Retrieving Cloud Characteristics from Ground-Based Daytime Color All-Sky Images

A discussion is presented of daytime sky imaging and techniques that may be applied to the analysis of full-color sky images to infer cloud macrophysical properties. Descriptions of two different types of skyimaging systems developed by the authors are presented, one of which has been developed into a commercially available instrument. Retrievals of fractional sky cover from automated processing methods are compared to human retrievals, both from direct observations and visual analyses of sky images. Although some uncertainty exists in fractional sky cover retrievals from sky images, this uncertainty is no greater than that attached to human observations for the commercially available sky-imager retrievals. Thus, the application of automatic digital image processing techniques on sky images is a useful method to complement, or even replace, traditional human observations of sky cover and, potentially, cloud type. Additionally, the possibilities for inferring other cloud parameters such as cloud brokenness and solar obstruction further enhance the usefulness of sky imagers

Influence of emergence timing of weeds on the establishment of woody natives and ground cover species

Les invasions biològiques són produïdes per espècies transportades per l'home fora de la regió d'origen a altres regions on s'estableixen i expandeixen. Són actualment de les majors causes de perduda de biodiversitat, amb el canvi d'usos del sòl, tret rellevant en zones insulars. Comprendre mecanismes de competència amb les espècies autòctones és clau per gestionar el problema. L’experiment evidencia diferències de creixement de 7 plantes natives australianes (3 espècies d’eucaliptus, 3 espècies d’acàcia, 1 pasturatge natiu), competint intraespecífica (entre mateixa espècie) i interespecíficament (acàcies o eucaliptus convivint amb pasturatge natiu) plantejant tres tractaments (sense males herbes, males herbes i males herbes a posteriori) per definir la naturalesa de la interacció dels diferents tipus funcionals d'espècies. S’analitzen tendències temporals de creixement de plàntules, així com la supervivència. S’ha detectat una moderada correlació entre taxes de creixement d’espècies i mida de la llavor, (p ≈ 0.6), així com una correlació entre la supervivència i la humitat del sòl (p ≈ 0.5); efectes estacionals. A curt termini i en escenari de primavera la convivència amb males herbes reporta creixement nul. Tractaments sense males herbes, presenten major supervivència en escenaris en competència interespecífica. A llarg termini les espècies amb major supervivència són les que conviuen amb pasturatge natiu i sense males herbes, indicant un efecte beneficiós en espècies millor adaptades a la sequera (E. loxophleba).

A design for an advanced architecture of satellite ground segments

This project proposes a preliminary architectural design for a control and data processing center, also known as 'ground segment', for Earth observation satellites.

Measuring gait using a ground laser range sensor

This paper describes a mesurement system designed to register the displacement of the legs using a two-dimensional laser range sensor with a scanning plane parallel to the ground and extract gait parameters. In the proposed methodology, the position of the legs is estimated by fitting two circles with the laser points that define their contour and the gait parameters are extracted applying a step-line model to the estimated displacement of the legs to reduce uncertainty in the determination of the stand and swing phase of the gait. Results obtained in a range up to 8 m shows that the systematic error in the location of one static leg is lower than 10 mm with and standard deviation lower than 8 mm; this deviation increases to 11 mm in the case of a moving leg. The proposed measurement system has been applied to estimate the gait parameters of six volunteers in a preliminary walking experiment.

Real-time tree-foliage surface estimation using a ground laser scanner

The optimization of most pesticide and fertilizer applications is based on overall grove conditions. In this work we measurements. Recently, Wei [9, 10] used a terrestrial propose a measurement system based on a ground laser scanner to LIDAR to measure tree height, width and volume developing estimate the volume of the trees and then extrapolate their foliage a set of experiments to evaluate the repeatability and surface in real-time. Tests with pear trees demonstrated that the accuracy of the measurements, obtaining a coefficient of relation between the volume and the foliage can be interpreted as variation of 5.4% and a relative error of 4.4% in the linear with a coefficient of correlation (R) of 0.81 and the foliar estimation of the volume but without real-time capabilities. surface can be estimated with an average error less than 5 %.

Three-step pathway engineering results in more incidence rate and higher emission of nerolidol and improved attraction of Diadegma semiclausum

The concentration and ratio of terpenoids in the headspace volatile blend of plants have a fundamental role in the communication of plants and insects. The sesquiterpene (E)-nerolidol is one of the important volatiles with effect on beneficial carnivores for biologic pest management in the field. To optimize de novo biosynthesis and reliable and uniform emission of (E)-nerolidol, we engineered different steps of the (E)-nerolidol biosynthesis pathway in Arabidopsis thaliana. Introduction of a mitochondrial nerolidol synthase gene mediates de novo emission of (E)-nerolidol and linalool. Co-expression of the mitochondrial FPS1 and cytosolic HMGR1 increased the number of emitting transgenic plants (incidence rate) and the emission rate of both volatiles. No association between the emission rate of transgenic volatiles and their growth inhibitory effect could be established. (E)-Nerolidol was to a large extent metabolized to non-volatile conjugates.

Architectural characterization of a delta-front reservoir analogue combining ground penetrating radar and electrical resistivity tomography: Roda Sandstone (Lower Eocene, Graus-Tremp basin, Spain)

Three-dimensional reconstruction of reservoir analogues can be improved combining data from different geophysical methods. Ground Penetrating Radar (GPR) and Electrical Resistivity Tomography (ERT) data are valuable tools, since they provide subsurface information from internal architecture and facies distribution of sedimentary rock bodies, enabling the upgrading of depositional models and heterogeneity reconstruction. The Lower Eocene Roda Sandstone is a well-known deltaic complex widely studied as a reservoir analogue that displays a series of sandstone wedges with a general NE to SW progradational trend. To provide a better understanding of internal heterogeneity of a 10m-thick progradational delta-front sandstone unit, 3D GPR data were acquired. In addition, common midpoints (CMP) to measure the sandstone subsoil velocity, test profiles with different frequency antennas (25, 50 and 100MHz) and topographic data for subsequent correction in the geophysical data were also obtained. Three ERT profiles were also acquired to further constrain GPR analysis. These geophysical results illustrate the geometry of reservoir analogue heterogeneities both depositional and diagenetic in nature, improving and complementing previous outcrop-derived data. GPR interpretation using radar stratigraphy principles and attributes analysis provided: 1)tridimensional geometry of major stratigraphic surfaces that define four units in the GPR Prism, 2) image the internal architecture of the units and their statistical study of azimuth and dips, useful for a quick determination of paleocurrent directions. These results were used to define the depositional architecture of the progradational sandbody that shows an arrangement in very-high-frequency sequences characterized by clockwise paleocurrent variations and decrease of the sedimentary flow, similar to those observed at a greater scale in the same system. This high-frequency sequential arrangement has been attributed to the autocyclic dynamics of a supply-dominated delta- front where fluvial and tidal currents are in competition. The resistivity models enhanced the viewing of reservoir quality associated with cement distribution caused by depositional and early diagenetic processes related to the development of transgressive and regressive systems tracts in igh-frequency sequences.

Engineering Geology for Society and Territory: volume 2: landslide processes

This book is one out of 8 IAEG XII Congress volumes, and deals with Landslide processes, including: field data and monitoring techniques, prediction and forecasting of landslide occurrence, regional landslide inventories and dating studies, modeling of slope instabilities and secondary hazards (e.g. impulse waves and landslide-induced tsunamis, landslide dam failures and breaching), hazard and risk assessment, earthquake and rainfall induced landslides, instabilities of volcanic edifices, remedial works and mitigation measures, development of innovative stabilization techniques and applicability to specific engineering geological conditions, use of geophysical techniques for landslide characterization and investigation of triggering mechanisms. Focuses is given to innovative techniques, well documented case studies in different environments, critical components of engineering geological and geotechnical investigations, hydrological and hydrogeological investigations, remote sensing and geophysical techniques, modeling of triggering, collapse, runout and landslide reactivation, geotechnical design and construction procedures in landslide zones, interaction of landslides with structures and infrastructures and possibility of domino effects. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues, and approaches.

Cardiac tissue engineering by electrical stimulation with subcutaneous and cardiac adipose-tissue derived progenitor cells (ATDPCs)

A major challenge of cardiac tissue engineering is directing cells to establish the physiological structure and function of the myocardium being replaced. In native heart, pacing cells generate electrical stimuli that spread throughout the heartcausing cell membrane depolarization and activation of contractile apparatus. We ought to examine whether electricalstimulation of adipose tissue-derived progenitor cells (ATDPCs) exerts phenotypic and genetic changes that enhance theircardiomyogenic potential.

Students’ viewpoint on engineering subjects taught in English

The European Educational Institutions have the challenge and the commitment to enhance multilingual competence and teaching curricular subjects in a foreign language is seen as one of the most promising alternatives. In that context, professors teaching different engineering subjects at the School of Engineering of the UPC at Manresa (EPSEM) have been involved in projects aiming at analyzing the current linguistic situation and developing some on-line open access materials using CLIL as a strategy. They formed the u-Linguatech Research Group on Multilingual Communication in Science and Technology in order to provide such resources in an effective and efficient way. In this paper, we focus on students’ perception of the improvement of their multilingual competence throughout their Engineering degree, by means of subjects taught in English by non-native speakers. Data about the English level of current students are taken into account. We also describe the use of the above resources to improve the quality of subjects learning related to Chemical Engineering curricula.

The unfathomable secret remains: a reverse engineering study of SEO factors on Google's search engine

The vast majority of users don’t seek results beyond the second page offered by the search engine, so if a site fails to be among the top 20 (second page), it says that this page does not have good SEO and, therefore, is not visible to the user. The overall objective of this project is to conduct a study to discover the factors that determine (or not) the positioning of websites in a search engine.

International journal of engineering education

This work presents an analysis of the assessment tools used by professors at the Universitat Politécnica de Catalunya to assess the generic competencies introduced in the Bachelor’s Degrees in Engineering. In order to conduct this study, a survey was designed and administered anonymously to a sample of the professors most receptive to educational innovation at their own university. All total, 80 professors responded to this survey, of whom 26% turned out to be members of the university’s own evaluation innovation group (https://www.upc.edu/rima/grups/grapa), GRAPA. This percentage represents 47% of the total GRAPA membership, meaning that nearly half of the professors most concerned about evaluation at the university chose to participate. The analysis of the variables carried out using the statistical program SPSS v19 shows that for practically 49% of those surveyed, rubrics are the tools most commonly used to assess generic competencies integrated in more specific ones. Of those surveyed, 60% use them either frequently or always. The most frequently evaluated generic competencies were teamwork (28%), problem solving (26%), effective oral and written communication (24%) and autonomous learning (13%), all of which constitute commonly recognized competencies in the engineering profession. A two-dimensional crosstabs analysis with SPSS v19 shows a significant correlation (Asymp. Sig. 0.001) between the type of tool used and the competencies assessed. However, no significant correlation was found between the type of assessment tool used and the type of subject, type of evaluation (formative or summative), frequency of feedback given to the students or the degree of student satisfaction, and thus none of these variables can be considered to have an influence on the kind of assessment tool used. In addition, the results also indicate that there are no significant differences between the instructors belonging to GRAPA and the rest of those surveyed

A virtual mathematics learning environment for engineering students

Teachers of the course Introduction to Mathematics for Engineers at the UOC, an online distance-learning university, have designed,developed and tested an online studymaterial. It includes basic pre-university mathematics, indications for correct follow-up of this content and recommendations for finding appropriate support and complementarymaterials. Many different resources are used,depending on the characteristics of thecontents: Flash sequences, interactive applets, WIRIS calculators and PDF files.During the last semester, the new study material has been tested with 119 students. The academic results and student satisfaction have allowed us to outline and prioritise future lines of action.

A Virtual Mathematics Learning Environment for Engineering Students

Teachers of the course Introduction to Mathematics for Engineers at the UOC, an online distance-learning university, have designed and produced online study material which includes basic pre-university mathematics, instructions for correct follow-up of this content and recommendations for finding appropiate support and complementary materials.