Diet-related buccal dental microwear patterns in central african pygmy foragers and bantu-speaking farmer and pastoralist populations.

Pygmy hunter-gatherers from Central Africa have shared a network of socioeconomic interactions with non-Pygmy Bantu speakers since agropastoral lifestyle spread across sub-Saharan Africa. Ethnographic studies have reported that their diets differ in consumption of both animal proteins and starch grains. Hunted meat and gathered plant foods, especially underground storage organs (USOs), are dietary staples for pygmies. However, scarce information exists about forager-farmer interaction and the agricultural products used by pygmies. Since the effects of dietary preferences on teeth in modern and past pygmies remain unknown, we explored dietary history through quantitative analysis of buccal microwear on cheek teeth in well-documented Baka pygmies. We then determined if microwear patterns differ among other Pygmy groups (Aka, Mbuti, and Babongo) and between Bantu-speaking farmer and pastoralist populations from past centuries. The buccal dental microwear patterns of Pygmy hunter-gatherers and non-Pygmy Bantu pastoralists show lower scratch densities, indicative of diets more intensively based on nonabrasive foodstuffs, compared with Bantu farmers, who consume larger amounts of grit from stoneground foods. The Baka pygmies showed microwear patterns similar to those of ancient Aka and Mbuti, suggesting that the mechanical properties of their preferred diets have not significantly changed through time. In contrast, Babongo pygmies showed scratch densities and lengths similar to those of the farmers, consistent with sociocultural contacts and genetic factors. Our findings support that buccal microwear patterns predict dietary habits independent of ecological conditions and reflect the abrasive properties of preferred or fallback foods such as USOs, which may have contributed to the dietary specializations of ancient human populations.

Evaluation of the indication for surgical extraction of third molars according to the oral surgeon and the primary care dentist. Experience in the Master of Oral Surgery and Implantology at Barcelona University Dental School

Introduction: Third molar extraction is the most frequent procedure in oral surgery. The present study evaluates the indication of third molar extraction as established by the primary care dentist (PCD) and the oral surgeon, and compares the justification for extraction with the principal reason for patient consultation. Patients and method: A descriptive study was made of 319 patients subjected to surgical removal of a third molar in the context of the Master of Oral Surgery and Implantology (Barcelona University Dental School, Barcelona, Spain) between July 2004 and March 2005. The following parameters were evaluated: sex, age, molar, type of impaction, position according to the classifications of Pell and Gregory and of Winter, and the reasons justifying extraction. Results: The lower third molars were the most commonly extracted molars (73.7%). A total of 69.6% of the teeth were covered by soft tissues only. Fifty-six percent of the lower molars corresponded to Pell and Gregory Class IIB, while 42.1% were in the vertical position. The most common reason for patient reference to our Service of Oral Surgery on the part of the PCD was prophylactic removal (51.0% versus 46.1% in the case of the oral surgeon). Discussion and conclusions. Our results show prophylaxis to be the principal indication of third molar extraction, followed by orthodontic reasons. Regarding third molars with associated clinical symptoms or signs, infectious disease-including pericoronitis- was the pathology most often observed by the oral surgeon, followed by caries. This order of frequency was seen to invert in the case of third molars referred for extraction by the PCD. A vertical position predominated among the third molars with associated pathology

Endosseous dental implant fractures an analysis of 21 cases

Implant fracture is an infrequent cause of implant failure. The present study evaluates 21 fractured implants, with an analysis of patient age and sex, the type, length and diameter of the implant, positioning in the dental arch, the type of prosthetic rehabilitation involved, the number of abutments and pontics, the presence or absence of distal extensions or cantilevers, and loading time to fracture. Implant fracture was more common in males than in females (15:4), and the mean patient age was 56.9 years. Most cases (n = 19) corresponded to implant-supported fixed prostheses - 16 with cantilevers of different lengths- while only two fractured implants were supporting overdentures instead of fixed prostheses. The great majority of fractured implants (80.9%) were located in the molar and premolar regions, and most fractured within 3-4 years after loading. It is important to know and apply the measures required to prevent implant fracture, and to seek the best individualized solution for each case - though complete implant removal is usually the treatment of choice

Bacterial adhesion efficiency on implant abutments: a comparative study

The attachment of Escherichia coli ATCC 25922 and Staphylococcus aureus ATCC 28213 onto six different materials used to manufacture dental implant abutments was quantitatively determined after 2 and 24 h of contact between the materials and the bacterial cultures. The materials were topographically characterized and their wettability determined, with both parameters subsequently related to bacterial adhesion. Atomic force microscopy, interferometry, and contact angle measurement were used to characterize the materials" surfaces. The results showed that neither roughness nor nano-roughness greatly influenced bacterial attachment whereas wettability strongly correlated with adhesion. After 2 h the degree of E. coli attachment markedly differed depending on the material whereas similar differences were not observed for S. aureus, which yielded consistently higher counts of adhered cells. Nevertheless, after 24 h the adhesion of the two species to the different test materials no longer significantly differed, although on all surfaces the numbers of finally adhered E. coli were higher than those of S. aureus

Diagonal ear lobe crease and atherosclerosis: a review of the medical literature and dental implications

In Spain a significant number of individuals die from atherosclerotic disease of the coronary and carotid arteries without having classic risk factors and prodromal symptoms. The diagonal ear lobe crease (DELC) has been characterized in the medical literature as a surrogate marker which can identify high risk patients having occult atherosclerosis. This topic however has not been examined in either the medical or dental literature emanating from Spain. The majority of clinical, angiography and postmortem reports support the premise that DELC is a valuable extravascular physical sign able to distinguish some patients at risk of succumbing to atherosclerosis of the coronary arteries. A minority of studies have however failed to support this hypothesis. More recently reports using B mode ultrasound have also linked DELC to atherosclerosis of the carotid artery and another report has related DELC to the presence of calcified carotid artery atheromas on panoramic radiographs. DELC is readily visible during head and neck cancer screening examinations. In conjunction with the patient"s medical history, vital signs, and panoramic radiograph, the DELC may assist in atherosclerotic risk assessment

El taller ceràmic d'època romana del carrer Princesa de Barcelona. Estudi arqueològic de les restes i estudi arqueomètric del material ceràmic

Les excavacions arqueològiques recents realitzades al carrer Princesa 21 de Barcelona han tret a la llum noves evidències de la producció de ceràmica romana a l"àrea perifèrica de Barcino. Aquest taller ceràmic presenta dues fases cronològiques, des del començament del segle I dC fins al II dC, i va produir àmfores Pascual 1 i Dressel 2-4, ceràmica comuna, tegulae i pondii. L"origen d"aquest taller està relacionat amb la fundació de la colònia romana de Barcino i la imposició de les estructures econòmiques i socials romanes. Fins avui, s"han caracteritzat 42 fragments d"àmfores Pascual 1, 2 pondii i 4 mostres d"argila mitjançant la tècnica de Fluorescència de Raigs X (FRX) en l"estudi de procedència, i les composicions mineralògiques s"han determinat mitjançant anàlisis per Difracció de Raigs X (DRX) per entendre"n les característiques tecnològiques. Aquestes anàlisis demostren una producció amfòrica homogènia i estandarditzada, realitzada amb una pasta calcària normalment cuita a alta temperatura.

Material educativo en la diabetes gestacional

Este artículo presenta el material didáctico elaborado para facilitar la tarea educativa en las mujeres diagnosticadas de diabetes gestacional.

Material educativo en la diabetes gestacional

Este artículo presenta el material didáctico elaborado para facilitar la tarea educativa en las mujeres diagnosticadas de diabetes gestacional.

Computer-aided system for morphometric mandibular index computation (Using dental panoramic radiographs)

Objective: We propose and validate a computer aided system to measure three different mandibular indexes: cortical width, panoramic mandibular index and, mandibular alveolar bone resorption index. Study Design: Repeatability and reproducibility of the measurements are analyzed and compared to the manual estimation of the same indexes. Results: The proposed computerized system exhibits superior repeatability and reproducibility rates compared to standard manual methods. Moreover, the time required to perform the measurements using the proposed method is negligible compared to perform the measurements manually. Conclusions: We have proposed a very user friendly computerized method to measure three different morphometric mandibular indexes. From the results we can conclude that the system provides a practical manner to perform these measurements. It does not require an expert examiner and does not take more than 16 seconds per analysis. Thus, it may be suitable to diagnose osteoporosis using dental panoramic radiographs

Buccal dental microwear and stable isotopes of El Collado: A mesolithic site from Spain,

This study examines the correlation between buccal dental microwear and stable isotopes. The buccal surface of post-canine teeth casts from El Collado, the largest Mesolithic site in Spain, were examined under Scanning Electron Microscope; photomicrographs were taken from the middle third of the buccal surface with magnification 100X. Only six individuals passed the criteria for buccal dental microwear analysis. The photomicrographs were treated by adobe Photoshop 8.01 to cover an area 0.56 mm² of middle third of buccal surface, the output photomicrographs were digitized using Sigmascan Pro 5 by SPSS. Then the correlation between buccal microwear pattern and stable isotopes of the same individuals, of the previous study of Guixe et al., 2006, was examined using a Pearson test. Statistical analysis revealed that there is no significant correlation between stable isotopes and buccal dental microwear of the people of the Mesolithic site of El Collado. The historical and archaeological documentation suggest that the Mesolithic people tended to consume marine food. Fish-drying techniques were used during the Mesolithic period which allowed the introduction of dust and sand to the fish. These abrasive particles affected the buccal dental microwear pattern, so that no correlation between the isotopes and microwear may be expected. This also suggests that the buccal dental microwear pattern exceeds dietary reconstruction to reconstruct food processing techniques.

Prevalence of smoking among dentists in Catalonia - Spain (2006). Literature review of smoking cessation practices in the dental office

Objective: The objective of this study was to collect data on the prevalence of smokers among Catalonian dentists (by age and sex) and compare them with existing data on the general population, doctors, registered nurses and pharmacists. The overall prevalence of smokers in Catalonia (2006) was 34.5% of men and 24.3% of women. Data available on the prevalence of smoking among doctors (26.3% men and 22.1% women), pharmacists (19.8% men and 20.6% women) and registered nurses (34.1% men and 35.3% women) relates to the year 2002. Study design: In September 2006, Catalonian dentists (n=3,799) were asked about their habits in relation to tobacco in a self-administered questionnaire, on use and opinions with respect to dental amalgam. Five hundred and seventynine questionnaires were received, of which 538 answered the question on smoking (14.2% of the sample universe). Results: The prevalence of smokers among dentists is lower (24.9% of men and 18.4% of women) than in the general population and other healthcare professionals. In dentists in the age group between 25 and 34 years, the prevalence was 26.1% in men and 14.9% in women, while the prevalence in this age group in the general population was 43.6% and 37.1%, respectively. Conclusion: Catalonian dentists have a much lower prevalence of tobacco use than the general population and lower even than other healthcare professionals. Given that non-smoking healthcare professionals have better awareness for providing recommendations for smoking prevention and cessation, Catalonian dentists may be a valid group for performing this task for which there is scientific evidence.

A prospective, randomized, triple-blind comparison of articaine and bupivacaine for maxillary infiltrations

Objectives: To compare the clinical anesthetic efficacy of 0.5% bupivacaine and 4% articaine (both with 1:200.000 adrenaline) for anterior maxillary infiltration in healthy volunteers. Material and methods: A triple-blind split-mouth randomized clinical trial was carried out in 20 volunteers. A supraperiosteal buccal injection of 0.9 ml of either solution at the apex of the lateral incisor was done in 2 appointments separated 2 weeks apart. The following outcome variables were measured: latency time, anesthetic efficacy (dental pulp, keratinized gingiva, alveolar mucosa and upper lip mucosa and tissue) and the duration of anesthetic effect. Hemodynamic parameters were monitored during the procedure. Results: Latency time recorded was similar for both anesthetic solutions (p>0.05). No statistically significant differences were found in terms of anesthetic efficacy for dental pulp, keratinized gingiva or alveolar mucosa. Articaine had a significant higher proportion of successful anesthesia at 10 minutes after infiltration in lip mucosa and lip skin (p=0.039). The duration of anesthesia was 336 minutes for bupivacaine and 167 minutes for articaine. (p<0.001). No significant hemodynamic alterations were noted during the procedure. Conclusions: Articaine and bupivacaine exhibited similar anesthetic efficacy for maxillary infiltrations. The duration of anesthesia was longer with the bupivacaine solution, but lip anesthesia was better with articaine

Disseny de les llantes en material compòsit de les rodes davanteres i roda posterior del vehicle de baix consum "Àguila"

Durant els últims dos anys un grup d’estudiants de l’Escola Politècnica Superior de laUniversitat de Girona han construït i evolucionat un prototip per competir en la Shell EcoMarathon, una cursa de caràcter internacional que es celebra cada any a Nogaro (França) ia on l’objectiu primordial és aconseguir el mínim consum. Equips de diferents països delmón recorren amb els seus prototips la mateixa distància i el guanyador és qui en finalitzarhagi fet servir menys quantitat de combustible. La intenció de l’equip és continuar competint en aquest cursa durant els propers anys, peraquest motiu cada any es plantegen noves modificacions a realitzar per tal d’aconseguir unprototip més competitiu. Una de les modificacions consisteix en substituir les actuals llantesd’alumini equipades en el vehicle per unes llantes lenticulars fabricades en fibra de carboni.Aquestes llantes en material compòsit representen una millora en prestacions respecte lesllantes convencionals en reduir la inèrcia.Escollir la fibra de carboni com el material a emprar no ha estat a l’atzar. Els avantatges quecomporta la fibra de carboni en referència als rati rigidesa/pes i resistència/pes sónindiscutibles. La resistència a la fatiga d’aquest tipus de material és més elevada que la del’alumini, material utilitzat en les actuals llantes, a més, la voluntat d’entendre millor elcomportament i els processos de fabricació d’aquest material per part dels membres del’equip posicionen a la fibra de carboni com el material més idoni.La solució final adoptada pel disseny de les llantes consta per la unió adhesiva de duespeces iguals fabricades en fibra de carboni. La facilitat de poder fabricar dos “plats” simètricsresulta el punt fort d’aquest disseny, el qual, amb un únic motllo s’arriben a construir latotalitat de les llantes

Cultura material i formes de vida a la Barcelona de mitjan segle XVII (1655-1660) : Les llars de taverners i hostalers a través dels inventaris dels seus béns

L'estudi dels inventaris postmortem ens ha permès apropar-nos a la quotidianitat de taverners i hostalers que visqueren durant el segle XVII a la ciutat de Barcelona. Aquest tipus de document notarial ens deixa, entre d'altres, testimoni de la cultura material; els objectes, estris, mobles, robes... que ens poden ajudar a entendre diferents usos i costums, així com altres aspectes relacionats amb les mentalitats.

Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material

The main goal of this paper is to obtain a granular material formulated with Municipal Solid Waste Incinerarion (MSWI) bottom ash (BA) and air pollution control (APC) ash to be used as secondary building material. Previously, an optimum concrete mixture using both MSWI residues as aggregates was formulated. A compromise between the environmental behaviour and the economy of the process was considered. Unconfined compressive strength and abrasion resistance values were measured in order to evaluate the mechanical properties. From these results, the granular mixture was not suited for certain applications owing to the high BA/APC content and low cement percentages used to reduce the costs of the final product. Nevertheless, the leaching test performed showed that the concentrations of all heavy metals were below the limits established by the current Catalan legislation for their reutilization. Therefore, the material studied might be mainly used in embankments, where high mechanical properties are not needed and environmental safety is assured.