Measuring sustained superior performance at the firm level

This paper proposes a two-dimensional Strategic Performance Measure (SPM) to evaluate the achievement of sustained superior performance. This proposal builds primarily on the fact that, under the strategic management perspective, a firm's prevalent objective is the pursuit of sustained superior performance. Three basicconceptual dimensions stem from this objective: relativity, sign dependence, and dynamism. These are the foundations of the SPM, which carries out a separate evaluation of the attained superior performance and of its sustainability over time. In contrast to existing measures of performance, the SPM provides: (i) a dynamic approach by considering the progress or regress in performance over time, and (ii) a cardinal measurement of performance differences and its changes over time. The paper also proposes an axiomatic framework that ameasure of strategic performance should comply with to be theoretically and managerially sound. Finally, anempirical illustration of the Spanish banking sector during 1987-1999 is herein provided by discussing some relevant case

Measuring the child mortality impact of official aid for fighting infectious diseases, 2000-2010

Aid for fighting infectious and parasitic diseases has had a statistically significant role in the under-five mortality reduction in the last decade. Point estimates indicate a country average reduction of 1.4 deaths per thousand under fives live-born attributable to aid at its average level in 2000-2010. The effect would be an average drop of 3.3 in the under-five mortality rate at the aid levels of 2010. By components, a dollar per capita spent in fighting malaria has caused the largest average impact, statistically higher than a dollar per capita spent in STD/HIV control. We do not find statistically significant effects of other infectious disease aid, including aid for the control of tuberculosis.

Irrigation performance and gross water productivity in furrow-irrigated ornamental tree production

In the ornamental plant production region of Girona (Spain), which is one of the largest of its kind in southern Europe, most of the surface is irrigated using wide blocked-end furrows. The objectives of this paper were: (1) to evaluate the irrigation scheduling methods used by ornamental plant producers; (2) to analyse different scenarios inorder to assess how they affect irrigation performance; (3) to evaluate the risk of deep percolation; and (4) to calculategross water productivity. A two-year study in a representative commercial field, planted with Prunus cerasifera ‘Nigra’, was carried out. The irrigation dose applied by the farmers was slightly smaller than the required water dose estimated by the use of two different methods: the first based on soil water content, and the second based on evapotranspiration. Distribution uniformity and application efficiency were high, with mean values above 87%. Soil water contentmeasurements revealed that even at the end of the furrow, where the infiltrated water depth was greatest, more than 90% of the infiltrated water was retained in the shallowest 40 cm of the soil; accordingly, the risk of water loss due to deep percolation was minimal. Gross water productivity for ornamental tree production was € 11.70 m–3, approximately 20 times higher than that obtained with maize in the same region

Energy dispersive X-Ray fluorescence : measuring elements in solid and liquid matrices

The subject of this project is about “Energy Dispersive X-Ray Fluorescence ” (EDXRF).This technique can be used for a tremendous variety of elemental analysis applications.It provides one of the simplest, most accurate and most economic analytical methods for thedetermination of the chemical composition of many types of materials.The purposes of this project are:- To give some basic information about Energy Dispersive X-ray Fluorescence.- To perform qualitative and quantitative analysis of different samples (water-dissolutions,powders, oils,..) in order to define the sensitivity and detection limits of the equipment.- To make a comprehensive and easy-to-use manual of the ‘ARL QUANT’X EnergyDispersive X-Ray Fluorescence’ apparatus

Hours worked - Productivity puzzle: identification in fractional integration settings

A recent finding of the structural VAR literature is that the response of hours worked to a technology shock depends on the assumption on the order of integration of the hours. In this work we relax this assumption, allowing for fractional integration and long memory in the process for hours and productivity. We find that the sign and magnitude of the estimated impulse responses of hours to a positive technology shock depend crucially on the assumptions applied to identify them. Responses estimated with short-run identification are positive and statistically significant in all datasets analyzed. Long-run identification results in negative often not statistically significant responses. We check validity of these assumptions with the Sims (1989) procedure, concluding that both types of assumptions are appropriate to recover the impulse responses of hours in a fractionally integrated VAR. However, the application of longrun identification results in a substantial increase of the sampling uncertainty. JEL Classification numbers: C22, E32. Keywords: technology shock, fractional integration, hours worked, structural VAR, identification

The effects of walking while working on productivity and health: a field experiment

Lack of physical activity can cause health problems and diminish organizational productivity. We conducted a 12-months long field experiment in a financial services company to study the effects of slow-moving treadmills outfitted for office work on employee productivity and health. 43 sedentary volunteers were assigned randomly to two groups to receive treadmill workstations 7 months apart. Employees could opt at will for standard chair-desk arrangement. Biometric measurements were taken quarterly and weekly online performance surveys were administered to study participants and to more than 200 non-participants and their supervisors.In this study we explore three questions concerning the effects of the introduction of treadmills in the workplace. (1) Does it improve overall physical activity? (2) Does it improve health measures? (3) Does it improve performance? The answers are as follows. (1) Yes (net effect of almost half an hour a day). (2) Yes (small gains, one minor decline). (3) No and yes (initial decline followed by increase to recover to initial level within one year) – based on weekly employee self reports.

Social capital and cognitive attainment

We review the different meanings that researchers have given to theconcept of social capital, differentiate four types – bridging, bonding,linking, and overheads –, and discuss their different functions as public,club, and common goods.For each form of social capital we distinguish its productivity (acollective characteristic) from the factors that account for individual’sdifferential access to its returns, and propose alternative ways formeasuring each.We show the utility of our theoretical and measuring approach byanalyzing the impact of the each form of social capital on 15 year-oldstudents’ cognitive attainment across OECD countries, using 2006 PISAdata.The results show that students’ cognitive attainments are a direct functionof the richness or productivity of each form of social capital and ofstudents’ degree of access to each.

Productivity Growth during the English Industrial Revolution: A Dual Approach

This paper presents new estimates of total factor productivity growth in Britain for the period 1770-1860. We use a dual technique recently popularized by Hsieh (1999), and argue that the estimates we derive from factor prices are of similar quality to quantity-based calculations. Our results provide further evidence, derived from this independent set of sources, that productivity growth during the British Industrial Revolution was relatively slow. During the years 1770-1800, TFP growth was close to zero, according to our estimates. The period 1800-1830 experienced an acceleration of productivity growth. The Crafts-Harley view of the Industrial Revolution is thus reinforced. We also consider alternative explanations of slow productivity growth, and reject the interpretation that focuses on the introduction of steam as a general purpose technology.

Pitfalls to Avoid when Measuring Institutions: Is 'Doing Business' Damaging Business?

Over recent years, both governments and international aid organizations have been devoting large amounts of resources to "simplifying" the procedures for setting up and formalizing firms. Many of these actions have focused on reducing the initial costs of setting up the firm, disregarding the more important role of business registers as a source of reliable information for judges, government departments and, above all, other firms. This reliable information is essential for reducing transaction costs in future dealings with all sorts of economic agents, both public and private. The priorities of reform policies should therefore be thoroughly reviewed, stressing the value of the legal institutions rather than trivializing them as is often the case.

The effects of structural reforms on productivity and profitability enhancing reallocation: Evidence from Colombia

Estimates for the U.S. suggest that at least in some sectors productivity enhancing reallocationis the dominant factor in accounting for producitivity growth. An open question, particularlyrelevant for developing countries, is whether reallocation is always productivity enhancing. Itmay be that imperfect competition or other barriers to competitive environments imply that thereallocation process is not fully e?cient in these countries. Using a unique plant-levellongitudinal dataset for Colombia for the period 1982-1998, we explore these issues byexamining the interaction between market allocation, and productivity and profitability.Moreover, given the important trade, labor and financial market reforms in Colombia during theearly 1990's, we explore whether and how the contribution of reallocation changed over theperiod of study. Our data permit measurement of plant-level quantities and prices. Takingadvantage of the rich structure of our price data, we propose a sequential mehodology to estimateproductivity and demand shocks at the plant level. First, we estimate total factor productivity(TFP) with plant-level physical output data, where we use downstream demand to instrumentinputs. We then turn to estimating demand shocks and mark-ups with plant-level price data, usingTFP to instrument for output in the inversedemand equation. We examine the evolution of thedistributions of TFP and demand shocks in response to the market reforms in the 1990's. We findthat market reforms are associated with rising overall productivity that is largely driven byreallocation away from low- and towards highproductivity businesses. In addition, we find thatthe allocation of activity across businesses is less driven by demand factors after reforms. Wefind that the increase in aggregate productivity post-reform is entirely accounted for by theimproved allocation of activity.

Productivity and the welfare of nations

We show that the welfare of a representative consumer can be related to observable aggregatedata. To a first order, the change in welfare is summarized by (the present value of) the Solowproductivity residual and by the growth rate of the capital stock per capita. We also show thatproductivity and the capital stock suffice to calculate differences in welfare across countries, withboth variables computed as log level deviations from a reference country. These results hold forarbitrary production technology, regardless of the degree of product market competition, and applyto open economies as well if TFP is constructed using absorption rather than GDP as the measureof output. They require that TFP be constructed using prices and quantities as perceived byconsumers. Thus, factor shares need to be calculated using after-tax wages and rental rates, andwill typically sum to less than one. We apply these results to calculate welfare gaps and growthrates in a sample of developed countries for which high-quality TFP and capital data are available.We find that under realistic scenarios the United Kingdom and Spain had the highest growth ratesof welfare over our sample period of 1985-2005, but the United States had the highest level ofwelfare.

Spinning welfare: The gains from process innovation in cotton and car production

Economists and economic historians want to know how much better life is today than in the past.Fifty years ago economic historians found surprisingly small gains from 19th century US railroads,while more recently economists have found relatively large gains from electricity, computers and cellphones. In each case the implicit or explicit assumption is that researchers were measuring the valueof a new good to society. In this paper we use the same techniques to find the value to society ofmaking existing goods cheaper. Henry Ford did not invent the car, and the inventors of mechanisedcotton spinning in the industrial revolution invented no new product. But both made existing productsdramatically cheaper, bringing them into the reach of many more consumers. That in turn haspotentially large welfare effects. We find that the consumer surplus of Henry Ford s production linewas around 2% by 1923, 15 years after Ford began to implement the moving assembly line, while themechanisation of cotton spinning was worth around 6% by 1820, 34 years after its initial invention.Both are large: of the same order of magnitude as consumer expenditure on these items, and as largeor larger than the value of the internet to consumers. On the social savings measure traditionally usedby economic historians, these process innovations were worth 15% and 18% respectively, makingthem more important than railroads. Our results remind us that process innovations can be at least asimportant for welfare and productivity as the invention of new products.

The vanishing procyclicality of labor productivity

We document three changes in postwar US macroeconomic dynamics: (i) theprocyclicality of labor productivity has vanished, (ii) the relative volatility of employment has risen, and (iii) the relative (and absolute) volatility of the real wagehas risen. We propose an explanation for all three changes that is based on a common source: a decline in labor market frictions. We develop a simple model withlabor market frictions, variable effort, and endogenous wage rigidities to illustratethe mechanisms underlying our explanation. We show that the reduction in frictionsmay also have contributed to the observed decline in output volatility.