Industrial agglomerations and wage gradients: the Spanish economy in the interwar period

This paper gives new evidence on the relationship between integration and industrial agglomeration in the presence of scale economies, by testing directly one of the predictions that can be derived from Krugman (1991), that is, the existence of regional nominal wage gradients and its transformation following changes in trade regimes. Our case study analyzes the effects of the substitution of an open economy by a closed economy regime, exactly the opposite process studied by Hanson (1996, 1997). In Spain, during the interwar period, protectionist policies would have favored the loss of centrality of the coastal location (Barcelona) and the relative rise of central locations (such as Madrid). Our results indicate the existence of a wage gradient centered in Barcelona during the interwar period (1914-1930) and its weakening after 1925.

Imaging the seascapes of the Mediterranean

The Mediterranean Sea is a relative newcomer to Earth"s landscape. Due to its complex tectonic history, this mid-latitude sea is composed of a cluster of basins. Their seascape is in most cases dominated by geologically young structures, but also by sedimentary processes. Among the latter, sedimentary processes related to the dynamics of the largest rivers in the Mediterranean (Ebro, Rhône, Po, Danube, and Nile) stand out. This overview article illustrates the main sedimentary processes and their products contributing to shape the Mediterranean seascape within a source-tosink approach. To highlight this approach, this article mainly focuses on one of the EUROSTRATAFORM project study areas: the northwestern Mediterranean.

Influence of configurational atomic order on the relative stability of bcc and close-packed structures in Cu-based alloys

We present a study of the influence of atomic order on the relative stability of the bcc and the 18R martensitic structures in a Cu2.96Al0.92Be0.12 crystal. Calorimetric measurements have shown that disorder increases the stability of the 18R phase, contrary to what happens in Cu-Zn-Al alloys for which it is the bcc phase that is stabilized by disordering the system. This different behavior has been explained in terms of a model recently reported. We have also proved that the entropy change at the martensitic transition is independent of the state of atomic order of the crystal, as predicted theoretically. Our results suggest that differences in the vibrational spectrum of the crystal due to different states of atomic order must be equal in the bcc and in the close-packed phases.

Generating vortex rings in Bose-Einstein condensates in the line-source approximation

We present a numerical method for generating vortex rings in Bose-Einstein condensates confined in axially symmetric traps. The vortex ring is generated using the line-source approximation for the vorticity, i.e., the curl of the superfluid velocity field is different from zero only on a circumference of a given radius located on a plane perpendicular to the symmetry axis and coaxial with it. The particle density is obtained by solving a modified Gross-Pitaevskii equation that incorporates the effect of the velocity field. We discuss the appearance of density profiles, the vortex core structure, and the vortex nucleation energy, i.e., the energy difference between vortical and ground-state configurations. This is used to present a qualitative description of the vortex dynamics.

Greece and Platonic Love in E. M. Forster's Maurice, or the greatness and limits of Antiquity as a source of inspiration.

The aim of this article is to show how, although the evident idealization of Greece and Platonic love throughout the Victorian-Edwardian England, both also show their limits. In order to make it clear the author refers constantly to the implicit Greek texts such as Plato's Symposium and Phaedrus and perhaps even to Plutarch¿s Eroticus in search of a Classical Tradition which is highly significant in order to understand that England at the beginning of the twentieth century.

The determinants of industrial location in Spain, 1856-1929

Durant el segle XIX, l'economia espanyola va transitar per les primeres etapes de la industrialització. Aquest procés es va donar en paral·lel a la integració del mercat domèstic de béns i factors, en un moment en què les reformes liberals i la construcció de la xarxa ferroviària, entre d'altres, van generar una important caiguda en els costos detransport. Al mateix temps que es donava aquesta progressiva integració del mercat domèstic espanyol, es van produir canvis significatius en la pauta de localització industrial. D'una banda, hi hagué un augment considerable de la concentració espacial de la indústria des de mitjans de segle XIX i fins a la Guerra Civil, i d¿altra, un increment de l'especialització regional. Ara bé, quines van ser les forces que van generar aquests canvis? Des d¿un punt de vista teòric, el model de Heckscher-Ohlin suggereix que la distribució a l'espai de l¿activitat econòmica ve determinada per l'avantatge comparativa dels territoris en funció de la dotació relativa de factors. Al seu torn, els models de Nova Geografia Econòmica (NEG) mostren l'existència d'una relació en forma de campana entre el procés d'integració econòmica i el grau de concentració geogràfica de l'activitat industrial. Aquest article examina empíricament els determinants de la localització industrial a Espanya entre 1856 i 1929, mitjançant l'estimació d¿un model que combina els elements de tipus Heckscher-Ohlin i els factors apuntats des de la NEG, amb l'objectiu de contrastar la força relativa dels arguments vinculats a aquestes dues interpretacions a l'hora de modular la localització de la indústria a Espanya. L'anàlisi dels resultats obtinguts mostra que tant la dotació de factors com els mecanismes de tipus NEG van ser elements determinants que expliquen la distribució geogràfica de la indústria des del segle XIX, tot i que la seva força relativa va anar variant amb el temps.

Integración económica y localización industrial. Cataluña, la fábrica de España: ¿cuándo y por qué?

En este artículo se analizan los determinantes de la localización de la actividad industrial en España durante la segunda mitad del siglo XIX. El objetivo es estudiar la existencia de cambios en los factores explicativos de la localización, con el fin de identificar los efectos de la integración económica sobre la geografía industrial española. Para hacerlo, en primer lugar se analiza la literatura histórica existente. En segundo lugar, se describen las teorías que explican la localización de l'actividad. En tercer lugar, se realiza un análisis empírico de la localización y la concentración de la industria española al siglo XIX. A continuación, se propone un estudio econométrico de los determinantes de la localización industrial en dos cortes temporales, 1856 y 1893. Los resultados son consistentes con las teorías del comercio. Durante el decurso de la segunda mitad del siglo XIX, España paso a ser una economía integrada, la movilidad del trabajo y del capital se vio favorecida y como resultado, las diferencias relativas en las dotaciones de factores perdieron importancia en la explicación de las pautas de especialización industrial. Por el contrario, la integración económica favoreció la significación relativa de las economías de escala o de la proximidad a los mercados como elementos explicativos de la localización de la industria, favoreciendo, de esta manera, la aglomeración de la actividad industrial

Industrial agglomerations and wage gradients: the Spanish economy in the interwar period

This paper gives new evidence on the relationship between integration and industrial agglomeration in the presence of scale economies, by testing directly one of the predictions that can be derived from Krugman (1991), that is, the existence of regional nominal wage gradients and its transformation following changes in trade regimes. Our case study analyzes the effects of the substitution of an open economy by a closed economy regime, exactly the opposite process studied by Hanson (1996, 1997). In Spain, during the interwar period, protectionist policies would have favored the loss of centrality of the coastal location (Barcelona) and the relative rise of central locations (such as Madrid). Our results indicate the existence of a wage gradient centered in Barcelona during the interwar period (1914-1930) and its weakening after 1925.

Were Spanish migrants attracted by industrial agglomerations?: an analysis for the interwar years in the light of the new economic geography

In this paper we examine whether access to markets had a significant influence onmigration choices of Spanish internal migrants in the inter-war years. We perform astructural contrast of a New Economic Geography model that focus on the forwardlinkage that links workers location choice with the geography of industrial production,one of the centripetal forces that drive agglomeration in the NEG models. The resultshighlight the presence of this forward linkage in the Spanish economy of the inter-warperiod. That is, we prove the existence of a direct relation between workers¿ localizationdecisions and the market potential of the host regions. In addition, the direct estimationof the values associated with key parameters in the NEG model allows us to simulatethe migratory flows derived from different scenarios of the relative size of regions andthe distances between them. We show that in Spain the power of attraction of theagglomerations grew as they increased in size, but the high elasticity estimated for themigration costs reduced the intensity of the migratory flows. This could help to explainthe apparently low intensity of internal migrations in Spain until its upsurge during the1920s. This also explains the geography of migrations in Spain during this period,which hardly affected the regions furthest from the large industrial agglomerations (i.e.,regions such as Andalusia, Estremadura and Castile-La Mancha) but had an intenseeffect on the provinces nearest to the principal centres of industrial development.

Industrial agglomerations and wage gradients: the Spanish economy in the interwar period

This paper gives new evidence on the relationship between integration and industrial agglomeration in the presence of scale economies, by testing directly one of the predictions that can be derived from Krugman (1991), that is, the existence of regional nominal wage gradients and its transformation following changes in trade regimes. Our case study analyzes the effects of the substitution of an open economy by a closed economy regime, exactly the opposite process studied by Hanson (1996, 1997). In Spain, during the interwar period, protectionist policies would have favored the loss of centrality of the coastal location (Barcelona) and the relative rise of central locations (such as Madrid). Our results indicate the existence of a wage gradient centered in Barcelona during the interwar period (1914-1930) and its weakening after 1925.

Were Spanish migrants attracted by industrial agglomerations?: an analysis for the interwar years in the light of the new economic geography

In this paper we examine whether access to markets had a significant influence onmigration choices of Spanish internal migrants in the inter-war years. We perform astructural contrast of a New Economic Geography model that focus on the forwardlinkage that links workers location choice with the geography of industrial production,one of the centripetal forces that drive agglomeration in the NEG models. The resultshighlight the presence of this forward linkage in the Spanish economy of the inter-warperiod. That is, we prove the existence of a direct relation between workers¿ localizationdecisions and the market potential of the host regions. In addition, the direct estimationof the values associated with key parameters in the NEG model allows us to simulatethe migratory flows derived from different scenarios of the relative size of regions andthe distances between them. We show that in Spain the power of attraction of theagglomerations grew as they increased in size, but the high elasticity estimated for themigration costs reduced the intensity of the migratory flows. This could help to explainthe apparently low intensity of internal migrations in Spain until its upsurge during the1920s. This also explains the geography of migrations in Spain during this period,which hardly affected the regions furthest from the large industrial agglomerations (i.e.,regions such as Andalusia, Estremadura and Castile-La Mancha) but had an intenseeffect on the provinces nearest to the principal centres of industrial development.

Integración económica y localización industrial. Cataluña, la fábrica de España: ¿cuándo y por qué?

En este artículo se analizan los determinantes de la localización de la actividad industrial en España durante la segunda mitad del siglo XIX. El objetivo es estudiar la existencia de cambios en los factores explicativos de la localización, con el fin de identificar los efectos de la integración económica sobre la geografía industrial española. Para hacerlo, en primer lugar se analiza la literatura histórica existente. En segundo lugar, se describen las teorías que explican la localización de l'actividad. En tercer lugar, se realiza un análisis empírico de la localización y la concentración de la industria española al siglo XIX. A continuación, se propone un estudio econométrico de los determinantes de la localización industrial en dos cortes temporales, 1856 y 1893. Los resultados son consistentes con las teorías del comercio. Durante el decurso de la segunda mitad del siglo XIX, España paso a ser una economía integrada, la movilidad del trabajo y del capital se vio favorecida y como resultado, las diferencias relativas en las dotaciones de factores perdieron importancia en la explicación de las pautas de especialización industrial. Por el contrario, la integración económica favoreció la significación relativa de las economías de escala o de la proximidad a los mercados como elementos explicativos de la localización de la industria, favoreciendo, de esta manera, la aglomeración de la actividad industrial

Seismic detection and characterization of landslides and other mass movements

Seismic methods used in the study of snow avalanches may be employed to detect and characterize landslides and other mass movements, using standard spectrogram/sonogram analysis. For snow avalanches, the spectrogram for a station that is approached by a sliding mass exhibits a triangular time/frequency signature due to an increase over time in the higher-frequency constituents. Recognition of this characteristic footprint in a spectrogram suggests a useful metric for identifying other mass-movement events such as landslides. The 1 June 2005 slide at Laguna Beach, California is examined using data obtained from the Caltech/USGS Regional Seismic Network. This event exhibits the same general spectrogram features observed in studies of Alpine snow avalanches. We propose that these features are due to the systematic relative increase in high-frequency energy transmitted to a seismometer in the path of a mass slide owing to a reduction of distance from the source signal. This phenomenon is related to the path of the waves whose high frequencies are less attenuated as they traverse shorter source-receiver paths. Entrainment of material in the course of the slide may also contribute to the triangular time/frequency signature as a consequence of the increase in the energy involved in the process; in this case the contribution would be a source effect. By applying this commonly observed characteristic to routine monitoring algorithms, along with custom adjustments for local site effects, we seek to contribute to the improvement in automatic detection and monitoring methods of landslides and other mass movements.

GIS-based debris flow source and runout susceptibility assessment from DEM data - a case study in NW Nicaragua

In October 1998, Hurricane Mitch triggered numerous landslides (mainly debris flows) in Honduras and Nicaragua, resulting in a high death toll and in considerable damage to property. The potential application of relatively simple and affordable spatial prediction models for landslide hazard mapping in developing countries was studied. Our attention was focused on a region in NW Nicaragua, one of the most severely hit places during the Mitch event. A landslide map was obtained at 1:10 000 scale in a Geographic Information System (GIS) environment from the interpretation of aerial photographs and detailed field work. In this map the terrain failure zones were distinguished from the areas within the reach of the mobilized materials. A Digital Elevation Model (DEM) with 20 m×20 m of pixel size was also employed in the study area. A comparative analysis of the terrain failures caused by Hurricane Mitch and a selection of 4 terrain factors extracted from the DEM which, contributed to the terrain instability, was carried out. Land propensity to failure was determined with the aid of a bivariate analysis and GIS tools in a terrain failure susceptibility map. In order to estimate the areas that could be affected by the path or deposition of the mobilized materials, we considered the fact that under intense rainfall events debris flows tend to travel long distances following the maximum slope and merging with the drainage network. Using the TauDEM extension for ArcGIS software we generated automatically flow lines following the maximum slope in the DEM starting from the areas prone to failure in the terrain failure susceptibility map. The areas crossed by the flow lines from each terrain failure susceptibility class correspond to the runout susceptibility classes represented in a runout susceptibility map. The study of terrain failure and runout susceptibility enabled us to obtain a spatial prediction for landslides, which could contribute to landslide risk mitigation.