95 resultados para Classification algorithm
Resumo:
It is well known the relationship between source separation and blind deconvolution: If a filtered version of an unknown i.i.d. signal is observed, temporal independence between samples can be used to retrieve the original signal, in the same manner as spatial independence is used for source separation. In this paper we propose the use of a Genetic Algorithm (GA) to blindly invert linear channels. The use of GA is justified in the case of small number of samples, where other gradient-like methods fails because of poor estimation of statistics.
Resumo:
A prominent categorization of Indian classical music is the Hindustani and Carnatic traditions, the two styleshaving evolved under distinctly different historical andcultural influences. Both styles are grounded in the melodicand rhythmic framework of raga and tala. The styles differ along dimensions such as instrumentation,aesthetics and voice production. In particular, Carnatic music is perceived as being more ornamented. The hypothesisthat style distinctions are embedded in the melodic contour is validated via subjective classification tests. Melodic features representing the distinctive characteristicsare extracted from the audio. Previous work based on the extent of stable pitch regions is supported by measurements of musicians’ annotations of stable notes. Further, a new feature is introduced that captures thepresence of specific pitch modulations characteristic ofornamentation in Indian classical music. The combined features show high classification accuracy on a database of vocal music of prominent artistes. The misclassifications are seen to match actual listener confusions.
Resumo:
In this paper, a hybrid simulation-based algorithm is proposed for the StochasticFlow Shop Problem. The main idea of the methodology is to transform the stochastic problem into a deterministic problem and then apply simulation to the latter. In order to achieve this goal, we rely on Monte Carlo Simulation and an adapted version of a deterministic heuristic. This approach aims to provide flexibility and simplicity due to the fact that it is not constrained by any previous assumption and relies in well-tested heuristics.
Resumo:
A table showing a comparison and classification of tools (intelligent tutoring systems) for e-learning of Logic at a college level.
Resumo:
In this paper, a hybrid simulation-based algorithm is proposed for the StochasticFlow Shop Problem. The main idea of the methodology is to transform the stochastic problem into a deterministic problem and then apply simulation to the latter. In order to achieve this goal, we rely on Monte Carlo Simulation and an adapted version of a deterministic heuristic. This approach aims to provide flexibility and simplicity due to the fact that it is not constrained by any previous assumption and relies in well-tested heuristics.
Resumo:
The glasses of the rosette forming the main window of the transept of the Gothic Cathedral of Tarragona have been characterised by means of SEM/EDS, XRD, FTIR and electronic microprobe. The multivariate statistical treatment of these data allow to establish a classification of the samples forming groups having an historical significance and reflecting ancient restorations. Furthermore, the decay patterns and mechanisms have been determined and the weathering by-products characterised. It has been demonstrated a clear influence of the bioactivity in the decay of these glasses, which activity is partially controlled by the chemical composition of the glasses.
Resumo:
The glasses of the rosette forming the main window of the transept of the Gothic Cathedral of Tarragona have been characterised by means of SEM/EDS, XRD, FTIR and electronic microprobe. The multivariate statistical treatment of these data allow to establish a classification of the samples forming groups having an historical significance and reflecting ancient restorations. Furthermore, the decay patterns and mechanisms have been determined and the weathering by-products characterised. It has been demonstrated a clear influence of the bioactivity in the decay of these glasses, which activity is partially controlled by the chemical composition of the glasses.
Resumo:
In this work, a new one-class classification ensemble strategy called approximate polytope ensemble is presented. The main contribution of the paper is threefold. First, the geometrical concept of convex hull is used to define the boundary of the target class defining the problem. Expansions and contractions of this geometrical structure are introduced in order to avoid over-fitting. Second, the decision whether a point belongs to the convex hull model in high dimensional spaces is approximated by means of random projections and an ensemble decision process. Finally, a tiling strategy is proposed in order to model non-convex structures. Experimental results show that the proposed strategy is significantly better than state of the art one-class classification methods on over 200 datasets.
Resumo:
Este trabajo presenta un Algoritmo Genético (GA) del problema de secuenciar unidades en una línea de producción. Se tiene en cuenta la posibilidad de cambiar la secuencia de piezas mediante estaciones con acceso a un almacén intermedio o centralizado. El acceso al almacén además está restringido, debido al tamaño de las piezas.AbstractThis paper presents a Genetic Algorithm (GA) for the problem of sequencing in a mixed model non-permutation flowshop. Resequencingis permitted where stations have access to intermittent or centralized resequencing buffers. The access to a buffer is restricted by the number of available buffer places and the physical size of the products.
Resumo:
Background To analyse the extent and profile of outpatient regular dispensation of antipsychotics, both in combination and monotherapy, in the Barcelona Health Region (Spain), focusing on the use of clozapine and long-acting injections (LAI). Methods Antipsychotic drugs dispensed for people older than 18 and processed by the Catalan Health Service during 2007 were retrospectively reviewed. First and second generation antipsychotic drugs (FGA and SGA) from the Anatomical Therapeutic Chemical classification (ATC) code N05A (except lithium) were included. A patient selection algorithm was designed to identify prescriptions regularly dispensed. Variables included were age, gender, antipsychotic type, route of administration and number of packages dispensed. Results A total of 117,811 patients were given any antipsychotic, of whom 71,004 regularly received such drugs. Among the latter, 9,855 (13.9%) corresponded to an antipsychotic combination, 47,386 (66.7%) to monotherapy and 13,763 (19.4%) to unspecified combinations. Of the patients given antipsychotics in association, 58% were men. Olanzapine (37.1%) and oral risperidone (36.4%) were the most common dispensations. Analysis of the patients dispensed two antipsychotics (57.8%) revealed 198 different combinations, the most frequent being the association of FGA and SGA (62.0%). Clozapine was dispensed to 2.3% of patients. Of those who were receiving antipsychotics in combination, 6.6% were given clozapine, being clozapine plus amisulpride the most frequent association (22.8%). A total of 3.800 patients (5.4%) were given LAI antipsychotics, and 2.662 of these (70.1%) were in combination. Risperidone was the most widely used LAI. Conclusions The scant evidence available regarding the efficacy of combining different antipsychotics contrasts with the high number and variety of combinations prescribed to outpatients, as well as with the limited use of clozapine. Background To analyse the extent and profile of outpatient regular dispensation of antipsychotics, both in combination and monotherapy, in the Barcelona Health Region (Spain), focusing on the use of clozapine and long-acting injections (LAI). Methods Antipsychotic drugs dispensed for people older than 18 and processed by the Catalan Health Service during 2007 were retrospectively reviewed. First and second generation antipsychotic drugs (FGA and SGA) from the Anatomical Therapeutic Chemical classification (ATC) code N05A (except lithium) were included. A patient selection algorithm was designed to identify prescriptions regularly dispensed. Variables included were age, gender, antipsychotic type, route of administration and number of packages dispensed. Results A total of 117,811 patients were given any antipsychotic, of whom 71,004 regularly received such drugs. Among the latter, 9,855 (13.9%) corresponded to an antipsychotic combination, 47,386 (66.7%) to monotherapy and 13,763 (19.4%) to unspecified combinations. Of the patients given antipsychotics in association, 58% were men. Olanzapine (37.1%) and oral risperidone (36.4%) were the most common dispensations. Analysis of the patients dispensed two antipsychotics (57.8%) revealed 198 different combinations, the most frequent being the association of FGA and SGA (62.0%). Clozapine was dispensed to 2.3% of patients. Of those who were receiving antipsychotics in combination, 6.6% were given clozapine, being clozapine plus amisulpride the most frequent association (22.8%). A total of 3.800 patients (5.4%) were given LAI antipsychotics, and 2.662 of these (70.1%) were in combination. Risperidone was the most widely used LAI. Conclusions The scant evidence available regarding the efficacy of combining different antipsychotics contrasts with the high number and variety of combinations prescribed to outpatients, as well as with the limited use of clozapine.
Resumo:
This paper presents a novel image classification scheme for benthic coral reef images that can be applied to both single image and composite mosaic datasets. The proposed method can be configured to the characteristics (e.g., the size of the dataset, number of classes, resolution of the samples, color information availability, class types, etc.) of individual datasets. The proposed method uses completed local binary pattern (CLBP), grey level co-occurrence matrix (GLCM), Gabor filter response, and opponent angle and hue channel color histograms as feature descriptors. For classification, either k-nearest neighbor (KNN), neural network (NN), support vector machine (SVM) or probability density weighted mean distance (PDWMD) is used. The combination of features and classifiers that attains the best results is presented together with the guidelines for selection. The accuracy and efficiency of our proposed method are compared with other state-of-the-art techniques using three benthic and three texture datasets. The proposed method achieves the highest overall classification accuracy of any of the tested methods and has moderate execution time. Finally, the proposed classification scheme is applied to a large-scale image mosaic of the Red Sea to create a completely classified thematic map of the reef benthos
Resumo:
Adaptació de l'algorisme de Kumar per resoldre sistemes d'equacions amb matrius de Toeplitz sobre els reals a cossos finits en un temps 0 (n log n).
Resumo:
La principal motivació d'aquest treball ha estat implementar l'algoritme Rijndael-AES en un full Sage-math, paquet de software matemàtic de lliure distribució i en actual desenvolupament, aprofitant les seves eines i funcionalitats integrades.
Resumo:
Background: Development of three classification trees (CT) based on the CART (Classification and Regression Trees), CHAID (Chi-Square Automatic Interaction Detection) and C4.5 methodologies for the calculation of probability of hospital mortality; the comparison of the results with the APACHE II, SAPS II and MPM II-24 scores, and with a model based on multiple logistic regression (LR). Methods: Retrospective study of 2864 patients. Random partition (70:30) into a Development Set (DS) n = 1808 and Validation Set (VS) n = 808. Their properties of discrimination are compared with the ROC curve (AUC CI 95%), Percent of correct classification (PCC CI 95%); and the calibration with the Calibration Curve and the Standardized Mortality Ratio (SMR CI 95%). Results: CTs are produced with a different selection of variables and decision rules: CART (5 variables and 8 decision rules), CHAID (7 variables and 15 rules) and C4.5 (6 variables and 10 rules). The common variables were: inotropic therapy, Glasgow, age, (A-a)O2 gradient and antecedent of chronic illness. In VS: all the models achieved acceptable discrimination with AUC above 0.7. CT: CART (0.75(0.71-0.81)), CHAID (0.76(0.72-0.79)) and C4.5 (0.76(0.73-0.80)). PCC: CART (72(69- 75)), CHAID (72(69-75)) and C4.5 (76(73-79)). Calibration (SMR) better in the CT: CART (1.04(0.95-1.31)), CHAID (1.06(0.97-1.15) and C4.5 (1.08(0.98-1.16)). Conclusion: With different methodologies of CTs, trees are generated with different selection of variables and decision rules. The CTs are easy to interpret, and they stratify the risk of hospital mortality. The CTs should be taken into account for the classification of the prognosis of critically ill patients.
Resumo:
Near-infrared spectroscopy (NIRS) was used to analyse the crude protein content of dried and milled samples of wheat and to discriminate samples according to their stage of growth. A calibration set of 72 samples from three growth stages of wheat (tillering, heading and harvest) and a validation set of 28 samples was collected for this purpose. Principal components analysis (PCA) of the calibration set discriminated groups of samples according to the growth stage of the wheat. Based on these differences, a classification procedure (SIMCA) showed a very accurate classification of the validation set samples : all of them were successfully classified in each group using this procedure when both the residual and the leverage were used in the classification criteria. Looking only at the residuals all the samples were also correctly classified except one of tillering stage that was assigned to both tillering and heading stages. Finally, the determination of the crude protein content of these samples was considered in two ways: building up a global model for all the growth stages, and building up local models for each stage, separately. The best prediction results for crude protein were obtained using a global model for samples in the two first growth stages (tillering and heading), and using a local model for the harvest stage samples.