Irrigation performance and gross water productivity in furrow-irrigated ornamental tree production

In the ornamental plant production region of Girona (Spain), which is one of the largest of its kind in southern Europe, most of the surface is irrigated using wide blocked-end furrows. The objectives of this paper were: (1) to evaluate the irrigation scheduling methods used by ornamental plant producers; (2) to analyse different scenarios in order to assess how they affect irrigation performance; (3) to evaluate the risk of deep percolation; and (4) to calculate gross water productivity. A two-year study in a representative commercial field, planted with Prunus cerasifera ‘Nigra’, was carried out. The irrigation dose applied by the farmers was slightly smaller than the required water dose estimated by the use of two different methods: the first based on soil water content, and the second based on evapotranspiration. Distribution uniformity and application eff iciency were high, with mean values above 87%. Soil water content measurements revealed that even at the end of the furrow, where the infiltrated water depth was greatest, more than 90% of the infiltrated water was retained in the shallowest 40 cm of the soil; accordingly, the risk of water loss due to deep percolation was minimal. Gross water productivity for ornamental tree production was € 11.70 m–3, approximately 20 times higher than that obtained with maize in the same region.

Electrical pump & probe and injected carrier losses quantification in Er doped Si slot waveguides

Electrically driven Er3+ doped Si slot waveguides emitting at 1530 nm are demonstrated. Two different Er3+ doped active layers were fabricated in the slot region: a pure SiO2 and a Si-rich oxide. Pulsed polarization driving of the waveguides was used to characterize the time response of the electroluminescence (EL) and of the signal probe transmission in 1 mm long waveguides. Injected carrier absorption losses modulate the EL signal and, since the carrier lifetime is much smaller than that of Er3+ ions, a sharp EL peak was observed when the polarization was switched off. A time-resolved electrical pump & probe measurement in combination with lock-in amplifier techniques allowed to quantify the injected carrier absorption losses. We found an extinction ratio of 6 dB, passive propagation losses of about 4 dB/mm, and a spectral bandwidth > 25 nm at an effective d.c. power consumption of 120 μW. All these performances suggest the usage of these devices as electro-optical modulators.

Assessing trends in insured losses from floods in Spain 1971-2008

Economic impacts from floods have been increasing over recent decades, a fact often attributed to a changing climate. On the other hand, there is now a significant body of scientific scholarship all pointing towards increasing concentrations and values of assets as the principle cause of the increasing cost of natural disasters. This holds true for a variety of perils and across different jurisdictions. With this in mind, this paper examines the time history of insured losses from floods in Spain between 1971 and 2008. It as- sesses whether any discernible residual signal remains after adjusting the data for the increase in the number and value of insured assets over this period of time. Data on insured losses from floods were sourced from Consorcio de Com- pensacíon de Seguros (CCS). Although a public institution, CCS compensates homeowners for the damage produced by floods, and thus plays a role similar to that of a private insurance company. Insured losses were adjusted using two proxy measures: first, changes in the total amount of annual surcharges (premiums) paid by customers to CCS, and secondly, changes in the total value of dwellings per year. The adjusted data reveals no significant trend over the period 1971-2008 and serves again to confirm that at this juncture, societal in- fluences remain the prime factors driving insured and economic losses from natural disasters.

Labor Mobility and Productivity Growth

[cat] Els models de creixement amb aprenentatge suposen que el coneixement après en producció es transmet de forma lliure i instantània a tota l'economia. En con- seqüència, l'economia presenta economies d'escala creixents i el creixement de la productivitat (TFP) és endògena. No obstant, el supòsit de difusió instantània del coneixement és poc realista. La difusió del coneixement necessita temps i algun canal de transmissió. En aquest article suposem que el coneixement es transmet amb la contractació de treballadors nous (learning-by-hiring). En el nostre model la difusió instantània i lliure de coneixement pot ocórrer només dins d'un sector. La difusió de coneixement entre sectors pot ocórrer només a través de la mobilitat de treballadors, i per tant, el mercat de treball determina el nivell i la taxa de creixement de productivitat (TFP). Estudiem com els costos de mobilitat laboral modifiquen l'equilibri sota dos escenaris: creixement endogen i exogen. A més, demostrem que d'altres ineficiències del mercat laboral, com són les taxes o els costos de cerca, poden reduir la mobilitat laboral, i per tant, modificar la TFP.

Labor Mobility and Productivity Growth

[cat] Els models de creixement amb aprenentatge suposen que el coneixement après en producció es transmet de forma lliure i instantània a tota l'economia. En con- seqüència, l'economia presenta economies d'escala creixents i el creixement de la productivitat (TFP) és endògena. No obstant, el supòsit de difusió instantània del coneixement és poc realista. La difusió del coneixement necessita temps i algun canal de transmissió. En aquest article suposem que el coneixement es transmet amb la contractació de treballadors nous (learning-by-hiring). En el nostre model la difusió instantània i lliure de coneixement pot ocórrer només dins d'un sector. La difusió de coneixement entre sectors pot ocórrer només a través de la mobilitat de treballadors, i per tant, el mercat de treball determina el nivell i la taxa de creixement de productivitat (TFP). Estudiem com els costos de mobilitat laboral modifiquen l'equilibri sota dos escenaris: creixement endogen i exogen. A més, demostrem que d'altres ineficiències del mercat laboral, com són les taxes o els costos de cerca, poden reduir la mobilitat laboral, i per tant, modificar la TFP.

Subsurface drip irrigation emitter spacing effects on soil water redistribution, corn yield and water productivity

Emitter spacings of 0.3 to 0.6 m are commonly used for subsurface drip irrigation (SDI) of corn on the deep, silt loam soils of the U.S. Great Plains. Subsurface drip irrigation emitter spacings of 0.3, 0.6, 0.9 and 1.2 m were examined for the resulting differences in soil water redistribution, corn grain yield, yield components, seasonal water use, and water productivity in a 4‐year field study (2005 through 2008) at the Kansas State University Northwest Research‐Extension Center, Colby, Kansas. The results indicate that there is increased preferential water movement along the dripline (parallel) as compared to perpendicular to the dripline and that this phenomenon partially compensates for wider emitter spacings in terms of soil water redistribution. Corn yield and water productivity (WP) were not significantly affected by the emitter spacing with application of a full irrigation regime

Bernoulli correction to viscous losses: Radial flow between two parallel discs

For a massless fluid (density = 0), the steady flow along a duct is governed exclusively by viscous losses. In this paper, we show that the velocity profile obtained in this limit can be used to calculate the pressure drop up to the first order in density. This method has been applied to the particular case of a duct, defined by two plane-parallel discs. For this case, the first-order approximation results in a simple analytical solution which has been favorably checked against numerical simulations. Finally, an experiment has been carried out with water flowing between the discs. The experimental results show good agreement with the approximate solution

Productivity and innovation spillovers: Micro evidence from Spain

This article analyses the impact that innovation expenditure and intrasectoral and intersectoral externalities have on productivity in Spanish firms. While there is an extensive literature analysing the relationship between innovation and productivity, in this particular area there are far fewer studies that examine the importance of sectoral externalities, especially with the focus on Spain. One novelty of the study, which covers the industrial and service sectors, is that we also consider jointly the technology level of the sector in which the firm operates and the firm size. The database used is the Technological Innovation Panel, PITEC, which includes 12,813 firms for the year 2008 and has been little used in this type of study. The estimation method used is Iteratively Reweighted Least Squares method, IRLS, which is very useful for obtaining robust estimations in the presence of outliers. The results confirm that innovation has a positive effect on productivity, especially in high-tech and large firms. The impact of externalities is more heterogeneous because, while intrasectoral externalities have a poitive and significant effect, especially in low-tech firms independently of size, intersectoral externalities have a more ambiguous effect, being clearly significant for advanced industries in which size has a positive effect.

The Transatlantic Productivity Gap : Is R&D the Main Culprit?

The literature has pointed to different causes to explain the productivity gap between Europe and United States in the last decades. This paper tests the hypothesis that the lower European productivity performance in comparison with the US can be explained not only by a lower level of corporate R&D investment, but also by a lower capacity to translate R&D investment into productivity gains. The proposed microeconometric estimates are based on a unique longitudinal database covering the period 1990-2008 and comprising 1.809 US and European companies for a total of 16.079 observations. Consistent with previous literature, we find robust evidence of a significant impact of R&D on productivity, however – using different estimation techniques - the R&D coefficients for the US firms always turn out to be significantly higher. To see to what extent these transatlantic differences may be related to the different sectoral structures in the US and the EU, we differentiated the analysis by sectors. The result is that both in manufacturing, services and high-tech sectors US firms are more efficient in translating their R&D investments into productivity increases.

Using computational fluid dynamics to predict head losses in the auxiliary elements of a microirrigation sand filter

It is often assumed that total head losses in a sand filter are solely due to the filtration media and that there are analytical solutions, such as the Ergun equation, to compute them. However, total head losses are also due to auxiliary elements (inlet and outlet pipes and filter nozzles), which produce undesirable head losses because they increase energy requirements without contributing to the filtration process. In this study, ANSYS Fluent version 6.3, a commercial computational fluid dynamics (CFD) software program, was used to compute head losses in different parts of a sand filter. Six different numerical filter models of varying complexities were used to understand the hydraulic behavior of the several filter elements and their importance in total head losses. The simulation results show that 84.6% of these were caused by the sand bed and 15.4% were due to auxiliary elements (4.4% in the outlet and inlet pipes, and 11.0% in the perforated plate and nozzles). Simulation results with different models show the important role of the nozzles in the hydraulic behavior of the sand filter. The relationship between the passing area through the nozzles and the passing area through the perforated plate is an important design parameter for the reduction of total head losses. A reduced relationship caused by nozzle clogging would disproportionately increase the total head losses in the sand filter

Quality in work and aggregate productivity

We explore the relationship between quality in work and aggregate productivity in regions and sectors. Using recent Spanish aggregate data for the period 2001-2006, we find that quality in work may be an important factor to explain productivity levels in sectors and regions. We use two alternatives definitions of quality in work: one from survey data and the other from a social indicators approach. We also use two different measurements of labour productivity to test the robustness of our results. The estimates are run using a simultaneous equation model for our panel of data, and find important differences between high tech and low tech sectors: a positive relationship between quality in work and productivity in the former case, and a negative relationship in the latter. Consequently, on the one hand we see that quality in work is not only an objective per se, but may also be a production factor able to increase the wealth of regions; on the other hand, at the aggregate level, we may also find that high productivity levels coincide with lower quality in work conditions.

Human Capital Spillovers Productivity and Regional Convergence in Spain

This paper analyses the differential impact of human capital, in terms of different levels of schooling, on regional productivity and convergence. The potential existence of geographical spillovers of human capital is also considered by applying spatial panel data techniques. The empirical analysis of Spanish provinces between 1980 and 2007 confirms the positive impact of human capital on regional productivity and convergence, but reveals no evidence of any positive geographical spillovers of human capital. In fact, in some specifications the spatial lag presented by tertiary studies has a negative effect on the variables under consideration.

What explains productivity differentials across spanish cities?

This paper estimates the determinants of productivity differentials across urban areas in Spain. To do so we resort to Spanish Social Security administrative data (MCVL) matched with workers’ fiscal information. We use two-step approach that allows us to control for the confounding effects due to the sorting of more productive workers and more productive firms in bigger cities. Our results indicate that city size is a significant determinant of productivity differentials across Spanish urban areas. We estimate an elasticity of urban agglomeration of 3.3%, which is within the range of values already observed in other countries. We also find that the level of human capital, firm size and the level of industrial specialization also matters in order explain productivity differentials across Spanish cities. Keywords: Agglomeration, wages, productivity, city size. JEL codes: R10, R23, J31

Job losses, outsourcing and relocation: empirical evidence using microdata

Using microdata, we analyse the determinants of firm relocation and conventional outsourcing decisions as a way to reduce employment. The results for a sample of 32 countries show the relevance of factors not considered previously in the literature. Firms that are below average in quality or innovation have a higher propensity to externalise part of their production through outsourcing, while lower relative profitability and longer time to market for new products each imply a higher probability of relocation.

Decomposing differences in total factor productivity across firm size

This paper investigates the extent to which the gap in total factor productivity between small and large firms is due to differences in the endowment of factors determining productivity and to the returns associated with these factors. We place particular emphasis on the contribution of differences in the propensity to innovate and in the use of skilled labor across firms of different size. Empirical evidence from a representative sample of Spanish manufacturing firms corroborates that both differences in endowments and returns to innovation and skilled labor significantly contribute to the productivity gap between small and large firms. In addition, it is observed that the contribution of innovation to this gap is caused only by differences in quantity, while differences in returns have no effect; in the case of human capital, however, most of the effect can be attributed to increasing differences in returns between small and large firms.