Occurrence and bioaccumulation study of PCDD and PCDF from mineral feed additives

Occurrence of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) was evaluated in sepiolite as a widely employed binder and anti-caking agent for animal feed. Also, naturally contaminated kaolinitic clay was used for comparative purposes. Since sepiolite shows remarkable adsorption properties, particular interest was paid to the extraction steps as they become critical for the final determination of these pollutants in such matrixes. Furthermore, classical Soxhlet extraction using different extracting strategies as well as acid treatment were carried out with simultaneous liquid-liquid extraction. Results obtained depended on the extraction procedure applied. Acid treatment or Soxhlet extraction using a mixture of toluene:ethanol as solvent allowed to reach the minimum requirements of recovery rates. However, Soxhlet extraction using a mixture cyclohexane:toluene as extracting solvent did not allow to comply with minimum specifications for recovery. Significant differences were obtained in TEQ units when acid treatment was applied in comparison to Soxhlet extraction. This fact can be explained because the use of drastic acid conditions allows removing strongly adsorbed analytes which can be uniquely extracted after a total destruction of the crystalline structure of sepiolite. On the contrary, Soxhlet extraction was not able to destroy the structure of sepiolite and as a consequence the PCDDs/Fs were strongly adsorbed in the internal structure of the mineral. From biological point of view the availability of these toxicants constitutes a critical aspect playing an important role in the final decision choosing particular analytical procedures. Then, acid conditions in the digestive tract should be taken into account. In this scenario, a bioaccumulation study was conducted to evaluate the transference of PCDDs/PCDFs from the sepiolite into the animal tissues when fed with feed containing sepiolite. To this end, chickens were used as a model to examine the bioavailability of PCDDs/PCDFs. Four groups of chickens were exposed through their diet to a control feed, feed with 3% w/w sepiolite as additive, feed contaminated with PCDDs/PCDFs at concentration around 2.8 pg WHO-TEQ/g and feed with 2% of a contaminated kaolinitic clay (460 pg TEQ/g mineral). Livers of the four studied groups were analyzed throughout the exposure period. Results of this trial showed that the performance of broilers was not affected by the presence of dioxins at levels tested, and chickens did not show any abnormal behaviour. Dioxins intentionally added to the diet were absorbed and accumulated in the liver in a significant manner, whereas the PCDDs/Fs from sepiolite were not available for chickens since livers from broilers fed 3% sepiolite presented similar WHO-TEQ values than those from broilers fed control diet.

External sources of innovation and industry-university interaction:evidence from Spanish firms

This paper is about the firm innovation process and the cooperation of the innovative firms with other firms and public institutions. A special attention is paid to the cooperation with universities. We use the Technological Innovation Survey (TIS) from the Instituto Nacional de Estadística (Spain) in order to obtain data for 4,159 innovative firms. Our results show that firm's cooperation activities are closely linked to the characteristics of the industry and the firm as well as to the origin of public funds for R&D activities. Key words: Innovation, universities, Spanish economy. JEL code: O31, I20, L60

Sources of Competitiveness in Tourist Local Systems

At the end of the XIX Century, Marshall described the existence of some concentrations of small and medium enterprises specialised in a specific production activity in certain districts of some industrial English cities. Starting from his contribute, Italian scholars have paid particular attention to this local system of production coined by Marshall under the term industrial district. In other countries, different but related territorial models have played a central role as the milieu or the geographical industrial clusters. Recently, these models have been extended to non-industrial fields like culture, rural activities and tourism. In this text, we explore the extension of these territorial models to the study of tourist activities in Italy, using a framework that can be easily applied to other countries or regions. The paper is divided in five sections. In the first one, we propose a review of the territorial models applied to tourism industry. In the second part, we construct a tourist filiere and we apply a methodology for the identification of local systems through GIS tools. Thus, taxonomy of the Italian Tourist Local Systems is presented. In the third part, we discuss about the sources of competitiveness of these Tourist Local Systems. In the forth section, we test a spatial econometrics model regarding different kinds of Italian Tourist Local Systems (rural systems, arts cities, tourist districts) in order to measure external economies and territorial networks. Finally, conclusions and policy implications are exposed.

Understanding sources of the change in international business cycles

Macroeconomic activity has become less volatile over the past three decades in most G7 economies. Current literature focuses on the characterization of the volatility reduction and explanations for this so called "moderation" in each G7 economy separately. In opposed to individual country analysis and individual variable analysis, this paper focuses on common characteristics of the reduction and common explanations for the moderation in G7 countries. In particular, we study three explanations: structural changes in the economy, changes in common international shocks and changes in domestic shocks. We study these explanations in a unified model structure. To this end, we propose a Bayesian factor structural vector autoregressive model. Using the proposed model, we investigate whether we can find common explanations for all G7 economies when information is pooled from multiple domestic and international sources. Our empirical analysis suggests that volatility reductions can largely be attributed to the decline in the magnitudes of the shocks in most G7 countries while only for the U.K., the U.S. and Italy they can partially be attributed to structural changes in the economy. Analyzing the components of the volatility, we also find that domestic shocks rather than common international shocks can account for a large part of the volatility reduction in most of the G7 countries. Finally, we find that after mid-1980s the structure of the economy changes substantially in five of the G7 countries: Germany, Italy, Japan, the U.K. and the U.S..

Innovation sources and productivity in Catalonian firms: a quantile regression analysis

This paper explores the effects of two main sources of innovation -intramural and external R&D- on the productivity level in a sample of 3,267 Catalonian firms. The data set used is based on the official innovation survey of Catalonia which was a part of the Spanish sample of CIS4, covering the years 2002-2004. We compare empirical results by applying usual OLS and quantile regression techniques both in manufacturing and services industries. In quantile regression, results suggest different patterns at both innovation sources as we move across conditional quantiles. The elasticity of intramural R&D activities on productivity decreased when we move up the high productivity levels both in manufacturing and services sectors, while the effects of external R&D rise in high-technology industries but are more ambiguous in low-technology and knowledge-intensive services. JEL codes: O300, C100, O140. Keywords: Innovation sources, R&D, Productivity, Quantile regression

Innovation sources and productivity: a quantile regression analysis

This paper explores the effects of two main sources of innovation —intramural and external R&D— on the productivity level in a sample of 3,267 Catalan firms. The data set used is based on the official innovation survey of Catalonia which was a part of the Spanish sample of CIS4, covering the years 2002-2004. We compare empirical results by applying usual OLS and quantile regression techniques both in manufacturing and services industries. In quantile regression, results suggest different patterns at both innovation sources as we move across conditional quantiles. The elasticity of intramural R&D activities on productivity decreased when we move up the high productivity levels both in manufacturing and services sectors, while the effects of external R&D rise in high-technology industries but are more ambiguous in low-technology and services industries.

Innovation sources and productivity in Catalonian firms: a quantile regression analysis

This paper explores the effects of two main sources of innovation - intramural and external R&D— on the productivity level in a sample of 3,267 Catalonian firms. The data set used is based on the official innovation survey of Catalonia which was a part of the Spanish sample of CIS4, covering the years 2002-2004. We compare empirical results by applying usual OLS and quantile regression techniques both in manufacturing and services industries. In quantile regression, results suggest different patterns at both innovation sources as we move across conditional quantiles. The elasticity of intramural R&D activities on productivity decreased when we move up the high productivity levels both in manufacturing and services sectors, while the effects of external R&D rise in high-technology industries but are more ambiguous in low-technology and knowledge-intensive services. JEL codes: O300, C100, O140 Keywords: Innovation sources, R&D, Productivity, Quantile Regression

Assessing the quality of alternative energy sources: Energy Return On the Investment (EROI), the metabolic pattern of societies and energy statistics

This paper presents an initial challenge to tackle the every so "tricky" points encountered when dealing with energy accounting, and thereafter illustrates how such a system of accounting can be used when assessing for the metabolic changes in societies. The paper is divided in four main sections. The first three, present a general discussion on the main issues encountered when conducting energy analyses. The last section, subsequently, combines this heuristic approach to the actual formalization of it, in quantitative terms, for the analysis of possible energy scenarios. Section one covers the broader issue of how to account for the relevant categories used when accounting for Joules of energy; emphasizing on the clear distinction between Primary Energy Sources (PES) (which are the physical exploited entities that are used to derive useable energy forms (energy carriers)) and Energy Carriers (EC) (the actual useful energy that is transmitted for the appropriate end uses within a society). Section two sheds light on the concept of Energy Return on Investment (EROI). Here, it is emphasized that, there must already be a certain amount of energy carriers available to be able to extract/exploit Primary Energy Sources to thereafter generate a net supply of energy carriers. It is pointed out that this current trend of intense energy supply has only been possible to the great use and dependence on fossil energy. Section three follows up on the discussion of EROI, indicating that a single numeric indicator such as an output/input ratio is not sufficient in assessing for the performance of energetic systems. Rather an integrated approach that incorporates (i) how big the net supply of Joules of EC can be, given an amount of extracted PES (the external constraints); (ii) how much EC needs to be invested to extract an amount of PES; and (iii) the power level that it takes for both processes to succeed, is underlined. Section four, ultimately, puts the theoretical concepts at play, assessing for how the metabolic performances of societies can be accounted for within this analytical framework.

Bioaccumulation of 210Pb and 210Po in fish tissues in a radioactive naturally enhanced area: the Peníscola marsh (Castelló, Spain)

210Pb and 210Po concentration in fish tissues from Peníscola marsh were analyzed, being this area a radioactive naturally enhanced marsh located in the East coast of Spain. Results showed that 210Po accumulation in tissues could reach values ranging from 28±8 Bq kg-1 in muscle of Cyprinus carpio, to 8558±6378 Bq kg-1 in gut content of Chelon labrosus. On the other hand, 210Pb concentrations ranged from 8±4 Bq kg-1 in muscle of Cyprinus carpio, to 475±481 Bq kg-1 in gut content of Chelon labrosus. Bioaccumulation pattern is generally 210Po&210Pb, except in spine, where more 210Pb than 210Po is accumulated. When comparing our samples to those collected as blanks, individuals from Peníscola marsh showed an enrichment in 210Po and 210Pb in their tissues compared to the blanks. Bioaccumulation factors showed that feeding is the major input route of 210Pb and 210Po into the fish body. Highest values of 210Pb and 210Po concentration in tissues were found on Chelon labrosus and Carassius auratus, being Cyprinus carpio the species with the lowest average values of 210Pb and 210Po accumulation.

The Role of Information in Contemporary Migration. More Sources but Less Informed

La migració internacional contemporània és integrada en un procés d'interconnexió global definit per les revolucions del transport i de les tecnologies de la informació i la comunicació. Una de les conseqüències d'aquesta interconnexió global és que les persones migrants tenen més capacitat per a processar informació tant abans com després de marxar. Aquests canvis podrien tenir implicacions inesperades per a la migració contemporània pel que fa a la capacitat de les persones migrants per a prendre decisions més informades, la reducció de la incertesa en contextos migratoris, el desdibuixament del concepte de distància o la decisió d'emigrar cap a llocs més llunyans. Aquesta recerca és important, ja que la manca de coneixement sobre aquesta qüestió podria contribuir a fer augmentar la distància entre els objectius de les polítiques de migració i els seus resultats. El paper que tenen els agents de la informació en els contextos migratoris també podria canviar. En aquest escenari, perquè les polítiques de migració siguin més efectives, s'haurà de tenir en compte la major capacitat de la població migrant de processar la informació i les fonts d'informació en què es confia. Aquest article demostra que l'equació més informació equival a més ben informat no es compleix sempre. Fins i tot en l'era de la informació, les fonts no fiables, les expectatives falses, la sobreinformació i els rumors encara són presents en els contextos migratoris. Tanmateix, defensem l'argument que aquests efectes no volguts es podrien reduir complint quatre requisits de la informació fiable: que sigui exhaustiva, que sigui rellevant, que s'hi confiï i que sigui actualitzada.

Conformations of poly{G}-poly{C} π stacks with high hole mobility

Charge transfer properties of DNA depend strongly on the π stack conformation. In the present paper, we identify conformations of homogeneous poly-{G}-poly-{C} stacks that should exhibit high charge mobility. Two different computational approaches were applied. First, we calculated the electronic coupling squared, V2, between adjacent base pairs for all 1 ps snapshots extracted from 15 ns molecular dynamics trajectory of the duplex G15. The average value of the coupling squared 〈 V2 〉 is found to be 0.0065 eV2. Then we analyze the base-pair and step parameters of the configurations in which V2 is at least an order of magnitude larger than 〈 V2 〉. To obtain more consistent data, ∼65 000 configurations of the (G:C)2 stack were built using systematic screening of the step parameters shift, slide, and twist. We show that undertwisted structures (twist<20°) are of special interest, because the π stack conformations with strong electronic couplings are found for a wide range of slide and shift. Although effective hole transfer can also occur in configurations with twist=30° and 35°, large mutual displacements of neighboring base pairs are required for that. Overtwisted conformation (twist38°) seems to be of limited interest in the context of effective hole transfer. The results may be helpful in the search for DNA based elements for nanoelectronics

Distortion control for delay-sensitive sources

We investigate the problem of finding minimum-distortion policies for streaming delay-sensitive but distortion-tolerant data. We consider cross-layer approaches which exploit the coupling between presentation and transport layers. We make the natural assumption that the distortion function is convex and decreasing. We focus on a single source-destination pair and analytically find the optimum transmission policy when the transmission is done over an error-free channel. This optimum policy turns out to be independent of the exact form of the convex and decreasing distortion function. Then, for a packet-erasure channel, we analytically find the optimum open-loop transmission policy, which is also independent of the form of the convex distortion function. We then find computationally efficient closed-loop heuristic policies and show, through numerical evaluation, that they outperform the open-loop policy and have near optimal performance.

Sources of comparative advantage in polluting industries

We study the determinants of comparative advantage in polluting industries. We combine data on environmental policy at the country level with data on pollution intensity at the industry level to show that countries with laxer environmental regulation have a comparative advantage in polluting industries. Further, we address the potential problem of reverse causality. We propose an instrument for environmental regulation based on meteorological determinants of pollution dispersion identified by the atmospheric pollution literature. We find that the effect of environmental regulation on the pattern of trade is causal and comparable in magnitude to the effect of physical and human capital.

Sources of comparative advantage in polluting industries (with appendix)

We study the determinants of comparative advantage in polluting industries. We combine dataon environmental policy at the country level with data on pollution intensity at the industry levelto show that countries with laxer environmental regulation have a comparative advantage in polluting industries. Further, we address the potential problem of reverse causality. We propose aninstrument for environmental regulation based on meteorological determinants of pollution dispersion identified by the atmospheric pollution literature. We find that the effect of environmentalregulation on the pattern of trade is causal and comparable in magnitude to the effect of physicaland human capital.