Adsorption kinetics in the presence of external fields

In this article we present a detailed analysis of the kinetics of a class of sequential adsorption models that take into account the effect of externally applied fields (as an electric field, or a shear rate) on the adsorption. The excluded volume interactions related to the finite size of the adsorbing particles are modified by the external fields. As a result, new adsorption mechanisms appear with respect to the ones used to describe the kinetics in a quiescent fluid. In particular, if the adsorbing particles are allowed to roll over preadsorbed ones, adsorption becomes non local even in the simplest geometry. An exact analytic theory cannot be developed, but we introduce a self-consistent theory that turns out to agree with the simulation results over all the range of the parameters.

Adsorption kinetics in the presence of external fields

In this article we present a detailed analysis of the kinetics of a class of sequential adsorption models that take into account the effect of externally applied fields (as an electric field, or a shear rate) on the adsorption. The excluded volume interactions related to the finite size of the adsorbing particles are modified by the external fields. As a result, new adsorption mechanisms appear with respect to the ones used to describe the kinetics in a quiescent fluid. In particular, if the adsorbing particles are allowed to roll over preadsorbed ones, adsorption becomes non local even in the simplest geometry. An exact analytic theory cannot be developed, but we introduce a self-consistent theory that turns out to agree with the simulation results over all the range of the parameters.

Exact long-time behavior of a network of oscillators under random fields

We present an exact solution for the order parameters that characterize the stationary behavior of a population of Kuramotos phase oscillators under random external fields [Y. Kuramoto, in International Symposium on Mathematical Problems in Theoretical Physics, Lecture Notes in Physics, Vol. 39 (Springer, Berlin, 1975), p. 420]. From these results it is possible to generate the phase diagram of models with an arbitrary distribution of random frequencies and random fields.

Non independent continuous-time random walks

The usual development of the continuous-time random walk (CTRW) assumes that jumps and time intervals are a two-dimensional set of independent and identically distributed random variables. In this paper, we address the theoretical setting of nonindependent CTRWs where consecutive jumps and/or time intervals are correlated. An exact solution to the problem is obtained for the special but relevant case in which the correlation solely depends on the signs of consecutive jumps. Even in this simple case, some interesting features arise, such as transitions from unimodal to bimodal distributions due to correlation. We also develop the necessary analytical techniques and approximations to handle more general situations that can appear in practice.

Parrondo-like behavior in continuous-time random walks with memory

The continuous-time random walk (CTRW) formalism can be adapted to encompass stochastic processes with memory. In this paper we will show how the random combination of two different unbiased CTRWs can give rise to a process with clear drift, if one of them is a CTRW with memory. If one identifies the other one as noise, the effect can be thought of as a kind of stochastic resonance. The ultimate origin of this phenomenon is the same as that of the Parrondo paradox in game theory.

Meissner effect and critical fields in an inhomogeneous Ba2HoCu3O7-x high-Tc superconductor

The Meissner and diamagnetic shielding effects and the upper, lower, and thermodynamical critical fields have been studied in a Ba2HoCu3O7-x sample using magnetization measurements in fields up to 55 kOe. The diamagnetic shielding curve shows the existence of a transition at Tc=91.5 K followed by a broad transition extending from 85 to 25 K which may be related to inhomogeneities in the oxygen content of the sample. A rather low flux expulsion (13.5%) is observed which we attribute to flux pinning or trapping. We show that the coexistence of superconducting and nonsuperconducting regions within the sample at temperatures just below Tc leads to strong reductions in the critical magnetic fields.

Optimization of analytical methods for the assessment of the quality of fats and oils used in continuous deep fat frying

La aplicabilidad, repetibilidad y capacidad de diferentes métodos de análisis para discriminar muestras de aceites con diferentes grados de oxidación fueron evaluadas mediante aceites recogidos en procesos de fritura en continuo en varias empresas españolas. El objetivo de este trabajo fue encontrar métodos complementarios a la determinación del índice de acidez para el control de calidad rutinario de los aceites de fritura empleados en estas empresas. La optimización de la determinación de la constante dieléctrica conllevó una clara mejora de la variabilidad. No obstante, excepto en el caso del índice del ATB, el resto de métodos ensayados mostraron una menor variabilidad. La determinación del índice del ATB fue descartada ya que su sensibilidad fue insuficiente para discriminar entre aceites con diferente grado de oxidación. Los diferentes parámetros de alteración determinados en los aceites de fritura mostraron correlaciones significativas entre el índice de acidez y varios parámetros de oxidación diferentes, como la constante dieléctrica, el índice de p-anisidina, la absorción al ultravioleta y el contenido en polímeros de los triacilgliceroles. El índice de acidez solo evalúa la alteración hidrolítica, por lo que estos parámetros aportan información complementaria al evaluar la alteración termooxidativa.

Mean first-passage time of continuous non-Markovian processes driven by colored noise

An equation for mean first-passage times of non-Markovian processes driven by colored noise is derived through an appropriate backward integro-differential equation. The equation is solved in a Bourret-like approximation. In a weak-noise bistable situation, non-Markovian effects are taken into account by an effective diffusion coefficient. In this situation, our results compare satisfactorily with other approaches and experimental data.

The european higher education area at work: Lights and shadows defining continuous assessment

The aim of this paper is to analyse how learning assessment, particularly the Continuous Assessment system, has been defined in the Public Administration and Management Diploma Course of the University of Barcelona (Spain). This course was a pioneering experiment at this university in implementing the guidelines of the European Higher Education Area (EHEA), and thus represents a good case study for verifying whether one of the cornerstones of the EHEA has been accomplished with success. Using data obtained from the Teaching Plans elaborated by the lecturers of each subject, we are able to establish that the CA system has been progressively accepted to such an extent that it is now the assessment formula used by practically all of the lecturers, conforming in this way to the protocols laid down by the Faculty of Law in which this diploma course is taught. Nevertheless, we find that high dispersion exists in how Continuous Assessment is actually defined. Indeed, it seems that there is no unified view of how Continuous Assessment should be performed. This dispersion, however, seems to diminish over time and raises some questions about the advisability of agreement on criteria, considering the potential which CA has as a pedagogical tool. Moreover, we find that the Unique Assessment system, which students may also apply for, is an option chosen only by a minority, with lecturers usually defining it as merely a theoretical and/or practical test, of little innovation in relation to traditional tests.

The european higher education area at work: Lights and shadows defining continuous assessment

The aim of this paper is to analyse how learning assessment, particularly the Continuous Assessment system, has been defined in the Public Administration and Management Diploma Course of the University of Barcelona (Spain). This course was a pioneering experiment at this university in implementing the guidelines of the European Higher Education Area (EHEA), and thus represents a good case study for verifying whether one of the cornerstones of the EHEA has been accomplished with success. Using data obtained from the Teaching Plans elaborated by the lecturers of each subject, we are able to establish that the CA system has been progressively accepted to such an extent that it is now the assessment formula used by practically all of the lecturers, conforming in this way to the protocols laid down by the Faculty of Law in which this diploma course is taught. Nevertheless, we find that high dispersion exists in how Continuous Assessment is actually defined. Indeed, it seems that there is no unified view of how Continuous Assessment should be performed. This dispersion, however, seems to diminish over time and raises some questions about the advisability of agreement on criteria, considering the potential which CA has as a pedagogical tool. Moreover, we find that the Unique Assessment system, which students may also apply for, is an option chosen only by a minority, with lecturers usually defining it as merely a theoretical and/or practical test, of little innovation in relation to traditional tests.

The european higher education area at work: Lights and shadows defining continuous assessment

The aim of this paper is to analyse how learning assessment, particularly the Continuous Assessment system, has been defined in the Public Administration and Management Diploma Course of the University of Barcelona (Spain). This course was a pioneering experiment at this university in implementing the guidelines of the European Higher Education Area (EHEA), and thus represents a good case study for verifying whether one of the cornerstones of the EHEA has been accomplished with success. Using data obtained from the Teaching Plans elaborated by the lecturers of each subject, we are able to establish that the CA system has been progressively accepted to such an extent that it is now the assessment formula used by practically all of the lecturers, conforming in this way to the protocols laid down by the Faculty of Law in which this diploma course is taught. Nevertheless, we find that high dispersion exists in how Continuous Assessment is actually defined. Indeed, it seems that there is no unified view of how Continuous Assessment should be performed. This dispersion, however, seems to diminish over time and raises some questions about the advisability of agreement on criteria, considering the potential which CA has as a pedagogical tool. Moreover, we find that the Unique Assessment system, which students may also apply for, is an option chosen only by a minority, with lecturers usually defining it as merely a theoretical and/or practical test, of little innovation in relation to traditional tests.

Solid phase crystallization under continuous heating: kinetic and microstructure scaling laws

The kinetics and microstructure of solid-phase crystallization under continuous heating conditions and random distribution of nuclei are analyzed. An Arrhenius temperature dependence is assumed for both nucleation and growth rates. Under these circumstances, the system has a scaling law such that the behavior of the scaled system is independent of the heating rate. Hence, the kinetics and microstructure obtained at different heating rates differ only in time and length scaling factors. Concerning the kinetics, it is shown that the extended volume evolves with time according to αex = [exp(κCt′)]m+1, where t′ is the dimensionless time. This scaled solution not only represents a significant simplification of the system description, it also provides new tools for its analysis. For instance, it has been possible to find an analytical dependence of the final average grain size on kinetic parameters. Concerning the microstructure, the existence of a length scaling factor has allowed the grain-size distribution to be numerically calculated as a function of the kinetic parameters

Statistical modeling of bowing control applied to violin sound synthesis

Excitation-continuous music instrument control patterns are often not explicitly represented in current sound synthesis techniques when applied to automatic performance. Both physical model-based and sample-based synthesis paradigmswould benefit from a flexible and accurate instrument control model, enabling the improvement of naturalness and realism. Wepresent a framework for modeling bowing control parameters inviolin performance. Nearly non-intrusive sensing techniques allow for accurate acquisition of relevant timbre-related bowing control parameter signals.We model the temporal contour of bow velocity, bow pressing force, and bow-bridge distance as sequences of short Bézier cubic curve segments. Considering different articulations, dynamics, and performance contexts, a number of note classes are defined. Contours of bowing parameters in a performance database are analyzed at note-level by following a predefined grammar that dictates characteristics of curve segment sequences for each of the classes in consideration. As a result, contour analysis of bowing parameters of each note yields an optimal representation vector that is sufficient for reconstructing original contours with significant fidelity. From the resulting representation vectors, we construct a statistical model based on Gaussian mixtures suitable for both the analysis and synthesis of bowing parameter contours. By using the estimated models, synthetic contours can be generated through a bow planning algorithm able to reproduce possible constraints caused by the finite length of the bow. Rendered contours are successfully used in two preliminary synthesis frameworks: digital waveguide-based bowed stringphysical modeling and sample-based spectral-domain synthesis.

Avalanche-like vortex penetration driven by pulsed microwave fields in an epitaxial LaSrCuO thin film

Different vortex penetration regimes have been registered in the output voltage signal of a magnetometer when single microwave pulses are applied to an epitaxial overdoped La2− x Sr x CuO4 thin film in a perpendicular dc magnetic field. The onset of a significant variation in the sample magnetization which exists below threshold values of temperature, dc magnetic field, and pulse duration is interpreted as an avalanche-type flux penetration. The microwave contribution to the background electric field suggests that the nucleation of this fast vortex motion is of electric origin, which also guarantees the occurrence of vortex instabilities under adiabatic conditions via the enhancement of the flux flow resistivity. Flux creep phenomena and heat transfer effects act as stabilizing factors against the microwave-pulse-induced fast flux diffusion.