Influence of Assisted Reproductive Techniques in the occurrence of weight discordance in twin gestations

Background:There is no actual evidence that the ART are directly related to the occurrence of weight discordance. In some studies, ART-­‐conceived twin pregnancies are at greater risk than non-­‐ART-­‐conceived ones for pregnancy complications and adverse perinatal outcome: the incidences of pregnancy-­‐induced hypertension, uterine bleeding, premature contractions, IUGR, fetal death, discordance, and cesarean section were significantly higher. Discordance rate was elevated (25.3% vs.17.0%) among ART twins, which can increase perinatal risk (increased incidence of SGA and NICU admission). Other studies say that perinatal and neonatal morbidity, gestational age at delivery, and birth weight are not affected by ART. Regarding the first trimester ultrasound, some studies didn’t notice significant differences in CRL disparity or birth weight discordance between spontaneous and ART-­‐ conceived dichorionic twin pregnancies. In ART-­‐conceived dichorionic twin pregnancies, CRL disparity may be associated with birth weight discordance. In some studies, CRL discordance in twin pregnancies in the first trimester was a frequent finding. Objectives: To analyze the association of the ART in the occurrence of weight discordance in the pregnancies between 2010 and 2013 in the Hospital Universitari de Girona Doctor Josep Trueta, and to describe the proportion of diagnosis of growth discordance in the first trimester by the ultrasonography technology. Methods: A retrospective cohort study will be performed in those patients with twin pregnancies between 2010 and 2013, within the Hospital Universitari de Girona Doctor Josep Trueta (HUJT). A retrospective and descriptive study will be done in those cases with discordance weight in the moment of the birth, in which the CRL will be studied in the first trimester ultrasound, describing the percentage of discordance detected in that moment. The general characteristics of the sample are going to be analyzed by Logistic RegressionInfluenceof

Effect of Tocopherol Extract, Staphylococcus carnosus Culture, and Celery Concentrate Addition on Quality Parameters of Organic and Conventional Dry-Cured Sausages

The effects of the addition to sausage mix of tocopherols (200 mg/kg), a conventional starter culture with or without Staphylococcus carnosus, celery concentrate (CP) (0.23% and 0.46%), and two doses of nitrate (70 and 140 mg/kg expressed as NaNO(3)) on residual nitrate and nitrite amounts, instrumental CIE Lab color, tocol content, oxidative stability, and overall acceptability were studied in fermented dry-cured sausages after ripening and after storage. Nitrate doses were provided by nitrate-rich CP or a chemical grade source. The lower dose complies with the EU requirements governing the maximum for ingoing amounts in organic meat products. Tocopherol addition protected against oxidation, whereas the nitrate dose, nitrate source, or starter culture had little influence on secondary oxidation values. The residual nitrate and nitrite amounts found in the sausages with the lower nitrate dose were within EU-permitted limits for organic meat products and residual nitrate can be further reduced by the presence of the S. carnosus culture. Color measurements were not affected by the CP dose. Product consumer acceptability was not affected negatively by any of the factors studied. As the two nitrate sources behaved similarly for the parameters studied, CP is a useful alternative to chemical ingredients for organic dry-cured sausage production.

Reproductive morphology in Mediterranean Seirospora giraudyi (Ceramiales, Rhodophyta)

This paper presents a detailed description of the reproductive characters of Mediterranean Seirospora giraudyi based on fresh material collected in the northwestern coast of Spain. Vegetative cells are uninucleate. The plant is monoecious. Spermantangial parent’s cells are clustered on modified dwarf determinate filaments, usually situated on adaxial surfaces of branches. One to four spermatia are formed by elongation and proximal divisions of the spermatangial parent cells. Spermatium with a nucleus situated ina mec. The thallus is procarpic. The four-celled carpogonial branch is initially L-shaped, and it is situated on a periaxial supporting fertile axial cell. The mature carpogonial branch is U-shaped and the supporting cell and second periaxial cell enlarge and divide transversely to reproduce a pair uninicleate auxiliary cell. The nucleus in the ferlilized carpogonium divides twice and the carpogonium cleaves vertically into two cells that, turn, cut off a pair of uninucleate connecting cells that fuse with the auxiliary cells on opposite sides; the diploid nuclei in the connecting cells divide at the site of fusion and one of the nuclei enters the auxiliary cell white the other is extruded. Each auxiliary cell gives to a terminal primary gonimolobe initials. Gonimolobes form lax chains of carposporangia. As the gonimoblasts mature, both lobes of the foot cell which is situated on the supporting cell elongate the upper one secondary connecting with the supporting cell, and the lower one with the fertile axial cell. The gonimoblasts are subtended at maturity by one to several clusters of involucral flaments. Seirospora is currently placed in the tribe Euptiloteae; however the reproductive character of S.giraudyi is dentical to those described for the Cañllithamnieae. Molecular studies are needed to confirm the taxonomic position of S.giraudyi as well as that of the other species placed Seirospora

The reproductive cycle of the sea urchin Arbacia lixula in northwest mediterranean: potential influence of temperature and photoperiod

We studied the reproductive cycle of the sea urchin Arbacia lixula in a subtidal population from northeast Spain over four years using a gonadosomatic index (GSI) and gonad histology. Our results show that the GSI of A. lixula follows a seasonal cycle which peaks in May-July and attains its lowest values in October-November every year. The time course of the GSI matched closely the photoperiod cycle. We also found a remarkable inter-annual variability in the maximum value of GSI, which correlated with mean water temperature during the gonad growth period (winter and spring). Gonad histology was also in agreement with a single gametogenic cycle per year in this species. We explored the application of circular statistics to present and analyse gonadal development data, which allowed us to adequately handle the high intra-individual variability detected, with several developmental stages commonly found within the same gonad. The picture that emerged is one of a gametogenic timing driven by photoperiod, while the amount of reproductive output is determined by temperature. This is coherent with the tropical origin of the species and lends support to recent warnings about an increase in the abundance of this species in the Mediterranean as a result of global warming, with associated increased impact potential in sublittoral communities.

Minimal requirements for parameters to be used for the development of predictive models for microbial source tracking. The example of the pair somatic coliphages and phages infecting Bacteroides

Several methods and approaches for measuring parameters to determine fecal sources of pollution in water have been developed in recent years. No single microbial or chemical parameter has proved sufficient to determine the source of fecal pollution. Combinations of parameters involving at least one discriminating indicator and one universal fecal indicator offer the most promising solutions for qualitative and quantitative analyses. The universal (nondiscriminating) fecal indicator provides quantitative information regarding the fecal load. The discriminating indicator contributes to the identification of a specific source. The relative values of the parameters derived from both kinds of indicators could provide information regarding the contribution to the total fecal load from each origin. It is also essential that both parameters characteristically persist in the environment for similar periods. Numerical analysis, such as inductive learning methods, could be used to select the most suitable and the lowest number of parameters to develop predictive models. These combinations of parameters provide information on factors affecting the models, such as dilution, specific types of animal source, persistence of microbial tracers, and complex mixtures from different sources. The combined use of the enumeration of somatic coliphages and the enumeration of Bacteroides-phages using different host specific strains (one from humans and another from pigs), both selected using the suggested approach, provides a feasible model for quantitative and qualitative analyses of fecal source identification.

Spain, Economic Crisis, and the New Enclosure of the Reproductive Commons

In the past f ew years numerous authors have examined how the current economic crisis in Spain has dif f erential impacts on women and men.1 While this is important to show, this article’s goal is to make the leap f rom a mere description of the gendered effects of the crisis, to an analysis of some of the very gendered processes that shape it at its core. In other words, the intent is to understand how both the crisis itself and the ways the state manages it are structurally shaped by gender.

Assessment of the levels of degradation in fat co- and by-products for feed uses and their relationships with some lipid composition parameters

This paper discusses the levels of degradation of some co- and byproducts of the food chain intended for feed uses. As the first part of a research project, 'Feeding Fats Safety', financed by the sixth Framework Programme-EC, a total of 123 samples were collected from 10 European countries, corresponding to fat co- and byproducts such as animal fats, fish oils, acid oils from refining, recycled cooking oils, and other. Several composition and degradation parameters (moisture, acid value, diacylglycerols and monoacylglycerols, peroxides, secondary oxidation products, polymers of triacylglycerols, fatty acid composition, tocopherols, and tocotrienols) were evaluated. These findings led to the conclusion that some fat by- and coproducts, such as fish oils, lecithins, and acid oils, show poor, nonstandardized quality and that production processes need to be greatly improved. Conclusions are also put forward about the applicability and utility of each analytical parameter for characterization and quality control.

Life-time growth patterns of pumpkinseed Lepomis gibbosus introduced to Europe, relative to North American populations

The pumpkinseed Lepomis gibbosus, an omnivorous, nest guarding North American sunfish, was introduced into European waters about 100 years ago. To assess growth performance following introduction, we reviewed the available data for North American and European populations of pumpkinseed and compared the back-calculated age-specific growth for juveniles (standard length, SL, at age two) and adults (age two to five increment) as well as adult body size (SL at age five), von Bertalanffy growth model parameters and the index of growth (in length) performance (φ′). For continental comparisons of growth trajectory, mean growth curves for North American and Europe were calculated with the von Bertalanffy model using pooled data sets for each continent. Juvenile growth rate did not differ between European and North American pumpkinseed, but mean adult body size and adult growth rate were both significantly greater in North American than European populations. Adult body size decreased with increasing latitude (ANOVA) in North American populations, but this was not observed with adult growth rate. In contrast, adult body size tended to increase with latitude in European populations. Adult body size correlated significantly with φ′. The von Bertalanffy model described the overall growth patterns of North American and European populations reasonably well, but on the individual population level, length asymptotes were unrealistic (estimates that were > 20 % of the mean back-calculated size for the oldest age class) for a third of European populations and 80% of the North American populations. In contrast to North American pumpkinseed populations, somatic growth in European populations appears to be compromised by limited, but adequate, food resources, probably due to strong intraspecific interactions. This appears to be especially acute in adults, having potential ramifications for life span and reproductive allocation

The reproductive cycle of Ophichthus rufus (Pisces: Anguilliformes) in the NW Mediterranean

The reproductive biology of the Mediterranean Snake cel, Ophichthus Rufus (Ophichthidae), was studied on the basis of microscopic and macroscopic analysis. Results show that O.rufus is an oviparous species with a group synchronous ovary type. The maturation process of the gonads starts in December and progress until August, when ovulation and a pawing take place. It is a fractional spawned with buoyant eggs. Potential annual fecundity estimates ranged from 1426 to 23.605 oocytes. Except for small sizes, a clear predominance of females was observed

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders

Vegetative and reproductive morphology of Kallymenia patens (Kallymeniaceae, Rhodophyta) in the Mediterranean Sea

Reproductive morphology of the Mediterranean red alga Kallymenia patens is described for the first time, confirming its position in the genus. K. patens is characterized by a non-procarpic female reproductive apparatus, carpogonial branch systems consisting of supporting cells bearing both three-celled carpogonial branches and subsidiary cells that lack a hypogynous cell and carpogonium; fusion cells develop numerous connecting filaments, and tetrasporangia are scattered over the thallus and are probably cruciately divided. Old fertile spathulate specimens of K. patens are morphologically similar to K. spathulata, but they can be distinguished by the length of spathulated proliferations (up to 0.6 cm and 6 cm, respectively), the length of inner cortical cells (up to 70 and 30 μm, respectively), and the gonimoblast location (in proliferations from the perennial part of the blade and over all the thallus surface, respectively)

The morphology and reproductive structures of Mediterranean species of the genus Nemastoma J. Agardh, nom. cons. (Nemastomataceae, Nemastomatales): Nemastoma dichotomum and N. dumontioides

The morphology and reproductive structures of Mediterranean species of the genus Nemastoma J. Agardh, nom. cons. (Nemastomataceae, Nemastomatales): Nemastoma dichotomum and N. dumontioides

Swarm Intelligent Selection and Optimization of Machining System Parameters for Microchannel Fabrication in Medical Devices

Current technology trends in medical device industry calls for fabrication of massive arrays of microfeatures such as microchannels on to nonsilicon material substrates with high accuracy, superior precision, and high throughput. Microchannels are typical features used in medical devices for medication dosing into the human body, analyzing DNA arrays or cell cultures. In this study, the capabilities of machining systems for micro-end milling have been evaluated by conducting experiments, regression modeling, and response surface methodology. In machining experiments by using micromilling, arrays of microchannels are fabricated on aluminium and titanium plates, and the feature size and accuracy (width and depth) and surface roughness are measured. Multicriteria decision making for material and process parameters selection for desired accuracy is investigated by using particle swarm optimization (PSO) method, which is an evolutionary computation method inspired by genetic algorithms (GA). Appropriate regression models are utilized within the PSO and optimum selection of micromilling parameters; microchannel feature accuracy and surface roughness are performed. An analysis for optimal micromachining parameters in decision variable space is also conducted. This study demonstrates the advantages of evolutionary computing algorithms in micromilling decision making and process optimization investigations and can be expanded to other applications

Geographical Distribution, Habitat and Reproductive Phenology of the Genus Kallymenia (Gigartinales, Rhodophyta) from Catalonia, Spain

Geographical distribution, habitat and reproductive phenology of the Genus Kallymenia (Gigartinales, Rhodophyta) from Catalonia, Spain

Health and reproduction of red mullet, Mullus barbatus, in the western Mediterranean Sea

The reproductive and general health of exploited fish stocks is an essential element of sustainable and profitable fisheries. The main purpose of this study was to assess the relationships between reproduction and two important parameters of fish health (parasitism and energy reserves) in female specimens of red mullet, Mullus barbatus, from the western Mediterranean Sea. We present new data for this species on (i) the prevalence and intensity of infection by metazoan parasites; (ii) the total lipid content in muscle and gonads as a measure of condition and (iii) fecundity and egg quality as a measure of their reproductive capacity. The results show that M. barbatus is a batch spawner with an income breeding strategy, an asynchronous development of oocytes and indeterminate fecundity. The results also indicate that the three most abundant and prevalent parasites significantly affect the condition and reproduction of M. barbatus. Specifically, the digenean, Opecoeloides furcatus, causes a reduction in the female"s energy reserves, while the nematodes, Hysterothylacium fabri and H. aduncum, produce a rise in egg production but impair egg quality. These implications of the relationships between parasitism, fish health and fish reproduction should be taken into consideration in the assessment and management of exploited species