The Upper Oligocene of Montgat (Catalan Coastal Ranges, Spain): new age constraints to the western Mediterranean Basin opening

The Oligocene deposits of Montgat are integrated in a small outcrop made up of Cenozoic and Mesozoic rocks located in the Garraf-Montnegre horst, close to the major Barcelona fault. The Oligocene of Montgat consists of detrital sediments of continental origin mainly deposited in alluvial fan environments; these deposits are folded and affected by thrusts and strike-slip faults. They can be divided in two lithostratigraphic units separated by a minor southwest-directed thrust: (i) the Turó de Montgat Unit composed of litharenites and lithorudites with high contents of quartz, feldspar, plutonic and limestone rock fragments; and (ii) the Pla de la Concòrdia Unit composed of calcilitharenites and calcilithorudites with high contents of dolosparite and dolomicrite rock fragments. The petrological composition of both units indicates that sediments were derived from the erosion of Triassic (Buntsandstein, Muschelkalk and Keuper facies), Jurassic and Lower Cretaceous rocks (Barremian to Aptian in age). Stratigraphic and petrological data suggest that these units correspond to two coalescent alluvial fans with a source area located northwestwards in the adjoining Collserola and Montnegre inner areas. Micromammal fossils (Archaeomys sp.) found in a mudstone layer of the Pla de la Concòrdia Unit assign a Chattian age (Late Oligocene) to the studied materials. Thus, the Montgat deposits are the youngest dated deposits affected by the contractional deformation that led to the development of the Catalan Intraplate Chain. Taking into account that the oldest syn-rift deposits in the Catalan Coastal Ranges are Aquitanian in age, this allows to precise that the change from a compressive to an extensional regime in this area took place during latest Oligocene-earliest Aquitanian times. This age indicates that the onset of crustal extension related to the opening of the western Mediterranean Basin started in southern France during latest Eocene-early Oligocene and propagated southwestward, affecting the Catalan Coastal Ranges and the northeastern part of the Valencia trough during the latest Chattian-earliest Aquitanian times.

Depositional models of lacustrine evaporites in the SE margin of the Ebro basin (Paleogene, NE Spain)

An important evaporitic sedimentation occurred during the Paleogene (Eocene to lower Oligocene) in the Barberà sector of the southeastern margin of the Tertiary Ebro Basin. This sedimentation took place in shallow lacustrine environments and was controlled by a number of factors: 1) the tectonic structuration of the margin; 2) the high calcium sulphate content in the meteoric waters coming from the marginal reliefs; 3) the semiarid climate; and 4) the development of large alluvial fans along the basin margin, which also conditioned the location of the saline lakes. The evaporites are currently composed of secondary gypsum in surface and anhydrite at depth. There are, however, vestiges of the local presence of sodium sulphates. The evaporite units, with individual thicknesses ranging between 50 and 100 m, are intercalated within various lithostratigraphic formations and exhibit a paleogeographical pattern. The units located closer to the basin margin are characterized by a massive gypsum lithofacies (originally, bioturbated gypsum) bearing chert, and also by meganodular gypsum locally (originally, meganodules of anhydrite) in association with red lutites and clastic intercalations (gypsarenites, sandstones and conglomerates). Chert, which is only linked to the thickest gypsum layers, seems to be an early diagenetic, lacustrine product. Cyclicity in these proximal units indicates the progressive development of lowsalinity, lacustrine bodies on red mud flats. At the top of some cycles, exposure episodes commonly resulted in dissolution, erosion, and the formation of edaphic features. In contrast, the units located in a more distal position with regard to the basin margin are formed by an alternation of banded-nodular gypsum and laminated gypsum layers in association with grey lutites and few clastic intercalations. These distal units formed in saline lakes with a higher ionic concentration. Exposure episodes in these lakes resulted in the formation of synsedimentary anhydrite and sabkha cycles. In some of these units, however, outer rims characterized by a lithofacies association similar to that of the proximal units occur (nodular gypsum, massive gypsum and chert nodules).

Foreword (2004)

This is the first issue of Geologica Acta dedicated to the memory of Professor Francesc Calvet, whose life was cut short in January 2002 when he was only 54. Francesc was a man with great human qualities, a distinguished scientist and an inspiring teacher who was held in high esteem by all those who knew him. His academic achievements, talent and friendly personality attracted numerous colleagues and students. Unfailingly courteous and polite, he was passionately committed to social justice and was a staunch defender of freedom of conscience and tolerance.

Coastal salina evaporites of the Triassic-Liassic boundary in the Iberian Peninsula: the Alacón borehole

The evaporite unit (the Lécera Formation), which was formed at the Triassic¿Liassic boundary in the Aragonian Branch of the Iberian Chain, was studied at the 01 Alacón borehole (Alacón village, Teruel province), where it is mainly constituted by a thick (>e and reflect deeper water settings, whereas in the upper part they correspond to shallower water settings. The evaporite sedimentation mainly occurred in a subsiding coastal basin of the salina or lagoon type. In this setting, the subaqueous precipitation of the carbonate and gypsum lithofacies was followed, in each cycle, by the interstitial growth of anhydrite in exposed conditions. As a whole, the evaporite succession reflects an infilling process. The conversion into anhydrite of the selenitic gypsum -probably also of the rest of depositional gypsum lithofaciesstarted under synsedimentary conditions and followed during shallow to moderate burial diagenesis.

Isotopic characterization of Jurassic evaporites. Aconcagua-Neuquén Basin, Argentina.

1695-6133

Foreword (2007)

This is the second issue of Geologica Acta dedicated to the memory of Professor Francesc Calvet, who passed away in January 2002. Francesc was a man with great human qualities, a distinguished scientist and an inspiring teacher who was held in high esteem by all those who knew him. The first volume contained six papers on specific areas of research in which Francesc was engaged, and a biography (Geologica Acta, volume 2, Nº 4, 2004). This second volume is made up of contributions by colleagues and former students who wish to salute Francesc Calvet as an outstanding geologist and teacher. The papers included in this volume are also subjects in which Francesc was closely involved.

Fifth-order cyclicity and organic matter contents relationship (Lower Eocene, Pyrenees)

The Upper Limestone Member of the Corones Formation of the Spanish Pyrenees consists of various units (Lower and Upper Foraminifera Units, Shale Unit, Cherty-ostracode Unit, Ostracode Unit and Chara-ostracode Unit) and offers strong facies and lateral thickness (20 to 80 m) variations. Detailed facies analyses, fifth-order cycles and organic geochemical determinations in the central domain of the Corones platform carbonates (Cherty-ostracode Unit), lower Eocene in age, were carried out to establish a case of close relationship between variations in organic matter productivity and cyclicity with annual period. The Cherty-ostracode Unit displays a continuous and pervasive fifth-order cyclicity, represented by 5 cycles. Each cycle consists of a lower part (mollusc facies) and an upper part (laminated ostracode facies). The calculated fifth-order cycle period ranges from about 17,000 to 28,000 years, which falls within the Milankovitch Band. Variations in organic matter content related to these carbonate cycles have been established. The lower mollusc facies members show a low organic carbon content and Hydrogen Index (HI) below 0.6% in weight and 261, respectively. By contrast, the upper laminated ostracode facies members show high organic carbon contents (up to 2% in weight) and high HI (between 164 and 373), and are also characterized by important silicification processes (the content in chert is up to 30%). The organic geochemistry resulting from these organic rich levels reflects a contribution of algal marine input.

Siluro-Devonian graptolite stratigraphy of the Catalonian Coastal Ranges

Two facies characterize the Silurian and lower Devonian of the Catalonian Coastal Ranges, namely euxinic and pelagic carbonate facies. The first, is represented by black shales in which the atavus, acinaces, cyphus, triangulatus, convolutus, ?sedgwickii, ellesae and tumescens zones have been recognized. The graptolite succesion is far from complete on present evidence, but this is probably due to unfavorable environmental (taphonomic) conditions. This facies is similar to that prevailing throughout the Iberian massif and most of western Europe. The pelagic carbonate facies is peculiar to the Pridoli and lower Devonian and corresponds to the facies type prevailing in the Western Mediterranean Area. It is characterized by the nodular texture of limestones and marls, with all gradations between nodular limestones, marls and slates. Massive nodular limestone, occur in the lower part of the sequence (La Creu Formation) while the alternation of limestones, marls and slates charaterizes the upper part (Olorda Formation). Orthoconic cephalopds, crinoids, conodonts and tentaculites are the most common fossils present; graptolites occur in some shale horizons in the lower part of the Olorda Formation. These graptolites give strong indications of the uniformis and hercynicus zones (Lochkovian). The uppermost part of the sequence has not provided any graptolite fauna, but according their dacrioconarid fauna it corresponds probably to the Pragian.

Paleozoic stratigraphy of the Central and Northern part of the Catalonian Coastal Ranges (NE Spain)

The Paleozoic stratigraphic succession in the Catalonian Coastal Ranges spans the interval from Cambrian(?) to Carboniferous, with only one break, separating the pre-Carboniferous part of the sequence from the Carboniferous. The oldest rocks exposed form a sequence of schists, fine grained sandstones, gneisses (laminar pre-Hercynian intrusions), marbles, orto- and para-amphibolites and calcsilicate rocks. comparison with other localities iuggests an Early Cambrian age (or perhaps in part older). Upwards the sequence becomes more monotonous andconsists only of schists (or slates where themetamorphic grade is lower) and thin fine-grained sandstone layers (Cambrian-Ordovician). Still higher in the sequence, an altemation of greywackes and slates is found, with interlayered mud-supported conglomerates at its lower part and acid volcanic rocks which occur throughout the whole sequence. This part of the sequence has provided the oldest faunas known in the Catalonian Coastal Ranges, which indicate the Caradoc. Finally, in its uppermost part, the Ordovician sequence contains some thin limestone layers that contain Ashgill faunas. The Silurian, from Llandovery to Lower Ludlow, consists of black graptolitic shales with dolerite sills, whilst the upper Ludlow, Pridolian and Devonian consist of nodular limestones and marls withpelagic and hemipelagic faunas. The youngest Devonian faunas found correspond in general to the Emsian. The existence of a gap at this point of the sequence suggests the possibility that part of the Devonian could have been eroded. The Carboniferous is characterized by a thick culm sequence (Visean to Westphalian?), resting on thin chert and limestone layers (Tournaisian and Visean). A comparison with neighbouring areas shows a similarity regarding succession and facies with other Paleozoic massifs around the Western Mediterranean.

W8 Touch and match

El proyecto Touch & match resolverá la necesidad de una joven empresa del sector de la salud, especializada en el cuidado de nuestros mayores, que pretende crear una plataforma para mejorar la agilidad mental a través de un sencillo juego que permita ir buscando cartas iguales destapándolas de dos en dos.

An overlapping generations approach to price policies in privatehealthcare insurance. The Catalan case

We analyze premium policies and price dispersion among private healthcare insurance firms from an overlapping-generations model. The model shows that firms that apply equal premium to all policyholders and firms that set premiums according to the risk of insured can coexist in the short run, whereas coexistence is unlikely in the long run because it requires the coincidence of economic growth and interest rates. We find support for the model’s results in the Catalan health insurance industry. Keywords: Economic theory, price policies, health insurance, health economics, overlapping-generations. JEL Classifications: I11 / L11 / L23

Producció de biopolímers amb cultius bacterians mixtes. Comparació de tres reactors discontinus seqüencials (SBR) amb diferents condicions operacionals

La producció de biopolímers (polihidroxialcanoats (PHA) i substàncies polimèriques extracel·lulars (EPS)) a nivell industrial, resulta una nova àrea d’investigació que recull diverses disciplines, entre elles les Ciències Ambientals. Aquest projecte final de carrera amb el títol: “Producció de biopolímers amb cultius bacterians mixtes”, s’ha desenvolupat sota la supervisió de la directora de projecte Dra. María Eugenia Suárez Ojeda del Departament d’Enginyeria Química de la Universitat Autònoma de Barcelona (UAB) i s’ha dut a terme per l’estudiant Jordi Pérez i Forner de la Llicenciatura de Ciències Ambientals, Facultat de Ciències de la UAB, en el Departament d’Enginyeria Química de la mateixa universitat. L’objectiu d’aquest projecte ha estat produir biopolímers simultàniament amb l’eliminació de fòsfor i matèria orgànica en aigües residuals per obtenir un residu final amb un alt valor afegit. Aquests biopolímers reuneixen les característiques necessàries per a poder competir amb els plàstics convencionals i així, reduir l’elevat consum del petroli i la generació de residus no biodegradables. En aquest projecte s’ha dut a terme la posta en marxa d’un reactor discontinu seqüencial (SBR) per a l’acumulació de biopolímers amb cultius bacterians mixtes. Diferents investigadors han estudiat que aquests tipus de cultius bacterians arriben a nivells de fins el 53-97% [Pijuan et al., 2009] de contingut de biopolímers a la biomassa, sometent als microorganismes a diferents situacions d’estrés ja sigui per dèficit de nutrients o per variacions en les fases de feast-famine (festí-fam). Durant el projecte, s’ha realitzat el monitoratge del reactor alimentat amb una aigua sintètica, elaborada en el laboratori, amb les característiques d’un aigua residual provinent de la industria làctica. S’ha sotmès als microorganismes a diferents condicions operacionals, una d’elles amb limitació de fòsfor com a nutrient i una tercera condició amb una variació a les fases feast-famine. D’altra banda, com a segon objectiu, s’ha analitzat el contingut de biopolímers a la biomassa de dos SBRs més, del grup de recerca Bio-GLS del Departament d’Enginyeria Química de la UAB, alimentats amb diferents fonts de carboni, glicerol i àcids grassos de cadena llarga (AGCLL), per observar les influències que té el tipus de substrat en l’acumulació de biopolímers. Els resultats obtinguts en la primera part d’aquest projecte han estat similars als resultats d’altres investigadors [Pijuan et al., 2009; Guerrero et al., 2012]. S’ha determinat que sotmetre als microorganismes a situacions d’estrés té un efecte directe pel que fa a l’acumulació de biopolímers. També s’ha observat com al mateix temps que acumulaven aquests compostos, els microorganismes desenvolupaven la seva tasca de depurar l’aigua residual, obtenint al final del cicle una aigua amb un baix contingut en matèria orgànica i altres contaminants com amoni i fòsfor, en aquest cas. En la segona part del projecte, s’ha observat com el tipus de substrat té un efecte directe pel que fa a l’acumulació de biopolímers i també a l’activitat metabòlica dels microorganismes. Per tant, s’ha conclòs que la producció de biopolímers mitjançant la depuració d’aigües residuals es una via d’investigació molt prometedora pel que fa als resultats obtinguts. Alhora que es tracta un residu, s’obté una producte residual amb un alt valor afegit que pot ser utilitzat per la producció de bioplàstics 100% biodegradables.

Anàlisi econòmica financera del sector de càrnies català

Objectiu: Aquest treball pretén reflectir la situació econòmica i financera de les empreses càrnies catalanes en el període 2007-2011, mitjançant l'anàlisi de dades dels seus estats comptables, per tal de diagnosticar la salut empresarial del sector de càrnies catalanes. L'estudi també realitza una anàlisi descriptiva de les entitats que engloben les càrnies catalanes i la posició que ocupen dintre de les indústries agroalimentàries espanyoles, identificant les diferents variables d'anàlisi a curt termini, a llarg termini i d'anàlisi econòmica; afegint a l'anàlisi convencional informacions patrimonials i de tresoreria procedents l'Estat de canvis en el patrimoni net i l'Estat de fluxos d'efectiu. Disseny/metodologia/enfocament: Fer una anàlisis financera a curt termini, a llarg termini, de resultats i dels dos estats nous: Estat de canvis en el patrimoni net i Estat de fluxos d'efectiu sobre una mostra de 130 empreses catalanes utilitzant l'estadística descriptiva oportuna. Resultats: La principal aportació ha estat el diagnòstic d' una bona salut empresarial d'aquestes empreses càrnies en el període analitzat tot i que a partir de l'any 2011 hi ha un canvi en els indicadors financers utilitzats. Limitacions: Seria convenient estendre la mostra i observar en els exercicis posteriors al 2011 si es verifica el canvi de tendència dels indicadors. Implicacions pràctiques: Permet valorar la projecció que ha fet aquest sector d'activitat a Catalunya en el període analitzat.Implicacions socials: Els resultats de l'estudi permet veure la projecció de futur que té aquest sector amb els canvis oportuns a fer. Originalitat/valor afegit: Per les associacions d'indústries càrnies permet fer una valoració de la salut empresarial de les principals empreses associades i per emprendre els reptes de futur oportuns.