The Upper Oligocene of Montgat (Catalan Coastal Ranges, Spain): new age constraints to the western Mediterranean Basin opening

The Oligocene deposits of Montgat are integrated in a small outcrop made up of Cenozoic and Mesozoic rocks located in the Garraf-Montnegre horst, close to the major Barcelona fault. The Oligocene of Montgat consists of detrital sediments of continental origin mainly deposited in alluvial fan environments; these deposits are folded and affected by thrusts and strike-slip faults. They can be divided in two lithostratigraphic units separated by a minor southwest-directed thrust: (i) the Turó de Montgat Unit composed of litharenites and lithorudites with high contents of quartz, feldspar, plutonic and limestone rock fragments; and (ii) the Pla de la Concòrdia Unit composed of calcilitharenites and calcilithorudites with high contents of dolosparite and dolomicrite rock fragments. The petrological composition of both units indicates that sediments were derived from the erosion of Triassic (Buntsandstein, Muschelkalk and Keuper facies), Jurassic and Lower Cretaceous rocks (Barremian to Aptian in age). Stratigraphic and petrological data suggest that these units correspond to two coalescent alluvial fans with a source area located northwestwards in the adjoining Collserola and Montnegre inner areas. Micromammal fossils (Archaeomys sp.) found in a mudstone layer of the Pla de la Concòrdia Unit assign a Chattian age (Late Oligocene) to the studied materials. Thus, the Montgat deposits are the youngest dated deposits affected by the contractional deformation that led to the development of the Catalan Intraplate Chain. Taking into account that the oldest syn-rift deposits in the Catalan Coastal Ranges are Aquitanian in age, this allows to precise that the change from a compressive to an extensional regime in this area took place during latest Oligocene-earliest Aquitanian times. This age indicates that the onset of crustal extension related to the opening of the western Mediterranean Basin started in southern France during latest Eocene-early Oligocene and propagated southwestward, affecting the Catalan Coastal Ranges and the northeastern part of the Valencia trough during the latest Chattian-earliest Aquitanian times.

Magmatismo paleozoico en el Macizo del Roc de Frausa (Pirineos Orientales)

En el Macizo del Roc de Frausa se han diferenciado mediante criterios geoquímicos dos tipos diferentes de anfibolitas. El primer tipo lo forman metabasitas de afinidad toleitica y composición próxima a los E-MOIIB. Proceden de magmas poco evolucionados moderadamente bajos en potasio. Forman sills intercalados entre los metasedimentos cambro-ordovícicos y están asociadas a porfiroides gneísicos. Los porfiroides gneisicos representan términos ácidos subaluminicos de carácter explosivo y afinidad calcoalcalina con un contenido medio en potasio. Su relación genética con las metabasitas es poco clara; se interpretan como diferenciados ácidos de estas con una importante mezcla de material cortical. Se sugiere para este magmatismo un ámbito geodinámico continental fini-compresivo en relación con cucncas marginales.

The Hercynian structure of the Catalonian Coastal Ranges (NE Spain)

In the Catalonian Coastal Ranges, Paleozoic sedimentary and meta-sedimentary rocks crop out in severa1 areas, intruded by late tectonic Hercynian granitoids and separated by Mesozoic and Tertiary cover sediments. Large structures are often difficult to recognize, although a general east-west trend can be observed on the geological map. Deformation was accompanied by the development of cleavages and regional metamorphism. Green-schist facies rocks are prominent throughout the Ranges, while amphibolite facies are restricted to small areas. In low-grade areas, the main deformation phase generated south-facing folds with an axial plane cleavage (slaty cleavage in metapelitic rocks). The intersection lineation (Ss/Sl) and the axes of minor folds trend cast-west, as do all mapable structures. Late deformations generated coarse crenulations, small chevrons and kink-bands, all intersecting the slaty cleavage at high angles. In medium- to high-grade areas no major folds have been observed. In these areas, the main foliation is a schistosity and is often folded, giving centimetric to decimetric, nearly isoclinal intrafolial folds. In schists, these folds aremuchmore common than inother lithologies, and can be associated with a crenulation cleavage. All these planar structures in high-grade rocks are roughly parallel. The late Hercynian deformational events, which gave rise to the crenulations and small chevrons, also produced large (often kilometric) open folds which fold the slaty cleavage and schistosity. As aconsequence, alternating belts with opposite dip (north and south) of the main foliation were formed. With respect to the Hercynian orogenic belt, the Paleozoic outcrops of the Catalonian Coastal Ranges are located within the northern branch of the Ibero-Armorican arc, and have a relatively frontal position within the belt. The Carboniferous of the Priorat-Prades area, together with other outcrops in the Castellón Province, the Montalbán massif (Iberian Chain) and the Cantabrian zone (specially the Pisuerga-Carrión Province) probably form part of a wide area of foreland Carboniferous deposition placed at the core of the arc.

Contingut de matèria orgànica al sòl segons els usos forestals a les Gavarres (Girona)

El següent article és un estudi sobre el contingut de matèria orgànica als sòls del massís de les Gavarres tenint en compte dos aspectes, el primer segons sigui la litologia i segon el tipus d'ús del sòl. Per això s'ha dividit el massís entre els dos grans components litològics: granits i pissarres. A la vegada s'han estudiat els usos del sòl més representatius d'aquesta muntanya: la sureda estassada, la sureda abandonada, les plantacions de pins, les plantacions d'eucaliptus i un bosc mixt de pins i suros. Els resultats mostren que el contingut de matèria orgànica pel que fa a la litologia és molt més alt als sòls sobre pissarres. Quant als usos del sòl, el major contingut correspon a les suredes i el menor a les plantacions d'eucaliptus.

Geology of the Cerro-Quema Au-Cu deposit (Azuero Peninsula, Panama)

The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a CretaceousPaleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late CretaceousOligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.

Deep incision in an Aptian carbonate succession indicates major sea-level fall in the Cretaceous

Long-term relative sea-level cycles (0 5 to 6 Myr) have yet to be fully understood for the Cretaceous. During the Aptian, in the northern Maestrat Basin (Eastern Iberian Peninsula), fault-controlled subsidence created depositional space, but eustasy governed changes in depositional trends. Relative sea-level history was reconstructed by sequence stratigraphic analysis. Two forced regressive stages of relative sea-level were recognized within three depositional sequences. The first stage is late Early Aptian age (intra Dufrenoyia furcata Zone) and is characterized by foreshore to upper shoreface sedimentary wedges, which occur detached from a highstand carbonate platform, and were deposited above basin marls. The amplitude of relative sea-level drop was in the order of tens of metres, with a duration of <1 Myr. The second stage of relative sea-level fall occurred within the Late Aptian and is recorded by an incised valley that, when restored to its pre-contractional attitude, was >2 km wide and cut 115 m down into the underlying Aptian succession. With the subsequent transgression, the incision was back-filled with peritidal to shallow subtidal deposits. The changes in depositional trends, lithofacies evolution and geometric relation of the stratigraphic units characterized are similar to those observed in coeval rocks within the Maestrat Basin, as well as in other correlative basins elsewhere. The pace and magnitude of the two relative sea-level drops identified fall within the glacio-eustatic domain. In the Maestrat Basin, terrestrial palynological studies provide evidence that the late Early and Late Aptian climate was cooler than the earliest part of the Early Aptian and the Albian Stage, which were characterized by warmer environmental conditions. The outcrops documented here are significant because they preserve the results of Aptian long-term sea-level trends that are often only recognizable on larger scales (i.e. seismic) such as for the Arabian Plate.

Deep incision in an Aptian carbonate succession indicates major sea-level fall in the Cretaceous

Long-term relative sea-level cycles (0 5 to 6 Myr) have yet to be fully understood for the Cretaceous. During the Aptian, in the northern Maestrat Basin (Eastern Iberian Peninsula), fault-controlled subsidence created depositional space, but eustasy governed changes in depositional trends. Relative sea-level history was reconstructed by sequence stratigraphic analysis. Two forced regressive stages of relative sea-level were recognized within three depositional sequences. The first stage is late Early Aptian age (intra Dufrenoyia furcata Zone) and is characterized by foreshore to upper shoreface sedimentary wedges, which occur detached from a highstand carbonate platform, and were deposited above basin marls. The amplitude of relative sea-level drop was in the order of tens of metres, with a duration of <1 Myr. The second stage of relative sea-level fall occurred within the Late Aptian and is recorded by an incised valley that, when restored to its pre-contractional attitude, was >2 km wide and cut 115 m down into the underlying Aptian succession. With the subsequent transgression, the incision was back-filled with peritidal to shallow subtidal deposits. The changes in depositional trends, lithofacies evolution and geometric relation of the stratigraphic units characterized are similar to those observed in coeval rocks within the Maestrat Basin, as well as in other correlative basins elsewhere. The pace and magnitude of the two relative sea-level drops identified fall within the glacio-eustatic domain. In the Maestrat Basin, terrestrial palynological studies provide evidence that the late Early and Late Aptian climate was cooler than the earliest part of the Early Aptian and the Albian Stage, which were characterized by warmer environmental conditions. The outcrops documented here are significant because they preserve the results of Aptian long-term sea-level trends that are often only recognizable on larger scales (i.e. seismic) such as for the Arabian Plate.

Autoecología de los hayedos catalanes

Este estudio está basado en el muestreo de campo y posterior análisis de 24 parcelas de hayedo seleccionadas mediante una estratificación de su área de distribución basada en la clasificación CLATERES de la Ecorregión Catalano-Aragonesa. En cada parcela se han evaluado 3 parámetros fisiográficos, 15 climáticos y 18 edáficos, a partir de los cuales se han establecido sus valores paramétricos centrales y marginales que permiten definir los hábitats fisiográfico, climático y edáfico de las masas de Fagus sylvatica L. en Cataluña. Los hayedos catalanes se presentan sobre substratos litológicos muy diversos (plutonitas, vulcanitas, metamorfitas y sedimentitas, tanto ácidas como básicas), con texturas predominantes francas, franco-arenosas o franco-limosas. Los suelos, según FAO, son mayoritariamente cambisoles. A pesar de que la capacidad de retención de agua de sus suelos es escasa, la sequía fisiológica es reducida. Los humus predominantemente pertenecen a los tipos mull forestal y mull cálcico. Además, se presentan una serie de parámetros selvícolas ( Densidad de pies y densidad de chirpiales, Area basimétrica, Altura Total dominante, Índices de Hart-Becking, Índice de Calidad de Estación y Edad de la masa) que al correlacionarlos con los ecológicos nos ha permitido comprobar que los mejores hayedos se encuentran en las localizaciones más térmicas, en las que incluso se podría producir sequía fisiológica si no fuera por que existen suficientes precipitaciones estivales.

Aportació al coneixement de l'evolució geològica recent de la plana del Ter (Baix Empordà)

The infilling of the river Ter Plain was produced by alluvial systems under the control of sea-level changes during the Quaternary. This paper describes the sedimentary evolution of the plain, and attemps to present a chronology of the recent geological events based on eustatic curves

Estructura y relleno sedimentario de la semifosa neógena de Vilanova (Garraf, Barcelona)

En el presente trabajo se aborda el estudio de una cuenca sedimentaria mediante la utilización conjunta de técnicas de cartografía geológica y datos de subsuelo, provenientes del análisis de sondeos mecánicos y de la determinación de las anomalías de la gravedad. La cuenca presenta una geometría asimétrica en forma de semigraben orientado segun la dirección regional ENE-OSO, controlado por fallas normales en dicha dirección en su límite NO, mientras que por el SE está delimitado por una discordancia. La existencia de un sistema asociado de fracturas, ortogonalmente dispuestas, complica el dispositivo anterior, resultando un basamento estructurado en bloques que configuran pequeñas subcuencas. La modelización gravimétrica de la cuenca en 3D ha permitido obtener un modelo de gran resolución para la geometria del basamento. El modelo geofísico obtenido ha sido contrastado con los datos provenientes de los sondeos...

Lake-level and salinity reconstruction from diatom analyses in Quillagua Formation (Late Neogene, Central Andean Forearc, Northern Chile)

A sedimentary and micropaleontological study of the Quillagua Formation provides a detailed paleohydrological reconstruction of the lacustrine system which occupied the present-day hyperarid Quillagua-Llamara fore-arc Basin (Northern Chile) from lattermost Miocene to Early Pliocene times.

Determinación de la paleosalinidad, mediante la relación Br/Cl, en las sales de la cuenca potásica catalana (Sallent, Barcelona, España)

Debido a su acumdación en las salmueras de las cubetas de deposición evaporítica, el Br se concentra progresivamente en los ultimos precipitados de los cloruros. La relación Br/Cl ha sido utilizada (BOEKE y EITEL, 1923; D'ANS y KÜHN, 1944) para determinar variaciones en la concentración de la salmuera durante la deposición evaporítica. Para la determinación cuantitativa del Br y CL en varias muestras recogidas en la explotación de Sallent, se ha utilizado la fluorescencia de rayos X.

Características sedimentológicas y tipología de pliegues sinsedimentarios en liditas: el ejemplo de la plataforma siliciclástica paleozoica del Sarrabus (SE de la isla de Cerdeña, Italia)

This paper studies different black, banded siliceous rocks (lidites) from a Paleozoic unstable shelf (Sarrabus, Southeast Sardinia). These lidites were derived from submarine vents as a consequence of hydrothermal-sedimentary processes. The paper examines the sedimentological characteristics of lidites, studies the different types of associated synsedimentary folds and offers criteria for distinguishing lidites which take root in a vent (first type) from those which were glided through a paleoslope (second type).

Estructura y relleno sedimentario de la semifosa neógena de Vilanova (Garraf, Barcelona)

En el presente trabajo se aborda el estudio de una cuenca sedimentaria mediante la utilización conjunta de técnicas de cartografía geológica y datos de subsuelo, provenientes del análisis de sondeos mecánicos y de la determinación de las anomalías de la gravedad. La cuenca presenta una geometría asimétrica en forma de semigraben orientado segun la dirección regional ENE-OSO, controlado por fallas normales en dicha dirección en su límite NO, mientras que por el SE está delimitado por una discordancia. La existencia de un sistema asociado de fracturas, ortogonalmente dispuestas, complica el dispositivo anterior, resultando un basamento estructurado en bloques que configuran pequeñas subcuencas. La modelización gravimétrica de la cuenca en 3D ha permitido obtener un modelo de gran resolución para la geometria del basamento. El modelo geofísico obtenido ha sido contrastado con los datos provenientes de los sondeos...