Thermal modeling and management in ultrathin chip stack technology

This paper presents a thermal modeling for power management of a new three-dimensional (3-D) thinned dies stacking process. Besides the high concentration of power dissipating sources, which is the direct consequence of the very interesting integration efficiency increase, this new ultra-compact packaging technology can suffer of the poor thermal conductivity (about 700 times smaller than silicon one) of the benzocyclobutene (BCB) used as both adhesive and planarization layers in each level of the stack. Thermal simulation was conducted using three-dimensional (3-D) FEM tool to analyze the specific behaviors in such stacked structure and to optimize the design rules. This study first describes the heat transfer limitation through the vertical path by examining particularly the case of the high dissipating sources under small area. First results of characterization in transient regime by means of dedicated test device mounted in single level structure are presented. For the design optimization, the thermal draining capabilities of a copper grid or full copper plate embedded in the intermediate layer of stacked structure are evaluated as a function of the technological parameters and the physical properties. It is shown an interest for the transverse heat extraction under the buffer devices dissipating most the power and generally localized in the peripheral zone, and for the temperature uniformization, by heat spreading mechanism, in the localized regions where the attachment of the thin die is altered. Finally, all conclusions of this analysis are used for the quantitative projections of the thermal performance of a first demonstrator based on a three-levels stacking structure for space application.

On the industry experience premium and labor mobility

[cat] Hi ha evidència que l'experiència es remunera diferentment segons la indústria. Proposem un model teòric que explica aquestes diferències. Suposem que la mobilitat de treballadors aporta coneixement extern a l'empresa i això augmenta la seva productivitat. Els resultats mostren que l'experiència és millor remunerada en les indústries amb costos de mobilitat baixos, amb molt aprenentatge (learning-by-doing) i alt nivell tecnològic. A més, trobem una relació en forma de U entre la remuneració de l'experiència i el nivell d'absorció de coneixement extern, la substitutibilitat entre diferents tipus de treballadors i la varietat de coneixement dins la indústria. Els resultats són consistents amb l'evidència que les indústries intensives en I and D remuneren millor l'experiència.

Modeling premartensitic effects in Ni2MnGa: A mean-field and Monte Carlo simulation study

ic first-order transition line ending in a critical point. This critical point is responsible for the existence of large premartensitic fluctuations which manifest as broad peaks in the specific heat, not always associated with a true phase transition. The main conclusion is that premartensitic effects result from the interplay between the softness of the anomalous phonon driving the modulation and the magnetoelastic coupling. In particular, the premartensitic transition occurs when such coupling is strong enough to freeze the involved mode phonon. The implication of the results in relation to the available experimental data is discussed.

Modeling a processive molecular motor: the conventional kinesin

We present a model that allows for the derivation of the experimentally accesible observables: spatial steps, mean velocity, stall force, useful power, efficiency and randomness, etc. as a function of the [adenosine triphosphate] concentration and an external load F. The model presents a minimum of adjustable parameters and the theoretical predictions compare well with the available experimental results.

Preisach modeling of hysteresis for a pseudoelastic Cu-Zn-Al single crystal

Stress-strain trajectories associated with pseudoelastic behavior of a Cu¿19.4 Zn¿13.1 Al (at.%) single crystal at room temperature have been determined experimentally. For a constant cross-head speed the trajectories and the associated hysteresis behavior are perfectly reproducible; the trajectories exhibit memory properties, dependent only on the values of return points, where transformation direction is reverted. An adapted version of the Preisach model for hysteresis has been implemented to predict the observed trajectories, using a set of experimental first¿order reversal curves as input data. Explicit formulas have been derived giving all trajectories in terms of this data set, with no adjustable parameters. Comparison between experimental and calculated trajectories shows a much better agreement for descending than for ascending paths, an indication of a dissymmetry between the dissipation mechanisms operative in forward and reverse directions of martensitic transformation.

Symmetries and fixed point stability of stochastic differential equations modeling self-organized criticality

A stochastic nonlinear partial differential equation is constructed for two different models exhibiting self-organized criticality: the Bak-Tang-Wiesenfeld (BTW) sandpile model [Phys. Rev. Lett. 59, 381 (1987); Phys. Rev. A 38, 364 (1988)] and the Zhang model [Phys. Rev. Lett. 63, 470 (1989)]. The dynamic renormalization group (DRG) enables one to compute the critical exponents. However, the nontrivial stable fixed point of the DRG transformation is unreachable for the original parameters of the models. We introduce an alternative regularization of the step function involved in the threshold condition, which breaks the symmetry of the BTW model. Although the symmetry properties of the two models are different, it is shown that they both belong to the same universality class. In this case the DRG procedure leads to a symmetric behavior for both models, restoring the broken symmetry, and makes accessible the nontrivial fixed point. This technique could also be applied to other problems with threshold dynamics.

Analytical Measures of Learners' Written Interlanguage

This paper aims at reconsidering some analytical measures to best encapsulate the interlanguage, in writing, of young beginner learners of English as a foreign language in the light of previous and work-in-progress research conducted within the BAF project, and in particular, whether clause and sentence length should be best viewed as a fluency or syntactic complexity measusre or as part of a different construct. In the light of a factor analysis (Navés, forthcoming) and multivariate and correlation studies (Navés et al. 2003, Navés, 2006, Torres et al. 2006) it becomes clear that the relationship between different analytical measures is also dependent on learner¿s cognitive maturity (age) and proficiency (amount of instruction). Finally, clause and sentence length should not be viewed as either a fluency or sytactic complexity measure but as part of a different construct. It is concluded that further research using regression analysis and cluster analysis is neeed in order to identify and validate the constructs of the writing components and their measurements.

On the industry experience premium and labor mobility

[cat] Hi ha evidència que l'experiència es remunera diferentment segons la indústria. Proposem un model teòric que explica aquestes diferències. Suposem que la mobilitat de treballadors aporta coneixement extern a l'empresa i això augmenta la seva productivitat. Els resultats mostren que l'experiència és millor remunerada en les indústries amb costos de mobilitat baixos, amb molt aprenentatge (learning-by-doing) i alt nivell tecnològic. A més, trobem una relació en forma de U entre la remuneració de l'experiència i el nivell d'absorció de coneixement extern, la substitutibilitat entre diferents tipus de treballadors i la varietat de coneixement dins la indústria. Els resultats són consistents amb l'evidència que les indústries intensives en I and D remuneren millor l'experiència.

Modeling storm events to investigate the influence of the stream¿catchment interface zone on stream biogeochemistry

We formulate a new mixing model to explore hydrological and chemical conditions under which the interface between the stream and catchment interface (SCI) influences the release of reactive solutes into stream water during storms. Physically, the SCI corresponds to the hyporheic/riparian sediments. In the new model this interface is coupled through a bidirectional water exchange to the conventional two components mixing model. Simulations show that the influence of the SCI on stream solute dynamics during storms is detectable when the runoff event is dominated by the infiltrated groundwater component that flows through the SCI before entering the stream and when the flux of solutes released from SCI sediments is similar to, or higher than, the solute flux carried by the groundwater. Dissolved organic carbon (DOC) and nitrate data from two small Mediterranean streams obtained during storms are compared to results from simulations using the new model to discern the circumstances under which the SCI is likely to control the dynamics of reactive solutes in streams. The simulations and the comparisons with empirical data suggest that the new mixing model may be especially appropriate for streams in which the periodic, or persistent, abrupt changes in the level of riparian groundwater exert hydrologic control on flux of biologically reactive fluxes between the riparian/hyporheic compartment and the stream water.

Analytical Measures of Learners' Written Interlanguage

This paper aims at reconsidering some analytical measures to best encapsulate the interlanguage, in writing, of young beginner learners of English as a foreign language in the light of previous and work-in-progress research conducted within the BAF project, and in particular, whether clause and sentence length should be best viewed as a fluency or syntactic complexity measusre or as part of a different construct. In the light of a factor analysis (Navés, forthcoming) and multivariate and correlation studies (Navés et al. 2003, Navés, 2006, Torres et al. 2006) it becomes clear that the relationship between different analytical measures is also dependent on learner¿s cognitive maturity (age) and proficiency (amount of instruction). Finally, clause and sentence length should not be viewed as either a fluency or sytactic complexity measure but as part of a different construct. It is concluded that further research using regression analysis and cluster analysis is neeed in order to identify and validate the constructs of the writing components and their measurements.

Mobile robot experimental modeling and control strategies using sensor fusion

This research work deals with the problem of modeling and design of low level speed controller for the mobile robot PRIM. The main objective is to develop an effective educational, and research tool. On one hand, the interests in using the open mobile platform PRIM consist in integrating several highly related subjects to the automatic control theory in an educational context, by embracing the subjects of communications, signal processing, sensor fusion and hardware design, amongst others. On the other hand, the idea is to implement useful navigation strategies such that the robot can be served as a mobile multimedia information point. It is in this context, when navigation strategies are oriented to goal achievement, that a local model predictive control is attained. Hence, such studies are presented as a very interesting control strategy in order to develop the future capabilities of the system. In this context the research developed includes the visual information as a meaningful source that allows detecting the obstacle position coordinates as well as planning the free obstacle trajectory that should be reached by the robot

User experience strategy

L'objectiu d'aquest projecte era desenvolupar una metodologia de user experience strategy per aconseguir que el client d'una pàgina web tingui una mateixa experiència tant si fa servir una plataforma com una altra, aplicant diferents tècniques de disseny centrades en l'usuari.

Exploring the rate-limiting steps in visual phototransduction recovery by bottom-up kinetic modeling

Phototransduction in vertebrate photoreceptor cells represents a paradigm of signaling pathways mediated by G-protein-coupled receptors (GPCRs), which share common modules linking the initiation of the cascade to the final response of the cell. In this work, we focused on the recovery phase of the visual photoresponse, which is comprised of several interacting mechanisms. We employed current biochemical knowledge to investigate the response mechanisms of a comprehensive model of the visual phototransduction pathway. In particular, we have improved the model by implementing a more detailed representation of the recoverin (Rec)-mediated calcium feedback on rhodopsin kinase and including a dynamic arrestin (Arr) oligomerization mechanism. The model was successfully employed to investigate the rate limiting steps in the recovery of the rod photoreceptor cell after illumination. Simulation of experimental conditions in which the expression levels of rhodospin kinase (RK), of the regulator of the G-protein signaling (RGS), of Arr and of Rec were altered individually or in combination revealed severe kinetic constraints to the dynamics of the overall network. Our simulations confirm that RGS-mediated effector shutdown is the rate-limiting step in the recovery of the photoreceptor and show that the dynamic formation and dissociation of Arr homodimers and homotetramers at different light intensities significantly affect the timing of rhodopsin shutdown. The transition of Arr from its oligomeric storage forms to its monomeric form serves to temper its availability in the functional state. Our results may explain the puzzling evidence that overexpressing RK does not influence the saturation time of rod cells at bright light stimuli. The approach presented here could be extended to the study of other GPCR signaling pathways.