183 resultados para ECONOMÍA INDUSTRIAL
Resumo:
This paper presents a novel efficiencybased evaluation of sentence and word aligners. This assessment is critical in order to make a reliable use in industrial scenarios. The evaluation shows that the resourcesrequired by aligners differ rather broadly. Subsequently, we establish limitation mechanisms on a set of aligners deployed as web services. These results, paired with the quality expected from the aligners, allow providers to choose the most appropriate aligner according to the task at hand.
Resumo:
In this article we analyze the reasons, within the context of Spanish industrial relations, for trade union members’ active participation in their regional union. The case of Spain is particularly interesting as the unions’ main activity, collective bargaining, is a public good. The text, based on research involving a representative survey of members of a regional branch of the “Workers” Commissions” (Comisiones Obreras) trade union, provides empirical evidence that the union presence in the workplace has a significant influence on members’ propensity for activism. By contrast, the alternative hypothesis based on instrumental reasons appears of little relevance in the Spanish industrial relations context.
Resumo:
Este trabajo parte de la hipótesis de que el intervalo es un concepto clave para analizar de qué modo algunos artistas contemporáneos están interviniendo en las formas cinematográficas. Para ello, se propone un análisis comparativo de tres retratos fílmicos recientes que representan distintas formas de trabajo: el industrial (Sharon Lockhart), el intelectual (Rodney Graham) y el artístico (Manon de Boer). De este modo, esta investigación se centra en la relación entre la representación del trabajo, el trabajo de representación y el trabajo de interpretación del espectador. La propuesta de este estudio, al fin, es que mientras la teoría soviética del intervalo implica un movimiento hacia una resolución, estas intervenciones contemporáneas en el espacio del intervalo inducen, por el contrario, una fisura o un espacio de no-resolución que cuestiona la economía del tiempo propia de una sociedad post-fordista, en la que el tiempo del consumo y de la producción parecen haber invadido todas las esferas de la vida.
Resumo:
El presente trabajo se centra en la ampliación de un vocabulario de economía facilitado por la base de datos terminológicos del Gobierno del Canadá (Termium). Tuvo como objetivo principal completar 30 de las 300 fichas que nos facilitaron con equivalentes en inglés y en francés para los que se debía proporcionar su respectivo(s) equivalente(s) en español.
Resumo:
La industria del automóvil es un sector vital para la economía mundial y dentro de la actividad industrial en general, ya que, a su vez, influye en otros sectores industriales: sectores de bienes de equipo, tecnologías de la información, plásticos, caucho, entre muchos otros. Por este y otros motivos que expondremos más adelante hemos decidido encaminar este trabajo hacia un análisis exhaustivo de ese sector, a partir de su evolución histórica y su situación actual. Cabe decir que nuestro trabajo se centra exclusivamente en el ámbito español ya que, en otro caso, nuestro análisis hubiese sido muy generalizado y no hubiésemos podido profundizar más en el tema estudiado
Resumo:
This paper presents new estimates of total factor productivity growth in Britain for the period 1770-1860. We use a dual technique recently popularized by Hsieh (1999), and argue that the estimates we derive from factor prices are of similar quality to quantity-based calculations. Our results provide further evidence, derived from this independent set of sources, that productivity growth during the British Industrial Revolution was relatively slow. During the years 1770-1800, TFP growth was close to zero, according to our estimates. The period 1800-1830 experienced an acceleration of productivity growth. The Crafts-Harley view of the Industrial Revolution is thus reinforced. We also consider alternative explanations of slow productivity growth, and reject the interpretation that focuses on the introduction of steam as a general purpose technology.
Resumo:
La política monetaria llevada a cabo por parte de la Reserva Federaly el Bundesbank durante los últimos años puede caracterizarse con bastante precisión mediante una regla de tipo de interés como la propuesta por Taylor (1994). La forma que toma la regla de Taylor es similar a la de la regla óptima de política monetaria que se obtiene como solución del problema de un banco central preocupado por estabilizar la inflación y el producto, en el contexto de un modelo keynesiano convencional. Esta propiedad, junto con el éxito notable de las autoridades monetarias alemanas y norteamericanas en el mantenimiento sostenido de un nivel de inflación bajo y estable, justifican el uso de la regla de Taylor como una primera aproximación al comportamiento esperado y deseable por parte del banco central de un país industrializado y, por lo tanto, a la futura política monetaria del BCE.Teniendo tal consideración como punto de partida, se ha llevado a cabo una evaluación de las posibles repercusiones de la integración en la UME sobre la economía española. Dicha evaluación se ha basado en tres ejercicios complementarios: (a) el análisis de la experiencia española a partir de la entrada en el SME, (b) el comportamiento de un índicede tensión monetaria que refleja las discrepancias entre el tipo de interés generado por la regla de Taylor para la Unión Europea y para España, y (c) la simulación de un modelo estructural.Por lo general, los resultados de dichos ejercicios sugieren que los costes para la economía española de renunciar a una política monetaria propia deberían ser muy limitados, por lo menos en la medida en que (a) el BCE siga una política monetaria consistente con la regla de Taylor, y (b) el grado de sincronización del ciclo económico y la inflación española con sus homólogos europeos sea parecido al observado en el pasado reciente. Cabe esperar que los costes de la integración monetaria tomen la forma de una mayor volatilidad del producto y de la inflación, resultante de una mayor persistencia en los efectos de los shocks de oferta y demanda domésticos. Estos costes deberían contrastarse con las ventajas de pertenecer a la unión monetaria europea que son independientes del grado de estabilidad macroeconómica (baja inflación, aumento de la competencia, contribución a la integración política, etc....).Dicha conclusión podría modificarse si se produjese en un futuro una disminución significativa en el grado de correlación entre shocks domésticos (a nivel de España) y shocks agregados (a nivel de la UME), aunque no hay motivo para anticipar un cambio en tal sentido. En cualquier caso, el presente trabajo sugiere un simple indicador (el índice de tensión monetaria desarrollado en la Sección 5), que nos permitirá cuantificar la medida en que la política monetaria del BCE se ajusta a las necesidades e intereses de la economía española.
Resumo:
Crowding-out during the British Industrial Revolution has long been one of the leadingexplanations for slow growth during the Industrial Revolution, but little empirical evidence exists to support it. We argue that examinations of interest rates are fundamentally misguided, and that the eighteenth- and early nineteenth-century private loan market balanced through quantity rationing. Using a unique set of observations on lending volume at a London goldsmith bank, Hoare s, we document the impact of wartime financing on private credit markets. We conclude that there is considerable evidence that government borrowing, especially during wartime, crowded out private credit.
Resumo:
This paper presents new estimates of total factor productivity growth in Britain for the period1770 1860. We use the dual technique and argue that the estimates we derive from factorprices are of similar quality to quantity-based calculations. Our results provide further evidence,calculated on the basis of an independent set of sources, that productivity growth duringthe British Industrial Revolution was relatively slow. The Crafts Harley view of theIndustrial Revolution is thus reinforced. Our preferred estimates suggest a modest accelerationafter 1800.
Resumo:
Why was England first? And why Europe? We present a probabilistic model that builds on big-push models by Murphy, Shleifer and Vishny (1989), combined with hierarchical preferences. The interaction of exogenous demographic factors (in particular the English low-pressure variant of the European marriage pattern)and redistributive institutions such as the old Poor Law combined to make an Industrial Revolution more likely. Essentially, industrialization is the result of having a critical mass of consumers that is rich enough to afford (potentially) mass-produced goods. Our model is then calibrated to match the main characteristics of the English economy in 1750 and the observed transition until 1850.This allows us to address explicitly one of the key features of the British IndustrialRevolution unearthed by economic historians over the last three decades the slowness of productivity and output change. In our calibration, we find that the probability of Britain industrializing is 5 times larger than France s. Contrary to the recent argument by Pomeranz, China in the 18th century had essentially no chance to industrialize at all. This difference is decomposed into a demographic and a policy component, with the former being far more important than the latter.
Resumo:
The mercantile company was the basic form of enterprise in pre-industrial Catalonia. The aim of this paper is to study the formation and development of the mercantile companies in Barcelona whose end was the wholesale and retail sale of textiles in the botigues de teles (textile retail shops) throughout the eighteenth century. These firms were officially registered before a notary and their deeds reveal how these establishments were administered and managed.The study covers a sample of 121 mercantile companies, and the articles and documentation that were put into effect by 32 notaries who were active in Barcelona in the 18th century have been consulted in their entirety. From an initial selection of documentation, a total of 228 deeds registering companies have been found, 107 of which (47%) relate to the creation of companies whose various activities were centred in taverns, textile manufacturing, braiding.... While the 121 companies, which make up our sample and which account for 53% of the deeds registered with the notaries mentioned above, focused exclusively on the management of textile retail shops located in the commercial heart of the city. Thus one point of interest that the documentation reveals is that the majority of the mercantile companies registered by Barcelona notaries throughout the 18th century were establishments which traded in textiles. The first part of the article focuses on the structural characteristics of these enterprises, the number and socio-professional status of the partners and the extent of each partner s involvement in the administration and management. The second part of the article examines the capital investment made by each partner, their rights and obligations agreed on, the sharing out of profits and possible losses and the duration of the companies. The final aim of the paper is to highlight the evolution of these companies through one specific case.
Resumo:
The Industrial Revolution was characterized by technologicalprogress and an increasing capital intensity. Why did real wages stagnateor fall in the beginning? I answer this question by modeling the IndustrialRevolution as the introduction of a relatively more capital intensiveproduction method in a standard neoclassical framework. I show that{\sl real wages fall in the beginning of an industrial revolution if andonly if technological progress in the relatively more capital intensivesector is relatively fast.}
Resumo:
Treball de recerca realitzat per alumnes d’ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l’any 2010. L’objectiu del treball ha consistit a desenvolupar un programa informàtic per controlar les fases d'un procés de rentat industrial.