Análisis del material epigráfico

Forma part de: "Un conjunt de materials d'època tardo-republicana de la ciutat romana de Pollentia (Alcúdia, Mallorca)"

Un modelo de producción en gruta: el Alfar de Cabrera D'Anoia, Barcelona

La utilización de grutas y cuevas para llevar a cabo actividades productivas fue un hecho habitual en época medieval. Este trabajo pretende analizar un modelo de producción cerámica que se adapta a un espacio físico considerablemente limitado por las características geológicas del entorno. El alfar de Cabrera d¿Anoia constituye un ejemplo paradigmático de dicho modelo e ilustra un proceso de evolución cronológica y de transformación del entorno para satisfacer las necesidades de la producción cerámica.

Adaptacion al medio y transformacion artesanal: balance actual de las investigaciones acerca del alfar medieval de Cabrera d'Anoia

Las investigaciones sobre Cabrera d"Anoia (Barcelona) han avanzado de forma considerable en los últimos años. La caracterización de los materiales y el estudio de la documentación arqueológica han logrado definir un particular sistema de producción de cerámica que se desarrolla en un marco rupestre de dimensiones limitadas. Una situación que obliga a la modificación continua del área de trabajo en beneficio de las actividades productivas. Este artículo analiza ese proceso de adaptación y transformación permanente del espacio artesanal a partir de los datos proporcionados por el yacimiento. Se trata, en consecuencia, de esbozar un primer balance de los resultados más recientes tras 20 años de investigación sobre este alfar.

Production of nanometric particles in radio frequency glow discharges in mixtures of silane and methane

The formation of silicon particles in rf glow discharges has attracted attention due to their effect as a contaminant during film deposition or etching. However, silicon and silicon alloy powders produced by plasma¿enhanced chemical vapor deposition (PECVD) are promising new materials for sintering ceramics, for making nanoscale filters, or for supporting catalytic surfaces. Common characteristics of these powders are their high purity and the easy control of their stoichiometry through the composition of the precursor gas mixture. Plasma parameters also influence their structure. Nanometric powders of silicon¿carbon alloys exhibiting microstructural properties such as large hydrogen content and high surface/volume ratio have been produced in a PECVD reactor using mixtures of silane and methane at low pressure (-1 Torr) and low frequency square¿wave modulated rf power (13.56 MHz). The a¿Si1¿xCx:H powders were obtained from different precursor gas mixtures, from R=0.05 to R=9, where R=[SiH4]/([SiH4]+[CH4]). The structure of the a¿Si1¿xCx:H powder was analyzed by several techniques. The particles appeared agglomerated, with a wide size distribution between 5 and 100 nm. The silane/methane gas mixture determined the vibrational features of these powders in the infrared. Silicon-hydrogen groups were present for every gas composition, whereas carbon¿hydrogen and silicon¿carbon bonds appeared in methane¿rich mixtures (R-0.6). The thermal desorption of hydrogen revealed two main evolutions at about 375 and 660¿°C that were ascribed to hydrogen bonded to silicon and carbon, respectively. The estimated hydrogen atom concentration in the sample was about 50%.

Playas fósiles sumergidas en la Costa Brava Meridional (Girona)

This paper describes petrologic and morphologic characteristics of fossil beaches submerged in the sector of the Costa Brava located between the Pals Beach and Blanes (Girona). These submerged beaches are composed of large-grain sandstone andconglomerate platforms, situated at a depth between 0.5 and 2.5 meters. These platforms are slightly inclinated towards the open sea. These deposits have been formed very recently, and date from Holocene, as noted by the presence of fragments of roman ceramics inside sandstone

Archaeological and archaeomagnetic dating at a site from the ager Tarraconensis (Tarragona, Spain): El Vila-sec Roman pottery

A very accurate archaeological dating of a Roman site in NE Spain (El Vila-sec) was made based on the typology of pottery artifacts. Three different phases were identifi ed with activity ranging from the mid- 1st century BC to the early-3rd century AD. Analyses of bricks from kilns at El Vila-sec produced data on their stored archaeomagnetic vector. These data were compared with the secular variation curve for the Iberian Peninsula and the SCHA.DIF.3K regional archaeomagnetic model. Both, the reference curve and the model, produced probability distributions for the final period of use for two kilns from the second archaeological phase that were not used during the third phase. At a 95% con fidence level, both time distributions cover a wide chronological range including the presumed archaeological age. Both the Iberian secular variation curve and the SCHA.DIF.3K regional model proved to be suitable models for dating the site, although on their own they do not produce a single unambiguous solution. This archaeomagnetic approach could also be applied to neighbouring archaeological sites that have an imprecise archaeological age.

Composition, nanostructure, and optical properties of silver and silver-copper lusters

Lusters are composite thin layers of coinage metal nanoparticles in glass displaying peculiar optical properties and obtained by a process involving ionic exchange, diffusion, and crystallization. In particular, the origin of the high reflectance (golden-shine) shown by those layers has been subject of some discussion. It has been attributed to either the presence of larger particles, thinner multiple layers or higher volume fraction of nanoparticles. The object of this paper is to clarify this for which a set of laboratory designed lusters are analysed by Rutherford backscattering spectroscopy, transmission electron microscopy, x-ray diffraction, and ultraviolet-visible spectroscopy. Model calculations and numerical simulations using the finite difference time domain method were also performed to evaluate the optical properties. Finally, the correlation between synthesis conditions, nanostructure, and optical properties is obtained for these materials.

The use of micro-XRD for the study of glaze color decorations

The compounds responsible for the colours and decorations in glass and glazed ceramics include: colouring agents (transition metal ions), pigments (micro-and nano-precipitates of compounds that either do not dissolve or recrystallize in the glassy matrix) and opacifiers (microcrystalline compounds with high light scattering capability). Their composition, structure and range of stability are highly dependent not only on the composition but also on the procedures followed to obtain them. Chemical composition of the colorants and crystallites may be obtained by means of SEM-EDX and WDX. Synchrotron Radiation micro-X-ray Diffraction has a small beam size adequate (10 to 50 microns footprint size) to obtain the structural information of crystalline compounds and high brilliance, optimal for determining the crystallites even when present in low amounts. In addition, in glass decorations the crystallites often appear forming thin layers (from 10 to 100 micrometers thick) and they show a depth dependent composition and crystal structure. Their nature and distribution across the glass/glazes decorations gives direct information on the technology of production and stability and may be related to the color and appearance. A selection of glass and glaze coloring agents and decorations are studied by means of SR-micro- XRD and SEM-EDX including: manganese brown, antimony yellow, red copper lusters and cobalt blue. The selection includes Medieval (Islamic, and Hispano Moresque) and renaissance tin glazed ceramics from the 10th to the 17th century AD.

Les Imitacions de vaixella fina importada a la Hispania Citerior (segles I aC-I dC)

Aquesta obra és fruit de la taula rodona «Imitatio Vasaria. Les imitacions de vaixella fina a la Hispània Citerior en època tardorepublicana i altimperial: producció i comercialització», que va reunir durant tres dies representants de tretze grups de recerca per reflexionar sobre les imitacions de les ceràmiques fines d’importació d’època romana tardorepublicana i altimperial. Com a resultat d’aquestes xerrades es van redactar 14 articles que presenten els estats de la qüestió que cada grup de recerca va portar a terme en el seu àmbit geogràfic i en els jaciments on van desenvolupar el seu treball de camp: diverses zones de la Hispània Citerior des de les universitats de Girona, Barcelona, Autònoma de Barcelona, València, Alacant i Valladolid, així com des dels Museus d’Arqueologia de Catalunya-Empúries, Mataró i Badalona, i de l’ICAC. Dos articles del llibre, però, se centren en un altre punt de la Mediterrània occidental, el Llenguadoc, aportat per un grup del Centre National de la Recherche Scientifique (CNRS).

L'ocupació altimperial del solar del mercat de Santa Caterina. Un possible centre productor ceràmic

En aquest article es presenta la fase de la intervenció realitzada al mercat de Santa Caterina que es desenvolupa en l’època altimperial romana i està relacionada amb els inicis de la ciutat de Barcino. En funció de les estructures recuperades i la gran quantitat de material d’escòries ceràmiques recollides, les restes documentades s’han identificat amb una zona de producció ceràmica suburbial, on podrien produir-se tant ceràmiques comunes com recipients amfòrics. Aquests últims són els que han aportat més informació, tant per la quantitat com per la diversitat de marques recollides, que han permès ampliar el coneixement sobre les possibles produccions a la ciutat i els circuits del vi a la zona.