Measurement of the specific heat and determination of the thermodynamic functions of relaxed amorphous silicon

The specific heat, cp, of two amorphous silicon (a-Si) samples has been measured by differential scanning calorimetry in the 100–900K temperature range. When the hydrogen content is reduced by thermal annealing, cp approaches the value of crystalline Si (c-Si). Within experimental accuracy, we conclude that cp of relaxed pure a-Si coincides with that of c-Si. This result is used to determine the enthalpy, entropy, and Gibbs free energy of defect-free relaxed a-Si. Finally, the contribution of structural defects on these quantities is calculated and the melting point of several states of a-Si is predicted

How we experience immersive virtual environments: the concept of presence and its measurement

This paper reviews the concept of presence in immersive virtual environments, the sense of being there signalled by people acting and responding realistically to virtual situations and events. We argue that presence is a unique phenomenon that must be distinguished from the degree of engagement, involvement in the portrayed environment. We argue that there are three necessary conditions for presence: the (a) consistent low latency sensorimotor loop between sensory data and proprioception; (b) statistical plausibility: images must be statistically plausible in relation to the probability distribution of images over natural scenes. A constraint on this plausibility is the level of immersion;(c) behaviour-response correlations: Presence may be enhanced and maintained over time by appropriate correlations between the state and behaviour of participants and responses within the environment, correlations that show appropriate responses to the activity of the participants. We conclude with a discussion of methods for assessing whether presence occurs, and in particular recommend the approach of comparison with ground truth and give some examples of this.

Quantitative developmental response to the length of exposure to long photoperiod in wheat and barley

The present study was designed to analyse the effect of the length of exposure to a long photoperiod imposed c. 3 weeks after sowing in spring wheat (cv. UQ189) and barley (cv. Arapiles) to (i) establish whether the response to the number of cycles of exposure is quantitative or qualitative, (ii) determine the existence of a commitment to particular stages well before the stage has been observable, and (iii) study the interrelationships between the effects on final leaf number and phyllochron when the stimulus is provided several days after seedling emergence. Both wheat and barley seemed to respond quantitatively to the number of long-day cycles they were exposed to. However, wheat showed a requirement of approximately 4 long-day cycles to be able to produce a significant response in time to heading. The barley cultivar used in the study was responsive to the minimum length of exposure. The response to extended photoperiod cycles during the stem elongation phase was due to the ‘ memory’ photoperiod effects being related, in the case of wheat, to the fact that the pre-terminal spikelet appearance phase saturated its photoperiod response well before that stage was reached. Therefore, the commitment to the terminal spikelet appearance in wheat may be reached well before this stage could be recognized. As the response in duration to heading exceeded that of the final leaf number, and the stem elongation phase responded to memory effects of photoperiod, the phyllochron of both cereals was responsive to the treatments accelerating the average phyllochron when exposed to longer periods of long days. The response in average phyllochron was due to a switch from bi-linear to linear models of leaf number v. time when the conditions were increasingly inductive, with the phyllochron of the initial (6–8) leaves being similar for all treatments (within each species), and from then on increased.

Innovative LIDAR 3D dynamic measurement system to estimate fruit-tree leaf area

In this work, a LIDAR-based 3D Dynamic Measurement System is presented and evaluated for the geometric characterization of tree crops. Using this measurement system, trees were scanned from two opposing sides to obtain two three-dimensional point clouds. After registration of the point clouds, a simple and easily obtainable parameter is the number of impacts received by the scanned vegetation. The work in this study is based on the hypothesis of the existence of a linear relationship between the number of impacts of the LIDAR sensor laser beam on the vegetation and the tree leaf area. Tests performed under laboratory conditions using an ornamental tree and, subsequently, in a pear tree orchard demonstrate the correct operation of the measurement system presented in this paper. The results from both the laboratory and field tests confirm the initial hypothesis and the 3D Dynamic Measurement System is validated in field operation. This opens the door to new lines of research centred on the geometric characterization of tree crops in the field of agriculture and, more specifically, in precision fruit growing.

Protein oligomers studied by solid-state NMR the case of the full-length nucleoid-associated protein histone-like nucleoid structuring protein

Members of the histone-like nucleoid structuring protein (H-NS) family play roles both as architectural proteins and as modulators of gene expression in Gram-negative bacteria. The H-NS protein participates in modulatory processes that respond to environmental changes in osmolarity, pH, or temperature. H-NS oligomerization is essential for its activity. Structural models of different truncated forms are available. However, high-resolution structural details of full-length H-NS and its DNA-bound state have largely remained elusive. We report on progress in characterizing the biologically active H-NS oligomers with solid-state NMR. We compared uniformly ((13)C,(15)N)-labeled ssNMR preparations of the isolated N-terminal region (H-NS 1-47) and full-length H-NS (H-NS 1-137). In both cases, we obtained ssNMR spectra of good quality and characteristic of well-folded proteins. Analysis of the results of 2D and 3D (13)C-(13)C and (15)N-(13)C correlation experiments conducted at high magnetic field led to assignments of residues located in different topological regions of the free full-length H-NS. These findings confirm that the structure of the N-terminal dimerization domain is conserved in the oligomeric full-length protein. Small changes in the dimerization interface suggested by localized chemical shift variations between solution and solid-state spectra may be relevant for DNA recoginition.

Scrfl restriction fragment length polymorphism at the D7S23 locus (probe pKM.19), closely linked to cystic fibrosis

Source/Description: pKM.19 is a 1.0 kb EcoRI genomic fragment in pUC13 (ref. 1,2). pPl was isolated independently but contains the same fragment as pKM.19 (ref. 3)...

The measurement of ice velocity, mass balance and thinning-rate on Johnsons Glacier, Livingston Island, South Shetland Islands, Antarctica

A network of twenty stakes was set up on Johnsons Glacier in order to determine its dynamics. During the austral summers from 1994-95 to 1997-98, we estimated surface velocities, mass balances and ice thickness variations. Horizontal velocity increased dow nstream from 1 m a- 1 near the ice divides to 40 m a- 1 near the ice terminus. The accumulation zone showed low accumulation rates (maximum of 0,6 m a- 1 (ice)), whereas in the lower part of the glacier, ablation rates were 4,3 m a- 1 (ice). Over the 3-year study period, both in the accumulation and ablation zones, we detected a reduction in the ice surface level ranging from 2 to 10 m from the annual ve rt ical velocities and ice-thinning data, the mass balance was obtained and compared with the mass balance field values, resulting in similar estimates. Flux values were calculated using cross-section data and horizontal velocities, and compared with the results obtained by means of mass balance and ice thinning data using the continuity equation. The two methods gave similar results.

The role of causal links in performance measurement models

Abstract Purpose: Several well-known managerial accounting performance measurement models rely on causal assumptions. Whilst users of the models express satisfaction and link them with improved organizational performance, academic research, of the realworld applications, shows few reliable statistical associations. This paper provides a discussion on the"problematic" of causality in a performance measurement setting. Design/methodology/approach: This is a conceptual study based on an analysis and synthesis of the literature from managerial accounting, organizational theory, strategic management and social scientific causal modelling. Findings: The analysis indicates that dynamic, complex and uncertain environments may challenge any reliance upon valid causal models. Due to cognitive limitations and judgmental biases, managers may fail to trace correct cause-and-effect understanding of the value creation in their organizations. However, even lacking this validity, causal models can support strategic learning and perform as organizational guides if they are able to mobilize managerial action. Research limitations/implications: Future research should highlight the characteristics necessary for elaboration of convincing and appealing causal models and the social process of their construction. Practical implications: Managers of organizations using causal models should be clear on the purposes of their particular models and their limitations. In particular, difficulties are observed in specifying detailed cause and effect relations and their potential for communicating and directing attention. They should therefore construct their models to suit the particular purpose envisaged. Originality/value: This paper provides an interdisciplinary and holistic view on the issue of causality in managerial accounting models.

Measurement of a Structured Backflow in an Open Small Channel Induced by Surface-Tension Gradients

We present experiments in which the laterally confined flow of a surfactant film driven by controlled surface tension gradients causes the subtended liquid layer to self-organize into an inner upstream microduct surrounded by the downstream flow. The anomalous interfacial flow profiles and the concomitant backflow are a result of the feedback between two-dimensional and three-dimensional microfluidics realized during flow in open microchannels. Bulk and surface particle image velocimetry data combined with an interfacial hydrodynamics model explain the dependence of the observed phenomena on channel geometry.

The Total Deviation Index estimated by Tolerance Intervals to evaluate the concordance of measurement devices

Background In an agreement assay, it is of interest to evaluate the degree of agreement between the different methods (devices, instruments or observers) used to measure the same characteristic. We propose in this study a technical simplification for inference about the total deviation index (TDI) estimate to assess agreement between two devices of normally-distributed measurements and describe its utility to evaluate inter- and intra-rater agreement if more than one reading per subject is available for each device. Methods We propose to estimate the TDI by constructing a probability interval of the difference in paired measurements between devices, and thereafter, we derive a tolerance interval (TI) procedure as a natural way to make inferences about probability limit estimates. We also describe how the proposed method can be used to compute bounds of the coverage probability. Results The approach is illustrated in a real case example where the agreement between two instruments, a handle mercury sphygmomanometer device and an OMRON 711 automatic device, is assessed in a sample of 384 subjects where measures of systolic blood pressure were taken twice by each device. A simulation study procedure is implemented to evaluate and compare the accuracy of the approach to two already established methods, showing that the TI approximation produces accurate empirical confidence levels which are reasonably close to the nominal confidence level. Conclusions The method proposed is straightforward since the TDI estimate is derived directly from a probability interval of a normally-distributed variable in its original scale, without further transformations. Thereafter, a natural way of making inferences about this estimate is to derive the appropriate TI. Constructions of TI based on normal populations are implemented in most standard statistical packages, thus making it simpler for any practitioner to implement our proposal to assess agreement.

How we experience immersive virtual environments: the concept of presence and its measurement

This paper reviews the concept of presence in immersive virtual environments, the sense of being there signalled by people acting and responding realistically to virtual situations and events. We argue that presence is a unique phenomenon that must be distinguished from the degree of engagement, involvement in the portrayed environment. We argue that there are three necessary conditions for presence: the (a) consistent low latency sensorimotor loop between sensory data and proprioception; (b) statistical plausibility: images must be statistically plausible in relation to the probability distribution of images over natural scenes. A constraint on this plausibility is the level of immersion;(c) behaviour-response correlations: Presence may be enhanced and maintained over time by appropriate correlations between the state and behaviour of participants and responses within the environment, correlations that show appropriate responses to the activity of the participants. We conclude with a discussion of methods for assessing whether presence occurs, and in particular recommend the approach of comparison with ground truth and give some examples of this.

Reversal of a full-length mutant huntingtin neuronal cell phenotypeby chemical inhibitors of polyglutamine-mediated aggregation

Background: Huntington's disease (HD) is an inherited neurodegenerative disorder triggered by an expanded polyglutamine tract in huntingtin that is thought to confer a new conformational property on this large protein. The propensity of small amino-terminal fragments with mutant, but not wild-type, glutamine tracts to self-aggregate is consistent with an altered conformation but such fragments occur relatively late in the disease process in human patients and mouse models expressing full-length mutant protein. This suggests that the altered conformational property may act within the full-length mutant huntingtin to initially trigger pathogenesis. Indeed, genotypephenotype studies in HD have defined genetic criteria for the disease initiating mechanism, and these are all fulfilled by phenotypes associated with expression of full-length mutant huntingtin, but not amino-terminal fragment, in mouse models. As the in vitro aggregation of amino-terminal mutant huntingtin fragment offers a ready assay to identify small compounds that interfere with the conformation of the polyglutamine tract, we have identified a number of aggregation inhibitors, and tested whether these are also capable of reversing a phenotype caused by endogenous expressionof mutant huntingtin in a striatal cell line from the HdhQ111/Q111 knock-in mouse. Results: We screened the NINDS Custom Collection of 1,040 FDA approved drugs and bioactive compounds for their ability to prevent in vitro aggregation of Q58-htn 1¿171 amino terminal fragment. Ten compounds were identified that inhibited aggregation with IC50 < 15 ¿M, including gossypol, gambogic acid, juglone, celastrol, sanguinarine and anthralin. Of these, both juglone and celastrol were effective in reversing the abnormal cellular localization of full-length mutant huntingtin observed in mutant HdhQ111/Q111 striatal cells. Conclusions: At least some compounds identified as aggregation inhibitors also prevent a neuronal cellular phenotype caused by full-length mutant huntingtin, suggesting that in vitro fragment aggregation can act as a proxy for monitoring the disease-producing conformational property in HD. Thus, identification and testing of compounds that alter in vitro aggregation is a viable approach for defining potential therapeutic compounds that may act on the deleterious conformational property of full-length mutant huntingtin.

Measurement of the relative rate of prompt χ c0, χ c1 and χ c2 production at TeV

Prompt production of charmonium χ c0, χ c1 and χ c2 mesons is studied using proton-proton collisions at the LHC at a centre-of-mass energy of TeX TeV. The χ c mesons are identified through their decay to J/ψγ, with J/ψ → μ + μ − using photons that converted in the detector. A data sample, corresponding to an integrated luminosity of 1.0 fb−1 collected by the LHCb detector, is used to measure the relative prompt production rate of χ c1 and χ c2 in the rapidity range 2.0 < y < 4.5 as a function of the J/ψ transverse momentum from 3 to 20 GeV/c. First evidence for χ c0 meson production at a high-energy hadron collider is also presented.

Comparing assays for the measurement of AhR ligand activity

In this thesis (TFG) the results of the comparison of three assays for the measurement of AhR ligand activity are exposed. This study was part of a collaborative project aiming at the characterization of the AhR signaling activities of known naturally occurring compounds to explore the potential of using non-toxic compounds to treat inflammatory diseases via oral administration. The first goal of this project was to find an assay able to measure AhR-activity, so the comparison of different assays has been done in order to find the most convenient one according to the efficiency, sensitivity and precision. Moreover, other elements with operational nature such as price, toxicity of components or ease of use has been considered. From the use of compounds known from the literature to be AhR ligands, three assays have been tested: (1) P450-GloTM CYP1A2 Induction/Inhibition assay, (2) quantitative Polymerase Chain Reaction (qPCR) and (3) DR. CALUX® Bioassay. Moreover, a different experiment using the last assay was performed for the study in vivo of the transport of the compounds tested. The results of the TFG suggested the DR. CALUX® Bioassay as the most promising assay to be used for the screening of samples as AhR-ligands because it is quicker, easier to handle and less expensive than qPCR and more reproducible than the CYP1A2 Induction/Inhibition assay. Moreover, the use of this assay allowed having a first idea of which compounds are uptaken by the epithelial barrier and in with direction the transport happens.

The use of cost per life year gained as a measurement of cost-effectiveness in Spain: a systematic review of recent publications

The objective of this study was to evaluate the methodological characteristics of cost-effectiveness evaluations carried out in Spain, since 1990, which include LYG as an outcome to measure the incremental cost-effectiveness ratio. METHODS: A systematic review of published studies was conducted describing their characteristics and methodological quality. We analyse the cost per LYG results in relation with a commonly accepted Spanish cost-effectiveness threshold and the possible relation with the cost per quality adjusted life year (QALY) gained when they both were calculated for the same economic evaluation. RESULTS: A total of 62 economic evaluations fulfilled the selection criteria, 24 of them including the cost per QALY gained result as well. The methodological quality of the studies was good (55%) or very good (26%). A total of 124 cost per LYG results were obtained with a mean ratio of 49,529 and a median of 11,490 (standard deviation of 183,080). Since 2003, a commonly accepted Spanish threshold has been referenced by 66% of studies. A significant correlation was found between the cost per LYG and cost per QALY gained results (0.89 Spearman-Rho, 0.91 Pearson). CONCLUSIONS: There is an increasing interest for economic health care evaluations in Spain, and the quality of the studies is also improving. Although a commonly accepted threshold exists, further information is needed for decision-making as well as to identify the relationship between the costs per LYG and per QALY gained.