Psychometric evaluation of the IWQOL-Lite (Spanish version) when applied to a sample of obese patients awaiting bariatric surgery

Background Obesity may have an impact on key aspects of health-related quality of life (HRQOL). In this context, the Impact of Weight Quality of Life (IWQOL) questionnaire was the first scale designed to assess HRQOL. The aim of the present study was twofold: to assess HRQOL in a sample of Spanish patients awaiting bariatric surgery and to determine the psychometric properties of the IWQOL-Lite and its sensitivity to detect differences in HRQOL across groups. Methods Participants were 109 obese adult patients (BMI¿ 35 kg/m2) from Barcelona, to whom the following measurement instruments were applied: IWQOL-Lite, Depression Anxiety Stress Scales, Brief Symptom Inventory, and self-perception items. Results Descriptive data regarding the IWQOL-Lite scores obtained by these patients are reported. Principal components analysis revealed a five-factor model accounting for 72.05% of the total variance, with factor loadings being adequate for all items. Corrected itemtotal correlations were acceptable for all items. Cronbach"s alpha coefficients were excellent both for the subscales (0.880.93) and the total scale (0.95). The relationship between the IWQOLLite and other variables supports the construct validity of the scale. Finally, sensitivity analysis revealed large effect sizes when comparing scores obtained by extreme BMI groups. Conclusions This is the first study to report the application of the IWQOL-Lite to a sample of Spanish patients awaiting bariatric surgery and to confirm that the Spanish version of the instrument has adequate psychometric properties.

Measurement of the specific heat and determination of the thermodynamic functions of relaxed amorphous silicon

The specific heat, cp, of two amorphous silicon (a-Si) samples has been measured by differential scanning calorimetry in the 100–900K temperature range. When the hydrogen content is reduced by thermal annealing, cp approaches the value of crystalline Si (c-Si). Within experimental accuracy, we conclude that cp of relaxed pure a-Si coincides with that of c-Si. This result is used to determine the enthalpy, entropy, and Gibbs free energy of defect-free relaxed a-Si. Finally, the contribution of structural defects on these quantities is calculated and the melting point of several states of a-Si is predicted

Symptom Check-List-90-R: fiabilidad, datos normativos y estructura factorial en estudiantes universitarios

El Symptom Checklist-90-R (SCL-90-R) es uno de los instrumentos más ampliamente utilizados en la medición de la sintomatología psicopatológica en población clínica y en población general. Ya que gran parte de la investigación en psicopatología se realiza con estudiantes universitarios, este estudio instrumental pretende proporcionar datos de referencia para esta población. Analizamos las propiedades psicométricas de esta escala en una muestra representativa de 1.277 estudiantes de la Universidad de Girona. Las dimensiones con puntuaciones más elevadas para el total de la muestra son Obsesividad-compulsividad, Depresión y Sensibilidad interpersonal. Los resultados muestran diferencias significativas entre hombres y mujeres. La fiabilidad de la escala resulta muy aceptable, con unos coeficientes de consistencia interna de las nueve dimensiones primarias y del GSI, que oscilan entre 0,69 y 0,97. El análisis de la estructura factorial y la fuerte interdependencia entre las escalas primarias cuestionan la multidimensionalidad del SCL-90-R y refuerzan la idea de que el instrumento proporciona una medida de distrés general, es decir, es un indicador unidimensional de malestar psicológico más que una medida de dimensiones psicopatológicas diferenciadas

Incubadores d'empreses: un instrument de suport a l'emprenedoria amb bona salut a Catalunya

The business incubators were newness in Catalonia during the last decade. They proliferated throughout all catalan geography, although during the last three years there have appeared some stabilization signals in the sector. Actually, it has only been created two new business incubators and the existing ones have not increased their supply, neither in physical available space nor in new services. It is observed that the profile of the existing incubators explains the strong presence of service companies. Thus, a clear attempt of specialization of the incubators is detected. At the same time, the virtual incubators and incubators linked to universities are arising new models that could be the paradigm of business incubators from now on

Sistema de indicadores para la gestión sostenible de un destino turístico: aplicación a la Costa Brava centro

Strategic management is based upon a performance measurement system that allows gearing decision making towards accomplishing the established objectives.In a changing economic situation, the measurement of the effects of tourism is fundamental in order to know the efficiency and sustainability of that industry and of the territory in which takes place its activity. We propose a performance measurement system for the sustainable management of a tourism destination, so it will support the adoption of public policies and their follow-up, and as an instrument that will promote the responsible participation of the stakeholders with stakes in the destination. In accordance with the guidelines of the Agenda for a sustainable and competitive European tourism, we design a system based on the identification of the axes over which hinges the success of the management of tourism destinations, taking into account the long-term sustainability of this activity. We position the performance measurement system, and especially the balanced scorecard, as a support tool for the strategic planning of destinations. To the extent that this is possible, the performance measures are selected and structured according to the patterns of the balanced scorecard. Finally, we apply the conceptual model to the central Costa Brava

Optimized back-focal-plane interferometry directly measures forces of optically trapped particles

Back-focal-plane interferometry is used to measure displacements of optically trapped samples with very high spatial and temporal resolution. However, the technique is closely related to a method that measures the rate of change in light momentum. It has long been known that displacements of the interference pattern at the back focal plane may be used to track the optical force directly, provided that a considerable fraction of the light is effectively monitored. Nonetheless, the practical application of this idea has been limited to counter-propagating, low-aperture beams where the accurate momentum measurements are possible. Here, we experimentally show that the connection can be extended to single-beam optical traps. In particular, we show that, in a gradient trap, the calibration product κ·β (where κ is the trap stiffness and 1/β is the position sensitivity) corresponds to the factor that converts detector signals into momentum changes; this factor is uniquely determined by three construction features of the detection instrument and does not depend, therefore, on the specific conditions of the experiment. Then, we find that force measurements obtained from back-focal-plane displacements are in practice not restricted to a linear relationship with position and hence they can be extended outside that regime. Finally, and more importantly, we show that these properties are still recognizable even when the system is not fully optimized for light collection. These results should enable a more general use of back-focal-plane interferometry whenever the ultimate goal is the measurement of the forces exerted by an optical trap.

Optimized back-focal-plane interferometry directly measures forces of optically trapped particles

Back-focal-plane interferometry is used to measure displacements of optically trapped samples with very high spatial and temporal resolution. However, the technique is closely related to a method that measures the rate of change in light momentum. It has long been known that displacements of the interference pattern at the back focal plane may be used to track the optical force directly, provided that a considerable fraction of the light is effectively monitored. Nonetheless, the practical application of this idea has been limited to counter-propagating, low-aperture beams where the accurate momentum measurements are possible. Here, we experimentally show that the connection can be extended to single-beam optical traps. In particular, we show that, in a gradient trap, the calibration product κ·β (where κ is the trap stiffness and 1/β is the position sensitivity) corresponds to the factor that converts detector signals into momentum changes; this factor is uniquely determined by three construction features of the detection instrument and does not depend, therefore, on the specific conditions of the experiment. Then, we find that force measurements obtained from back-focal-plane displacements are in practice not restricted to a linear relationship with position and hence they can be extended outside that regime. Finally, and more importantly, we show that these properties are still recognizable even when the system is not fully optimized for light collection. These results should enable a more general use of back-focal-plane interferometry whenever the ultimate goal is the measurement of the forces exerted by an optical trap.

How we experience immersive virtual environments: the concept of presence and its measurement

This paper reviews the concept of presence in immersive virtual environments, the sense of being there signalled by people acting and responding realistically to virtual situations and events. We argue that presence is a unique phenomenon that must be distinguished from the degree of engagement, involvement in the portrayed environment. We argue that there are three necessary conditions for presence: the (a) consistent low latency sensorimotor loop between sensory data and proprioception; (b) statistical plausibility: images must be statistically plausible in relation to the probability distribution of images over natural scenes. A constraint on this plausibility is the level of immersion;(c) behaviour-response correlations: Presence may be enhanced and maintained over time by appropriate correlations between the state and behaviour of participants and responses within the environment, correlations that show appropriate responses to the activity of the participants. We conclude with a discussion of methods for assessing whether presence occurs, and in particular recommend the approach of comparison with ground truth and give some examples of this.

A two-dimensional doppler-radiometer for earth observation

Compared to synthetic aperture radars (SARs), the angular resolution of microwave radiometers is quite poor. Traditionally, it has been limited by the physical size of the antenna. However, the angular resolution can be improved by means of aperture synthesis interferometric techniques. A narrow beam is synthesized during the image formation processing of the cross-correlations measured at zero-lag between pairs of signals collected by an array of antennas. The angular resolution is then determined by the maximum antenna spacing normalized to the wavelength (baseline). The next step in improving the angular resolution is the Doppler-Radiometer, somehow related to the super-synthesis radiometers and the Radiometer-SAR. This paper presents the concept of a three-antenna Doppler-Radiometer for 2D imaging. The performance of this instrument is evaluated in terms of angular/spatial resolution and radiometric sensitivity, and an L-band illustrative example is presented.

Un instrument per a la política de recerca i innovació a Catalunya en l'Europa del coneixement: el Pla de Recerca i Innovació 2005-2008

El 25 de gener d’enguany el Consell Executiu de la Generalitat va aprovar el Pla de Recerca i Innovació (PRI) 2005-2008. El PRI és un dels principals instruments de la Generalitat per impulsar les activitats de recerca, desenvolupament i innovació en els sectors públic i privat, i per poder assolir l’objectiu d’inversió d’un 2,1% en recerca respecte al producte interior brut català l’any 2008. El PRI ha estat elaborat durant l’any 2004 pel Departament d’Universitats, Recerca i Societat de la Informació, el Departament de Treball i Indústria. El Consell Interdepartamental de Recerca i Innovació Tecnològica, n’ha coordinat l’elaboració, alhora que ha facilitat la col·laboració dels altres departaments de la Generalitat. L’article descriu la importància de la recerca, el desenvolupament i la innovació per al progrés econòmic, social i cultural, en el que ja s’anomena societat o economia del coneixement. Es fa un repàs dels criteris i mecanismes emprats per elaborar el Pla, així com una anàlisi de la situació de la ciència, la innovació i la transferència de coneixements i de tecnologia a Catalunya. Es descriuen a continuació els principals trets d’aquest pla: missió, objectius, programes transversals i complementaris, línies prioritàries, estratègia sectorial. Finalment, es descriuen els disset indicadors genèrics de recerca i innovació que seran emprats pel seu seguiment, juntament amb el pressupost destinat a l’execució del PRI

Innovative LIDAR 3D dynamic measurement system to estimate fruit-tree leaf area

In this work, a LIDAR-based 3D Dynamic Measurement System is presented and evaluated for the geometric characterization of tree crops. Using this measurement system, trees were scanned from two opposing sides to obtain two three-dimensional point clouds. After registration of the point clouds, a simple and easily obtainable parameter is the number of impacts received by the scanned vegetation. The work in this study is based on the hypothesis of the existence of a linear relationship between the number of impacts of the LIDAR sensor laser beam on the vegetation and the tree leaf area. Tests performed under laboratory conditions using an ornamental tree and, subsequently, in a pear tree orchard demonstrate the correct operation of the measurement system presented in this paper. The results from both the laboratory and field tests confirm the initial hypothesis and the 3D Dynamic Measurement System is validated in field operation. This opens the door to new lines of research centred on the geometric characterization of tree crops in the field of agriculture and, more specifically, in precision fruit growing.

Poden ser els pactes successoris un instrument al servei de la continuïtat de l'Empresa Familiar?

En aquest treball es pretén indicar l'existència d'alguns instruments, com són els Pactes Successoris, en aquest cas a Catalunya, que poden ser utilitzats per proporcionar un plus d'estabilitat a un dels reptes fonamentals de les EF, la successió. També es posa l'accent en la introducció de la poda de l'arbre familiar com una opció poc a tenir en compte en la dinàmica pròpia de l'Empresa Familiar.

Disseny i desenvolupament d’un sistema de monitorització en continu de la qualitat de l’aigua de riu

Disseny i muntatge d’un sistema de monitorització a temps real de la qualitat fisico-química de l’aigua en rius mediterranis, que sigui autònom telegestionat i de baix manteniment. Aquest sistema permet realitzar un seguiment de la dinàmica de la qualitat de l’aigua de riu, essent possible detectar episodis d’empitjorament sobtat de la qualitat. El desenvolupament de sensors per mesurar la qualitat de l’aigua en continu ha estat una realitat en la darrera dècada, millorant-ne la robustesa i baixant-ne els costos. Cada instrument cobreix diferents aplicacions dins el cicle de l’aigua, des d’aigües superficials de riu, aigües residuals o aigües potables. Actualment la dificultat no està en la sensorística, sinó en el desenvolupament d’estacions de monitorització autònomes i de baix manteniment

The measurement of ice velocity, mass balance and thinning-rate on Johnsons Glacier, Livingston Island, South Shetland Islands, Antarctica

A network of twenty stakes was set up on Johnsons Glacier in order to determine its dynamics. During the austral summers from 1994-95 to 1997-98, we estimated surface velocities, mass balances and ice thickness variations. Horizontal velocity increased dow nstream from 1 m a- 1 near the ice divides to 40 m a- 1 near the ice terminus. The accumulation zone showed low accumulation rates (maximum of 0,6 m a- 1 (ice)), whereas in the lower part of the glacier, ablation rates were 4,3 m a- 1 (ice). Over the 3-year study period, both in the accumulation and ablation zones, we detected a reduction in the ice surface level ranging from 2 to 10 m from the annual ve rt ical velocities and ice-thinning data, the mass balance was obtained and compared with the mass balance field values, resulting in similar estimates. Flux values were calculated using cross-section data and horizontal velocities, and compared with the results obtained by means of mass balance and ice thinning data using the continuity equation. The two methods gave similar results.