A hybrid method for sag source location in power network

The work presented in this paper belongs to the power quality knowledge area and deals with the voltage sags in power transmission and distribution systems. Propagating throughout the power network, voltage sags can cause plenty of problems for domestic and industrial loads that can financially cost a lot. To impose penalties to responsible party and to improve monitoring and mitigation strategies, sags must be located in the power network. With such a worthwhile objective, this paper comes up with a new method for associating a sag waveform with its origin in transmission and distribution networks. It solves this problem through developing hybrid methods which hire multiway principal component analysis (MPCA) as a dimension reduction tool. MPCA reexpresses sag waveforms in a new subspace just in a few scores. We train some well-known classifiers with these scores and exploit them for classification of future sags. The capabilities of the proposed method for dimension reduction and classification are examined using the real data gathered from three substations in Catalonia, Spain. The obtained classification rates certify the goodness and powerfulness of the developed hybrid methods as brand-new tools for sag classification

Assentar els fonaments per a implantar un sistema d’assegurament intern de la qualitat en el Departament d’Arquitectura de Computadors

La gestió de la qualitat aplicada a les administracions públiques forma part del estat de la organització i del seu entorn, així com de la demanda de la societat. La organització doncs, ha de vetllar per a aconseguir la millora contínua i encetar el camí de la excel.lència. Aquest projecte que presento informa de la situación actual respecte de la gestió en el Departament d’Arquitectura de Computadors tenint en compte tots els seus àmbits competencials. La finalitat és establir una estratègia orientada a resultats per tal de donar resposta a les expectatives dels seus membres i als usuaris potencials de tal forma que permeti garantir els serveis oferts.

Identificació de marcadors biològics amb potencial per a l’optimització sensorial i tecnològica de la carn de porc i pernil curat

L’aplicació de tecnologies innovadores per a l’anàlisi de la qualitat (proteòmica) i per al processat de productes carnis (envasament actiu i altes pressions hidrostàtiques) amb la finalitat d’optimitzar la qualitat i la seguretat de productes carnis llestos per al consum fou evaluat. Els resultats obtinguts amb l’anàlisi proteòmic van permetre la detecció de pèptids/ proteïnes candidats a marcadors proteics de la qualitat dels lloms i dels pernils. La detecció d’aquests marcadors a la matèria primera (llom i pernil fresc) ajudaria a predir la qualitat final dels productes carnis processats (llom cuit i pernil curat), i proporcionaria una eina per al control de la qualitat de la carn de porc. No obstant, la validació del paper d’aquestes proteïnes a la qualitat final dels productes carnis és necessària abans de poder-los considerar marcadors proteics. Per altra banda, es va estudiar la possiblitat de millorar la seguretat alimentària de llonganissa sense sal afegida obtinguda amb el procés QDS® process a través l’ús de tecnologies innovadores (envasament actiu i altes pressions hidrostàtiques). La llonganissa sense sal afegida no va permetre el creixement de L. monocytogenes. No obstant, el patogen seria capaç de sobreviure durant la vida útil del producte en cas de recontaminació. L’envasament antimicrobià amb la inclusió de nisina com a antimicrobià natural es pot considerar un mètode efectiu per a millorar la seguretat de la llonganissa estudiada. L. monocytogenes va sobreviure al tractament d’alta pressió hidrostàtica (600 MPa, 5 min, 12ºC) gràcies a les característiques del producte de baixa activitat d’aigua i presència de lactat a la seva formulació. Per aquest motiu, la APH no es consideraria un tractament apropiat per a reduir la presència de L. monocytogenes en aquest tipus de producte.

Improving social measurements: the experience of the ESS first rounds in Spain

With the two aims of monitoring social change and improving social measurement, the European Social Survey is now closing its third round. This paper shows how the accumulated experience of the two first rounds has been used to validate the questionnaire, better adapt the sampling design to the country characteristics and efficiently commit fieldwork in Spain. For example, the dynamic character of the population nowadays makes necessary to estimated design effects at each round from the data of the previous round. The paper also demonstrates how, starting with a response rate of 52% at first round, a 66% response rate is achieved at the third round thanks to an extensive quality control conducted by the polling agency and the ESS national team and based on a detailed analysis of the non-response cases and the incidences reported by the interviewed in the contact form.

Improving social measurements: The experience of the ESS first rounds in Spain

With the two aims of monitoring social change and improving social measurement, the European Social Survey is now closing its third round. This paper shows how the accumulated experience of the two first rounds has been used to validate the questionnaire, better adapt the sampling design to the country characteristics and efficiently commit fieldwork in Spain. For example, the dynamic character of the population nowadays makes necessary to estimated design effects at each round from the data of the previous round. The paper also demonstrates how, starting with a response rate of 52% at first round, a 66% response rate is achieved at the third round thanks to an extensive quality control conducted by the polling agency and the ESS national team and based on a detailed analysis of the non-response cases and the incidences reported by the interviewed in the contact form.

Innovació empresarial en el procés de transmissió de dades mitjançant una aplicació mòbil

Disposar d’informació de qualitat, en el moment oportú i en el volum adequat és el que actualment necessiten les empreses per poder prendre decisions òptimes. L’empresa JCM Technologies no és una excepció i és en la obtenció d’informació del procés productiu de l’empresa on aquest projecte pren part. L’objectiu d’aquest projecte de final de màster ha consistit en desenvolupar un sistema capaç d’aportar a l’empresa informació sobre els resultats obtinguts durant el control de qualitat dels productes, informació de la qual no disposava. Les dades existien però no es podien convertir en informació valuosa perquè no es disposava d’un mecanisme capaç tractar-les. Per complir els objectius marcats s’ha creat un sistema format pels següents elements: una aplicació per dispositius mòbils Android, una base de dades, un nou programa pel control de la qualitat i aplicatiu servidor. L’aplicació permet obtenir i visualitzar la informació. La base de dades és on es guarda la informació que envia el programa del control de qualitat i finalment, l’aplicatiu servidor habilita la comunicació entre els diferents elements descrits. El fet que dóna valor al sistema és que tots els elements que el formen tenen la capacitat de comunicar-se entre ells mitjançant Internet. Gràcies a això, és possible obtenir informació a temps real de la producció que s’està portant a terme a qualsevol punt del món. En conclusió, cal dir que els objectius s’han complert ja que s’ha aconseguit un sistema ràpid i segur. D’aquesta manera JCM Technologies pot disposar d’una informació molt valuosa que li permet que certes decisions no siguin preses a l’atzar.

Stationarity analysis of historical flood series in France and Spain (14th-20th centuries)

Interdisciplinary frameworks for studying natural hazards and their temporal trends have an important potential in data generation for risk assessment, land use planning, and therefore the sustainable management of resources. This paper focuses on the adjustments required because of the wide variety of scientific fields involved in the reconstruction and characterisation of flood events for the past 1000 years. The aim of this paper is to describe various methodological aspects of the study of flood events in their historical dimension, including the critical evaluation of old documentary and instrumental sources, flood-event classification and hydraulic modelling, and homogeneity and quality control tests. Standardized criteria for flood classification have been defined and applied to the Isère and Drac floods in France, from 1600 to 1950, and to the Ter, the Llobregat and the Segre floods, in Spain, from 1300 to 1980. The analysis on the Drac and Isère data series from 1600 to the present day showed that extraordinary and catastrophic floods were not distributed uniformly in time. However, the largest floods (general catastrophic floods) were homogeneously distributed in time within the period 1600¿1900. No major flood occurred during the 20th century in these rivers. From 1300 to the present day, no homogeneous behaviour was observed for extraordinary floods in the Spanish rivers. The largest floods were uniformly distributed in time within the period 1300-1900, for the Segre and Ter rivers.

Modelling of weather radar echoes from anomalous propagation using a hybrid parabolic equation method and NWP model data

Contamination of weather radar echoes by anomalous propagation (anaprop) mechanisms remains a serious issue in quality control of radar precipitation estimates. Although significant progress has been made identifying clutter due to anaprop there is no unique method that solves the question of data reliability without removing genuine data. The work described here relates to the development of a software application that uses a numerical weather prediction (NWP) model to obtain the temperature, humidity and pressure fields to calculate the three dimensional structure of the atmospheric refractive index structure, from which a physically based prediction of the incidence of clutter can be made. This technique can be used in conjunction with existing methods for clutter removal by modifying parameters of detectors or filters according to the physical evidence for anomalous propagation conditions. The parabolic equation method (PEM) is a well established technique for solving the equations for beam propagation in a non-uniformly stratified atmosphere, but although intrinsically very efficient, is not sufficiently fast to be practicable for near real-time modelling of clutter over the entire area observed by a typical weather radar. We demonstrate a fast hybrid PEM technique that is capable of providing acceptable results in conjunction with a high-resolution terrain elevation model, using a standard desktop personal computer. We discuss the performance of the method and approaches for the improvement of the model profiles in the lowest levels of the troposphere.

The situation of open access institutional repositories in Spain: 2009 report

Introduction. The DRIVER I project drew up a detailed report of European repositories based on data gathered in a survey in which Spain's participation was very low. This created a highly distorted image of the implementation of repositories in Spain. This study aims to analyse the current state of Spanish open-access institutional repositories and to describe their characteristics. Method. The data were gathered through a Web survey. The questionnaire was based on that used by DRIVER I: coverage; technical infrastructure and technical issues; institutional policies; services created; and stimulators and inhibitors for establishing, filling and maintaining their digital institutional repositories. Analysis. Data were tabulated and analysed systematically according responses obtained from the questionnaire and grouped by coverage. Results. Responses were obtained from 38 of the 104 institutions contacted, which had 29 institutional repositories. This represents 78.3% of the Spanish repositories according to the BuscaRepositorios directory. Spanish repositories contained mainly full-text materials (journal articles and doctoral theses) together with metadata. The software most used was DSpace, followed by EPrints. The metadata standard most used was Dublin Core. Spanish repositories offered more usage statistics and fewer author-oriented services than the European average. The priorities for the future development of the repositories are the need for clear policies on access to scientific production based on public funding and the need for quality control indicators. Conclusions.This is the first detailed study of Spanish institutional repositories. The key stimulants for establishing, filling and maintaining were, in order of importance, the increase of visibility and citation, the interest of decision-makers, simplicity of use and search services. On the other hand the main inhibitors identified were the absence of policies, the lack of integration with other national and international systems and the lack of awareness efforts among academia.

Paràmetres i indicadors de qualitat en l'avaluació d'una revista electrònica. El cas de BiD: textos universitaris de biblioteconomia i documentació

L'objectiu de l'article és l'establiment d'un conjunt de paràmetres i indicadors que permetin l'avaluació de revistes electròniques accessibles via web. La metodologia emprada consisteix a analitzar els paràmetres i indicadors genèrics descrits per Lluís Codina i concretar-los, a partir d'exemples, perquè puguin ser aplicats en un recurs web específic: una revista electrònica. Una vegada definits els indicadors específics, es procedirà a avaluar la revista BiD, de la Facultat de Biblioteconomia i Documentació de la Universitat de Barcelona, amb la finalitat de comprovar-ne la funcionalitat. Del resultat de l'estudi, es destaquen els punts febles que presenta actualment la revista i s'estableix un conjunt de propostes destinades a millorar-los.