el Plan de Seguridad y Salud que las empresas contratistas deberán presentar para su aprobación por el director de obra, antes del comienzo de los trabajos, de forma que sea posible la disminución de accidentes laborales así como evitar las posibles sanciones administrativas y/o penales.

Estudi i primera fase per la implementació del FOFB al Sincrotró ALBA

Aquest treball és la culminació de les pràctiques realitzades al sincrotró ALBA. Situat a Cerdanyola del Vallès, ALBA és un accelerador de 3a generació que permet emmagatzemar un feix d'electrons confinat de fins a 400 mA a 3GeV d'energia, amb l'objectiu d'obtenir llum a partir dels girs provocats al feix. Els sincrotrons moderns com el d'ALBA, el que pretenen és aconseguir un major control i estabilitat de la llum. Per aconseguir-ho, cal que el feix d'electrons que creen la llum estigui controlat al màxim i la seva òrbita sigui estable. Amb aquest objectiu els sincrotrons estant implementant sistemes de Fast Orbit FeedBack (FOFB) o sistemes realimentats de correcció ràpida de l'òrbita, per realitzar correccions d'almenys 100Hz que estabilitzin el feix d'electrons amb menys d'un 10% de l'amplada del feix (5-10μm). El treball exposa el desenvolupament d'una part del sistema de correcció ràpida de l'òrbita dels electrons (FOFB) que s'està duent a terme al sincrotró ALBA. Concretament, s’han revisat els estudis previs realitzats durant la fase de disseny del sincrotró, s’han recalculat funcions de transferència i retards de tots els elements involucrats al sistema. També s’han realitzat simulacions per confirmar la viabilitat del sistema amb les noves dades i finalment s’ha desenvolupat part de la unitat de control determinant el Hardware i s'ha adquirit dades que permetran analitzar el soroll de l'òrbita que en futurs treballs determinaran millor l'algorisme de la unitat de control.

Quality of life following third molar removal under conscious sedation

Aim: The aim of this study was to assess quality of life (QoL) and degree of satisfaction among outpatients subjected to surgical extraction of all four third molars under conscious sedation. A second objective was to describe the evolution of self-reported pain measured in a visual analogue scale (VAS) in the 7 days after extraction. Study design: Fifty patients received a questionnaire assessing social isolation, working isolation, eating and speaking ability, diet modifications, sleep impairment, changes in physical appearance, discomfort at suture removal and overall satisfaction at days 4 and 7 after surgery. Pain was recorded by patients on a 100-mm pain visual analogue scale (VAS) every day after extraction until day 7. Results: Thirty-nine patients fulfilled correctly the questionnaire. Postoperative pain values suffered small fluctuations until day 5 (range: 23 to 33 mm in a 100-mm VAS), when dicreased significantly. A positive association was observed between difficult ranked surgeries and higher postoperative pain levels. The average number of days for which the patient stopped working was 4.9. Conclusion: The removal of all third molars in a single appointment causes an important deterioration of the patient"s QoL during the first postoperative week, especially due to local pain and eating discomfort.

En el destierro del arte

En los años 30 del siglo XX, mientras las primeras vanguardias artísticas recorren Europa, María Zambrano y Martin Heidegger denuncian la pérdida del lugar del arte. El arte, para Zambrano, ya no da a ver, sólo se ve como arte. Por ello, perdió la tierra, está desterrado. Para Heidegger, por su parte, muchas de las obras de arte del siglo XX no pueden establecer un mundo y producir la tierra. En ese destierro del arte nos situaremos para interrogar el papel de la música en el pensamiento de ambos filósofos

Archaeological and archaeomagnetic dating at a site from the ager Tarraconensis (Tarragona, Spain): El Vila-sec Roman pottery

A very accurate archaeological dating of a Roman site in NE Spain (El Vila-sec) was made based on the typology of pottery artifacts. Three different phases were identifi ed with activity ranging from the mid- 1st century BC to the early-3rd century AD. Analyses of bricks from kilns at El Vila-sec produced data on their stored archaeomagnetic vector. These data were compared with the secular variation curve for the Iberian Peninsula and the SCHA.DIF.3K regional archaeomagnetic model. Both, the reference curve and the model, produced probability distributions for the final period of use for two kilns from the second archaeological phase that were not used during the third phase. At a 95% con fidence level, both time distributions cover a wide chronological range including the presumed archaeological age. Both the Iberian secular variation curve and the SCHA.DIF.3K regional model proved to be suitable models for dating the site, although on their own they do not produce a single unambiguous solution. This archaeomagnetic approach could also be applied to neighbouring archaeological sites that have an imprecise archaeological age.