Audit firm tenure and qualified opinions: New evidence from Spain

The 2010 Green Paper on Audit Policy by the European Commission has explicitly questioned the sufficiency of audit rotation rules established by European Union Members to guarantee auditor independence. In addition, the Paper clearly states that more research is needed regarding the effects of long audit tenures on independence. In this article, we have replicated the research by Ruiz-Barbadillo, Gómez-Aguilar, and Biedma (2005) about the effects of audit firm tenure on independence with more updated data. However, unlike them, we have performed panel data estimations instead of pooled regression. Our approach allows for a better control of individual unobserved heterogeneity, thus reducing potential problems caused by omitted variable bias. While Ruiz-Barbadillo et al. reported an unexpected positive effect of tenure on the likelihood of audit qualifications, we do not show any significant effect of tenure on the opinion of the audit report. Our results are robust to various sensitivity analyses.

Energy efficiency determinants: An empirical analysis of Spanish innovative firms

This paper examines the extent to which innovative Spanish firms pursue improvements in energy efficiency (EE) as an objective of innovation. The increase in energy consumption and its impact on greenhouse gas emissions justifies the greater attention being paid to energy efficiency and especially to industrial EE. The ability of manufacturing companies to innovate and improve their EE has a substantial influence on attaining objectives regarding climate change mitigation. Despite the effort to design more efficient energy policies, the EE determinants in manufacturing firms have been little studied in the empirical literature. From an exhaustive sample of Spanish manufacturing firms and using a logit model, we examine the energy efficiency determinants for those firms that have innovated. To carry out the econometric analysis, we use panel data from the Community Innovation Survey for the period 2008‐2011. Our empirical results underline the role of size among the characteristics of firms that facilitate energy efficiency innovation. Regarding company behaviour, firms that consider the reduction of environmental impacts to be an important objective of innovation and that have introduced organisational innovations are more likely to innovate with the objective of increasing energy efficiency. Keywords: energy efficiency, corporate targets, innovation, Community Innovation Survey. JEL Classification: Q40, Q55, O31

The impact of FTAs on MENA trade in agricultural and industrial products

This paper analyses the impact of Free Trade Agreements (FTAs) on Middle East and North African Countries (MENA) trade for the period 1994-2010. The analysis distinguishes between industrial and agricultural trade to take into account the different liberalisation schedules. An augmented gravity model is estimated using up-to-date panel data techniques to control for all time-invariant bilateral factors that influence bilateral trade as well as for the so-called multilateral resistance factors. We also control for the endogeneity of the agreements and test for self-selection bias due to the presence of zero trade in our sample. The main findings indicate that North-South-FTAs and South-South- FTAs have a differential impact in terms of increasing trade in MENA countries, with the former being more beneficial in terms of exports for MENA countries, but both showing greater global market integration. We also find that FTAs that include agricultural products, in which MENA countries have a clear comparative advantage, have more favourable effects for these countries than those only including industrial products. JEL code: F10, F15

Productivity, Technical eficiency and internationalisation of the Spanish chemical sector

relationship between productivity and international position of Spanish chemical firms in the period 2005-2011. The goal is to determine whether companies that follow and international strategy, either with exports or by investment in foreign countries obtain greater productivity growth than these that do not operate in global market. For this purpose a panel data set with microdata has been created. A preliminary analysis of the evolution of productivity growth in the sector is carried out. The measurement of Total Factor Productivity is performed. With the estimated TFP we analyze the differentials in productivity growth, comparing the effects of export and investment behavior with non-international firms.

Modeling usage of medical care services: the medical expenditure panel survey data, 1996-2000

We explore the determinants of usage of six different types of health care services, using the Medical Expenditure Panel Survey data, years 1996-2000. We apply a number of models for univariate count data, including semiparametric, semi-nonparametric and finite mixture models. We find that the complexity of the model that is required to fit the data well depends upon the way in which the data is pooled across sexes and over time, and upon the characteristics of the usage measure. Pooling across time and sexes is almost always favored, but when more heterogeneous data is pooled it is often the case that a more complex statistical model is required.

Is real GDP stationary? Evidence from a panel unit root test with cross-sectional dependence and historical data

We use historical data that cover more than one century on real GDP for industrial countries and employ the Pesaran panel unit root test that allows for cross-sectional dependence to test for a unit root on real GDP. We find strong evidence against the unit root null. Our results are robust to the chosen group of countries and the sample period. Key words: real GDP stationarity, cross-sectional dependence, CIPS test. JEL Classification: C23, E32

Dynamic graphics of parametrically linked multivariate methods used in compositional data analysis

Many multivariate methods that are apparently distinct can be linked by introducing oneor more parameters in their definition. Methods that can be linked in this way arecorrespondence analysis, unweighted or weighted logratio analysis (the latter alsoknown as "spectral mapping"), nonsymmetric correspondence analysis, principalcomponent analysis (with and without logarithmic transformation of the data) andmultidimensional scaling. In this presentation I will show how several of thesemethods, which are frequently used in compositional data analysis, may be linkedthrough parametrizations such as power transformations, linear transformations andconvex linear combinations. Since the methods of interest here all lead to visual mapsof data, a "movie" can be made where where the linking parameter is allowed to vary insmall steps: the results are recalculated "frame by frame" and one can see the smoothchange from one method to another. Several of these "movies" will be shown, giving adeeper insight into the similarities and differences between these methods

Dynamic graphics of parametrically linked multivariate methods used in compositional data analysis

Many multivariate methods that are apparently distinct can be linked by introducing oneor more parameters in their definition. Methods that can be linked in this way arecorrespondence analysis, unweighted or weighted logratio analysis (the latter alsoknown as "spectral mapping"), nonsymmetric correspondence analysis, principalcomponent analysis (with and without logarithmic transformation of the data) andmultidimensional scaling. In this presentation I will show how several of thesemethods, which are frequently used in compositional data analysis, may be linkedthrough parametrizations such as power transformations, linear transformations andconvex linear combinations. Since the methods of interest here all lead to visual mapsof data, a "movie" can be made where where the linking parameter is allowed to vary insmall steps: the results are recalculated "frame by frame" and one can see the smoothchange from one method to another. Several of these "movies" will be shown, giving adeeper insight into the similarities and differences between these methods.

The dynamic adjustment of local government budgets : Does Spain behave differently?

[spa] El objetivo de este trabajo es analizar si los municipios españoles se ajustan en presencia de un shock presupuestario y (si es así) qué elementos del presupuesto son los que realizan el ajuste. La metodología utilizada para contestar estas preguntas es un mecanismo de corrección del error, VECM, que estimamos con un panel de datos de los municipios españoles durante el período 1988-2006. Nuestros resultados confirman que, en primer lugar, los municipios se ajustan en presencia de un shock fiscal (es decir, el déficit es estacionario en el largo plazo). En segundo lugar, obtenemos que cuando el shock afecta a los ingresos el ajuste lo soporta principalmente el municipio reduciendo el gasto, las transferencias tienen un papel muy reducido en este proceso de ajuste. Por el contrario, cuando el shock afecta al gasto, el ajuste es compartido en términos similares entre el municipio – incrementado los impuestos – y los gobiernos de niveles superiores – incrementando las transferencias. Estos resultados sugieren que la viabilidad de las finanzas pública locales es factible con diferentes entornos institucionales.

The dynamic adjustment of local government budgets : Does Spain behave differently?

[spa] El objetivo de este trabajo es analizar si los municipios españoles se ajustan en presencia de un shock presupuestario y (si es así) qué elementos del presupuesto son los que realizan el ajuste. La metodología utilizada para contestar estas preguntas es un mecanismo de corrección del error, VECM, que estimamos con un panel de datos de los municipios españoles durante el período 1988-2006. Nuestros resultados confirman que, en primer lugar, los municipios se ajustan en presencia de un shock fiscal (es decir, el déficit es estacionario en el largo plazo). En segundo lugar, obtenemos que cuando el shock afecta a los ingresos el ajuste lo soporta principalmente el municipio reduciendo el gasto, las transferencias tienen un papel muy reducido en este proceso de ajuste. Por el contrario, cuando el shock afecta al gasto, el ajuste es compartido en términos similares entre el municipio – incrementado los impuestos – y los gobiernos de niveles superiores – incrementando las transferencias. Estos resultados sugieren que la viabilidad de las finanzas pública locales es factible con diferentes entornos institucionales.

Cenozoic evolution of eastern Iberia: structural data and dynamic model.

Iberia underwent intraplate deformation during the Mesozoic and Cenozoic. In eastem Ibena, compression took place during the Palaeogene and early Miocene, giving rise to the Iberian Chain, and extension started during the early Miocene in the coastal areas and the Valencia trough; during early Miocene compression continued in the western Iberian Chain whereas extension had started in the eastern Iberian Chain. From the kinematic data obtained from the major compressional and extensional structures formed dunng the Cenozoic, a simple dynamic model using Bott's (1959) formula is presented. The results show that both extension and compression may have been produced assuming a main horizontal stress-axis approximately N-S, in a similar direction that the convergence between Europe, Ibena and Afnca dunng the Cenozoic.

Sobre la fiabilidad de los datos de renta en el Panel de Hogares de la Unión Europea (PHOGUE, 1994)

Este trabajo tiene por objetivo evaluar la fiabilidad de los datos de renta procedentes de la primera Ola del PHOGUE (Panel de Hogares de la Unión Europea) de 1994, versión nacional del Production Data

DynBTS Dynamic Bug Tracker System

L'objectiu final d'aquest projecte és realitzar un Sistema Traçador d' Errors, però potser mésimportant és l'objectiu d'aprendre noves tecnologies, que sovint estan a disposició de l'usuari però l'usuari les desconeix.

Developing methodologies to allow the robust prediction dynamic context dominated by perturbations

El principal objectiu del projecte era desenvolupar millores conceptuals i metodològiques que permetessin una millor predicció dels canvis en la distribució de les espècies (a una escala de paisatge) derivats de canvis ambientals en un context dominat per pertorbacions. En un primer estudi, vàrem comparar l'eficàcia de diferents models dinàmics per a predir la distribució de l'hortolà (Emberiza hortulana). Els nostres resultats indiquen que un model híbrid que combini canvis en la qualitat de l'hàbitat, derivats de canvis en el paisatge, amb un model poblacional espacialment explícit és una aproximació adequada per abordar canvis en la distribució d'espècies en contextos de dinàmica ambiental elevada i una capacitat de dispersió limitada de l'espècie objectiu. En un segon estudi abordarem la calibració mitjançant dades de seguiment de models de distribució dinàmics per a 12 espècies amb preferència per hàbitats oberts. Entre les conclusions extretes destaquem: (1) la necessitat de que les dades de seguiment abarquin aquelles àrees on es produeixen els canvis de qualitat; (2) el biaix que es produeix en la estimació dels paràmetres del model d'ocupació quan la hipòtesi de canvi de paisatge o el model de qualitat d'hàbitat són incorrectes. En el darrer treball estudiarem el possible impacte en 67 espècies d’ocells de diferents règims d’incendis, definits a partir de combinacions de nivells de canvi climàtic (portant a un augment esperat de la mida i freqüència d’incendis forestals), i eficiència d’extinció per part dels bombers. Segons els resultats dels nostres models, la combinació de factors antropogènics del regim d’incendis, tals com l’abandonament rural i l’extinció, poden ser més determinants per als canvis de distribució que els efectes derivats del canvi climàtic. Els productes generats inclouen tres publicacions científiques, una pàgina web amb resultats del projecte i una llibreria per a l'entorn estadístic R.

Dynamic estimation of three-dimensional cerebrovascular deformation from rotational angiography

Purpose: The objective of this study is to investigate the feasibility of detecting and quantifying 3D cerebrovascular wall motion from a single 3D rotational x-ray angiography (3DRA) acquisition within a clinically acceptable time and computing from the estimated motion field for the further biomechanical modeling of the cerebrovascular wall. Methods: The whole motion cycle of the cerebral vasculature is modeled using a 4D B-spline transformation, which is estimated from a 4D to 2D + t image registration framework. The registration is performed by optimizing a single similarity metric between the entire 2D + t measured projection sequence and the corresponding forward projections of the deformed volume at their exact time instants. The joint use of two acceleration strategies, together with their implementation on graphics processing units, is also proposed so as to reach computation times close to clinical requirements. For further characterizing vessel wall properties, an approximation of the wall thickness changes is obtained through a strain calculation. Results: Evaluation on in silico and in vitro pulsating phantom aneurysms demonstrated an accurate estimation of wall motion curves. In general, the error was below 10% of the maximum pulsation, even in the situation when substantial inhomogeneous intensity pattern was present. Experiments on in vivo data provided realistic aneurysm and vessel wall motion estimates, whereas in regions where motion was neither visible nor anatomically possible, no motion was detected. The use of the acceleration strategies enabled completing the estimation process for one entire cycle in 5-10 min without degrading the overall performance. The strain map extracted from our motion estimation provided a realistic deformation measure of the vessel wall. Conclusions: The authors' technique has demonstrated that it can provide accurate and robust 4D estimates of cerebrovascular wall motion within a clinically acceptable time, although it has to be applied to a larger patient population prior to possible wide application to routine endovascular procedures. In particular, for the first time, this feasibility study has shown that in vivo cerebrovascular motion can be obtained intraprocedurally from a 3DRA acquisition. Results have also shown the potential of performing strain analysis using this imaging modality, thus making possible for the future modeling of biomechanical properties of the vascular wall.