Preliminary integrated magnetostratigraphic and biostratigraphic correlation in the Miocene Lorca Basin (Murcia, SE Spain).

The Lorca basin is one of the Neogene basins OS South Eastern Spain. The infilling Tortonian-Messinian deposits are mainly composed OS marls and reach up to 1,200 m in thickness. A biostratigraphic survey OS these deposits, assisted by the determination OS the magnetic polarity reversal pattern Sor most OS these deposits (900 m), has enabled the Tortonian-Messinian chronostratigraphy to be precised. The close sampling space for biostratigraphic determination has enabled the accurate location OS Sour main biostratigraphic events than can be correlated with charactenstic events of the Mediterranean biostratigraphic Zones. In addition, the location OS the TortonianNessinian boundary has been accurately placed at some 150 m below the main gypsurn unit outcropping in the basin. The integrated bio-magnetostratigraphic data fiom the studied section allows a tentative interpretation OS the identified magnetozones. Thus, a correlation to the Geomagnetic Polarity Time Scale is presented for more than 900 m of pre-evaporite Miocene stratigraphic succession fiom the Lorca basin. Moreover, about 15' OS anticlockwise rotation has been detected. Its significance is evaluated in the basin geodynamic framework.

Landscape Systems and Human Land-Use Interactions in Mediterranean Highlands and Littoral Plains during the Late Holocene: Integrated Analysis from the InterAmbAr Project (North-Eastern Catalonia).

The main goal of the InterAmbAr reseach project is to analyze the relationships between landscape systems and human land-use strategies on mountains and littoral plains from a long-term perspective. The study adopts a high resolution analysis of small-scale study areas located in the Mediterranean region of north-eastern Catalonia. The study areas are distributed along an altitudinal transect from the high mountain (above 2000m a.s.l.) to the littoral plain of Empordà (Fig. 1). High resolution interdisciplinary research has been carried out from 2010, based on the integration of palaeoenvironmental and archaeological data. The micro-scale approach is used to understand human-environmental relationships. It allows better understanding of the local-regional nature of environmental changes and the synergies between catchment-based systems, hydro-sedimentary regimes, human mobility, land-uses, human environments, demography, etc.

Deposition and characterization of lines printed through laser-induced forward transfer

The possibility of printing two-dimensional micropatterns of biomolecule solutions is of great interest in many fields of research in biomedicine, from cell-growth and development studies to the investigation of the mechanisms of communication between cells. Although laser-induced forward transfer (LIFT) has been extensively used to print micrometric droplets of biological solutions, the fabrication of complex patterns depends on the feasibility of the technique to print micron-sized lines of aqueous solutions. In this study we investigate such a possibility through the analysis of the influence of droplet spacing of a water and glycerol solution on the morphology of the features printed by LIFT. We prove that it is indeed possible to print long and uniform continuous lines by controlling the overlap between adjacent droplets. We show how, depending on droplet spacing, several printed morphologies are generated, and we offer, in addition, a simple explanation of the observed behavior based on the jetting dynamics characteristic of the LIFT of liquids.

An integrated model of adoption and development of e-commerce in companies

Since the mid-1990s researchers have sought to understand why some firms embark on e-commerceoperations on the Internet while others prefer to wait and see how events unfold. We still have todetermine which variables contribute to explaining the extent to which firms use e-commerce, giventhat to date the literature has not yet offered conclusive evidence on this question. The current workaims to provide an integrated vision of the set of factors influencing the e-commerce adoptionprocess. We use a sample of 2,038 firms of all types that trade their products either with otherorganizations or with end-consumers.

DAI-DEPUR: an integrated and distributed architecture for wastewater treatment plants supervision

The activated sludge process - the main biological technology usually applied towastewater treatment plants (WWTP) - directly depends on live beings (microorganisms), and therefore on unforeseen changes produced by them. It could be possible to get a good plant operation if the supervisory control system is able to react to the changes and deviations in the system and can take thenecessary actions to restore the system’s performance. These decisions are oftenbased both on physical, chemical, microbiological principles (suitable to bemodelled by conventional control algorithms) and on some knowledge (suitable to be modelled by knowledge-based systems). But one of the key problems in knowledge-based control systems design is the development of an architecture able to manage efficiently the different elements of the process (integrated architecture), to learn from previous cases (spec@c experimental knowledge) and to acquire the domain knowledge (general expert knowledge). These problems increase when the process belongs to an ill-structured domain and is composed of several complex operational units. Therefore, an integrated and distributed AIarchitecture seems to be a good choice. This paper proposes an integrated and distributed supervisory multi-level architecture for the supervision of WWTP, that overcomes some of the main troubles of classical control techniques and those of knowledge-based systems applied to real world systems

Towards integrated operation of membrane bioreactors : effects of aeration on biological and filtration performance

Two experimental studies evaluated the effect of aerobic and membrane aeration changes on sludge properties, biological nutrient removal and filtration processes in a pilot plant membrane bioreactor. The optimal operating conditions were found at an aerobic dissolved oxygen set-point (DO) of 0.5mgO2L-1 and a membrane specific aeration demand (SADm) of 1mh-1, where membrane aeration can be used for nitrification. Under these conditions, a total flow reduction of 42% was achieved (75% energy reduction) without compromising nutrient removal efficiencies, maintaining sludge characteristics and controlled filtration. Below these optimal operating conditions, the nutrient removal efficiency was reduced, increasing 20% for soluble microbial products, 14% for capillarity suction time and reducing a 15% for filterability. Below this DO set-point, fouling increased with a transmembrane pressure 75% higher. SADm below 1mh-1 doubled the values of transmembrane pressure, without recovery after achieving the initial conditions

Improving the oscillating grid method to characterize aquaculture biosolids using a laser beam and image analysis

Quickremovalofbiosolidsinaquaculturefacilities,andspeciallyinrecirculatingaquaculturesystems(RAS),isoneofthemostimportantstepinwastemanagement.Sedimentationdynamicsofbiosolidsinanaquaculturetankwilldeterminetheiraccumulationatthebottomofthetank.

Blackbody emission under laser excitation of silicon nanopowder produced by plasma-enhanced chemical-vapor deposition

Previous results concerning radiative emission under laser irradiation of silicon nanopowder are reinterpreted in terms of thermal emission. A model is developed that considers the particles in the powder as independent, so under vacuum the only dissipation mechanism is thermal radiation. The supralinear dependence observed between the intensity of the emitted radiation and laser power is predicted by the model, as is the exponential quenching when the gas pressure around the sample increases. The analysis allows us to determine the sample temperature. The local heating of the sample has been assessed independently by the position of the transverse optical Raman mode. Finally, it is suggested that the photoluminescence observed in porous silicon and similar materials could, in some cases, be blackbody radiation

Characterization and Control Strategies of an Integrated Chemical-Biological System for the Remediation of Toxic Pollutants in Wastewater: A case of study

In a previous work, a hybrid system consisting of an advanced oxidation process (AOP) named Photo-Fenton (Ph-F) and a fixed bed biological treatment operating as a sequencing batch biofilm reactor (SBBR) was started-up and optimized to treat 200 mg·L-1 of 4-chlorophenol (4-CP) as a model compound. In this work, studies of reactor stability and control as well as microbial population determination by molecular biology techniques were carried out to further characterize and control the biological reactor. Results revealed that the integrated system was flexible and even able to overcome toxic shock loads. Oxygen uptake rate (OUR) in situ was shown to be a valid tool to control the SBBR operation, to detect toxic conditions to the biomass, and to assess the recovery of performance. A microbial characterization by 16S rDNA sequence analysis reveals that the biological population was varied, although about 30% of the bacteria belonged to the Wautersia genus.