Disseny, creació i implementació de sistema e-comerce

Aquest projecte consisteix en la creació d'una botiga virtual per a l'empresa CREATIFHPROMOS, companyia del sector del reclam publicitari; per a dur a terme aquest projecte, es realitzarà un estudi de les plataformes actuals de comerç electrònic “Open Source” desenvolupades en PHP, per tal de, a partir dels requeriments de l'empresa, seleccionar la més adient per a la seva implantació,i, en cas de ser necessari, desenvolupar nous mòduls i funcionalitats per adaptar als requeriments recollits.

Influence of label information on dark chocolate acceptability

The aim of the present work was to study how the information on product labels influences consumer expectations and their acceptance and purchase intention of dark chocolate. Six samples of dark choco- late, varying in brand (premium and store brand) and in type of product (regular dark chocolate, single cocoa origin dark chocolate and high percentage of cocoa dark chocolate), were evaluated by 109 con- sumers who scored their liking and purchase intention under three conditions: blind (only tasting the products), expected (observing product label information) and informed (tasting the products together with provision of the label information). In the expected condition, consumer liking was mainly affected by the brand. In the blind condition, differences in liking were due to the type of product; the samples with a high percentage of cocoa were those less preferred by consumers. Under the informed condition, liking of dark chocolates varied depending on both brand and type of product. Premium brand chocolates generated high consumer expectations of chocolate acceptability, which were fulfilled by the sensory characteristics of the products. Store brand chocolates created lower expectations, but when they were tasted they were as acceptable as premium chocolates. Claims of a high percentage of cocoa and single cocoa origin on labels did not generate higher expectations than regular dark chocolates.

Modeling and control of electromechanical systems

The material presented in the these notes covers the sessions Modelling of electromechanical systems, Passive control theory I and Passive control theory II of the II EURON/GEOPLEX Summer School on Modelling and Control of Complex Dynamical Systems.We start with a general description of what an electromechanical system is from a network modelling point of view. Next, a general formulation in terms of PHDS is introduced, and some of the previous electromechanical systems are rewritten in this formalism. Power converters, which are variable structure systems (VSS), can also be given a PHDS form.We conclude the modelling part of these lectures with a rather complex example, showing the interconnection of subsystems from several domains, namely an arrangement to temporally store the surplus energy in a section of a metropolitan transportation system based on dc motor vehicles, using either arrays of supercapacitors or an electric poweredflywheel. The second part of the lectures addresses control of PHD systems. We first present the idea of control as power connection of a plant and a controller. Next we discuss how to circumvent this obstacle and present the basic ideas of Interconnection and Damping Assignment (IDA) passivity-based control of PHD systems.

Tenda Virtual

Aquest projecte està principalment destinat a aconseguir un bon maneig d'algunes de les eines involucrades en aquest tema, com són JSP, TOMCAT i Struts 2 per a les necessitats web i MySQL per al registre de materials i transaccions.

Gaia photometry for white dwarfs

Context. White dwarfs can be used to study the structure and evolution of the Galaxy by analysing their luminosity function and initial mass function. Among them, the very cool white dwarfs provide the information for the early ages of each population. Because white dwarfs are intrinsically faint only the nearby (~ 20 pc) sample is reasonably complete. The Gaia space mission will drastically increase the sample of known white dwarfs through its 5-6 years survey of the whole sky up to magnitude V = 20-25. Aims. We provide a characterisation of Gaia photometry for white dwarfs to better prepare for the analysis of the scientific output of the mission. Transformations between some of the most common photometric systems and Gaia passbands are derived. We also give estimates of the number of white dwarfs of the different galactic populations that will be observed. Methods. Using synthetic spectral energy distributions and the most recent Gaia transmission curves, we computed colours of three different types of white dwarfs (pure hydrogen, pure helium, and mixed composition with H/He = 0.1). With these colours we derived transformations to other common photometric systems (Johnson-Cousins, Sloan Digital Sky Survey, and 2MASS). We also present numbers of white dwarfs predicted to be observed by Gaia. Results. We provide relationships and colourcolour diagrams among different photometric systems to allow the prediction and/or study of the Gaia white dwarf colours. We also include estimates of the number of sources expected in every galactic population and with a maximum parallax error. Gaia will increase the sample of known white dwarfs tenfold to about 200 000. Gaia will be able to observe thousands of very cool white dwarfs for the first time, which will greatly improve our understanding of these stars and early phases of star formation in our Galaxy.

Construcció i explotació d'un magatzem de dades per a l'anàlisi d'informació sobre trànsit rodat de vehicles

Aquest document defineix la construcció i explotació d'un magatzem de dades per a la Fundació d'Estudis per a la Conducció Responsable. L'objectiu del projecte és homogeneïtzar la informació que rep la fundació, des de diverses fonts i en diferents formats, consolidar-la en un únic magatzem de dades i habilitar eines que facilitin la seva explotació i anàlisi. La consecució d'aquestes fites és determinant perquè la direcció conegui l'evolució del trànsit rodat de vehicles a Catalunya i minimitzi el riscos en cas de qualsevol presa de decisions.

Extending Learning Objects by Means of Social Networking

Learning objects have been the promise of providing people with high quality learning resources. Initiatives such as MIT Open-CourseWare, MERLOT and others have shown the real possibilities of creating and sharing knowledge through Internet. Thousands of educational resources are available through learning object repositories. We indeed live in an age of content abundance, and content can be considered as infrastructure for building adaptive and personalized learning paths, promoting both formal and informal learning. Nevertheless, although most educational institutions are adopting a more open approach, publishing huge amounts of educational resources, the reality is that these resources are barely used in other educational contexts. This paradox can be partly explained by the dificulties in adapting such resources with respect to language, e-learning standards and specifications and, finally, granularity. Furthermore, if we want our learners to use and take advantage of learning object repositories, we need to provide them with additional services than just browsing and searching for resources. Social networks can be a first step towards creating an open social community of learning around a topic or a subject. In this paper we discuss and analyze the process of using a learning object repository and building a social network on the top of it, with respect to the information architecture needed to capture and store the interaction between learners and resources in form of learning object metadata.

Versatile iPad forensic acquisition using the Apple Camera Connection Kit

Peer reviewed

Compact thermal storage: a-state-of-the-art review of experimental results

Thermal energy storage (TES) can increase the thermal energy effieresa, of a process by reusing the waste heat from industrial process, solar energy or other sources. There are different ways to store thermal energy: by sensible heat, by latest heat, by sorption process or by chemical reaction. This thesrs provides a-state-of-the-art review of the experimental performance of TES systems based on solid gas sorption process and chemical reactions. The importance of theses processes is that provides a heat loss free storage system with a high energy density.

Diseño e implementación de un sistema de control del consumo energético

Implementación de una base de datos transaccional para el control del consumo eléctrico mediante contadores inteligentes. La base de datos propuesta permite desarrollar los diferentes compromisos de gestión de las compañías suministradoras, consumidores, contadores, consumos y núcleos energéticos (smart cities), proporcionando los procedimientos almacenados necesarios para su gestión. También se desarrolla la implementación de una base de datos analítica, data warehouse, para la explotación de los datos almacenados en la primera parte del proyecto. El objetivo es la implementación de las entidades necesarias para la explotación analítica de los datos mediante consultas sencillas.

From room for books to room for users: an old infantry barrack as an answer to the lack of space

At the beginning of the 21st century, some Catalan university libraries detected a need stemming from the lack of space and the reconversion of physical libraries within the new European educational panorama. With the same cooperative spirit that characterized previous CBUC (Consortium of Academic Libraries of Catalonia) programs and services, the Consortium set in motion a project to address this need. An initial study was commissioned in 2002, and in 2003 a suitable building (old infantry barracks) was found in Lleida. The official opening took place in 2008. GEPA (Guaranteed Space for the Preservation of Access) facility is a cooperative repository, whose objectives are to store and preserve low use documents, ensuring their future access when needed, to convert room for books into room for library users, and doing it saving both space and money. The paper presents a brief historical introduction about the physical management of collections in libraries, and a short overview about high density library repositories all over the world, as an answer to the pressing problem of lack of spaces. The main goals of the communication are to comment the architectural project and its librarian issues, and to show how the GEPA facility allowed to change the spaces in university libraries in Catalonia. On the one hand, the paper deals with the selection of an old building to be renovated, the determination of the librarian needs, the compact shelving system chosen to store the documents in the building, the relation between physical space and information management, and the logistics involved in the load of low use documents from the libraries into the facility. On the other hand, we will show some examples of physical changes in Catalan libraries after large loads of documents to GEPA.

Gaia photometry for white dwarfs

Context. White dwarfs can be used to study the structure and evolution of the Galaxy by analysing their luminosity function and initial mass function. Among them, the very cool white dwarfs provide the information for the early ages of each population. Because white dwarfs are intrinsically faint only the nearby (~ 20 pc) sample is reasonably complete. The Gaia space mission will drastically increase the sample of known white dwarfs through its 5-6 years survey of the whole sky up to magnitude V = 20-25. Aims. We provide a characterisation of Gaia photometry for white dwarfs to better prepare for the analysis of the scientific output of the mission. Transformations between some of the most common photometric systems and Gaia passbands are derived. We also give estimates of the number of white dwarfs of the different galactic populations that will be observed. Methods. Using synthetic spectral energy distributions and the most recent Gaia transmission curves, we computed colours of three different types of white dwarfs (pure hydrogen, pure helium, and mixed composition with H/He = 0.1). With these colours we derived transformations to other common photometric systems (Johnson-Cousins, Sloan Digital Sky Survey, and 2MASS). We also present numbers of white dwarfs predicted to be observed by Gaia. Results. We provide relationships and colour-colour diagrams among different photometric systems to allow the prediction and/or study of the Gaia white dwarf colours. We also include estimates of the number of sources expected in every galactic population and with a maximum parallax error. Gaia will increase the sample of known white dwarfs tenfold to about 200 000. Gaia will be able to observe thousands of very cool white dwarfs for the first time, which will greatly improve our understanding of these stars and early phases of star formation in our Galaxy.

Differential growth responses to water balance of coexisting deciduous tree species are linked to wood density in a Bolivian tropical dry forest

A seasonal period of water deficit characterizes tropical dry forests (TDFs). There, sympatric tree species exhibit a diversity of growth rates, functional traits, and responses to drought, suggesting that each species may possess different strategies to grow under different conditions of water availability. The evaluation of the long-term growth responses to changes in the soil water balance should provide an understanding of how and when coexisting tree species respond to water deficit in TDFs. Furthermore, such differential growth responses may be linked to functional traits related to water storage and conductance. We used dendrochronology and climate data to retrospectively assess how the radial growth of seven coexisting deciduous tree species responded to the seasonal soil water balance in a Bolivian TDF. Linear mixed-effects models were used to quantify the relationships between basal area increment and seasonal water balance. We related these relationships with wood density and sapwood production to assess if they affect the growth responses to climate. The growth of all species responded positively to water balance during the wet season, but such responses differed among species as a function of their wood density. For instance, species with a strong growth response to water availability averaged a low wood density which may facilitate the storage of water in the stem. By contrast, species with very dense wood were those whose growth was less sensitive to water availability. Coexisting tree species thus show differential growth responses to changes in soil water balance during the wet season. Our findings also provide a link between wood density, a trait related to the ability of trees to store water in the stem, and wood formation in response to water availability.

Desenvolupament d'una app

El TFM ha consistit en participar i conèixer de prop tots el passos de desenvolupament d’una aplicació: elaboració d’un guió, realització de la part gràfica, programació i màrqueting. Per aquest motiu he realitzat unes hores de pràctiques a l'empresa Factoria Interactive SL. Durant aquest periòde vaig realitzar diversos guions per diferents apps relacionades amb continguts matemàtics i vaig participar en el programació de l'app "Dress up". I l'últim pas va consistir en penjar l'app a la botiga de Google Play. Per poder accedir a l'aplicació cal seguir el següent enllaç de Google Play: https://play.google.com/store/apps/details?id=eu.lafactoria.dressup&hl=es

Manipulador robótico con visión artificial

En los tiempos que corren la robótica forma uno de los pilares más importantes en la industria y una gran noticia para los ingenieros es la referente a las ventas de estos, ya que en 2013, unos 179.000 robots industriales se vendieron en todo el mundo, de nuevo un máximo histórico y un 12% más que en 2012 según datos de la IFR (International Federation of Robotics). Junto a esta noticia, la robótica colaborativa entra en juego en el momento que los robots y los seres humanos deben compartir el lugar de trabajo sin que nos veamos excluidos por las maquinas, por lo tanto lo que se intenta es que los robots mejoren la calidad del trabajo al hacerse cargo de los trabajos peligrosos, tediosos y sucios que no son posibles o seguros para los seres humanos. Otro concepto muy importante y directamente relacionado con lo anterior que está muy en boga y se escucha desde hace relativamente poco tiempo es el de la fabrica del futuro o “Factory Of The Future” la cual intenta que los operarios y los robots encuentren la sintonía en el entorno laboral y que los robots se consideren como maquinaria colaborativa y no como sustitutiva, considerándose como uno de los grandes nichos productivos en plena expansión. Dejando a un lado estos conceptos técnicos que nunca debemos olvidar si nuestra carrera profesional va enfocada en este ámbito industrial, el tema central de este proyecto está basado, como no podía ser de otro modo, en la robótica, que junto con la visión artificial, el resultado de esta fusión, ha dado un manipulador robótico al que se le ha dotado de cierta “inteligencia”. Se ha planteado un sencillo pero posible proceso de producción el cual es capaz de almacenar piezas de diferente forma y color de una forma autónoma solamente guiado por la imagen capturada con una webcam integrada en el equipo. El sistema consiste en una estructura soporte delimitada por una zona de trabajo en la cual se superponen unas piezas diseñadas al efecto las cuales deben ser almacenadas en su lugar correspondiente por el manipulador robótico. Dicho manipulador de cinemática paralela está basado en la tecnología de cables, comandado por cuatro motores que le dan tres grados de libertad (±X, ±Y, ±Z) donde el efector se encuentra suspendido sobre la zona de trabajo moviéndose de forma que es capaz de identificar las características de las piezas en situación, color y forma para ser almacenadas de una forma ordenada según unas premisas iníciales.